检索结果-南通市图书馆

Transient Stability Analysis of Grid-connected Converters in Wind Turbine Systems Based on Linear Lyapunov Function and Reverse-time Trajectory

引用

Journal of Modern Power Systems and Clean Energy 2024年第3期12卷 782-790页

作者： Mohammad Kazem Bakhshizadeh Sujay Ghosh Guangya Yang ?ukasz Kocewiak ?rsted Wind Power A/S the technical university of Denmark

As the proportion of converter-interfaced renewable energy resources in the power system is increasing, the strength of the power grid at the connection point of wind turbine generators(WTGs) is gradually weakening. Existing research has shown that when connected with the weak grid, the stability of the traditional grid-following controlled converters will deteriorate, and they are prone to unstable phenomena such as oscillation. Due to the limitations of linear analysis that cannot sufficiently capture the stability phenomena, transient stability must be investigated. So far, standalone time-domain simulations or analytical Lyapunov stability criteria have been used to investigate transient stability. However, the time-domain simulations have proven to be computationally too heavy, while analytical methods are difficult to formulate for larger systems, require many modelling assumptions, and are often conservative in estimating the stability boundary. This paper proposes and demonstrates an innovative approach to estimating the transient stability boundary via combining the linear Lyapunov function and the reverse-time trajectory technique. The proposed methodology eliminates the need of time-consuming simulations and the conservative nature of Lyapunov functions. This study brings out the clear distinction between the stability boundaries with different post-fault active current ramp rate controls. At the same time, it provides a new perspective on critical clearing time for wind turbine systems. The stability boundary is verified using time-domain simulation studies.

关键词： Power system stability Trajectory Stability criteria Transient analysis Dynamical systems Time-domain analysis Wind turbines

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Gust response of an elasto-flexible morphing wing using fluid–structure interaction simulations

引用

Chinese Journal of Aeronautics 2024年第2期37卷 45-57页

作者： Jonathan PFLÜGER Christian BREITSAMTER Department of Mechanical Engineering Technical University of MunichGarching 85748Germany

Small and micro unmanned aircraft are the focus of scientific interest due to their wide range of applications.They often operate in a highly unstable flight environment where the application of new morphing wing technologies offers the opportunity to improve flight characteristics.The investigated concept comprises port and starboard adjustable wings,and an adaptive elastoflexible membrane serves as the lifting surface.The focus is on the benefits of the deforming membrane during the impact of a one-minus-cosine type gust.At a low Reynolds number of Re=264000,the morphing wing model is investigated numerically by unsteady fluid-structure interaction simulations.First,the numerical results are validated by experimental data from force and moment,flow field,and deformation measurements.Second,with the rigid wing as the baseline,the flexible case is investigated,focusing on the advantages of the elastic membrane.For all configurations studied,the maximum amplitude of the lift coefficient under gust load shows good agreement between the experimental and numerical results.During the decay of the gust,they differ more the higher the aspect ratio of the wing.When considering the flow field,the main differences are due to the separation behavior on the upper side of the wing.The flow reattaches earlier in the experiments than in the simulations,which explains the higher lift values observed in the former.Only at one intermediate configuration does the lift amplitude of the rigid configuration exceeds that of the flexible by about 12%,with the elastic membrane resulting in a smaller and more uniform peak load,which is also evident in the wing loading and hence in the root bending moment.

关键词： Membrane wing Morphing wing Flexible wing surface Computational fluid dynam-ics Fluid-structure interaction Unsteady inflow condition Gust response

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Investigation of micro-scale shear response of sand–rubber granule mixture in terms of particle shape and grain scale deformability effects

引用

Particuology 2024年第7期90卷 452-469页

作者： Abdulmuttalip Ari Suat Akbulut Department of Civil Engineering Yildiz Technical UniversityIstanbul34220Turkey

In this study,the effects of particle shape of rigid sand and soft rubber materials on macro-scale shear response were reasoned based on micro-scale parameters.For this purpose,first,the shape properties of three different sand and two different rubber samples were quantified using image processing techniques,and the contact model parameters were calibrated through physical experiments.The direct shear test was simulated in a two-dimensional discrete element software with realistic particle forms.The soft nature of rubber particles was reflected using body-centered cubic packing with a linear-parallel bond contact model.As a result,coordination number,distribution of contact forces(i.e.,strong contact,and fabric anisotropy),and contact sliding were derived by the numerical analyses.It has been observed that the particle shape leads to distinctive micro-scale responses due to the variations in the stiffness of the contacts.

关键词： Particle shape Sand Rubber Shear response Micro-scale response Discrete element method

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Ink-structing the future of vascular tissue engineering:a review of the physiological bioink design

引用

Bio-Design and Manufacturing 2024年第2期7卷 181-205页

作者： Judith Synofzik Sebastian Heene Rebecca Jonczyk Cornelia Blume Institute for technical Chemistry Leibniz University Hannover30167 HannoverGermany

Three-dimensional(3D)printing and bioprinting have come into view for a plannable and standardizable generation of implantable tissue-engineered constructs that can substitute native tissues and organs.These tissue-engineered structures are intended to integrate with the patient’s body.Vascular tissue engineering(TE)is relevant in TE because it supports the sustained oxygenization and nutrition of all tissue-engineered constructs.Bioinks have a specific role,representingthenecessarymedium for printability and vascular cell growth.This review aims to understand the requirements for the design of vascular bioinks.First,an in-depth analysis of vascular cell interaction with their native environment must be gained.A physiological bioink suitable for a tissue-engineered vascular graft(TEVG)must not only ensure good printability but also induce cells to behave like in a native vascular vessel,including self-regenerative and growth functions.This review describes the general structure of vascular walls with wall-speciﬁc cell and extracellular matrix(ECM)components and biomechanical properties and functions.Furthermore,the physiological role of vascular ECM components for their interaction with vascular cells and the mode of interaction is introduced.Diverse currently available or imaginable bioinks are described from physiological matrix proteins to nonphysiologically occurring but natural chemical compounds useful for vascular bioprinting.The physiological performance of these bioinks is evaluated with regard to biomechanical properties postprinting,with a view to current animal studies of 3D printed vascular structures.Finally,the main challenges for further bioink development,suitable bioink components to create a self-assembly bioink concept,and future bioprinting strategies are outlined.These concepts are discussed in terms of their suitability to be part of a TEVG with a high potential for later clinical use.

关键词： Vascular wall histology Vascular cells Microenvironment Extracellular matrix Cell–matrix interaction Bioink Printability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Antibiotic ciprofloxacin removal from aqueous solutions by electrochemically activated persulfate process:Optimization,degradation pathways,and toxicology assessment

引用

Journal of Environmental Sciences 2024年第9期143卷 85-98页

作者： Elif Yakamercan Ahmet Aygün Halis Simsek Environmental Engineering Department Bursa Technical UniversityBursaTurkey Agricultural and Biological Engineering Department Purdue UniversityWest LafayetteINUSA

Ciprofloxacin(CIP)is a commonly used antibiotic in the fluoroquinolone group and is widely used in medical and veterinary medicine disciplines to treat bacterial infections.When CIP is discharged into the sewage system,it cannot be removed by a conventional wastewater treatment plant because of its recalcitrant characteristics.In this study,boron-doped diamond anode and persulfate were used to degrade CIP in an aquatic solution by creating an electrochemically activated persulfate(EAP)process.Ironwas added to the system as a coactivator and the process was called EAP+Fe.The effects of independent variables,including pH,Fe^(2+),persulfate concentration,and electrolysis time on the systemwere optimized using the response surface methodology.The results showed that the EAP+Fe process removed 94%of CIP under the following optimum conditions:A pH of 3,persulfate/Fe^(2+)concentration of 0.4 mmol/L,initial CIP concentration 30 mg/L,and electrolysis time of 12.64 min.CIP removal efficiency was increased from 65.10%to 94.35%by adding Fe^(2+)as a transition metal.CIP degradation products,7 pathways,and 78 intermediates of CIP were studied,and three of those intermediates(m/z 298,498,and 505)were reported.The toxicological analysis based on toxicity estimation software results indicated that some degradation products of CIP were toxic to targeted animals,including fathead minnow,Daphnia magna,Tetrahymena pyriformis,and rats.The optimumoperation costswere similar in EAP and EAP+Fe processes,approximately 0.54€/m^(3).

关键词： Ciprofloxacin Response surface methodology Electrochemically activated persulfate Electrooxidation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The Pichia pastoris enzyme production platform:From combinatorial library screening to bench-top fermentation on residual cyanobacterial biomass

引用

Journal of Bioresources and Bioproducts 2024年第1期9卷 43-57页

作者： Korbinian Sinzinger Ulrike Obst Samed Güner Manuel Döring Magdalena Haslbeck Doris Schieder Volker Sieber Chair of Chemistry of Biogenic Resources Campus Straubing for Biotechnology and SustainabilityTechnical University of MunichStraubing 94315Germany Catalysis Research Center Technical University of MunichGarching 85748Germany SynBiofoundry@TUM Technical University of MunichStraubing 94315Germany School of Chemistry and Molecular Biosciences The University of QueenslandSt.Lucia 4072Australia

The demand for industrial enzymes is continually rising,fueled by the growing need to shift towards more sustainable industrial processes.However,making efficient enzyme production strains and identifying optimal enzyme expression conditions remains a challenge.Moreover,the production of the enzymes themselves comes with unavoidable impacts,e.g.,the need to utilize secondary feedstocks.Here,we take a more holistic view of bioprocess development and report an integrative approach that allows us to rapidly identify improved enzyme expression and secretion conditions and make use of cyanobacterial waste biomass as feed for supporting Pichia pastoris fermentation.We demonstrate these capabilities by producing a phytase secreted by P.pastoris that is grown on cyanobacterium hydrolysate and buffered glycerol-complex(BMGY)medium,with genetic expression conditions identified by high-throughput screening of a randomized se-cretion library.When our best-performing strain is grown in a fed-batch fermentation on BMGY,we reach over 7000 U/mL in three days.

关键词： Protein secretion Phytase Cyanobacterial biomass Fed-batch fermentation Pichia pastoris

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Challenges and opportunities in the production of magnesium parts by directed energy deposition processes

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1663-1686页

作者： Gürel ?am Ali Günen Iskenderun technical university Faculty of Engineering and Natural Sciences Department of Mechanical Engineering Iskenderun technical university Faculty of Engineering and Natural Sciences Department of Metallurgy and Materials Engineering

Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight, high specific strength,and corrosion resistance, making them attractive for applications in medical, aerospace, automotive, and other transport industries. However,their widespread application is hindered by their low formability at room temperature due to limited slip systems. Cast Mg-alloys have low mechanical properties due to the presence of casting defects such as porosity and anisotropy in addition to the high scrap. While casting methods benefit from established process optimization techniques for these problems, additive manufacturing methods are increasingly replacing casting methods in Mg alloys as they provide more precise control over the microstructure and allow specific grain orientations,potentially enabling easier optimization of anisotropy properties in certain applications.Although metal additive manufacturing(MAM) technology also results in some manufacturing defects such as inhomogeneous microstructural evolution and porosity and additively manufactured Mg alloy parts exhibit lower properties than the wrought parts, they in general exhibit superior properties than the cast counterparts. Thus, MAM is a promising technique to produce Mg alloy parts. Directed energy deposition processes, particularly wire arc directed energy deposition(WA-DED), have emerged as an advantageous additive manufacturing(AM) technique for metallic materials including magnesium alloys, offering advantages such as high deposition rates, improved material efficiency, and reduced production costs compared to subtractive processes. However, the inherent challenges associated with magnesium,such as its high reactivity and susceptibility to oxidation, pose unique hurdles in the application of this technology.This review paper delves into the progress made in the application of DED technology to Mg-alloys, its challenges, and prospects.Furthermore, the predominant imperfections, notably inhomogeneous microstructur

关键词： Additive manufacturing DED processes Arc-DED Wire arc additive manufacturing (WAAM) 3-D printing High deposition rate

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

On-Chip Micro Temperature Controllers Based on Freestanding Thermoelectric Nano Films for Low-Power Electronics

引用

Nano-Micro Letters 2024年第7期16卷 98-108页

作者： Qun Jin Tianxiao Guo Nicolas Perez Nianjun Yang Xin Jiang Kornelius Nielsch Heiko Reith Institute for Metallic Materials Leibniz Institute for Solid State and Materials Research01069 DresdenGermany Institute of Materials Engineering University of Siegen57076 SiegenGermany Institute of Applied Physics Technical University of Dresden01069 DresdenGermany Institute of Materials Science Technical University of Dresden01069 DresdenGermany

Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely challenging.Herein,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane substrate.Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are observed.Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.

关键词： Temperature control Low-power electronics On-chip micro temperature controller Freestanding thermoelectric nano films Temperature-sensitive components

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Kaoline-based catalyst for a high stability desulfurization of sour heavy naphtha in a three-phase oscillatory baffled reactor

引用

Particuology 2024年第1期84卷 249-260页

作者： Hassan M.Hmood Saba A.Gheni Safaa M.R.Ahmed Mudheher M.Ali Hamid Yonis Saleh Mohammed H.Mohammed Awad E.Mohammed Marwan A.Mahomood Hiba R.Mohammed Ahmed A.Hassan Adam Harvey North Refineries Company Ministry of OilIraq Chemical Engineering Department Tikrit UniversityIraq Ministry of Oil Iraq AL-Hawija technical Institute Northern Technical UniversityMoselIraq School of Engineering Newcastle UniversityUK

To meet the rapidly increasing demand for energy and the dramatic depletion of conventional crude oil,it is imperative to utilize sour naphtha.With no coke being produced,oxidative desulfurization(ODS)of naphtha lowers its sulfur content and average molecular weight.In this article,we outline a method for heavy naphtha non-extractive ODS using a very stable catalyst.The technique involves the use of a solid catalyst with oxygen gas as the oxidant.This necessitated relatively high mixing intensities;hence a three-phase Oscillatory Baffled Reactor(OBR)was used.The catalyst was based on the zeolite ZSM-5,prepared from natural kaolin by a series of delamination and activation steps and impregnated with Fe.A TiO2 nanolayer was applied,using the sol-gel method,to prevent rapid deactivation.The reactor performance was evaluated to minimize the sulfur content in the naphtha fuel.Due to the protective coating,the sulfur conversion stabilized at 90%.The results of this work establish the use of natural clay-based catalysts in a continuous,three-phase ODS,particularly with regard to proving long-term stability.It also showed that modest ODS can be achieved using an environmentally friendly oxidant,at mild operating conditions,whilst maintaining stability.

关键词： Natural kaoline Desulfurization Three-phase Oscillatory baffled reactor

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Electroactivity of the magnetotactic bacteria Magnetospirillum magneticum AMB-1 and Magnetospirillum gryphiswaldense MSR-1

引用

Frontiers of Environmental Science & Engineering 2024年第4期18卷 103-110页

作者： Mathias Fessler Qingxian Su Marlene Mark Jensen Yifeng Zhang Department of Environmental and Resource Engineering Technical University of DenmarkCopenhagenDK-2800Denmark

Magnetotactic bacteria reside in sediments and stratified water columns.They are named after their ability to synthesize internal magnetic particles that allow them to align and swim along the Earth’s magnetic field lines.Here,we show that two magnetotactic species,Magnetospirillum magneticum strain AMB-1 and Magnetospirillum gryphiswaldense strain MSR-1,are electroactive.Both M.magneticum and M.gryphiswaldense were able to generate current in microbial fuel cells with maximum power densities of 27 and 11μW/m^(2),respectively.In the presence of the electron shuttle resazurin both species were able to reduce the crystalline iron oxide hematite(Fe_(2)O_(3)).In addition,M.magneticum could reduce poorly crystalline iron oxide(FeOOH).Our study adds M.magneticum and M.gryphiswaldense to the growing list of known electroactive bacteria,and implies that electroactivity might be common for bacteria within the Magnetospirillum genus.

关键词： Magnetotactic bacteria Magnetospirillum magneticum Magnetospirillum gryphiswaldense Extracellular electron transfer Microbial fuel cells

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：