检索结果-南通市图书馆

Effect of AlN intermediate layer on growing GaN film by hydride vapor phase epitaxy

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2006年第z2期25卷 15-19页

作者： NOUet Gérard2 RUTERANA Pierre laboratoire structures des interfaces et fonctionnalité des couches minces UMR CNRS 6176 ENSICAEN6 Boulevard du Maréchal Juin 14050 Caen Cedex France

Thick GaN layer deposited by hydride vapor phase epitaxy (HVPE) on a metalorganic chemical vapor deposition (MOCVD) GaN template with a thin low temperature (LT) AlN intermediate layer was investigated. High resolution X-ray resolution diffraction (HRXRD) shows that the crystalline quality of thick GaN layer was improved compared with the template. As confirmed by atomic force microscopy (AFM) observations, the surface morphology of AlN intermediate layer helps to improve the nucleation of GaN epilayer. Photoluminescence (PL) spectra measurement shows its high optical quality and low compressive stress, and micro Raman measurement confirms the latter result. Thus, the deposition of the LT-AlN interlayer has promoted the growth of an HVPE-GaN layer with an excellent crystalline quality.

关键词： GaN AlN intermediate layer HVPE HRXRD AFM photoluminescence

Growth of high-quality thick GaN using a tungsten interlayer

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2006年第z2期25卷 11-14页

作者： NOUet Gérard RUTERANA Pierre laboratoire structures des interfaces et fonctionnalité des couches minces UMR CNRS 6176 ENSICAEN 6 Boulevard du Maréchal Juin 14050 Caen Cedex France

A high-quality GaN film was (W-GaN) grown by hydride vapor phase epitaxy (HVPE) on metalorganic chemical vapor deposition (MOCVD) GaN templates with a tungsten (W) interlayer. A sample without interlayer was also grown at the same time for comparison. Significant reductions of dislocation density in W-GaN film is confirmed by the result of high-resolution X-ray diffraction and transmission electron microscope (TEM) observation. The improvement of optical properties of the W-GaN is confirmed by photoluminescence (PL) result. A shift of PL peak suggests that the strain is lower in the W-GaN than the film without W interlayer. This technique offers a potential path to obtain high-quality GaN film as free-standing substrate.

关键词： GaN tungsten interlayer HVPE HRXRD

Life Cycle Assessment of Cashew Nutshell Briquettes Produced in Côte d’Ivoire

在线全文

学校读者我要写书评

暂无评论

Open Journal of Applied Sciences 2024年第9期14卷 2411-2430页

作者： Bi Tra Désiré Zinla Ekoun Paul Magloire Koffi Kamenan Blaise Koua Kpeusseu Angeline Kouambla Epse Yeo Prosper Gbaha laboratoire des Procds Industriels de Synthse de lEnvironnement et des Energies Nouvelles Institut National Polytechnique Felix Houphout-Boigny Yamoussoukro Cte dIvoire laboratoire des Sciences de la Matire de lEnvironnement et de lEnergie Solaire Unit de Formation et de Recherche des Sciences des Structures de la Matire et de Technologie Universit Felix Houphout-Boigny Abidjan Cte dIvoire

Now one of the main cash crops in Côte d’Ivoire, the cashew tree feeds an entire industrial sector based on the processing of its fruit. This processing generates a large volume of waste, consisting of cashew nutshells, the management of which poses environmental problems. With the aim of replacing charcoal and firewood with more environmentally friendly fuels, several studies are currently being carried out into the optimal use of cashew shells in fuel briquettes. To assess the environmental sustainability of these briquettes, this study calculates the environmental impacts associated with their life cycle, compares them with those of charcoal and firewood, and identifies the processes that contribute most to environmental pollution, with a view to improving them. Analysis of the results showed that cashew nutshell briquettes emit a range of pollutants over their life cycle that damage the environment and are responsible for the 7 impact categories considered: acidification, eutrophication, freshwater aquatic ecotoxicity, global warming, human toxicity, photochemical oxidation and terrestrial ecotoxicity potential. However, they are more environmentally friendly than charcoal and firewood for 5 impact categories: freshwater aquatic ecotoxicity, global warming, human toxicity, photochemical oxidation and terrestrial ecotoxicity potential. The 3 elementary processes, i.e. transport of biomass raw materials, production, and combustion of briquettes, emit pollutants that contribute most to the creation of environmental impact categories. The most relevant pollutants are nitrogen oxides (NOx), sulphur oxides (SOx) and particulate matter (PM).

关键词： LCA Briquettes Cashew Nutshell Biomass Environmental Impact

Study of the Optimal Conditions for Anaerobic Digestion of Cow Dung in Households in Cote d’Ivoire

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Open Journal of Applied Sciences 2024年第9期14卷 2679-2696页

作者： Sahi Louh Theophile Roch Ori Kamenan Blaise Koua Prosper Gbaha laboratoire de Technologie Unit de Formation et Recherche Sciences des Structures de la Matire et de Technologie (UFR SSMT) Universit Flix Houphout Boigny Abidjan Cte dIvoire laboratoire des Sciences de la Matire de lEnvironnement et de lEnergie Solaire Unit de Formation et Recherche Sciences des Structures de la Matire et de Technologie (UFR SSMT) Universit Flix Houphout Boigny Abidjan Cte dIvoire laboratoire des Procds Industriels de Synthse de lEnvironnement et des Energies Nouvelles Institut National Polytechnique Flix Houphout Boigny Yamoussoukro Cte dIvoire

This paper investigates the optimal conditions for methanisation applied to cow dung. Four experimental 25 liters digesters were used in this work. The best biogas yield is obtained when the digester is installed in a metal box and exposed to sunlight. The temperature in this digester varied between 25˚C and 37˚C. The dry matter content of the collected cow dung was 15.5%. The digester was fed with 9 kg of cow dung mixed with 8.5 litres of water, one litre of cassava effluent and 200 ml of human urine. After a retention period of 22 days, the biogas obtained was 67% methane and 21% carbon dioxide. The use of human urine and cassava effluent improved the quality of the biogas.

关键词： Methanisation Cassava Effluent Human Urine Cow Dung Biogas

Properties of n-type SnO_2 semiconductor prepared by spray ultrasonic technique for photovoltaic applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Semiconductors 2015年第12期36卷 34-37页

作者： H.Bendjedidi A.Attaf H.Saidi M.S.Aida S.Semmari A.Bouhdjar Y.Benkhetta laboratoire de Physique des couches minces et Applications Université de Biskra laboratoire des couches minces et interfaces Université Mentouri

Transparent conducting n-type SnO2 semiconductor films were fabricated by employing an inexpensive, simplified spray ultrasonic technique using an ultrasonic generator at deferent substrate temperatures （300, 350, 400, 450 and 500 ℃）. The structural studies reveal that the SnO2 films are polycrystalline at 350,400, 450, 500 ℃ with preferential orientation along the （200） and （101） planes, and amorphous at 300 ℃. The crystallite size of the films was found to be in the range of 20.9-72.2 nm. The optical transmittance in the visible range and the optical band gap are 80% and 3.9 eV respectively. The films thicknesses were varied between 466 and 1840 nm. The resistivity was found between 1.6 and 4 × 10^-2 Ω.cm. This simplified ultrasonic spray technique may be considered as a promising alternative to a conventional spray for the massive production of economic SnO2 films for solar cells, sensors and opto-electronic applications.

关键词： tin oxide thin films spray ultrasonic structural properties optical properties

Structural Pattern Related to Gold Mineralization in the Essakane Area (Northern Burkina Faso, West African Craton)

在线全文

学校读者我要写书评

暂无评论

Open Journal of Geology 2024年第9期14卷 855-879页

作者： Marc desire Valea Benjamin Sawadogo Kalidou Traoré Urbain Wenmenga Naba Seta Benjamin Allou laboratoire Gosciences et Environnement (LaGE) Dpartement des Sciences de la Terre Universit Joseph Ki-Zerbo Ouagadougou Burkina Faso Essakane Sarl IAMGOLD Corporation Ouagadougou Burkina Faso laboratoire de Godynamique et de Cartographie Universit des Sciences des Techniques et des Technologies de Bamako Bamako Mali

The finite deformation structures recorded in the Essakane area, located in the northeast corner of Burkina Faso, highlight three major compressive deformation phases, successively named D1, D2, and D3. The D1 event phase, trending NE-SW, is characterised by P1 folds and S1 axial plane schistosity. The D2 phase trending NW-SE is characterised by folds P2, schistosity (S2) and shear (C) planes. And the D3 phase trending NNE-SSW to N-S is characterised by P3 folds, crenulation microfolds and S3 spaced schistosity. It has also been noted that gold mineralizations are mainly hosted in quartz, carbonate, pyrite, and arsenopyrite veins. Structural interpretation indicates that these veins are organized into lenticular bodies that were formed during the first two deformation phases (D1 and D2). This suggests a strong structural control typical of orogenic gold concentrations.

关键词： Burkina Faso Essakane Shear Zone Deformation Phases Orogenic Gold

Finite-temperature ductility-brittleness and electronic structures of Al_(n)Sc(n=1,2 and 3)

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3974-3989页

作者： Xue-Qian Wang Ying Zhao Hao-Xuan Liu Shu-Chen Sun Hong-Bo Yang Jia-Min Zhong Gan-Feng Tu Song Li Yu-Dong Zhang Claude Esling Hai-Le Yan Liang Zuo Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education) School of Material Science and EngineeringNortheastern UniversityShenyang 110819China School of Metallurgy Northeastern UniversityShenyang 110819China Rare Earth Functional Materials(Xiong'an)Innovation Center Co. Ltd.Xiong'an 071700China laboratoire d'étude des Microstructures et de Mécanique des Matériaux(LEM3) Unikersitéde Lorraine57045MetzFrance

Finite-temperature ductility-brittleness and electronic structures of Al_(3)Sc,Al_(2)Sc and AlSc are studied comparatively by first-principles calculations and ab initio molecular *** show that Al_(3)Sc and Al_(2)Sc are brittle at both ground state and finite temperatures,while AlSc possesses a significantly superior *** ground state,AlSc is ductile from Pugh's and Poisson's criteria,while it is brittle in Pettifor's *** ductility of all Al_(3)Sc,Al_(2)Sc and AISc improves greatly with the elevated ***,the Cauchy pressure of AlSc undergoes a transition from negative to *** T>600 K,AlSc is unequivocally classified as ductile from all criteria *** all compounds,the Al-Al bond originated from s-p and p-p orbital hybridizations,and the Al-Sc bond dominated by p-d covalent hybridization,are the first and second strongest chemical bonds,*** explain the difference in mechanical properties,the mean bond strength(MBS)is introduced in this *** weaker Al-Al bond in AlSc,leading to a smaller MBS,could be the origin of the softer elastic stiffness and superior intrinsic *** longer length of the Al-Al bond in AlSc is responsible for its weaker bond ***,the enhanced metallicity of the Al-Al bond in AlSc would also contribute to its exceptional *** longer length of the Al-Al bond in AISc is responsible for its weaker bond ***,the enhanced metallicity of the Al-Al bond in AlSc would also contribute to its exceptional ductility.

关键词： Al-Sc Target materials Intrinsic ductility Finite-temperature elastic constant First-principles calculation

Experimental Investigation of the Stability of the Performance Characteristics of a Photovoltaic Module in the Face of Environmental and Meteorological Factors

在线全文

学校读者我要写书评

暂无评论

Open Journal of Applied Sciences 2024年第2期14卷 589-608页

作者： Adingra Paul Arsène Kouassi Siaka Touré Diakaridja Traoré laboratoire des Sciences de la Matière de l’Environnement et de l’Energie Solaire (LASMES) Unité de Formation et de Recherche des Sciences des Structures de la Matière et Technologie (UFR-SSMT) Université Félix Houphou&#235t Boigny Abidjan C&#244te d’Ivoire

The explosive technological improvement of photovoltaic systems as well as the necessity of populations to come to less expensive energy sources, that have led to an implosion at the level of solar panel manufacturers. This causes a large flow of these equipments to developing countries where the need is high, without any quality control. That conducted an experimental investigation on the performance characteristics of a 250 wp monocrystalline silicon photovoltaic module in other to check the verification and quality control. Most of these PV panels which often have missing informations are manufactured and tested in places that are inadequate for our environmental and meteorological conditions. Also, their influences on the stability of internal parameters were evaluated in order to optimize their performance. The results obtained at maximum illumination (1000 w/m2) confirmed those produced by the manufacturer. The analysis of these characteristics showed that the illumination and the temperature (meteorological factors) influenced at most the stability of the internal characteristics of the module in the sense that the maximum power increased very rapidly beyond 750 w/m2 but a degradation of performance was accentuated for a temperature of the solar cells exceeding 50°C. The degradation coefficients were evaluated at -0.0864 V/°C for the voltage and at -1.6248 w/°C for the power. The 10° inclination angle of the solar panel proved to be ideal for optimizing overall efficiency in practical situations.

关键词： Renewables Energies Instruments Internal Parameters of Photovoltaic Panel Monocrystalline Photovoltaic Panel Solar Energy Production Energy Intermittence

Manipulation of magnetocaloric and elastocaloric effects in Ni-Mn-In alloys by lattice volume and magnetic variation:Effect of Co and Fe co-doping

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第5期172卷 156-165页

作者： Xinzeng Liang Chi Zhang Jing Bai Jianglong Gu Yudong Zhang Claude Esling Xiang Zhao Liang Zuo School of Materials Science and Engineering Shenyang University of TechnologyShenyang 110870China Key Laboratory for Anisotropy and Texture of Materials Northeastern UniversityShenyang 110819China School of Resources and Materials Northeastern University at QinhuangdaoQinhuangdao 066004China State Key Laboratory of Metastable Materials Science and Technology Yanshan UniversityQinhuangdao 066004China laboratoire d’Étude des Microstructures et de Mécanique des Matériaux LEM3 CNRSUMR 7239University of Lorraine57045 MetzFrance

The effects of Co and Fe co-doping Ni-Mn-In alloy on the phase stability,lattice parameters,mag-netic properties,and electronic structures are systematically investigated by using the first-principles *** indicate that Fe atoms replace the excess Mn2 atoms by direct and indirect coex-istence(Fe→Mn 2 and Fe→In→Mn2);Co substitutes the Ni atoms by direct substitution(Co→Ni)for the Ni-Mn-In *** austenites all exhibit the ferromagnetic(FM)state for the studied *** NM martensites are in the ferrimagnetic(FIM-1)state for the Ni_(2)Mn_(1.5)In_(0.5),Ni_(2)Mn_(1.25)In_(0.5)Fe 0.25,Ni_(1.75)Mn_(1.5)In_(0.5)Co_(0.25),and Ni_(1.75)Mn_(1.25)In_(0.5)Co_(0.25)Fe 0.25 alloys,while the other compositions are in the FM *** phase stability of austenite and martensite decreases with increasing Co and Fe co-doping.A magnetic-structural coupling transition occurs at xetic *** Co and Fe are co-doped,the hybridization strength between Co and Fe is greater than that between Co/Fe and *** enhancement of magnetocaloric and elastocaloric effects is favored by larger magnetization difference(△M)and lattice volume change(△V/V_(0)).Based on the calculated phase stability,magneto-structure coupling,△V/V 0 and c/a ratio,one can predict that the Ni_(2)-x Mn_(1.5)-y In_(0.5)Co x Fe y alloy with Co content 0≤x≤0.25 and Fe content 0≤y≤0.05 is predicted to have good magneto-controlled functional behavior.

关键词： Ni-Mn-In-Co-Fe Phase stability Magnetocaloric effect Elastocaloric effect