检索结果-南通市图书馆

Weatherability and heat resistance enhanced by interaction between AG25 and Mg/AI-LDH

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第6期43卷 2758-2768页

作者： Pei-Yao Yang Xiang-Cui Liu Yu-Chao Wang Huan-Ran Zheng Jin-Xian Wang Jia-Yi Zheng Meng-Jie Liu Dan-Ni Deng Yu Bai Ying-Bi Chen Tong Zhang Zhi-Ming Liu Yong-Peng Lei State Key Laboratory of Powder Metallurgy Powder Metallurgy Research InstituteCentral South University research institute of Chemical Defense

Although inorganic pigments in common spectral tuning materials show good weatherability and heat resistance,the limited color choices,weak coloring power,poor dispersibility,and a possibility of toxicity limit their development.On the basis of organic pigments which possess a wide range of colors,high coloring power,good transparency,and high safety,herein,the modified pigment and biomimetic coating with improved weatherability,especially ultraviolet(UV) resistance(from 2 to 6 days),was achieved by intercalating acid green 25(AG25) pigment into Mg/Al-layered double hydroxides(Mg/Al-LDH).Furthermore,the heat resistance of AG25 was also significantly increased.Moreover,the spectral stability of pigments after heat treatment is superior with almost unchanged spectral profile and green reflection peak.The formation of strong N-H bonds and the S-M(Mg,Al)bonds between Mg/Al-LDH laminates and AG25 molecules contributes to the improvement.This work shows potential for biomimetic leaf materials in respect of reflective spectra stability.

关键词： Layered double hydroxide Biomimetic Acid green 25 Interaction Weatherability Heat resistance

Comprehensive prognostic and immune analysis of sterol Oacyltransferase 1 in patients with hepatocellular carcinoma

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

World Journal of Hepatology 2024年第3期16卷 439-451页

作者： Chang-Jiao Gan Yue Zheng Bin Yang Li-Min Cao development research Department National Medical Products Administration Institute of Executive DevelopmentBeijing 100071China School of Medicine Nankai University Affiliated Third Center HospitalTianjin 300070China Tianjin institute of Hepatobiliary Disease The Third Central Hospital of TianjinTianjin 300170China Department of Science and Technology Tianjin Third Central HospitalTianjin 300170China

BACKGROUND Sterol O-acyltransferase 1(SOAT1)is an important target in the diagnosis and treatment of liver cancer.However,the prognostic value of SOAT1 in patients with hepatocellular carcinoma(HCC)is still not clear.AIM To investigate the correlation of SOAT1 expression with HCC,using RNA-seq and gene expression data of The Cancer Genome Atlas(TCGA)-liver hepatocellular carcinoma(LIHC)and pan-cancer.METHODS The correlation between SOAT1 expression and HCC was analyzed.Cox hazard regression models were conducted to investigate the prognostic value of SOAT1 in HCC.Overall survival and disease-specific survival were explored based on TCGA-LIHC data.Biological processes and functional pathways mediated by SOAT1 were characterized by gene ontology(GO)analysis and the Kyoto Encyclopedia of Genes and Genomes(KEGG)analysis of differentially expressed genes.In addition,the protein-protein interaction network and co-expression analyses of SOAT1 in HCC were performed to better understand the regulatory mechanisms of SOAT1 in this malignancy.RESULTS SOAT1 and SOAT2 were highly expressed in unpaired samples,while only SOAT1 was highly expressed in paired samples.The area under the receiver operating characteristic curve of SOAT1 expression in tumor samples from LIHC patients compared with para-carcinoma tissues was 0.748,while the area under the curve of SOAT1 expression in tumor samples from LIHC patients compared with GTEx was 0.676.Patients with higher SOAT1 expression had lower survival rates.Results from GO/KEGG and gene set enrichment analyses suggested that the PI3K/AKT signaling pathway,the IL-18 signaling pathway,the calcium signaling pathway,secreted factors,the Wnt signaling pathway,the Jak/STAT signaling pathway,the MAPK family signaling pathway,and cell–cell communication were involved in such association.SOAT1 expression was positively associated with the abundance of macrophages,Th2 cells,T helper cells,CD56bright natural killer cells,and Th1 cells,and negatively linked to the abundance of Th17 cells,dendritic

关键词： Sterol O-acyltransferase 1 Hepatocellular carcinoma Prognostic Immune

Characteristics and genesis of tuffaceous shale oil lithofacies:A case study of Lucaogou Formation in Santanghu Basin

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum research 2024年第1期9卷 37-47页

作者： Dongsheng Xiao Xiong fei Xu Jilun Kang Yiting Zhang PetroChina Tuha Oilfield Company Exploration and development research institute China

Lucaogou Formation in the Santanghu Basin is a special lacustrine fine-grained sedimentary deposits rich in volcanic debris and carbonate,with abundant shale oil resources.However,understanding of shale oil characteristics and genesis remains unclear.Lithofacies,sedimentary environment,and formation mechanisms of tuffaceous shale oil are investigated based on core and thin section observations,X-ray diffraction,field emission SEM and geochemical analysis.Results show that three mixed lithofacies types are developed in Lucaogou Formation:blocky tuff,laminated tuffaceous dolomite,and laminated dolomitic tuff.These lithofacies types are characterized by high content of felsic and dolostone,widespread organic matter,and low clay content.Formation of tuffaceous shale oil sweet spots is primarily influenced by four factors:inputting of volcanic ash as a high-quality source rocks and reservoirs provides good material basis;devitrification of volcanic glass,calcitization,and dissolution are crucial for formation of reservoirs;expulsion of source rocks with high-abundance organic matter expulsion facilitates migration and accumulation of hydrocarbon in adjacent reservoirs;fracture development improves reservoir permeability to form highly productive sweet spots.By analyzing characteristics and genesis of tuffaceous shale oil,the main controlling factors of reservoir physical property and oil saturation are clarified,which is of great significance for selection of shale oil exploration zones.

关键词： shale oil Tuffaceous Formation mechanism Lucaogou formation Santanghu basin

Chemical and mechanical properties of stainless, environment-friendly, and nonflammable Mg alloys (SEN alloys): A review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 841-872页

作者： Jong Un Lee Hyun Ji Kim Sang-Cheol Jin Ye Jin Kim Young Min Kim Bong Sun You Jun Ho Bae Sung Hyuk Park Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea Department of Materials Science and metallurgical Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Missile research institute Agency for Defense DevelopmentDaejeon 34060Republic of Korea

This review article provides overall understanding of stainless,environment-friendly,and nonflammable Mg alloys(SEN alloys)recently developed at the Korea institute of Materials Science.SEN alloys are produced by adding small amounts of Ca and Y(each<1 wt%)into commercial Mg–Al based alloys,resulting in exceptional ignition and corrosion resistances and impressive mechanical properties.Their main advantages of SEN alloys are as follows.(1)A dense multi-oxide layer of SEN alloys comprising MgO,CaO,and Y_(2)O_(3) impedes the outward dispersion of Mg vapor and the inward penetration of O_(2) during oxidation,thereby enhancing the oxidation and ignition resistances.(2)The presence of Ca-and Y-based second-phase particles in SEN alloys can enhance their corrosion resistance because Ca-containing particles prevent the spread of corrosion,and the replacement of Al-containing particles with less noble ones containing Y(e.g.,Al–Mn–Y or Al–Y particles)retards corrosion.(3)The addition of minor amounts of Ca and Y renders excellent mechanical properties due to improved strengthening effects.These enhanced properties are attributed to more pronounced dynamic recrystallization and grain refining behaviors caused by the second-phase particles during extrusion.(4)Despite the presence of various types of second-phase particles,the fatigue properties of SEN9 alloys are similar to those of commercial AZ91 alloys.(5)Simultaneous introduction of Ca and Y suppresses the formation of Mg17Al12 discontinuous precipitates during aging,leading to the enhanced elongation of aged SEN alloys.(6)Adding mischmetal into the SEN9 alloy leads to a six-fold enhancement in extrudability.Consequently,the studies conducted on SEN alloys demonstrate their excellent ignition and corrosion resistances and mechanical properties,which broaden the industrial applications of Mg alloys by addressing their inherent weaknesses.

关键词： SEN magnesium alloy Corrosion resistance Ignition resistance Mechanical properties Extrudability.

Enhanced in-vitro degradation resistance and cytocompatibility of a thermomechanically processed novel Mg alloy:Insights into the role of microstructural attributes

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 700-725页

作者： Darothi Bairagi Santanu Mandal Mangal Roy Manas Paliwal Sumantra Mandal Department of metallurgical and Materials Engineering Indian Institute of TechnologyKharagpur 721302India

The role of microstructural features on in-vitro degradation and surface film development of a thermomechanically processed Mg-4Zn-0.5Ca-0.8Mn alloy has been investigated employing electrochemical studies,scanning electron microscopy and X-ray photoelectron spectroscopy.The specimen forged at 523 K temperature developed a coarse unimodal microstructure consisting of basal oriented grains,whereas the specimens forged at 623 K and 723 K temperatures exhibited bimodal microstructures containing randomly oriented fine grains and basal oriented coarse grains.The bimodal microstructures exerted higher resistance to corrosion compared to the unimodal microstructure in presence of a protective surface film.The optimum size distribution of fine and coarse grains as well as the prevalence of basal oriented grains led to the lowest anodic current density in the specimen forged at 623 K.The morphology of Ca_(2)Mg_(6)Zn_(3)precipitates governed the cathodic kinetics by controlling the anode to cathode surface area ratio.Despite the specimen forged at 723 K comprised comparatively lower fraction of precipitates than at 623 K,the mesh-like precipitate morphology increased the effective cathodic surface area,leading to enhanced localised corrosion in the former specimen.Optimal microstructural features developed at 623 K forging temperature formed a well-protective surface film with lower Mg(OH)_(2)to MgO ratio,exhibiting distinctly high polarization resistance and superior cytocompatibility in terms of cell-proliferation and cell-differentiation.

关键词： Magnesium alloy Microstructure Corrosion Electrochemical impedance spectroscopy X-ray photoelectron spectroscopy Cytotoxicity

Gas diffusion in catalyst layer of flow cell for CO_(2) electroreduction toward C_(2+) products

在线全文

学校读者我要写书评

暂无评论

Nano research 2024年第3期17卷 1101-1106页

作者： Xiqing Wang Qin Chen Yajiao Zhou Yao Tan Ye Wang Hongmei Li Yu Chen Mahmoud Sayed Ramadan A.Geioushy Nageh K.Allam Junwei Fu Yifei Sun Min Liu Hunan Joint International research Center for Carbon Dioxide Resource Utilization School of Physics and ElectronicsCentral South UniversityChangsha 410083China School of Energy and Power Engineering Beihang UniversityBeijing 100191China School of Materials Science and Engineering Zhengzhou UniversityZhengzhou 450002China central metallurgical research and development institute(CMRDI) P.O.Box 87Helwan 11421CairoEgypt Energy Materials Laboratory School of Sciences and EngineeringThe American University in CairoNew Cairo 11835Egypt research Center for Advanced Energy and Carbon Neutrality Beihang UniversityBeijing 100191China

The use of gas diffusion electrode(GDE)based flow cell can realize industrial-scale CO_(2) reduction reactions(CO_(2)RRs).Controlling local CO_(2) and CO intermediate diffusion plays a key role in CO_(2)RR toward multi-carbon(C_(2+))products.In this work,local CO_(2) and CO intermediate diffusion through the catalyst layer(CL)was investigated for improving CO_(2)RR toward C_(2+)products.The gas permeability tests and finite element simulation results indicated CL can balance the CO_(2) gas diffusion and residence time of the CO intermediate,leading to a sufficient CO concentration with a suitable CO_(2)/H_(2)O supply for high C_(2+)products.As a result,an excellent selectivity of C_(2+)products~79%at a high current density of 400 mA·cm^(-2) could be obtained on the optimal 500 nm Cu CL(Cu500).This work provides a new insight into the optimization of CO_(2)/H_(2)O supply and local CO concentration by controlling CL for C_(2+)products in CO_(2)RR flow cell.

关键词： gas diffusion electrode CO_(2)reduction Cu mass transfer C_(2)product

Preheating-assisted solid-state friction stir repair of Al-Mg-Si alloy plate at different rotational speeds

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 725-736页

作者： Hui Wang Yidi Li Ming Zhang Wei Gong Ruilin Lai Yunping Li State Key Laboratory of Powder Metallurgy Central South UniversityChangsha 410083China research institute of Light Alloy Central South UniversityChangsha 410083China

Additive friction stir deposition(AFSD)is a novel structural repair and manufacturing technology has become a research hotspot at home and abroad in the past five years.In this work,the microstructural evolution and mechanical performance of the Al-Mg-Si alloy plate repaired by the preheating-assisted AFSD process were investigated.To evaluate the tool rotation speed and substrate preheating for repair quality,the AFSD technique was used to additively repair 5 mm depth blind holes on 6061 aluminum alloy substrates.The results showed that preheat-assisted AFSD repair significantly improved joint bonding and joint strength compared to the control non-preheat substrate condition.Moreover,increasing rotation speed was also beneficial to improve the metallurgical bonding of the interface and avoid volume defects.Under preheating conditions,the UTS and elongation were positively correlated with rotation speed.Under the process parameters of preheated substrate and tool rotation speed of 1000 r/min,defect-free specimens could be obtained accompanied by tensile fracture occurring in the substrate rather than the repaired zone.The UTS and elongation reached the maximum values of 164.2MPa and 13.4%,which are equivalent to 99.4%and 140%of the heated substrate,respectively.

关键词： additive friction stir deposition structural repair tool rotation speed Al alloy

Electrochemical anodization of cast titanium alloys in oxalic acid for biomedical applications

在线全文

学校读者我要写书评

暂无评论

Frontiers of Chemical Science and Engineering 2024年第1期18卷 13-24页

作者： Engie M.Safwat Soha A.Abdel-Gawad Madiha A.Shoeib Shimaa El-Hadad Restorative and Dental Materials Department National Research CentreGiza 12622Egypt Chemistry Department Faculty of ScienceCairo UniversityGiza 12613Egypt central metallurgical research and development institute Helwan 11421Egypt

Titanium and its alloys have numerous biomedical applications thanks to the composition and morphology of their oxide film.In this study,the colorful oxide films were formed by anodizing cast Ti-6Al-4V and Ti-6Al-7Nb alloys in a 10%oxalic acid solution for 30 s at different voltages(20–80 V)of a direct current power supply.Atomic force microscopy was used as an accurate tool to measure the surface roughness of thin films on the nanometer scale.Scanning electron microscopy and X-ray diffraction were performed to analyze surface morphology and phase structure.According to the results,the produced titanium oxide layer showed high surface roughness,which increased with increasing anodizing voltage.The impact of anodizing voltages on the color and roughness of anodized layers was surveyed.The corrosion resistance of the anodized samples was studied in simulated body fluid at pH 7.4 and a temperature of 37℃ utilizing electrochemical impedance spectroscopy and the potentiodynamic polarization method.The anodized samples for both alloys at 40 V were at the optimal voltage,leading to a TiO_(2) layer formation with the best compromise between oxide thickness and corrosion resistance.Also,findings showed that TiO_(2) films produced on Ti-6Al-7Nb alloys had superior surface roughness properties compared to those of Ti-6Al-4V alloys,making them more appropriate for orthopedic applications.From the obtained data and the fruitful discussion,it was found that the utilized procedure is simple,low-cost,and repeatable.Therefore,anodization in 10%oxalic acid proved a viable alternative for the surface finishing of titanium alloys for biomedical applications.

关键词： DC anodization Ti-6Al-4V alloy Ti-6Al-7Nballoy oxidefilm corrosion

Microstructural evolution and deformation behavior of friction stir welded twin-induced plasticity steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 68-81页

作者： Ke Qiao Kuaishe Wang Jia Wang Zhengyang Hao Yating Xiang Peng Han Jun Cai Qi Yang Wen Wang School of metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials ProcessingXi’an University of Architecture and TechnologyXi’an 710055China Shanghai research institute of Materials Shanghai 200437China

The weldability of twin-induced plasticity(TWIP)steel with ultra-high strength via friction stir welding(FSW)technique was investigated,and microstructural evolution and deformation behavior of whole and micro-zones of FSW TWIP joint were studied for the first time.The results showed that the content of recrystallized grains in the stir zone(SZ)increased from 10.5%of basal material(BM)to 14.2%,and that of heat affected zone(HAZ)increased to 78.6%.The percentage of annealing twins decreased from 26.8%in BM to 11%in SZ,while increased to 35%in HAZ.Compared with the BM,the ultimate tensile strength and yield strength of the FSW joint increased to 1036 and 550 MPa,respectively,reaching 106.7%and 110.9%of BM,respectively.The elongation of the entire joint was 50.5%,which was lower than that of BM due to the nonuniform deformation during the tensile test.The engineering strain was mainly concentrated in BM and SZ and transferred to each other during the tensile test,while the engineering strain in HAZ was always the lowest.Finally,the tensile fracture occurred in the SZ.The order of ultimate tensile strength of micro-zones in the FSW joint was as follows:HAZ>BM≈SZ.The order of yield strength was as follows:HAZ>BM>SZ.

关键词： Twin-induced plasticity steel Friction stir welding Microstructure Mechanical property Deformation behavior