检索结果-南通市图书馆

Chinese Optics Letters 2024年第5期22卷 22-28页

作者：蒲正宇蒋林闫连山易安林何海军潘炜罗斌 center for Information photonics&Communications School of Information Science and TechnologySouthwest Jiaotong UniversityChengdu 611756China

For joint modulation format identification(MFI)and optical signal-to-noise ratio(OSNR)monitoring,a simple and intelligent optical communication performance monitoring method is proposed,and the feasibility is demonstrated by digital coherent optical communication *** experiment results show that for all modulation formats,including 28 GBaud polarization division multiplexing(PDM)QPSK/8-QAM/16-QAM/64-QAM,100%MFI accuracies are achieved even at OSNR values lower than the corresponding theoretical 20%forward error correction limit,as well as the high accuracies for OSNR ***,the proposed scheme has a reasonable monitoring level when chromatic dispersion and fiber nonlinear effects are varied.

关键词： coherent communication optical performance monitoring deep neural network

Multi-focus non-periodic scanning method for femtosecond lasers based on DMD and galvanometer scanners[Invited]

在线全文

学校读者我要写书评

暂无评论

Chinese Optics Letters 2024年第5期22卷 89-94页

作者：李华明王雨胡庆磊张卓宇吕晓华曾绍群 Britton Chance center for Biomedical photonics Wuhan National Laboratory for OptoelectronicsHuazhong University of Science and TechnologyWuhan 430074China MOE Key Laboratory for Biomedical photonics Collaborative Innovation Center for Biomedical EngineeringSchool of Engineering SciencesHuazhong University of Science and TechnologyWuhan 430074China

Multi-focus parallel scanning can effectively increase laser fabrication ***,the conventional approach of using a spatial light modulator(SLM)to generate multi-foci and scan this fixed number of foci with galvanometer scanners can only achieve a periodic scanning trajectory due to the low switching speed of the *** we demonstrate a multifocus non-periodic scanning method for femtosecond lasers by using,instead,a fast-switching digital micromirror device(DMD)to generate a dynamic number of *** number of effective foci is quickly switched by introducing aberration to the undesired *** this way,the intensity allocated to each focus will not be affected by the number of foci,and a uniformity of 98%with different numbers of foci is achieved without adjusting the total laser ***,we validate the effectiveness of this scanning method by demonstrating corneal flap fabrication of porcine cornea in vitro.

关键词： multi-focus non-periodic trajectory digital micromirror device aberration control corneal cutting

EventLFM:event camera integrated Fourier light field microscopy for ultrafast 3D imaging

在线全文

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第7期13卷 1401-1415页

作者： Ruipeng Guo Qianwan Yang Andrew S.Chang Guorong Hu Joseph Greene Christopher V.Gabel Sixian You Lei Tian Department of Electrical and Computer Engineering Boston UniversityBostonMA 02215USA Department of Physiology and Biophysics Boston UniversityBostonMA 02215USA. Neurophotonics center Boston UniversityBostonMA 02215USA. Research Laboratory of Electronics(RLE)in the Department of Electrical Science and Engineering Massachusetts Institute of TechnologyCambridgeMA 02139USA. Department of Biomedical Engineering Boston UniversityBostonMA 02215USA

Ultrafast 3D imaging is indispensable for visualizing complex and dynamic biological *** scanning-based techniques necessitate an inherent trade-off between acquisition speed and space-bandwidth product(SBP).Emerging single-shot 3D wide-field techniques offer a promising alternative but are bottlenecked by the synchronous readout constraints of conventional CMOS systems,thus restricting data throughput to maintain high SBP at limited frame *** address this,we introduce EventLFM,a straightforward and cost-effective system that overcomes these challenges by integrating an event camera with Fourier light field microscopy(LFM),a state-of-theart single-shot 3D wide-field imaging *** event camera operates on a novel asynchronous readout architecture,thereby bypassing the frame rate limitations inherent to conventional CMOS *** further develop a simple and robust event-driven LFM reconstruction algorithm that can reliably reconstruct 3D dynamics from the unique spatiotemporal measurements captured by *** results demonstrate that EventLFM can robustly reconstruct fast-moving and rapidly blinking 3D fluorescent samples at kHz frame ***,we highlight EventLFM’s capability for imaging of blinking neuronal signals in scattering mouse brain tissues and 3D tracking of GFP-labeled neurons in freely moving *** believe that the combined ultrafast speed and large 3D SBP offered by EventLFM may open up new possibilities across many biomedical applications.

关键词： field linking overcome

An isolated symmetrical 2T2R cell enabling high precision and high density for RRAM-based in-memory computing

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第5期67卷 287-294页

作者： Yaotian LING Zongwei WANG Yuhang YANG Lin BAO Shengyu BAO Qishen WANG Yimao CAI Ru HUANG School of Integrated Circuits Beijing Advanced Innovation Center for Integrated Circuits Peking University State Key Laboratory of Information photonics and Optical Communications Beijing University of Posts and Telecommunications

In-memory computing(IMC), leveraging emerging memories, holds significant promise in overcoming memory limitations and improving energy efficiency. However, the prevailing IMC array structure based on serially connected transistors and memory cells(1T1R/2T2R), along with the signed weight mapping scheme, can lead to asymmetrical weight sensing issues(AWS) due to electrical asymmetry within the1T1R/2T2R structure, particularly in highly scaled cells where the transistor's resistance becomes significant. In this paper, we propose and fabricate an electrically symmetric memory cell based on a physically isolated 2T2R structure for IMC. This design aims to enhance the precision and density of RRAM-based IMC arrays. The 2T2R cells are manufactured using the back-end-of-line(BEOL) process of a commercial40 nm technology platform. The feasibility of this design is verified through measured and simulated results,showcasing its capability to address the issue of AWS. Compared to conventional 2T2R cells, this design achieves a considerably smaller transistor footprint without compromising accuracy, while also improving integration density by 42.2%. These innovative memory cell advancements have the potential to further advance high-energy-efficient IMC technology.

关键词： RRAM 2T2R multi-level storage weight asymmetry in-memory computing

Spatio-temporal coupled mode theory for nonlocal metasurfaces

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第2期13卷 267-282页

作者： Adam Overvig Sander A.Mann Andrea Alù photonics Initiative Advanced Science Research CenterCity University of New YorkNew YorkNY10031USA Physics Program Graduate Center of the City University of New YorkNew YorkNY10016USA

Diffractive nonlocal metasurfaces have recently opened a broad range of exciting developments in nanophotonics research and applications,leveraging spatially extended—yet locally patterned—resonant modes to control light with new degrees of *** conventional grating responses are elegantly captured by temporal coupled mode theory,current approaches are not well equipped to capture the arbitrary spatial response observed in the nascent field of nonlocal ***,we introduce spatio-temporal coupled mode theory(STCMT),capable of elegantly capturing the key features of the resonant response of wavefront-shaping nonlocal *** framework can quantitatively guide nonlocal metasurface design while maintaining compatibility with local metasurface frameworks,making it a powerful tool to rationally design and optimize a broad class of ultrathin optical *** validate this STCMT framework against full-wave simulations of various nonlocal metasurfaces,demonstrating that this tool offers a powerful semi-analytical framework to understand and model the physics and functionality of these devices,without the need for computationally intense full-wave *** also discuss how this model may shed physical insights into nonlocal phenomena in photonics and the functionality of the resulting *** a relevant example,we showcase STCMT’s flexibility by applying it to study and rapidly prototype nonlocal metasurfaces that spatially shape thermal emission.

关键词： theory resonant spatially

Ka-band thin film lithium niobate photonic integrated optoelectronic oscillator

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

photonics Research 2024年第6期12卷 1283-1293页

作者： RUI MA ZIJUN HUANG SHENGQIAN GAO JINGYI WANG XICHEN WANG XIAN ZHANG PENG HAO X.STEVE YAO XINLUN CAI State Key Laboratory of Optoelectronic Materials and Technologies School of Electronics and Information TechnologySun Yat-sen UniversityGuangzhou 510275China photonics Information Innovation center and Hebei Provincial center for Optical Sensing College of Physics Science and TechnologyHebei UniversityBaoding 071002China NuVison photonics Inc.Las VegasNevada 89109USA

photonics integration of an optoelectronic oscillator(OEO)on a chip is attractive for fabricating low cost,compact,low power consumption,and highly reliable microwave sources,which has been demonstrated recently in silicon on insulator(SOI)and indium phosphide(InP)platforms at X-band around 8 *** we demonstrate the first integration of OEOs on the thin film lithium niobate(TFLN)platform,which has the advantages of lower Vπ,no chirp,wider frequency range,and less sensitivity to *** have successfully realized two different OEOs operating at Ka-band,with phase noises even lower than those of the X-band OEOs on SOI and InP *** is a fixed frequency OEO at 30 GHz realized by integrating a Mach–Zehnder modulator(MZM)with an add-drop microring resonator(MRR),and the other is a tunable frequency OEO at 20–35 GHz realized by integrating a phase modulator(PM)with a notch *** work marks the first step of using TFLN to fabricate integrated OEOs with high frequency,small size,low cost,wide range tunability,and potentially low phase noise.

关键词： optoelectronic modulator resonator

Anisotropy-free arrayed waveguide gratings on X-cut thin film lithium niobate platform of in-plane anisotropy

在线全文

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第7期13卷 1416-1426页

作者： Junjie Yi Changjian Guo Ziliang Ruan Gengxin Chen Haiqiang Wei Liwang Lu Shengqi Gong Xiaofu Pan Xiaowan Shen Xiaowei Guan Daoxin Dai Kangping Zhong Liu Liu State Key Laboratory of Extreme photonics and Instrumentation College of Optical Science and EngineeringInternational Research Center for Advanced PhotonicsZhejiang UniversityHangzhou 310058China. Guangdong Provincial Key Laboratory of Optical Information Materials and Technology South China Academy of Advanced OptoelectronicsSouth China Normal UniversityHigher-Education Mega-CenterGuangzhou 510006China. National center for International Research on Green Optoelectronics South China Normal UniversityGuangzhou 510006China photonics Research Institute Department of Electrical and Electronic EngineeringThe Hong Kong Polytechnic UniversityHung HomKowloonHong Kong(SAR)China. Jiaxing Key Laboratory of Photonic Sensing&Intelligent Imaging Intelligent Optics&Photonics Research CenterJiaxing Research Institute Zhejiang UniversityJiaxing 314000China

Arrayed waveguide grating is a versatile and scalable integrated light dispersion device,which has been widely adopted in various applications,including,optical communications and optical ***,thin-film lithium niobate emerges as a promising photonic integration platform,due to its ability of shrinking largely the size of typical lithium niobate based optical *** would also enable multifunctional photonic integrated chips on a single lithium niobate ***,due to the intrinsic anisotropy of the material,to build an arrayed waveguide grating on X-cut thin-film lithium niobate has never been ***,a universal strategy to design anisotropyfree dispersive components on a uniaxial in-plane anisotropic photonic integration platform is introduced for the first *** leads to the first implementation of arrayed waveguide gratings on X-cut thin-film lithium niobate with various configurations and *** best insertion loss of 2.4 dB and crosstalk of−24.1 dB is obtained for the fabricated arrayed waveguide grating *** of such arrayed waveguide gratings as a wavelength router and in a wavelength-division multiplexed optical transmission system are also demonstrated.

关键词： waveguide arrayed lithium

Robust thin-film lithium niobate modulator on a silicon substrate with backside holes

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Optics Letters 2024年第5期22卷 17-21页

作者：王迈祁璐王浩华阮子良陈耿鑫陈斌龚胜琪陈楷旋刘柳 State Key Laboratory of Extreme photonics and Instrumentation College of Optical Science and EngineeringInternational Research Center for Advanced PhotonicsZhejiang UniversityHangzhou 310058China Guangdong Provincial Key Laboratory of Optical Information Materials and Technology South China Academy of Advanced OptoelectronicsSouth China Normal UniversityHigher-Education Mega-CenterGuangzhou 510006China National center for International Research on Green Optoelectronics South China Normal UniversityGuangzhou 510006China Jiaxing Key Laboratory of Photonic Sensing&Intelligent Imaging Intelligent Optics&Photonics Research CenterJiaxing Research InstituteZhejiang UniversityJiaxing 314000China

Recently,Mach–Zehnder modulators based on thin-film lithium niobate have attracted broad interest for their potential for high modulation bandwidth,low insertion loss,high extinction ratio,and high modulation *** periodic capacitively loaded traveling-wave electrode is optimally adopted for ultimate high-performances in this type of ***,such an electrode structure on a silicon substrate still suffers from the velocity mismatch and substrate leakage loss for microwave ***,we introduce a thin-film lithium niobate modulator structure using this periodic capacitively loaded electrode on a silicon *** holes in the silicon substrate are prepared to solve robustly the above *** fabricated device exhibits an insertion loss of 0.9 dB,a halfwave-voltage–length product of 2.18 V·cm,and an ultra-wide bandwidth well exceeding 67 GHz for a 10-mm-long *** transmissions with rates up to 112 Gb/s are *** proposed structure and fabrication strategy are compatible for other types of monolithic and heterogeneous integrated thin-film lithium niobate modulators on a silicon substrate.

关键词： lithium niobate electro-optic modulator high bandwidth backside holes robust structure

Investigation and mitigation of Mott neuronal oscillation fluctuation in spiking neural network

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第2期67卷 291-301页

作者： Lindong WU Zongwei WANG Lin BAO Linbo SHAN Zhizhen YU Yunfan YANG Shuangjie ZHANG Guandong BAI Cuimei WANG John ROBERTSON Yuan WANG Yimao CAI Ru HUANG School of Integrated Circuits Peking University Beijing Advanced Innovation center for Integrated Circuits State Key Laboratory of Information photonics and Optical Communications Beijing University of Posts and Telecommunications Department of Engineering University of Cambridge

Mott devices, featuring low hardware cost and high energy efficiency, have been demonstrated as a key oscillatory element in artificial neurons to enable spiking neural networks(SNNs) such as conversionbased SNNs(CSNNs). However, there will be inevitably non-ideal fluctuation in the oscillation behavior,causing the accuracy degradation of networks. In this paper, we investigate the Mott neuronal oscillation fluctuation(NOF) through experiments and modeling. The results show that the NOF phenomenon conforms to Gaussian distribution and originates from thermal fluctuation induced switching voltage variations. We construct a two-layer CSNN for image recognition tasks to study the NOF effect and propose the activation function boundary(AFB) method to strengthen the stability of the network. The results indicate that AFB can improve the accuracy of CSNN by up to 15.5% by tightening output distribution.

关键词： Mott neuron oscillation fluctuation variation-aware Mott neuronal model conversion-based spiking neural network activation function boundary

Line-scanning microscopy with laterally symmetric imaging using simultaneous cross-line illumination

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

photonics Research 2024年第7期12卷 1513-1521页

作者： DAN SHEN YAFENG LI MENG WANG YUTONG HAN BOLIN LU HUI GONG QINGMING LUO JING YUAN Britton Chance center for Biomedical photonics and MoE Key Laboratory for Biomedical photonics Wuhan National Laboratory for OptoelectronicsHuazhong University of Science and TechnologyWuhan 430074China HUST-Suzhou Institute for Brainsmatics JITRI Institute for BrainsmaticsSuzhou 215123China School of Biomedical Engineering Hainan UniversityHaikou 570228China

Using an on-the-fly scanning scheme, line confocal microscopy can obtain complex structures of large biological tissues with high throughput. Yet, it suffers from lateral imaging asymmetry and thus introduces the potential deformations of the observation results. Here, we propose cross-line illumination microscopy (cLIM) that acquires the imaging data of two perpendicular directions simultaneously through the same objective lens in a line scanning and utilizes two-direction deconvolution fusion to achieve lateral symmetric imaging *** fluorescence beads indicates that cLIM reduces lateral resolution asymmetry from 46.1%to 2.5%and improves lateral resolution by 31.0%, compared with traditional line-scanning imaging. Compared with commercial point-confocal microscopy, the cLIM has a 25.84×increase in imaging speed and 1.93×better background-suppressing ability when imaging an 11,306μm×7783μm×100μm mouse kidney slice. We also show the advantages of the cLIM in observing direction-sensitive texture features by imaging a muscular tissue slice. cLIM offers a novel solution to achieve laterally symmetric line-scanning imaging with simple modifications while maintaining high throughput and accuracy for imaging large-scale samples.

关键词： illumination simultaneous scanning