检索结果-南通市图书馆

Morphology and electrical contact properties of electrical connection materials in corrosive atmosphere

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2013年第2期32卷 174-178页

作者： zhi-gang kong Liang-Jun Xu Research Laboratory of Electrical Contacts Beijing University of Posts and Telecommunications

The impact mechanism of environmental fac tors, such as corrosive atmosphere, on connector materials was investigated, and the porosity of gold plating was tested. Series of inspections and analytical research meth ods were introduced in this article. The surface morphology of specimens after corrosion was observed by stereoscopic microscope and scanning electron microscope. Chemical constitution was examined by Xray energy spectrum. The contact resistances were measured by fourpoint method. The experiment results show that after exposure to certain environment, the corrosion products, such as Cu20, Cu（NO3）2.3H20, and NiO, are observed on the surface of the specimens without gold coatings, whereas the corrosion products appear to have circleshaped spots on goldplating surface after corrosion test, which indicate that the gold plating has good corrosion protection. The porosity is increased with the increase of corrosion time for every kind of specimens gold plated, and the corrosion degree of gold plating specimens is decreased with the increase of the thickness of gold coatings. The static contact resistances of circleshaped spots appear higher contact resistance than normal value, which can reach to 2,000 mr2 nearly. It is found that the high and unstable contact resistance of the pore and products is more likely to cause contact failure.

关键词： Electrical contact Porosity Corrosion Temperature

DESIGN AND SIMULATION OF RIGIDLY MOUNTED ACOUSTIC VECTOR SENSOR

在线全文

学校读者我要写书评

暂无评论

DESIGN AND SIMULATION OF RIGIDLY MOUNTED ACOUSTIC VECTOR SEN...

A low redox potential and long life organic anode material for sodium-ion batteries

2015全国压电和声波理论及器件技术研讨会

作者： Hao ZHANG Liang-jun XU zhi-gang kong Automation School Beijing University of Posts and Telecommunications

According to the inconvenience of underwater co-oscillating acoustic vector sensor’s suspension systems which consist of elastic elements and rigid support structure around the vector sensor,a rigidly mounted acoustic vector sensor for measuring pressure gradient is introduced in this *** basic structure of the rigidly mounted acoustic vector sensor consists of two primary components:disk-shape piezoelectric sensing element and cylinder part fixed with the sensing *** the cylinder part is stimulated by sound wave,the piezoelectric sensing element transforms the resultant strain into a voltage output *** finite element model of the acoustic vector sensor was established by ANSYS,and the influence of geometric and material parameters on the characteristics of the acoustic vector sensor was analyzed based on its finite element model.

关键词： Vector sensor Rigidly mounted Piezoelectric Pressure gradient

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 557-564页

作者： zhi Li Yang Wei Kang Zhou Xin Huang Xing Zhou Jie Xu Taoyi kong Junwei Lucas Bao Xiaoli Dong Yonggang Wang Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Institute of New Energy Collaborative Innovation Center of Chemistry for Energy Materials (iChEM) Fudan University Department of Chemistry Boston College School of Materials Science and Engineering Anhui University of Technology

Sodium-ion batteries （SIBs） with organic electrodes are an emerging research direction due to the sustainability of organic materials based on elements like C,H,O,and sodium ***,organic electrode materials for SIBs are mainly used as cathodes because of their relatively high redox potentials（>1 V）.Organic electrodes with low redox potential that can be used as anode are ***,a novel organic anode material （tetrasodium 1,4,5,8-naphthalenetetracarboxylate,Na4TDC） has been developed with low redox potential （<0.7 V） and excellent cyclic *** three-sodium storage mechanism was demonstrated with various in-situ/ex-situ spectroscopy and theoretical calculations,showing a high capacity of 208 mAh/g and an average decay rate of merely 0.022%per ***,the Na4TDC-hard carbon composite can further acquire improved capacity and cycling stability for 1200 cycles even with a high mass loading of up to 20 mg *** pairing with a thick Na3V2（PO4）3cathode (20.6 mg cm-2),the as-fabricated full cell exhibited high operating voltage （2.8 V）,excellent rate performance and cycling stability with a high capacity retention of 88.7% after 200 cycles,well highlighting the Na4TDC anode material for SIBs.

关键词： Organic anode material Low redox potential Composite anode Sodium-ion batteries

Micro-strain regulation strategy to stabilize perovskite lattice based on the categories and impact of strain on perovskite solar cells

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 578-604页

作者： Caixia Li Wenwu Liu Shiji Da Lingbin kong Fen Ran State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals Lanzhou University of Technology School of Materials Science and Engineering Lanzhou University of Technology

Photovoltaic metal halide perovskite solar cells(PSCs) convert light to electricity more efficiently than crystalline silicon cells, and the cost of materials used to make them is lower than that of silicon *** efficiency is not a core issue affecting the application of perovskite solar cells in special *** present, stability is the major technical encounters that hinders its further commercial development. Microstrain in PSCs is currently a significant factor responsible for the device's instability. Strain-induced ion migration is widely believed to accelerate perovskite degradation even when external stimuli are ***, it is imperative to study strain to enhance the stability of PSCs. This paper reviews recent developments to understand strain's origin and effect mechanisms on performance of PSCs, including ion migration,failure behavior, defect formation, and its effect on photoelectric properties, stability, and ***, several well-known strain management strategies are systematically introduced based on the strain effect mechanism and strain engineering on the film, providing more clues for further preparation with increased stability. The manipulation of external physical strain applied from films to entire devices has been extensively studied. Furthermore, recommendations for future research directions and chemical approaches have been provided. It is emphasized that strain engineering plays a crucial role in improving the efficiency and longevity of PSCs. Tensile strain causes rapid degradation, while moderate compressive strain and external strain control could improve properties and stability. Efforts should focus on controlling compressive strain to mitigate residual tensile strain and introducing it in a controlled manner. Future research endeavors may focus on exploring these pathways to improve the efficiency and lifespan of PSCs.

关键词： Halide perovskite solar cells Strain origins Strain effects Strain management

Dynamic Interaction Analysis of Coupled Axial-Torsional-Lateral Mechanical Vibrations in Rotary Drilling Systems

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Structural Durability & Health Monitoring 2025年第1期19卷 77-103页

作者： Sabrina Meddah Sid Ahmed Tadjer Abdelhakim Idir kong Fah Tee Mohamed Zinelabidine Doghmane Madjid Kidouche Applied Automation Laboratory Faculty of Hydrocarbons and ChemistryUniversity of BoumerdesBoumerdes35000Algeria Institute of Electrical and Electronic Engineering(IGEE) University of BoumerdesBoumerdes35000Algeria Laboratory of the Electrification of Industrial Enterprises University of BoumerdesBoumerdes35000Algeria Electrical Engineering Department Mohamed Boudiaf University of M’silaM’sila28000Algeria Department of Civil and Environmental Engineering King Fahd University of Petroleum&MineralsDhahran31261Saudi Arabia Interdisciplinary Research Center for Construction and Building Materials King Fahd University of Petroleum&Minerals(KFUPM)Dhahran31261Saudi Arabia

Maintaining the integrity and longevity of structures is essential in many industries,such as aerospace,nuclear,and *** achieve the cost-effectiveness of large-scale systems in petroleum drilling,a strong emphasis on structural durability and monitoring is *** study focuses on the mechanical vibrations that occur in rotary drilling systems,which have a substantial impact on the structural integrity of drilling *** study speciﬁcally investigates axial,torsional,and lateral vibrations,which might lead to negative consequences such as bit-bounce,chaotic whirling,and high-frequency *** events not only hinder the efﬁciency of drilling but also lead to exhaustion and harm to the system’s components since they are difﬁcult to be detected and controlled in real *** study investigates the dynamic interactions of these vibrations,speciﬁcally in their high-frequency modes,usingﬁeld data obtained from measurement while ***ﬁndings have demonstrated the effect of strong coupling between the high-frequency modes of these vibrations on drilling sys-tem *** obtained results highlight the importance of considering the interconnected impacts of these vibrations when designing and implementing robust control ***,integrating these compo-nents can increase the durability of drill bits and drill strings,as well as improve the ability to monitor and detect ***,by exploiting theseﬁndings,the assessment of structural resilience in rotary drilling systems can be ***,the study demonstrates the capacity of structural health monitoring to improve the quality,dependability,and efﬁciency of rotary drilling systems in the petroleum industry.

关键词： Rotary drilling systems mechanical vibrations structural durability dynamic interaction analysis ﬁeld data analysis

The School that Changes Mindsets

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Today 2025年第1期74卷 62-64页

作者： GUO QING kong SIQI 不详

China’s highest-altitude primary school is not only teaching children of farmers and herders but their parents as *** Sinopec Primary School in Nagqu,a city in Xizang Autonomous Region in southwest China,is known as the school“the closest to the sky”due to its high-altitude location-a breathtaking 4,700 meters above sea *** by oil and gas giant Sinopec as part of its corporate social responsibility,the school opened in 2012 and has since become a microcosm of China’s drive for education,especially in remote and rural areas,to ensure that no one is left behind.

关键词： altitude farmers southwest

A Study on Pollen Allergens in China

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Biomedical and Environmental Sciences 2010年第4期23卷 319-322页

作者： zhi-gang LIU JUAN-JUAN SONG XIAO-LI kong State Key Laboratory of Allergic Respiratory Diseases School of Medicine Shenzhen University Shenzhen 518060 Guangdong China

Objective Allergic disease caused by airborne pollen is a major health problem in China. Intensive study on pollen allergens can be of great help for preventing and treating pollinosis. Four aspects of the study on pollen allergens in China including major allergic pollen in our country, analysis and purification of pollen allergen composition, recombinant pollen allergens and clinical application of pollen allergens are described in this paper.

关键词： Airborne pollen Allergens Clinical application Pollinosis Recombinant allergens

Alkaline leaching mechanism of MSWI bottom ash: the pivotal role of Si(Al) chemical bonding environments

在线全文

学校读者我要写书评

暂无评论

Science China Technological Sciences 2025年

作者： Ningning SHAO Zekun JIAO Weipeng FENG Yu JIN Fanlong kong zhijun DONG Zuotai ZHANG Institute of Technology for Marine Civil Engineering Shenzhen Institute of Information Technology (SZIIT) Guizhou NASH Ecological Technology Co. LTD School of Environmental Science and Engineering Key Laboratory of Municipal Solid Waste Recycling Technology and Management of Shenzhen City Southern University of Science and Technology (SUSTech)

Municipal solid waste incineration bottom ash(MSWIBA) is a complex assemblage of aluminosilicate materials encompassing diverse solid wastes. Thus, its complexity poses great challenges to their resource utilization. For the sake of the alkali activation use of MSWIBA, this work focused on the characterizations and alkaline leaching experiments of various classified MSWIBA after sorting. Among the different categories of MSWIBA, waste glass(BA-G) and other unidentified slags(BA-O) were identified as potential precursors for alkali activation use. The alkaline leaching experiments proved that alkaline concentration, reaction temperature, reaction time, and raw material classification influenced the leaching process and results. Among these, the Si/Al chemical bonding environments from the material type played a pivotal role. When the materials had Qn(n>2) as the primary bonding structure, steric hindrance by the chain frameworks affected the alkali dissolution process, resulting in gradual disintegration from the outer layers inward. For the materials dominated by Q1frameworks, OH-could penetrate the frameworks, leading to their rapid depolymerization and outward dissolution. Overall, the Si/Al bonding environment played a crucial role in alkaline dissolution, providing theoretical guidance for classifying the alkali-activation utilization of MSWIBA and other aluminosilicate solid wastes.

关键词：

3D Printing of Tough Hydrogel Scaffolds with Functional Surface Structures for Tissue Regeneration

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 18-45页

作者： Ke Yao Gaoying Hong Ximin Yuan Weicheng kong Pengcheng Xia Yuanrong Li Yuewei Chen Nian Liu Jing He Jue Shi Zihe Hu Yanyan Zhou zhijian Xie Yong He State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China Liangzhu Laboratory Zhejiang UniversityHangzhou 310027People’s Republic of China Key Laboratory of 3D Printing Process and Equipment of Zhejiang Province College of Mechanical EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China Stomatology Hospital School of StomatologyZhejiang University School of MedicineHangzhou 310027People’s Republic of China State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin 150001People’s Republic of China Institute of Digital Medicine Nanjing First HospitalNanjing Medical UniversityNanjing 210006People’s Republic of China

Hydrogel scaffolds have numerous potential applications in the tissue engineering ***,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and high mechanical *** by Chinese ramen,we propose a universal fabricating method(printing-P,training-T,cross-linking-C,PTC&PCT)for tough hydrogel scaffolds to fill this ***,3D printing fabricates a hydrogel scaffold with desired structures(P).Then,the scaffold could have extraordinarily high mechanical properties and functional surface structure by cycle mechanical training with salting-out assistance(T).Finally,the training results are fixed by photo-cross-linking processing(C).The tough gelatin hydrogel scaffolds exhibit excellent tensile strength of 6.66 MPa(622-fold untreated)and have excellent ***,this scaffold possesses functional surface structures from nanometer to micron to millimeter,which can efficiently induce directional cell ***,this strategy can produce bionic human tissue with mechanical properties of 10 kPa-10 MPa by changing the type of salt,and many hydrogels,such as gelatin and silk,could be improved with PTC or PCT *** experiments show that this scaffold can effectively promote the new generation of muscle fibers,blood vessels,and nerves within 4 weeks,prompting the rapid regeneration of large-volume muscle loss injuries.

关键词： 3D printing Tough hydrogel scaffold Functional surface structure Tissue regeneration Biomaterials