检索结果-南通市图书馆

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 255-265页

作者： x.Y.Yue S.Y.peng x.Zhang C.N.He Y.Z.Tian Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education) School of Materials Science and EngineeringNortheastern UniversityShenyang110819China School of Materials Science and Engineering and Tianjin Key Laboratory of Composite and Functional Materials Tianjin UniversityTianjin300350China Research Centre for Metallic Wires Northeastern UniversityShenyang110819China

A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution *** hot-pressed sintered and solution treated materials were rolled and *** precipitation behavior and performance changes were systematically studied by using scanning electron microscopy and transmission electron *** contrast to the hot-pressed sintered specimen,the solution treatment significantly affects the thermal stability and properties of the Cu-10wt%Fe *** Cu-10wt%Fe composite was prepared after solid solution,cold rolling and aging at 773 K for 1 h,and it obtained excellent tensile strength of 494 MPa,uniform elongation of 16.3%,electrical conductivity of 51.1%IACS and softening temperature of 838 *** for the distinct difference in thermal stability and properties between hot-pressed sintered and solution treated specimens were *** findings provide a theoretical basis for designing high-performance Cu-based in-situ composites by post treatment.

关键词： Cu-Fe composite Hot-pressed sintering Thermal stability Strength Electrical conductivity

Layer Hall effect induced by hidden Berry curvature in antiferromagnetic insulators

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

National Science Review 2024年第2期11卷 15-23页

作者： Rui Chen Hai-peng Sun Mingqiang gu Chun-Bo Hua Qihang Liu Hai-Zhou Lu x.C.xie Shenzhen Institute for Quantum Science and Engineering and Department of Physics Southern University of Science and Technology(SUSTech) International Quantum Academy Institute for Theoretical Physics and Astrophysics University of Würzburg School of Electronic and Information Engineering Hubei University of Science and Technology guangdong Provincial Key Laboratory of Computational Science and Material Design Southern University of Science and Technology Shenzhen Key Laboratory of Quantum Science and Engineering International Center for Quantum Materials School of PhysicsPeking University Collaborative Innovation Center of Quantum Matter CAS Center for Excellence in Topological Quantum Computation University of Chinese Academy of Sciences

The layer Hall effect describes electrons spontaneously deflected to opposite sides at different layers, which has been experimentally reported in the MnBi2Te4thin films under perpendicular electric fields. Here, we reveal a universal origin of the layer Hall effect in terms of the so-called hidden Berry curvature, as well as material design principles. Hence, it gives rise to zero Berry curvature in momentum space but non-zero layer-locked hidden Berry curvature in real space. We show that, compared to that of a trivial insulator, the layer Hall effect is significantly enhanced in antiferromagnetic topological insulators. Our universal picture provides a paradigm for revealing the hidden physics as a result of the interplay between the global and local symmetries, and can be generalized in various scenarios.

关键词： layerHall effect hidden Berry curvature antiferromagnetic insulator axion insulator, quantum transport

Ka-band thin film lithium niobate photonic integrated optoelectronic oscillator

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Photonics Research 2024年第6期12卷 1283-1293页

作者： RUI MA ZIJUN HUANg SHENgQIAN gAO JINgYI WANg xICHEN WANg xIAN ZHANg peng HAO x.STEVE YAO xINLUN CAI State Key Laboratory of Optoelectronic Materials and Technologies School of Electronics and Information TechnologySun Yat-sen UniversityGuangzhou 510275China Photonics Information Innovation Center and Hebei Provincial Center for Optical Sensing College of Physics Science and TechnologyHebei UniversityBaoding 071002China NuVison Photonics Inc.Las VegasNevada 89109USA

Photonics integration of an optoelectronic oscillator(OEO)on a chip is attractive for fabricating low cost,compact,low power consumption,and highly reliable microwave sources,which has been demonstrated recently in silicon on insulator(SOI)and indium phosphide(InP)platforms at x-band around 8 *** we demonstrate the first integration of OEOs on the thin film lithium niobate(TFLN)platform,which has the advantages of lower Vπ,no chirp,wider frequency range,and less sensitivity to *** have successfully realized two different OEOs operating at Ka-band,with phase noises even lower than those of the x-band OEOs on SOI and InP *** is a fixed frequency OEO at 30 gHz realized by integrating a Mach–Zehnder modulator(MZM)with an add-drop microring resonator(MRR),and the other is a tunable frequency OEO at 20–35 gHz realized by integrating a phase modulator(PM)with a notch *** work marks the first step of using TFLN to fabricate integrated OEOs with high frequency,small size,low cost,wide range tunability,and potentially low phase noise.

关键词： optoelectronic modulator resonator

Time-Periodic Solutions to Quasilinear Hyperbolic Systems on general Networks

在线全文

学校读者我要写书评

暂无评论

Chinese Annals of Mathematics,Series B 2024年第1期45卷 41-72页

作者： peng QU School of Mathematical Sciences Fudan UniversityShanghai 200433China

For quasilinear hyperbolic systems on general networks with time-periodic boundary-interface conditions with a dissipative structure,the existence and stability of the time-periodic classical solutions are discussed.

关键词： Time-periodic solution Quasilinear hyperbolic system general net-work Classical solution Asymptotic stability

Thermal and mechanical behavior of casting copper alloy wheel during wheel and belt continuous casting process

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第1期21卷 82-90页

作者： Kun gao Yan peng School of Mechanical Engineering Yanshan UniversityQinhuangdao 066004HebeiChina

To investigate the thermal and mechanical behavior of casting wheel,a two-dimensional thermoelastic-plastic finite element model was used to predict the temperature,stress and distortion distribution of the casting wheel during the wheel and belt continuous casting *** effects of grinding thickness and casting speed on the thermal and mechanical behaviors of the center of the hot face of the casting wheel were discussed in *** each rotation,the casting wheel passes through four different spray *** results show that the temperature distribution of the casting wheel in different spray zones is similar,the temperature of the hot face is the highest and the temperature reaches the peak in the spray zoneⅢ.The stress and distortion depend on the temperature distribution,and the maximum stress and distortion of the hot face are 358.2 MPa and 1.82 mm,*** temperature at the center of the hot face decreases with increasing grinding thickness and increases with increasing casting speed.

关键词： casting wheel finite element model grinding thickness casting speed hot face spray zones

Numerical simulation of fluid flow and free surface fluctuations during wheel and belt casting process

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1117-1126页

作者： Kun gao Yan peng National Engineering Research Center for Equipment and Technology of Cold Strip Rolling Yanshan UniversityQinhuangdao066004HebeiChina

The unstable fluid flow and severe free surface fluctuations in the wheel and belt caster can affect the quality of the cast *** lower level height tends to entrap inclusions in the molten *** the other hand,the higher level height makes the production process more dangerous due to the overflow of high temperature fluid from the mold.A computational model of the molten metal pouring process was *** transient fluid flow and free surface fluctuations behavior were calculated using the three-dimensional large eddy simulation model and the volume of fluid *** results show that the flow velocity of the main jet gradually decreases under the influence of the low kinetic energy fluid in the *** is an obvious oscillation in the tail of the jet,while the flow field is asymmetric in *** jet is closer to the inside radius side due to the Coanda effect,and there is a recirculation zone on the inside radius and the outside radius respectively,according to the 10 s time-averaged *** with the industrial observation and simulation results,the shape of the free surface is a wave that varies with *** addition,the free surface height is lowest and the flow velocity is highest in the region near the jet.

关键词： Fluid flow Free surface Wheel and belt caster Large eddy simulation Volume of fluid method

Two-Stage Online Debiased Lasso Estimation and Inference for High-Dimensional Quantile Regression with Streaming Data

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Systems Science & Complexity 2024年第3期37卷 1251-1270页

作者： peng Yanjin WANg Lei School of Statistics and Data Science KLMDASRLEBPS and LPMCNankai UniversityTianjin 300071China

In this paper,the authors propose a two-stage online debiased lasso estimation and statistical inference method for high-dimensional quantile regression(QR)models in the presence of streaming *** the first stage,the authors modify the QR score function based on kernel smoothing and obtain the online lasso smoothed QR estimator through iterative *** estimation process only involves the current data batch and specific historical summary statistics,which perfectly accommodates to the special structure of streaming *** the second stage,an online debiasing procedure is carried out to eliminate biases caused by the lasso penalty as well as the accumulative approximation error so that the asymptotic normality of the resulting estimator can be *** authors conduct extensive numerical experiments to evaluate the performance of the proposed *** experiments demonstrate the effectiveness of the proposed method and support the theoretical *** application to the Beijing PM2.5 Dataset is also presented.

关键词： Adaptive tuning asymptotic normality debiased lasso online updating quantile regres-sion

Electronic origin of structural degradation in Li-rich transition metal oxides:The case of Li_(2)MnO_(3)and Li_(2)RuO_(3)

在线全文

学校读者我要写书评

暂无评论

Journal of Semiconductors 2024年第4期45卷 82-86页

作者： peng Zhang Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and guangdong Province College of Physics andOp toelec-tronic EngineeringShenzhen UniversityShenzhen 518060China

Li_(2)MnO_(3)and Li_(2)RuO_(3)represent two prototype Li-rich transition metal(TM)oxides as high-capacity cathodes for Li-ion batteries,which have similar crystal structures but show quite different cycling ***,based on the first-princi-ples calculations,we systematically studied the electronic structures and defect properties of these two Li-rich cathodes,in order to get more understanding on the structural degradation mechanism in Li-rich TM *** calculations indicated that the structural and cycling stability of Li_(2)MnO_(3)and Li_(2)RuO_(3)depend closely on their electronic structures,especially the energy of their highest occupied electronic states(HOS),as it largely determines the defect properties of these *** Li_(2)MnO_(3)with low-energy HOS,we found that,due to the defect charge transfer mechanism,various defects can form spontaneously in its host structure as Li ions are extracted upon delithiation,which seriously deteriorates its structural and cycling *** for Li_(2)RuO_(3),on the other hand,we identified that the high-energy HOS prevents it from the defect formation upon delithi-ation and thus preserve its cycling *** studies thus illustrated an electronic origin of the structural degradation in Li-rich TM oxides and implied that it is possible to improve their cycling performances by carefully adjusting their TM compo-nents.

关键词： defects Li-ion batteries first-principles calculations

Fourth-order phase-field modeling for brittle fracture in piezoelectric materials

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 837-856页

作者： Yu TAN Fan peng Chang LIU Daiming peng x.a.gyu LI State Key Laboratory of geohazard Prevention and geoenvironment Protection Chengdu University of TechnologyChengdu 610059China College of Science Chang'an UniversityXi'an 710064China Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province School of Mechanics and Aerospace EngineeringSouthwest Jiaotong UniversityChengdu 610031China

Failure analyses of piezoelectric structures and devices are of engineering and scientific *** this paper,a fourth-order phase-field fracture model for piezoelectric solids is developed based on the Hamilton *** typical electric boundary conditions are involved in the present model to characterize the fracture behaviors in various physical situations.A staggered algorithm is used to simulate the crack *** polynomial splines over hierarchical T-meshes(PHT-splines)are adopted as the basis function,which owns the *** numerical simulations are performed to study the influence of the electric boundary conditions and the applied electric field on the fracture behaviors of piezoelectric *** electric boundary conditions may influence crack paths and fracture loads *** present research may be helpful for the reliability evaluation of the piezoelectric structure in the future applications.

关键词： isogeometric analysis(IgA) brittle fracture fourth-order phase-field model piezoelectric solid

A Weighted Flow related to a Trudinger–Moser Functional on Closed Riemann Surface

在线全文

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第9期40卷 2244-2262页

作者： peng xiu YU School of Mathematics Renmin University of ChinaBeijing 100872P.R.China

In this paper,with(Σ,g)being a closed Riemann surface,we analyze the possible concentration behavior of a heat flow related to the Trudinger–Moser *** obtain a long time existence for the *** along some sequence of times t_(k)→+∞,we can deduce the convergence of the flow in H2(Σ).Furthermore,the limit function is a critical point of the Trudinger–Moser functional under certain constraint.

关键词： Trudinger-Moser inequality global convergence heat flow