检索结果-南通市图书馆

Tensile deformation of fine-grained mg at 4K,78K and 298K

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第6期12卷 2534-2556页

作者： m.Walag A.Kula p.Noga T.Tokarski G.Cios m.Niewczas AGH University of Krakow Faculty of Non-Ferrous MetalsKrakowPoland AGH University of Krakow Academic Centre for Materials and NanotechnologyKrakowPoland materials Science and Engineering McMaster UniversityHamiltonCanada

The impact of grain size, ranging from 0.9 μm to 9 μm, on the mechanical properties of commercially pure mg is investigated at temperatures of 4K, 78K, and 298K. The mechanisms governing plastic flow are influenced by both grain size and temperature. At 4K and 78K, dominant deformation modes in mg involve dislocation glide and extension twinning, regardless of grain size. The interactions between basal and non-basal dislocations and dislocations with grain boundaries promote an unusually high rate of work hardening in the plastic regime, leading to premature failure. The yield stress follows the Hall-petch relationship σy~ k/√d, with the slope k increasing with decreasing temperature. At 298K, in addition to dislocation glide and twinning, grain boundary sliding(GBS) becomes significant in samples with grain sizes below 3 μm, considerably enhancing the material's deformability. GBS activation provides an additional recovery mechanism for dislocations accumulating at grain boundaries, facilitating their absorption during sliding and rotation. Analysis of σ Θ relationship suggests that the basal slip is the dominant dislocation mode in mg at 298K. Decreasing grain size suppresses dislocation activity and twinning and increases GBS, resulting in lower Θ and σ Θ values. Suppressing conventional deformation modes coupled with enhanced GBS yields stress softening, breaking down the Hall-petch relationship in mg below 3 μm grain size, leading to an inverse Hall-petch behaviour. The work reports new data on the strength, ductility, work hardening and fracture behaviour, and their variations with mg grain size across different temperature regimes.

关键词： polycrystalline mg mechanical properties Deformation mechanisms Work-hardening Texture evolution Cryogenic temperatures Hall-petch relationship

Developing a two-decadal time-record of rice field m.ps using landsat-derived multi-index image collections with a random forest classifier:A Google Earth Engine based approach

在线全文

学校读者我要写书评

暂无评论

Information processing in Agriculture 2024年第2期11卷 260-275页

作者： W.Ashane m.Fernando I.p.Senanayake Department of Nano Science Technology Wayamba University of Sri LankaKuliyapitiya 60200Sri Lanka Dchoolf Engineing CllegeoEngineeringSience and EnionmentThe UniversyewcastleCallaghanW2Austraia

Historic m.ps showing the temporal distribution of rice fields are important for precision agriculture,irrigation optimisation,forecasting crop yields,land use management and formulating ***,m.pping rice felds using traditional ground surveys is impractical when high cost,time and labour requirements are considered,and the availability of such detailed records is *** satellite remote sensing appears to be a viable solution,conventional segmentation and classification methods with spectral bands are often unable to contrast the distinct characteristics between rice fields and other vegetation *** this end,we explored a novel,Google Earth Engine(GEE)based multiindex random forest(RF)classification approach to m.p rice fields over two *** images from 2000 to 2020 of two Sri lankan rice cultivation districts were extracted from GEE and a multi-index RF classification algorithm was applied to distinguish the rice *** results showed above 80%accuracy for both training and validation,when compared against high spatial resolution Google Earth *** essence,multi-index sampling and RF together synergised the compelling classifcation accuracy by effectively capturing vegetation,water(ponding)and soil characteristics unique to the rice felds using a single-click *** m.ps developed in this study were further compared against the mODIS land cover type product(mCD12Q1)and the corresponding superior statistics on rice fields demonstrated the robustness of the proposed *** work seeking effective index combinations is recommended,and this approach can potentially be extended to other crop analyses elsewhere.

关键词： Google Earth Engine(GEE) Image classification Random forest m.pping rice fields Time series analysis Vegetation index

In search of a pan-coronavirus vaccine:next-generation vaccine design and immune mechanisms

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Cellular & molecular Immunology 2024年第2期21卷 103-118页

作者： S.Cankat m.U.Demael l.Swadling Division of Infection and Immunity Institute of Immunity and TransplantationUniversity College LondonPears BuildingLondon NW32PPUK

members of the coronaviridae family are endemic to human populations and have caused several epidemics and pandemics in recent *** this review,we will discuss the feasibility of and progress toward the ultimate goal of creating a pan-coronavirus vaccine that can protect against infection and disease by all members of the coronavirus *** will detail the unmet clinical need associated with the continued transmission of SARS-CoV-2,mERS-CoV and the four seasonal coronaviruses(HCoV-OC43,Nl63,HKU1 and 229E)in humans and the potential for future zoonotic *** will highlight how first-generation SARS-CoV-2 vaccines and natural history studies have greatly increased our understanding of effective antiviral immunity to coronaviruses and have informed next-generation vaccine *** will then consider the ideal properties of a pan-coronavirus vaccine and propose a blueprint for the type of immunity that may offer ***,we will describe a subset of the diverse technologies and novel approaches being pursued with the goal of developing broadly or universally protective vaccines for coronaviruses.

关键词： Vaccine Coronavirus Cross-reactive immunity Cross-protection Universal

modelling dynamic pantograph loads with combined numerical analysis

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Railway Engineering Science 2024年第1期32卷 81-94页

作者： F.F.Jackson R.mishra J.m.Rebelo J.Santos p.Antunes J.pombo H.magalhaes l.Wills m.Askill School of Computing and Engineering University of HuddersfieldHuddersfieldUK School of Computing and Engineering Institute of Railway ResearchUniversity of HuddersfieldHuddersfieldUK IDmEC Instituto Superior TecnicoUniversidade de LisboaLisbonPortugal ISEl Instituto Politecnico de LisboaLisbonPortugal Hitachi Rail Newton AycliffeUK Wabtec/Brecknell Willis ChardUK

Appropriate interaction between pantograph and catenary is imperative for smooth operation of electric *** heights of overhead lines to accommodate level crossings,overbridges,and tunnels pose significant challenges in maintaining consistent current collection performance as the pantograph aerodynamic profile,and thus aerodynamic load changes significantly with operational *** research aims to analyse the global flow characteristics and aerodynamic forces acting on individual components of an HSX pantograph operating in different configurations and orientations,such that the results can be combined with multibody simulations to obtain accurate dynamic insight into contact ***,computational fluid dynamics simulations are used to investigate the pantograph component loads in a representative setting,such as that of the recessed cavity on a Class 800 *** an aerodynamic perspective,this study indicates that the total drag force acting on non-fixed components of the pantograph is larger for the knuckle-leading orientation rather than the knuckle-trailing,although the difference between the two is found to reduce with increasing pantograph *** the aerodynamic loads acting on individual components with multibody tools allows for realistic dynamic insight into the pantograph *** results obtained show how considering aerodynamic forces enhance the realism of the models,leading to behaviour of the pantograph-catenary contact forces closely matching that seen in experimental tests.

关键词： pantograph-catenary interaction pantograph aerodynamics Computational fluid dynamics pantograph loads Current collection performance

CO oxidation under lean and stoichiometric conditions over ceriazirconia with very low metal contents(Cu,Co,Ag and pt)

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第9期42卷 1669-1681,I0002页

作者： J.C.martínez-munuera m.p.Yeste A.García-García mCmA Group Department of Inorganic Chemistry and Institute of MaterialsUniversity of AlicanteCarretera de San Vicente del Raspeig s/n03690San Vicente del RaspeigAlicanteSpain Solid Chemistry and Catalysis Group Department of Materials ScienceMetallurgic Engineering and Inorganic ChemistryInstitute of Electronic Microscopy and Materials ResearchUniversity of CádizAp.40E-11510Puerto RealCádizSpain

In this work,several ceria-zirconia based catalysts with very lo w(and equimolar) metal contents were prepared,characterised and tested for the CO oxidatio n reaction(under lean and stoichiometric conditions),trying to emulate those conditions found in a diesel oxidation catalyst(DOC) system from a diesel engine and those encountered under gasoline exhaust(λ=1).The metals chosen are Cu,Co,Ag and pt(as a reliable benchmark).The results reveal enormous differences among reducibility and catalytic activity despite quite similar structural and textural properties of the catalysts,showing differences among dispersion(Ag-catalyst seems to present a low level of dispersion).This catalyst seems to be characterised,as well,by a strong electronic interaction between Ce and Ag centres which is suggested to yield an improved reducibility under H_(2)-TpR ***,the order in catalytic activity(Cu>Ag>Co≈pt>>support) seems not to follow the order found in reducibility and the Cu-catalyst seems to be the most active independently on the reaction conditions,yielding nearly overlapped CO oxidation catalytic *** restingly,a stro ng correlation between the catalytic activity under the two conditions tested and the OSC values of the Ce_(0.8)Zr_(0.2)O_(2)-supported metal catalysts is ***,OSC parameter measured at 150℃ can be used as a relevant descriptor to evaluate the CO oxidation activity at low and medium conversions for the investigated catalysts,much better than the H_(2)-TpR measurements.

关键词： CO oxidation low metal content Ceria-zirconia Copper species OSC parameter Rare earths

Elucidating the Degradation pathways of Human Insulin in the Solid State

在线全文

学校读者我要写书评

暂无评论

Journal of Analysis and Testing 2024年第03期8卷 288-299页

作者： Andrew Fagan lorraine m.Bateman Joseph p.O'Shea Abina m.Crean SSpC the SFI Centre for Pharmaceutical Research School of Pharmacy University College Cork School of pharmacy University College Cork Analytical and Biological Chemistry Research Facility (ABCRF) University College Cork School of Chemistry University College Cork

While there have been significant advances in the development of peptide oral dosage forms in recent years, highlighted by the clinical and commercial success of approved peptides such as Rybelsus?, there remain several barriers in the way of broad range applicability of this approach to peptide delivery. One such barrier includes the poor physical and chemical stability inherent to their structures, which persists in the solid state although degradation typically occurs at different rates and via different pathways in comparison to the solution state. Using insulin as a model peptide, this work sought to contribute to the development of analytical techniques for investigating common insulin degradation pathways. Chemically denatured,deamidated and aggregated samples were prepared and used to benchmark circular dichroism spectroscopy, reverse phase HplC and size exclusion chromatography methods for the investigation of unfolding, chemical modifications and covalent aggregation of the insulin molecule respectively. Solid state degraded samples were prepared by heating insulin powder at 60 °C and 75% relative humidity for 1, 3, 5 and 7 d, and the degradation profiles of the samples were evaluated and compared with those observed in solution. While no unfolding was observed to occur, significant deamidation and covalent aggregation were detected. Reductive disulfide bond cleavage using dithiothreitol allowed for separation of the insulin A-and B-chains,offering a facile yet novel means of assessing the mechanisms of deamidation and covalent aggregation occurring in the solid state.

关键词： Biopharmaceutical analysis Covalent aggregation Deamidation Disulfide cleavage Insulin Solid state Stability

In vivo and in vitro study of resorbable magnesium wires for medical implants:mg purity,surface quality,Zn alloying and polymer coating

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第6期12卷 2472-2488页

作者： K.Tesar J.luňácková m.Jex m.Žaloudková R.Vrbová m.Bartoš p.Klein l.Vištejnová J.Dušková E.Filová Z.Sucharda m.Steinerová S.Habr K.Balík A.Singh Department of materials Faculty of Nuclear Sciences and Physical EngineeringCzech Technical University in PragueTrojanova 13Prague 12000Czech Republic Institute of physics Czech Academy of SciencesNa Slovance 2Prague 18221Czech Republic Institute of Dental medicine First Faculty of MedicineCharles University and General University Hospital in PragueKaterinská32Prague 12801Czech Republic Department of physics Faculty of Nuclear Sciences and Physical EngineeringCzech Technical University in PragueBrehová7Prague 11519Czech Republic Department of Composites and Carbon materials Institute of Rock Structure and MechanicsCzech Academy of SciencesV Holešovickách 41Prague 18209Czech Republic Institute of Anatomy First Faculty of MedicineCharles UniversityU Nemocnice 3Prague 12800Czech Republic Biomedical Center Faculty of Medicine in PilsenCharles UniversityAlej Svobody 76Pilsen 32300Czech Republic Department of pathological physiology Faculty of Medicine in PilsenCharles UniversityAlej Svobody 7632300 PilsenCzech Republic Department of Histology and Embryology Faculty of Medicine in PilsenCharles UniversityAlej Svobody 7632300 PilsenCzech Republic Institute of pathology First Faculty of MedicineCharles University and General University Hospital in PragueStudnickova 2Prague 12800Czech Republic Department of Biomaterials and Tissue Engineering Institute of PhysiologyCzech Academy of SciencesVidenska 1083Prague 14200Czech Republic Research Center for Structural materials National Institute for Materials Science1-2-1 SengenTsukuba 305-0047Japan

magnesium is an excellent material in terms of biocompatibility and its corrosion products can serve as an active source for new bone ***,localized corrosion and H_(2)generation limit the potential of mg-based *** low-alloyed mg-Zn wires can strongly reduce problems with large H_(2)bubbles and improve the mechanical properties considerably while maintaining excellent long-term *** pickling and a polymer coating can be effectively used to lower the rate of in vivo *** this work,microstructural,mechanical,and in vitro characterization of 250μm and 300μm extruded wires made from ultra-pure mg,commercially pure mg,mg-0.15Zn,mg-0.4Zn and mg-1Zn was ***,mg-0.4Zn wires together with a variant coated with a copolymer of l-lactide andε-caprolactone were tested in vivo on artificially damaged Wistar rat *** on the observed mg-induced osteogenesis,polymer-coated mg wires with a small addition of Zn are a perspective material for bone-support applications,such as cerclage and fixation wires.

关键词： magnesium Resorbable mg wire mg-Zn implant degradation Biocompatibility study Zn grain boundary segregation

laser-induced graphene-coated wearable smart textile electrodes for biopotentials signal monitoring

在线全文

学校读者我要写书评

暂无评论

Frontiers of materials Science 2024年第1期18卷 95-111页

作者： C.m.Vidhya Yogita maithani Sakshi Kapoor J.p.Singh Department of physics Indian Institute of Technology DelhiHauz KhasNew Delhi 110016India

This paper describes how to produce a wearable dry electrode at a reasonable cost and how to use it for the monitoring of biopotentials in *** textiles in wearable technologies have made a great advancement in the health care management and living standards of *** was manufactured using the low-cost single-step process,laser ablation of polyimide,a commercial *** dispersions were made using solvent isopropyl alcohol which has low boiling point,nontoxicity,and environmental *** successive coating of the graphene dispersion on the cotton fabric to make it conductive,the sheet resistance of the resulting fabric dropped to 3% of its initial *** laser-induced graphene(lIG)cotton dry electrodes thus manufactured are comparable to Ag/AgCl wet electrodes in terms of the skin-to-electrode impedance,measuring between 78.0 and 7.2 kΩ for the frequency between 40 Hz and 1 *** lIG cotton electrode displayed a signal-to-noise ratio of 20.17 *** to its comfort,simplicity,and good performance over a longer period of time,the textile electrode appears suited for medical applications.

关键词： biopotential electrocardiogram electromyogram flexible electrode textile porous graphene

magnesium oxide(mgO)nanoadsorbents in wastewater treatment:A comprehensive review

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第5期12卷 1709-1773页

作者： H.C.S.perera V.Gurunanthanan Anoop Singh m.m.m.G.p.G.mantilaka G.Das Sandeep Arya Department of physics Khalifa UniversityAbu Dhabi12788United Arab Emirates postgraduate Institute of Science University of PeradeniyaPeradeniyaSri Lanka Department of Humanities and Sciences Guru Nanak Institutions Technical CampusIbrahimpatnamHyderabad501506India Centre for Global Health Research Saveetha Medical College and HospitalsSaveetha Institute of Medical and Technical SciencesChennai602105Tamil NaduIndia Department of physics University of JammuJammu and Kashmir180006India

Wastewater contamination by heavy metals and synthetic dyes presents a significant environmental challenge,necessitating effective and sustainable separation *** review article provides a detailed examination of magnesium oxide(mgO)nanoparticles as an innovative nanoadsorbent for wastewater treatment,with a specific focus on heavy metal and dye *** review comprehensively explores various aspects of mgO nanoparticles,including their structural characteristics and synthesis *** article delves into the morphology and crystallographic arrangement of mgO nanoparticles,offering insights into their structural *** the complexity of adsorption processes,the review identifies and analyzes parameters influencing the adsorption efficiency of mgO nanoparticles,such as temperature,pH,contact time,initial concentration,and co-existing *** interplay between these parameters and the adsorption capability of mgO nanoparticles emphasizes the importance of optimizing operational ***,the review assesses various synthesis methods for mgO nanoparticles,including sol-gel,hydrothermal,precipitation,green synthesis,solvothermal,and template-assisted *** discusses the advantages,limitations,and resulting nanoparticle characteristics of each method,enabling readers to grasp the implications of synthesis processes on adsorption *** comprehensive review consolidates current insights into the effectiveness of mgO nanoparticles as a potent nanoadsorbent for removing heavy metals and dyes from wastewater covering a wide spectrum of aspects related to mgO ***,there is a need to investigate the use of mgO in the treatment of actual wastewater or river water,in order to leverage its cost-effectiveness and high efficiency for practical water treatment applications in real-time.

关键词： mgO nanoparticles Nanoadsorbent Wastewater treatment Heavy metals Dye separation Adsorption Synthesis methods