检索结果-南通市图书馆

Effect of cold-working on corrosion induced damage in lug joints

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第6期36卷 175-182页

作者： Ramanath m.N Chikmath l. murthy H. Department of Aerospace Engineering Indian Institute of Technology-MadrasChennai 600036India Department of Aeronautical Engineering KLS Gogte Institute of TechnologyBelagavi 590008India

lug joints are preferred joineries for transferring heavy loads to parent components in aerospace *** experience corrosion due to environmental conditions,improper surface finishes and rubbing displacement between the pin and *** causes damage of different sizes and shapes near the *** degradation due to corrosion-induced damage is modelled as a through-pit at one of the identified critical locations through stress *** effect of this pit on fatigue crack initiation life is ***-hole is pre-stressed by cold-working and the benefits of inducing plastic wake on the intended performance of the lug joint during the damages due to corrosion are brought out and compared with non-cold-worked *** analysis is performed on this lug joint with *** results obtained highlight the benefits of cold-working and the methodology can be extended to damage growth and analyse the effect of surface treatments for better structural integrity of components of aerospace vehicles.

关键词： lug joint Corrosion Crack initiation Cold-working Structural integrity

Effect of radiative loss mechanisms on FIR thermometric parameters of Nd^(3+)-doped lithium tellurite glasses

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第7期42卷 1250-1257,I0002页

作者： C.Y.morassuti A.P.l Silva l.A.O.Nunes S.m.lima l.H.C.Andrade Optical and Photothermal Spectroscopy Group(GEOF) Center for Studies in Natural Resources(CERNA)State University of Mato Grosso do Sul(UEMS)C.P.351DouradosMSBrazil Renato Archer Information Technology Center Dom Pedro I Highway(SP-65)Km 1436-Chácaras Campos dos AmaraisCampinasSPBrazil Institute of Physics of São Carlos University of São PauloSão CarlosSPBrazil

Nd^(3+)-doped tellurite glasses are promising materials for thermometers based on the fluorescence intensity ratio(FIR)***,at high Nd^(3+)concentrations,energy transfer(ET)processes such as optical reabsorption and cross-relaxation can affect the Nd^(3+)emission,which has been little explored in the ***,the present work investigated the use of Nd^(3+)-doped tellurite glass(samples doped with Nd^(3+)at 0.2 mol%,0.5 mol%,2.0 mol%,and 4.0 mol%)in fluorescence thermometers,in the temperature range from 299 to 371 *** results indicate a strong dependence of the FIR parameters on the Nd^(3+)concentration,due to changes in the emission band profiles caused by optical reabsorption of the Nd^(3+)emissions and cross-relaxation processes.A decrease of the relative sensitivity of the ratio^(4)F_(5/2)→^(4)I_(9/2)/^(4)F_(3/2)→^(4)I_(9/2)is observed for samples doped with higher amounts of Nd^(3+).The maximum relative sensitivity at 299 K is 3.00%/K,which is the highest value among the reported Nd^(3+)ions.

关键词： Nd^(3+)-doped tellurite glass Fluorescence intensity ratio Optical thermometry Judd-Ofelt Rare earths

A comprehensive review on the processing-property relationships of laser strengthened magnesium

在线全文

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第1期12卷 1-34页

作者： Alessandro m.Ralls Aaksheta Agnel Pradeep l.menezes Department of mechanical Engineering University of Nevada RenoRenoNV 89557United States

Among the existing series of softer metals,magnesium(mg)has attracted much attention due to its impressive strength-to-weight ***,due to its ease of deformability,mg tends to suffer from rapid degradation in a wide variety of abrasive and electrochemical *** method of improving its surface properties is through surface modification *** the existing techniques,laser shock peening(lSP)has been one of the most widely utilized processes due to its surface-hardening-like *** this understanding,a comprehensive review has yet to exist that encapsulates the strengthening mechanism of lSP for mg and its influence in degradation *** review aims to encapsulate the existing research around the lSP field for ***,an understanding of the surface-strengthening effects in relation to its mechanical,tribological,corrosion,and tribo-corrosion characteristics is ***,the feasibility of lSP for mg materials in critical industries is also *** this work,a novel understanding of lSP for mg can be understood,which can provide a future direction for research in this field.

关键词： laser shock peening magnesium Surface deformation Tribology microstructure

Spark Plasma Sintering of mg-based Alloys:microstructure,mechanical Properties,Corrosion Behavior,and Tribological Performance

在线全文

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第2期12卷 405-442页

作者： Alessandro m.Ralls mohammadreza Daroonparvar Pradeep l.menezes Department of mechanical Engineering University of Nevada RenoRenoNV89557United States

Within the past ten years,spark plasma sintering(SPS)has become an increasingly popular process for mg *** the SPS process,interparticle diffusion of compressed particles is rapidly achieved due to the concept of Joule *** to traditional and additive manufacturing(Am)techniques,SPS gives unique control of the structural and microstructural features of mg *** doing so,their mechanical,tribological,and corrosion properties can be *** great advancements in this field have been made,these pieces of knowledge are scattered and have not been contextualized into a single *** motivation of this work is to address this scientific gap and to provide a groundwork for understanding the basics of SPS manufacturing for *** do so,the existing body of SPS mg literature was first surveyed,with a focus on their structural formation and degradation *** was found that successful mg SPS fabrication highly depended on the processing temperature,particle size,and particle *** addition of metal and ceramic composites also affected their microstructural features due to the Zener pinning *** degradative environments,their performance depends on their structural features and whether they have secondary phased *** industrial applications,SPS'd mg was found to have great potential in biomedical,hydrogen storage,battery,automotive,and recycling *** prospects to advance the field include using mg as a doping agent for crystallite size refinement and using bulk metallic mg-based glass powders for amorphous SPS *** these findings,the interactions of multi-composites on the processing-structure-property relationships of SPS mg is not well *** total,this work will provide a useful direction in the SPS field and serve as a milestone for future mg-based SPS manufacturing.

关键词： Spark plasma sintering magnesium alloys Nanocrystalline Tribology mechanical properties Corrosion

Corrosion testing of X52 and X80 steels immersed in stimulated emulsions using a real petroleum sample

在线全文

学校读者我要写书评

暂无评论

Petroleum Research 2024年第2期9卷 304-316页

作者： l.m.Quej-Ake J.l.Alamilla A.Contreras Instituto mexicano del Petróleo Eje Central Lázaro CárdenasNorte 152San Bartolo AtepehuacanGustavo A.MaderoCiudad de MéxicoC.P.07730México

The aim of this study is to evaluate the internal corrosion process on X52 and X80 steels/real petroleum interfaces containing condensed hydrocarbon plus oilfield-produced water,which were subjected to stimulated emulsions using 50/50 vol ratio mixtures at 45℃,different hydrodynamic conditions,1 h,and 24 h.A washing process by using deionized water was proposed to simulate and identify the corrosiveness of the hydrocarbon phase after 24 h of exposure *** characterization by electrochemical impedance spectroscopy and the monitoring of the polarization curves indicated that X80 steel/oilfield-produced water interfaces were more susceptible to corrosion than X52 steel exposed to oilfield-produced *** combined speed rotation of 600 rpm using a magnetic stirrer+600 rpm using a rotating disk electrode decreased the corrosion rate on X52 *** stimulated emulsions made of hydrocarbon+oilfield-produced water and hydrocarbon+deionized water at 24 h increased the corrosion rate on X80 steel(0.34 mm/year and 0.43 mm/year,respectively),promoting the formation of erosion and pitting *** types of corrosion depended mainly on the physicochemical properties of the hydrocarbon,oilfield-produced water,exposure times,and hydrodynamic systems in which the hydrocarbon was studied.

关键词： Corrosion Emulsions X52 steel X80 steel

A seed and soil model of loneliness in Alzheimer's disease

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第12期19卷 2575-2576页

作者： Hannah l.Apostolou Ian m.mcDonough Department of Psychology The University of AlabamaTuscaloosaALUSA Department of Psychology Binghamton UniversityBinghamtonNYUSA

loneliness is classically defined as a result of perceiving a discrepancy between the desired quantity and quality of one's social life and actual social relationships(Perlman and Peplau,1984).lifespan research has indicated older adults are among the highest risk for experiencing loneliness because their social network size decreases more frequently than that of younger adults.

关键词： Alzheimer younger soil

Semi-analytical investigation of heat transfer in a porous convective radiative moving longitudinal fin exposed to magnetic field in the presence of a shape-dependent trihybrid nanofluid

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第1期45卷 197-216页

作者： C.G.PAVITHRA B.J.GIREESHA m.l.KEERTHI Department of PG Studies and Research in mathematics Kuvempu UniversityShankaraghatta 577451India Department of mathematics and Statistics M.S.Ramaiah University of Applied SciencesBengaluru 560058India

The thermal examination of a non-integer-ordered mobile fin with a magnetism in the presence of a trihybrid nanofluid(Fe_3O_4-Au-Zn-blood) is carried out. Three types of nanoparticles, each having a different shape, are considered. These shapes include spherical(Fe_3O_4), cylindrical(Au), and platelet(Zn) configurations. The combination approach is utilized to evaluate the physical and thermal characteristics of the trihybrid and hybrid nanofluids, excluding the thermal conductivity and dynamic viscosity. These two properties are inferred by means of the interpolation method based on the volume fraction of nanoparticles. The governing equation is transformed into a dimensionless form, and the Adomian decomposition Sumudu transform method(ADSTm) is adopted to solve the conundrum of a moving fin immersed in a trihybrid nanofluid. The obtained results agree well with those numerical simulation results, indicating that this research is reliable. The influence of diverse factors on the thermal overview for varying noninteger values of γ is analyzed and presented in graphical representations. Furthermore, the fluctuations in the heat transfer concerning the pertinent parameters are studied. The results show that the heat flux in the presence of the combination of spherical, cylindrical, and platelet nanoparticles is higher than that in the presence of the combination of only spherical and cylindrical nanoparticles. The temperature at the fin tip increases by 0.705 759% when the value of the Peclet number increases by 400%, while decreases by 11.825 13% when the value of the Hartman number increases by 400%.

关键词： convection radiation moving longitudinal fin Adomian decomposition Sumudu transform method(ADSTm) trihybrid nanofluid magnetic field

In search of a pan-coronavirus vaccine:next-generation vaccine design and immune mechanisms

在线全文

学校读者我要写书评

暂无评论

Cellular & molecular Immunology 2024年第2期21卷 103-118页

作者： S.Cankat m.U.Demael l.Swadling Division of Infection and Immunity Institute of Immunity and TransplantationUniversity College LondonPears BuildingLondon NW32PPUK

members of the coronaviridae family are endemic to human populations and have caused several epidemics and pandemics in recent *** this review,we will discuss the feasibility of and progress toward the ultimate goal of creating a pan-coronavirus vaccine that can protect against infection and disease by all members of the coronavirus *** will detail the unmet clinical need associated with the continued transmission of SARS-CoV-2,mERS-CoV and the four seasonal coronaviruses(HCoV-OC43,Nl63,HKU1 and 229E)in humans and the potential for future zoonotic *** will highlight how first-generation SARS-CoV-2 vaccines and natural history studies have greatly increased our understanding of effective antiviral immunity to coronaviruses and have informed next-generation vaccine *** will then consider the ideal properties of a pan-coronavirus vaccine and propose a blueprint for the type of immunity that may offer ***,we will describe a subset of the diverse technologies and novel approaches being pursued with the goal of developing broadly or universally protective vaccines for coronaviruses.

关键词： Vaccine Coronavirus Cross-reactive immunity Cross-protection Universal

Consumer transparency in the production chain for plant varieties produced using new genomic techniques

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

aBIOTECH 2024年第2期5卷 239-246页

作者： J.m.lukasiewicz C.C.m.van de Wiel l.A.P.lotz m.J.m.Smulders Wageningen University&Research P.O.Box 386NL-6700 AJ WageningenThe Netherlands

Plants edited with new genomic techniques(NGTs)currently fall under the Genetically modified Organisms Directive(2001/18/EC)in the European *** the proposal of the European Commission,NGT plants are partially exempted from the regulations of this *** proposal makes a distinction between two categories of NGT plants:NGT-1 and ***-1 category plants are considered equal to plants obtained through conventional breeding *** plants will not be labelled for the consumer,although they will be labelled as ***-2 category plants may be labelled with additional information as a positive *** of seeds of varieties made with gene editing,but not the products,would mean that most steps in the production chain are transparent,but not the last step towards ***“right to know”and increasing knowledge of gene-edited food is a common theme in food labelling towards ***,we describe current labelling regimes and registers and how these may be applied to provide transparency on gene-edited products to ***,we also look into consumer studies,which indicate a greater acceptance of gene-edited food among consumers,especially when additional benefits such as sustainability are mentioned.

关键词： labelling New genomic techniques Consumer transparency Plant products