检索结果-南通市图书馆

Hydrometallurgical recovery of lithium carbonate and iron phosphate from blended cathode materials of spent lithium-ion battery

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第3期43卷 1275-1287页

作者： shao-Le Song Run-qing Liu Miao-Miao Sun Ai-Gang Zhen Fan-Zhen Kong Yue Yang School of Minerals Processing and Bioengineering Central South UniversityChangsha410083China Zhejiang Tianneng New Materials Co. Ltd.Huzhou313103China

The recycling of cathode materials from spent lithium-ion battery has attracted extensive attention,but few research have focused on spent blended cathode *** reality,the blended materials of lithium iron phosphate and ternary are widely used in electric vehicles,so it is critical to design an effective recycling *** this study,an efficient method for recovering Li and Fe from the blended cathode materials of spent LiFePO_(4)and LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)batteries is ***,87%A1 was removed by alkali ***,91.65%Li,72.08%Ni,64.6%Co and 71.66%Mn were further separated by selective leaching with H_(2)SO_(4)and H_(2)O_(2).Li,Ni,Co and Mn in solution were recovered in the form of Li_(2)CO_(3)and hydroxide ***,98.38%Fe was leached from the residue by two stage process,and it is recovered as FePO_(4)·2H_(2)O with a purity of 99.5%by *** and P were present in FePO_(4)·2H_(2)O in amounts of 28.34%and 15.98%,***,the drift and control of various components were discussed,and cost-benefit analysis was used to assess the feasibility of potential application.

关键词： Spent lithium-ion battery Blended cathode materials Recovery Lithium carbonate Iron phosphate

Prescribed Performance Tracking Control of Time-Delay Nonlinear Systems With Output Constraints

在线全文

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第7期11卷 1557-1565页

作者： Jin-Xi Zhang Kai-Di Xu qing-Guo wang IEEE the State Key Laboratory of Synthetical Automation for Process Industries Northeastern UniversityShenyang 110819China Institute of Artificial Intelligence and Future Networks Beijing Normal UniversityZhuhai 519087 Guangdong Key Laboratory of Artificial Intelligence and Multi-Modal Data Processing Beijing Normal University-Hong Kong Baptist University United International CollegeZhuhai 519087

The problem of prescribed performance tracking control for unknown time-delay nonlinear systems subject to output constraints is dealt with in this paper. In contrast with related works, only the most fundamental requirements, i.e., boundedness and the local Lipschitz condition, are assumed for the allowable time delays. Moreover, we focus on the case where the reference is unknown beforehand, which renders the standard prescribed performance control designs under output constraints infeasible. To conquer these challenges, a novel robust prescribed performance control approach is put forward in this ***, a reverse tuning function is skillfully constructed and automatically generates a performance envelop for the tracking error. In addition, a unified performance analysis framework based on proof by contradiction and the barrier function is established to reveal the inherent robustness of the control system against the time delays. It turns out that the system output tracks the reference with a preassigned settling time and good accuracy,without constraint violations. A comparative simulation on a two-stage chemical reactor is carried out to illustrate the above theoretical findings.

关键词： Nonlinear systems output constraints prescribed performance reference tracking time delays

Rheological Behaviors of Polymers with Nanoparticles Tethered at Each End

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第3期42卷 400-406,I0009页

作者： Song-Qi Zhang Wen-qing wang Jia-Ping Lin Li-Quan wang Shanghai Key Laboratory of Advanced Polymeric Materials Key Laboratory for Ultrafine Materials of Ministry of EducationSchool of Materials Science and EngineeringEast China University of Science and TechnologyShanghai 200237China

The polymer with nanoparticles tethered at each end is a unique model for unraveling the effect of chain ends on the polymer dynamics. We investigated the rheological behavior of this kind of polymer by using nonequilibrium molecular dynamics simulation. The effect of polymer lengths and nanoparticle radii on the complex moduli and viscosity was examined. The dependence of complex moduli on the frequency becomes less pronounced as the polymer is short or the nanoparticle is large. The shear thinning behavior was revealed for these systems, and the scaling exponent of complex viscosity with respect to the frequency was found to change from-1/2 to-3/4 as the polymer shortens or the nanoparticle enlarges. The rheological behavior was further explained by analyzing the mean square distance of nanoparticles. The simulation results were compared with the existing experimental finding, showing an agreement. The work provides information for understanding the chain end effect on polymer rheology.

关键词： Polymer rheology Modulus Viscosity Molecular dynamics

Preparation and Reinforcement Adaptability of Jute Fiber Reinforced Magnesium Phosphate Cement Based Composite Materials

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第4期39卷 999-1009页

作者：刘芯州郭远臣 wang Rui XIANG Kai wang Xue YE qing College of Civil Engineering Chongqing Three Gorges UniversityChongqing 404100China

To improve the brittleness characteristics of magnesium phosphate cement-based materials(MPC)and to promote its promotion and application in the field of structural reinforcement and repair,this study aimed to increase the toughness of MPC by adding jute fiber,explore the effects of different amounts of jute fiber on the working and mechanical properties of MPC,and prepare jute fiber reinforced magnesium phosphate cement-based materials(JFRMPC)to reinforce damaged *** improvement effect of beam performance before and after reinforcement was compared,and the strengthening and toughening mechanisms of jute fiber on MPC were explored through microscopic *** experimental results show that,as the content of jute fiber(JF)increases,the fluidity and setting time of MPC decrease continuously;When the content of jute fiber is 0.8%,the compressive strength,flexural strength,and bonding strength of MPC at 28 days reach their maximum values,which are increased by 18.0%,20.5%,and 22.6%compared to those of M0,*** beam strengthened with JFRMPC can withstand greater deformation,with a deflection of 2.3 times that of the unreinforced beam at *** strain of the steel bar is greatly reduced,and the initial crack and failure loads of the reinforced beam are increased by 192.1%and 16.1%,respectively,compared to those of the unreinforced *** JF added to the MPC matrix dissipates energy through tensile fracture and debonding pull-out,slowing down stress concentration and inhibiting the free development of cracks in the matrix,enabling JFRMPC to exhibit higher strength and better *** JF does not cause the hydration of MPC to generate new compounds but reduces the amount of hydration products generated.

关键词： magnesium phosphate cement jute fiber reinforcement of damaged beam flexural behavior

Insight into the spoilage heterogeneity of meat-borne bacteria isolates with high-producing collagenase

在线全文

学校读者我要写书评

暂无评论

Food Science and Human Wellness 2024年第3期13卷 1402-1409页

作者： Haodong wang Liangting shao Jinhao Zhang Xinglian Xu Jianjun Li Huhu wang Jiangsu Collaborative Innovation Center of Meat Production and Processing Quality and Safety ControlCollege of Food Science and TechnologyNanjing Agricultural UniversityNanjing 210095China Yantai Xiwang Meat Food Co. Ltd.Yantai 264000China

Chilled chicken is inevitably contaminated by microorganisms during slaughtering and processing,resulting in *** parts of chilled chicken,especially wings,feet,and other skin-on products,are abundant in collagen,which may be the primary target for degradation by spoilage *** this work,a total of 17 isolates of spoilage bacteria that could secrete both collagenase and lipase were determined by raw-chicken juice agar(RJA)method,and the results showed that 7 strains of Serratia,Aeromonas,and Pseudomonas could significantly decompose the collagen *** gelatin zymography showed that Serratia liquefaciens(F5)and(G7)had apparent degradation bands around 50 kDa,and Aeromonas veronii(G8)and Aeromonas salmonicida(H8)had a band around.65 and 95 kDa,*** lipase and collagenase activities were detected isolate-by-isolate,with F5 showing the highest collagenase *** spoilage ability on meat in situ,F5 performed strongest in spoilage ability,indicated by the total viable counts,total volatile basic nitrogen content,sensory scores,lipase,and collagenase *** study provides a theoretical basis for spoilage heterogeneity of strains with high-producing collagenase in meat.

关键词： Bacteria Chilled chicken Heterogeneity Collagenase Spoilage

Spatial light modulation for femtosecond laser manufacturing:Current developments and challenges

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第1期67卷 60-72页

作者： ZANG Xue LIU ZiTing XU YiShi wang Yi wang qing LI ZhenZe wang Lei State Key Laboratory of Integrated Optoelectronics College of Electronic Science and EngineeringJilin UniversityChangchun 130012China State Key Laboratory of Precision Measurement and Instruments Department of Precision InstrumentTsinghua UniversityBeijing 100084China

Since the invention of lasers,spatial-light-modulated laser processing has become a powerful tool for various *** enables multidimensional and dynamic modulation of the laser beam,which significantly improves the processing efficiency,accuracy,and flexibility,and presents wider prospects over traditional mechanical technologies for machining three-dimensional,hard,brittle,or transparent *** this review,we introduce:(1)The role of spatial light modulation technology in the development of femtosecond laser manufacturing;(2)the structured light generated by spatial light modulation and its generation methods;and(3)representative applications of spatial-light-modulated femtosecond laser manufacturing,including aberration correction,parallel processing,focal field engineering,and polarization ***,we summarize the present challenges in the field and possible future research.

关键词： femtosecond laser manufacturing spatial light modulation structured light aberration correction parallel processing focal field engineering polarization control

Probing the interseismic locking state of the Xianshuihe fault based on a viscoelastic deformation model

在线全文

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第1期67卷 134-145页

作者： Yage ZHU Faqi DIAO Fei CHEN Yuebing wang Zhigang shao Rongjiang wang Xiong XIONG Hubei Subsurface Multi-Scale Imaging Key Laboratory School of Geophysics and GeomaticsChina University of GeosciencesWuhan 430074China China Earthquake Networks Center Beijing 100045China Institute of Earthquake Forecasting China Earthquake AdministrationBeijing 100036China

The interseismic locking state of tectonic faults is essential for regional seismic hazard ***,it is challenging to obtain this parameter reliably due to the weak deformation and complex model *** better probe the fault locking state,more reliable physical models and well-covered observations are *** we investigate the locking state of the Xianshuihe fault based on a new-developed viscoelastic deformation ***,we combine GPS velocities from 13 new near-field stations and existing stations in this region to improve the spatial *** to the theoretical predictions,our results indicate that the elastic model will clearly overestimate the fault locking depth and seismic moment accumulation rate,and the fault slip rate inferred from the elastic model is slightly lower than that from the viscoelastic *** on the locking distribution inferred from the viscoelastic model,we identify four potential asperities on the Xianshuihe *** importantly,we find a clear spatial correlation between the fault locking distribution and the rupture extent of historical earthquakes,which indicates that the fault locking state may control the rupture extent and thus the magnitude of *** addition,our results show that the 2022 M6.8 Luding earthquake only ruptured the south part of a potential asperity,and the accumulated energy in the northern unruptured area is equivalent to an Mw6.9 earthquake,where the seismic hazard deserves special attention.

关键词： Fault kinematics Viscoelastic relaxation effect GPS observations Seismic hazard The 2022 M6.8 Luding earthquake

Switching,explosion,and chaos of multi-wavelength soliton states in ultrafast fiber lasers

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第7期67卷 82-90页

作者： Zhi-Zeng Si Yue-Yue wang Chao-qing Dai College of Optical Mechanical and Electrical EngineeringZhejiang A&F UniversityLin’an 311300China

Because of the complexity and difficulty of realizing a multi-wavelength soliton state,reports on its internal dynamic characteristics are *** this study,the switching and periodic soliton explosion processes of the multi-wavelength soliton state in a negative dispersion passively mode-locked fiber laser are *** generation of the multi-wavelength soliton state undergoes the process of noise,oscillation,and stable mode-locking,and the splitting and annihilation of solitons with different group velocities directly impact the generation and disappearance of three *** and negative dispersion lead to different group velocities of *** presence and displacement of solitons with different group velocities cause soliton collisions,which lead to soliton explosions.A soliton experiences relative phase oscillation,chaos,and oscillation,as well as convergence and separation before and after an *** an increase in parameters related to pump power,single-soliton oscillation,multi-wavelength solitons,and chaos are found in experiments and simulations,proving the relevance and reliability between simulation and experimental *** work promotes the dynamical study of multi-soliton collisions in nonlinear science and the development of chaos theory in multi-comb lasers.

关键词： multi-wavelength fiber laser soliton explosion chaos state switching real-time dynamics

同方期刊数据库

Constitutive Behavior of the Interface between UHPC and Steel Plate without Shear Connector:From Experimental to Numerical Study

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第8期140卷 1863-1888页

作者： Zihan wang Boshan Zhang Hui wang qing Ai Xingchun Huang School of Naval Architecture Ocean and Civil EngineeringShanghai Jiao Tong UniversityShanghai200240China Department of Bridge Engineering Tongji UniversityShanghai200092China

The application of ultra-high performance concrete(UHPC)as a covering layer for steel bridge decks has gained widespread *** employing a connection without a shear connector between the steel plate and UHPC,namely,the sandblasted interface and the epoxy adhesive with sprinkled basalt aggregate interface,the installation cannot only be simplified but also the stress concentration resulting from the welded shear connectors can be *** study develops constitutive models for these two interfaces without shear connectors,based on the interfacial pull-off and push-out *** validation,three-point bending tests on the steel-UHPC composite plates are *** results indicated that the proposed bilinear traction-separation model for the sandblasted interface and the trapezoidal traction-separation model for the epoxy adhesive with sprinkled basalt aggregate interface can generally calibrate the interfacial ***,the utilization of the experimentally determined pure shear strength underestimates the load-carrying capacity of the composite plates in the case of three-point bending *** recalling the Mohr-Coulomb criterion,this underestimation is attributed to the enhancement of the interface shear strength by the presence of normal stress.

关键词： Cohesive zone model interfacial behavior finite element simulation UHPC steel plate