检索结果-南通市图书馆

Case study of hydraulic fracturing in an offshore carbonate oil reservoir

Petroleum Research 2022年第4期7卷 419-429页

作者： mohammad azad Mojtaba Ghaedi Amir Farasat Hadi Parvizi Hamed Aghaei Department of Petroleum Engineering School of Chemical and Petroleum EngineeringShiraz UniversityIran Iranian Offshore Oil Company TehranIran Petroxin Ltd LondonUnited Kingdom

Maximizing petroleum production while efficiently managing the operational costs is the oil and gas industry's primary goal which requires innovative engineering approaches and production-enhancing treatments such as hydraulic fracturing(HF).During the HF process,the injected fluid mixed with sands or proppants will create permanent fluid channels to drain more of the reservoir *** level of complexity and various constraints involved in real field treatments have made HF even more chal-lenging in layered carbonate reservoirs with the water drive mechanism.A prominent concern is the downward fracture growth to the oil/water contact zone that may cause unfavorable water cut *** fracture height confinement criterion necessitates optimization of fracture dimension *** height development is mainly a function of in-situ stress conditions and stress magnitude differences between geologic *** cases with a water table at the proximity of the wellbore,fracture height directly affects the operational *** paper demonstrates a practical step-by-step approach towards the design of hydraulic fracturing treatment in an offshore carbonate oil *** modeling process involves optimization of the location,number,and conductivity of the proposed ***-jection of high viscosity fluid causes a bi-wing vertical planar fracture to propagate perpendicular to the direction of minimum horizontal stress in the strike-slip faulting *** of the induced hydraulic fractures are also impacted by the amount and type of ***,as with this case study,the magnitude of vertical stress is in the same range as the maximum horizontal stress;the fracture height growth is the limiting *** LGR method is used to define fractures in the dynamic reservoir model which has been built based on a complete set of data ranging from the analyses of logs,core samples,and seismic details,to perform production forecasts and economic ev

关键词： Hydraulic fracture design Carbonate reservoirs Proppant selection Economic analysis Reservoir modeling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Preparation of stable colloidal suspensions of superdisintegrants via wet stirred media milling

引用

Particuology 2014年第3期12卷 76-82页

作者： mohammad A.azad Afolawemi Afolabi Nikita Patel Rajesh Davé Ecevit Bilgili Otto H.York Department of Chemical Biologicaland Pharmaceutical EngineeringNew Jersey Institute of TechnologyNewarkNJUSA

Superdisintegrants are cross-linked polymers that can be used as dispersants for fast release of drug nanoparticles from nanocomposite microparticles during in vitro and in vivo dissolution. Currently avail- able superdisintegrant particles have average sizes of approximately 5-130 μm, which are too big for drug nanocomposite applications. Hence, production of stable superdisintegrant suspensions with less than 5 μm particles is desirable. Here, we explore the preparation of colloidal suspensions of anionic and nonionic superdisintegrants using a wet stirred media mill and assess their physical stability. Sodium starch glycolate （SSG） and crospovidone （CP） were selected as representative anionic and nonionic superdisintegrants, and hydroxypropyl cellulose （HPC） and sodium dodecyl sulfate （SDS） were used as a steric stabilizer and a wetting agent/stabilizer, respectively. Particle sizing, scanning electron microscopy, and zeta potential measurements were used to characterize the suspensions. Colloidal superdisintegrant suspensions were prepared reproducibly. The extensive particle breakage was attributed to the swelling-induced softening in water. SSG suspensions were stable even in the absence of stabilizers, whereas CP suspensions required HPC-SDS for minimizing particle aggregation. These findings were explained by the higher absolute （negative） zeta potential of the suspensions of the anionic superdisintegrant （SSG） as compared with those of the nonionic superdisintegrant （CP）.

关键词： Colloidal suspensions Dispersants Physical stability Superdisintegrants Swelling Wet stirred media milling

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

利用核函数法中的自适应带宽同时对一维空间两个储集层属性参数进行粗化

引用

石油勘探与开发 2019年第4期46卷 710-715页

作者： mohammad Reza azad ABOLGHASEM Kamkar Rouhani BEHZAD Tokhmechi mohammad Arashi EHSAN Baratnezhad Shahrood University of Technology Shahrood ***Iran Tarbiat Modarres Tehran 114-14115Iran

在多孔介质流体流动模拟中,应用网格粗化方法必须在保留重要储集层参数的空间分布的前提下,首先利用大网格粗化原始地质模型(尤其是孔隙型介质),并用数值方法求解。提出了根据属性参数的空间分布、以核函数的自适应带宽为基础的网格粗... 详细信息

在多孔介质流体流动模拟中,应用网格粗化方法必须在保留重要储集层参数的空间分布的前提下,首先利用大网格粗化原始地质模型(尤其是孔隙型介质),并用数值方法求解。提出了根据属性参数的空间分布、以核函数的自适应带宽为基础的网格粗化新方法,该方法既减少了网格数量,同时也保留原始精细模型的主要非均质性特征。该方法的关键点在于可以同时对两种储集层属性参数进行网格粗化。首先计算每个储集层属性参数的带宽量或最优门槛值并得到粗化结果,然后根据最大带宽和最小带宽采用两种不同的方法对两个属性参数同时粗化。现在已经能够实现利用不同方法建立储集层两个属性参数的最终粗化模型,不同方法的网格单元数和网格位置都相同。最小带宽法的粗化误差小于最大带宽法。

关键词：储集层属性同步粗化原始模型模拟模型自适应带宽核函数

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Auto-tuning PVT data using multi-objective optimization: Application of NSGA-Ⅱ algorithm

引用

Petroleum 2024年第1期10卷 135-149页

作者： Abdolhadi Zarifi mohammad Madani mohammad Jafarzadegan Reservoir Engineering Systems Petroleum Engineering Department Main Office Building of National Iranian South Oil Company (NISOC) Combined Planning Management National Iranian Oil Company (NIOC) Reservoir Engineering Division Petroleum Engineering Department Petroleum Engineering and Development Company (PEDEC)

Reservoir simulation is known as perhaps the most widely used, accurate, and reliable method for field development in the petroleum industry. An integral part of a reliable reservoir simulation process is to consider robust and rigorous tuned EOS models. Traditionally, EOS models are tuned iteratively through arduous workflows against experimental PVT data. However, this comes with a number of drawbacks such as forcingly using weight factors, which upon alteration adversely affects the optimization *** objective of the current work is thus to introduce an auto-tune PVT matching tool using NSGA-II multi-objective optimization. In order to illustrate the robustness of the presented technique, three different PVT samples are used, including two black-oil and one gas condensate sample. We utilize PengRobinson EOS during all the manual and auto-tuning processes. Comparison of auto-tuned EOS-generated results with those of experimental and computed statistical error values for these samples clearly show that the proposed method is robust. In addition, the proposed method, contrary to the manual matching process, provides the engineer with several matched solutions, which allows them to select a match based on the engineering background to be best amenable to the problem at hand. In addition, the proposed technique is fast, and can output several solutions within less time compared to the traditional manual matching method.

关键词： Auto-tuning PVT Equation of state NSGA-II Multi-objective optimization

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Investigation of material composition,design,and performance of open-graded asphalt mixtures for semi-flexible pavement:A comprehensive experimental study

引用

Journal of Traffic and Transportation Engineering(English Edition) 2024年第1期11卷 92-116页

作者： mohammad Taghipoor Abolfazl Hassani mohammad M.Karimi Department of Civil and Environmental Engineering Tarbiat Modares UniversityTehranIran

The primary goal of this study is the design and construction of semi-flexible pavement(SFP)mixture in accordance with the engineering and mechanical *** study involves the use of a range of gradation curves,air void contents,cellulose and synthesized fibers,and neat and modified asphalt binders to prepare the open-graded asphalt(OGA)*** analyze the characteristics of these mixtures,a variety of test,namely binder drainage,semi-circular bending(SCB),Cantabro,wheel tracking,indirect tensile strength(ITS),and permeability tests were ***,to analyze the prepared grouting material,flexural strength,compressive strength,and fluidity tests were *** the final stage,SFP was compared to HMA in terms of engineering characteristics and *** to the results,SFP was more resistant to skid,rutting,fire,and moisture damage,while HMA had a better performance in fracture tests,including SCB *** to the results of the mechanical performance tests conducted on OGA mixtures,the highest and lowest values for air void content to achieve the highest mechanical performance level were 30%-35%and 25%,***,based on the laboratory results,it was determined that the required void ratio for constructing OGA mixtures was 24%-26%based on the bitumen type and fibers amount in the ***,SFP mixture can be regarded as a viable alternative to common pavements thanks to its high resistance to rutting and moisture damage,long freezing-thawing fatigue life,and adequate fire and skid resistance.

关键词： Semi-flexible pavement mixture Open-graded asphalt mixture Engineering properties Cantabro test Hot mix asphalt

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent Progress in Bionic Hydrogels for Articular Cartilage:Tribological and Mechanical Characteristics

引用

Journal of Bionic Engineering 2024年第2期21卷 653-673页

作者： mohammad Javan Almasi Dangsheng Xiong School of Materials Science and Engineering Nanjing University of Science and TechnologyNanjing210094China

Cartilage regeneration and repair are considered clinical challenges since cartilage has limited capability for *** tissue-engineered materials have the ability to repair cartilage,they have weak mechanical characteristics and cannot resist long-term *** the other hand,surgery to replace the joint is frequently done to treat significant cartilage deterioration these ***,the materials that are being used for replacement have high friction coefficients,lack shock absorption functions,and lack *** research on natural articular cartilage structure and function may lead to bionic hydrogels,which have suitable physicochemical and biological characteristics(e.g.,tribological and mechanical properties and the ability to support loadbearing capability),but need *** on their tribological and mechanical characteristics,the current review highlights the most recent advancements of bionic hydrogels used for articular cartilage,highlighting both the field's recent progress and its potential for future *** this reason,firstly,some important property improvement methods of bionic hydrogels are discussed and then,the recent findings of various research on the making of those bionic materials are provided and *** seems that by using some modifications such as product design,surface treatments,animal tests,controlling the isoelectric point of hydrogels,and computer simulation,the intended mechanical and tribological characteristics of natural articular cartilage may be attained by the bionic hydrogels.

关键词： Bionic hydrogel Articular cartilage Mechanical property Tribological property Lubrication

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Ultrasensitive plasmonic sensor based on MDM waveguide containing Persian Orsi window cavities for refractive index and blood plasma sensing

引用

Optoelectronics Letters 2024年第7期20卷 406-411页

作者： mohammad Ghanavati mohammad Azim Karami School of Electrical Engineering Iran University of Science and Technology

We developed a plasmonic refractive index（RI） with a metal-dielectric-metal（MDM） structure that utilizes two Persian Orsi windows-like separated cavities with a high figure of merit（FoM） and ultrasensitivity. The simulated and optimized Ag-air-Ag MDM sensor for surface plasmon resonance（SPR） offers high RI sensitivity（SRI） and the ability to detect blood plasma concentration（BPC）. The results verified that structural parameters have an effect on S;RI;, full width at half maximum（FWHM）, FoM, sensitivity of blood plasma（S;p;） for right and left peaks, whose values are 1 345.45 nm·RIU;-1;, 32 nm, 42.04 RIU;-1;, 0.26 and 0.19 nm·L·g;-1;, respectively. The proposed design opens a new horizon in sensor development.

关键词： A

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

The modeling non-sequential double ionization of helium atom under highintensity femtosecond laser pulses with shielding charge approximation

引用

Communications in Theoretical Physics 2024年第2期76卷 151-156页

作者： Marjan Zakavi mohammad Sabaeian Department of Physics Faculty of ScienceShahid Chamran University of AhvazIran Center for Research on Laser and Plasma Shahid Chamran University of AhvazIran

In this study,we successfully extracted the‘knee structure’for non-sequential double ionization(NSDI)in the helium *** achieve this,for the first time,we solved the time-dependent Schrödinger equation in three dimensions for the helium atom,utilizing the shielding charge *** findings corroborate prior observations by Wang et al[Wang and Eberly,***.105,083001(2010)],demonstrating that NSDI occurs within a narrower time window in circular polarization compared to linear *** a result,the yield of linear polarization was higher than that of circular polarization,aligning with the previously reported ***,in the case of circular polarization,the time window further narrows with increasing intensity,attributed to a decrease in the time-of-flight.

关键词： NSDI knee structure TDSE shielding charge helium 3D-TDSE

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Direct scaling of residual displacements for bilinear and pinching oscillators

引用

Earthquake Engineering and Engineering Vibration 2024年第1期23卷 129-149页

作者： mohammad Saifullah Vinay K.Gupta Department of Civil Engineering Indian Institute of Technology KanpurKanpur 208016India

The estimation of residual displacements in a structure due to an anticipated earthquake event has increasingly become an important component of performance-based earthquake engineering because controlling these displacements plays an important role in ensuring cost-feasible or cost-effective repairs in a damaged structure after the *** attempt is made in this study to obtain statistical estimates of constant-ductility residual displacement spectra for bilinear and pinching oscillators with 5%initial damping,directly in terms of easily available seismological,site,and model *** of the available models for the bilinear and pinching oscillators are useful when design spectra for a seismic hazard at a site are not *** statistical estimates of a residual displacement spectrum are proposed in terms of earthquake magnitude,epicentral distance,site geology parameter,and three model parameters for a given set of ductility demand and a hysteretic energy capacity coefficient in the case of bilinear and pinching models,as well as for a given set of pinching parameters for displacement and strength at the breakpoint in the case of pinching model *** proposed scaling model is applicable to horizontal ground motions in the western *** earthquake magnitudes less than 7 or epicentral distances greater than 20 km.

关键词： residual displacement spectrum bilinear hysteresis model pinching hysteresis model nonlinear analysis scaling model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Interpretable Detection of Malicious Behavior in Windows Portable Executables Using Multi-Head 2D Transformers

引用

Big Data Mining and Analytics 2024年第2期7卷 485-499页

作者： Sohail Khan mohammad Nauman Computer Science Department Effat College of EngineeringEffat UniversityJeddah 23341Kingdom of Saudi Arabia

Windows malware is becoming an increasingly pressing problem as the amount of malware continues to grow and more sensitive information is stored on *** of the major challenges in tackling this problem is the complexity of malware analysis,which requires expertise from human *** developments in machine learning have led to the creation of deep models for malware ***,these models often lack transparency,making it difficult to understand the reasoning behind the model’s decisions,otherwise known as the black-box *** address these limitations,this paper presents a novel model for malware detection,utilizing vision transformers to analyze the Operation Code(OpCode)sequences of more than 350000 Windows portable executable malware samples from real-world *** model achieves a high accuracy of 0.9864,not only surpassing the previous results but also providing valuable insights into the reasoning behind the *** model is able to pinpoint specific instructions that lead to malicious behavior in malware samples,aiding human experts in their analysis and driving further advancements in the *** report our findings and show how causality can be established between malicious code and actual classification by a deep learning model,thus opening up this black-box problem for deeper analysis.

关键词： machine learning malware vision transformers Windows Protable Executable(PE)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：