检索结果-南通市图书馆

Journal of Advanced Dielectrics 2020年第4期10卷 13-21页

作者： Nguyen Truong-Tho le dai vuong Department of Physics College of Sciences Hue UniversityHue CityVietnam Faculty of Natural Sciences Thu Dau Mot University Binh Duong Province Vietnam

Sintered lead-free Bi_(0.5)(Na_(0.8)K_(0.2)T_(0.5)(Ti0:96Sn0:04TO_(3)ceramics(BNKTS)have been fabricated via a solid-state *** effect of sintering temperature on the structural,morphological,dielectric,ferroelectric and energy storage properties of BNKTS ceramics was investigated,and it was found that the electrical properties of the synthesized ceramics increased with the increase in the sintering temperature,and the highest values were achieved at 1100℃.The ceramics sintered at the optimized temperature of 1100℃exhibited the best physical,dielectric,ferroelectric and energy storage properties,namely,high density(the relative density,ρ=5:88 ***^(-3),approximate to 96.7%of the theoretical value),high densification factor(DF=0:93),high dielectric constant(ε_(r)=1215),low dielectric loss(tanδ=0:051),highest dielectric constant(ε_(max)=4335),high remanent polarization(Pr=9:5μ***^(-2),high coercive field(E_(c)=14:3 kV/cm),high energy storage density(0.12 J/cm^(3),and high energy storage efficiency(41.7%at 46.3 kV/cm).

关键词： lead-free ceramics BNKT sintering temperature dielectric constant

Process intensification for the synthesis and purification of battery-grade Li_(2)CO_(3)with microfluidics

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第7期90卷 106-117页

作者： Haodu Li Jie Zhang Lin dai le Du Jiqin Zhu The State Key Laboratory of Chemical Resource Engineering College of Chemical EngineeringBeijing University of Chemical TechnologyBeijing 100029China

Battery-grade lithium carbonate(Li_(2)CO_(3))with a purity of higher than 99.5 wt%is of great importance as a high value-added lithium ***,influences of different reaction systems and process control on product purity remain ***,a membrane dispersion microreactor was used to enhance the mass transfer of preparation and purification processes in homogeneous and heterogeneous *** systems of Na_(2)CO_(3)–LiCl,NH_(4)HCO_(3)–LiCl,and NH_(3)·H_(2)O−CO_(2)−LiCl,CO_(2)purification based on carbonation and decomposition were *** Li_(2)CO_(3)purity was increased by the improvement of mixing *** carbonation time was reduced by 62.5%and 58.3%for the NH_(3)·H_(2)O−CO_(2)and CO_(2)purification systems,*** the two ammonia-based systems,Li_(2)CO_(3)particles with a purity of 99.7–99.8 wt%were one-step prepared with a size of 3–5μm,which also met the requirement of the battery-grade *** purity was further increased to 99.9 wt%by CO_(2)purification and LiHCO_(3)*** investigation could provide a feasible alternative for the controllable preparation of battery-grade Li_(2)CO_(3)in one or multiple steps.

关键词： Microfluidics Battery grade Li_(2)CO_(3) Process intensification High purity

Structure and Electrical Properties of Fe<sub>2</sub>O<sub>3</sub>-Doped PZT-PZN-PMnN Ceramics

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Modern Physics 2014年第14期5卷 1258-1263页

作者： le dai vuong Phan Dinh Gio Department of Physics College of Sciences Hue University Hue City Vietnam

The 0.8Pb(Zr0.48Ti0.52)O3 – 0.125Pb(Zn1/3Nb2/3)O3 – 0.075Pb(Mn1/3Nb2/3)O3 + x wt% Fe2O3 ceramics (PZT-PZN-PMnN), where x = 0 ÷?0.35, has been prepared by two-stage calcination method. The effect of Fe2O3 content on the crystal structure and electrical properties of ceramics has been investigated. The results of X-ray diffraction (XRD) show that all samples have pure perovskite phase with tetragonal structure, the c/a ratio increases with increasing Fe2O3 content. At x = 0.25, electrical properties of ceramics are best: the density (r) of 7.86 g/cm3, the electromechanical coupling factor (kp) of 0.64, the dielectric constant (εr) of 1400, the dielectric loss (tand) of 0.003, the mechanical quality factor (Qm) of 1450, the piezoelectric constant (d31) of 155 pC/N, and the remanent polarization (Pr) of 37 μC/cm2, which makes it as a promising material for high power piezoelectric devices.

关键词： Crystal Structure Dielectrics Piezoelectrics Electromechanical Coupling Factor Fe2O3 Doping

Influence of sintering behavior on the microstructure and electrical properties of BaTiO_(3) lead-free ceramics from hydrothermal synthesized precursor nanoparticles

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Advanced Dielectrics 2021年第2期11卷 42-51页

作者： Do Viet On le dai vuong Truong Van Chuong Dao Anh Quang Ho Van Tuyen Vo Thanh Tung Department of Physics College of Sciences Hue UniversityHue CityVietnam Faculty of Chemical and Environmental Engineering Hue Industrial College Hue CityVietnam Institute of Research and Development Duy Tan University Da Nang CityVietnam Faculty of Natural Sciences Duy Tan University Da Nang CityVietnam

BaTiO_(3) nanoparticles were synthesized by hydrothermal method using amorphous phase TiO_(2) precursor as the *** microstructure and phase structure were determined using XRD,SEM and Raman spectroscopy analysis *** results showed that BaTiO_(3) nanoparticles have tetragonal structure,average size of about 100 nm was obtained at Ba/Ti ratio of 1.5,synthesis temperature of 200℃ and reaction time of 12 *** components of the BaTiO_(3) lead-free ceramic system are fabricated by conventional solid-phase reaction from the average size BaTiO_(3) particles about 100 nm obtained by hydrothermal *** effects of sintering behavior on dielectric,ferroelectric and piezoelectric properties of BT high-density ceramic were *** BaTiO_(3) ceramic composition sintered at 1300℃ has a relative density of 97%,the value of the electromechanical coefficient kp=0.40,k33=0.42,the large piezoelectric coefficient d_(33)=300 pC/N,d_(31)=−125 pC/N.

关键词： BaTiO_(3)nanoparticles lead-free ceramics piezoelectric ferroelectric properties

A Skin-Inspired Self-Adaptive System for Temperature Control During Dynamic Wound Healing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro letters 2024年第8期16卷 211-224页

作者： Yaqi Geng Guoyin Chen Ran Cao Hongmei dai Zexu Hu Senlong Yu le Wang Liping Zhu Hengxue Xiang Meifang Zhu State Key Laboratory for Modification of Chemical Fibers and Polymer Materials College of Materials Science and EngineeringDonghua University2999 North Renmin RoadShanghai 201620People’s Republic of China

The thermoregulating function of skin that is capable of maintaining body temperature within a thermostatic state is ***,patients suffering from skin damage are struggling with the surrounding scene and situational ***,we report an interactive self-regulation electronic system by mimicking the human thermos-reception *** skin-inspired self-adaptive system is composed of two highly sensitive thermistors(thermal-response composite materials),and a low-power temperature control unit(Laserinduced graphene array).The biomimetic skin can realize self-adjusting in the range of 35–42℃,which is around physiological *** thermoregulation system also contributed to skin barrier formation and wound *** wound models,the treatment group healed~10%more rapidly compared with the control group,and showed reduced inflammation,thus enhancing skin tissue *** skin-inspired self-adaptive system holds substantial promise for nextgeneration robotic and medical devices.

关键词： Thermo-reception Self-regulation Flexible electronic system Wound healing

维普期刊数据库

Electrical Properties of CuO-Doped PZT-PZN-PMnN Piezoelectric Ceramics Sintered at Low Temperature

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science and Chemical Engineering 2014年第11期2卷 20-27页

作者： Phan Dinh Gio le dai vuong Ho Thi Thanh Hoa Department of Physics College of Sciences Hu&ecirc University Hu&ecirc Vietnam Faculty of Chemical and Environmental Engineering Hu&ecirc Industry College Hu&ecirc Vietnam

The 0.8Pb(Zr0.48Ti0.52)O3-0.125Pb(Zn1/3Nb2/3)O3-0.075Pb(Mn1/3Nb2/3)O3 (PZT-PZN-PMnN) + x wt% CuO piezoelectric ceramics, where x = 0.0, 0.05, 0.075, 0.10, 0.125, 0.150, and 0.175, have been fabricated by the conventional solid-state reaction method and the B-site Oxide mixing technique (BO). The effect of CuO on the sinterability, structure, and electrical properties of PZT-PZN-PMnN ceramics was systematically studied. The CuO addition significantly reduced the sintering temperature of the ceramics from 1150°C to 850°C. Experimental results showed that with the doping of CuO, all the ceramics could be well sintered and exhibit a dense, pure perovskite structure. The specimen containing 0.125 wt% CuO sintered at 850°C showed the good electrical properties: the density of 7.91 g/cm3;the electromechanical coupling factor, kp = 0.55 and kt = 0.46;the dielectric constant, ε = 1179;the dielectric loss (tand) of 0.006;the mechanical quality factor (Qm) of 1174;the piezoelectric constant (d31) of 112 pC/N.

关键词： Crystal Structure Dielectric Piezoelectric Constant Mechanical Quality Factor

Seismic performance evaluation of water supply pipes installed in a full-scale RC frame structure based on a shaking table test

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第1期23卷 163-178页

作者： Wu Houli Guo Endong Wang Jingyi dai Xin dai Chenxi Key Laboratory of Earthquake Engineering and Engineering Vibration Institute of Engineering MechanicsChina Earthquake AdministrationHarbin 150080China Key Laboratory of Earthquake Disaster Mitigation Ministry of Emergency ManagementHarbin 150080China

As an important part of nonstructural components,the seismic response of indoor water supply pipes deserves much *** paper presents shaking table test research on water supply pipes installed in a full-scale reinforced concrete(RC)frame *** material pipes and different methods for penetrating the reinforced concrete floors are combined to evaluate the difference in seismic *** response spectra and pipe acceleration amplification factors based on test data are discussed and compared with code provisions.A seismic fragility study of displacement demand is conducted based on numerical *** acceleration response and displacement response of different combinations are *** results show that the combination of different pipe materials and different passing-through methods can cause obvious differences in the seismic response of indoor riser pipes.

关键词： water supply pipe different materials shaking table test amplification factor seismic fragility

维普期刊数据库

Near-field wideband beam training for ELAA with uniform circular array

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第6期67卷 370-383页

作者： Yuhao CHEN Linglong dai Department of Electronic Engineering Tsinghua UniversityBeijing National Research Center for Information Science and Technology (BNRist)

Extremely large-scale antenna array(ELAA) at millimeter wave(mmWave) and Terahertz(THz)band has been considered a key technology for combating high attenuation in high-frequency bands in future6G communications. Uniform circular arrays(UCAs) have attracted much attention because of their ability to provide flat beamforming gain at all angles. To realize efficient beamforming, beam training is widely used to acquire channel state information. However, with a large antenna number, the beam training overhead in ELAA systems becomes overwhelming. Moreover, with a large bandwidth, the beam defocus effect severely degrades beam training accuracy. To address these issues, this paper proposes a frequency-dependent focusing(FDF)-based beam training scheme to realize effective beam training in near-field wideband ELAA systems with UCA. Specifically, we first analyze the FDF property of UCA, where signals at different subcarriers can simultaneously focus on different distances. Then, by exploiting the FDF property to search different distances using different subcarriers simultaneously, we design a hierarchical codebook and propose an FDFbased beam training scheme. To reveal the effectiveness of the proposed scheme, we compare its necessary beam training overhead with that of existing schemes. Finally, the simulation results demonstrate that the proposed scheme can achieve accurate beam training in near-field wideband UCA systems with a low beam training overhead.

关键词： extremely large-scale antenna array (ELAA) uniform circular array (UCA) near-field wideband beam training

同方期刊数据库

Biohythane production from two-stage anaerobic digestion of food waste:A review

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第5期139卷 334-349页

作者： Xiaona An Ying Xu Xiaohu dai State Key Laboratory of Pollution Control and Resource Reuse School of Environmental Science and EngineeringTongji UniversityShanghai 200092China Shanghai Institute of Pollution Control and Ecological Security Shanghai 200092China

The biotransformation of food waste(FW)to bioenergy has attracted considerable research attention as a means to address the energy crisis and waste disposal *** this end,a promising technique is two-stage anaerobic digestion(TSAD),in which the FW is transformed to biohythane,a gaseous mixture of biomethane and *** review summarises the main characteristics of FW and describes the basic principle of ***,the factors influencing the TSAD performance are identified,and an overview of the research status;economic aspects;and strategies such as pre-treatment,co-digestion,and regulation of microbial consortia to increase the biohythane yield from TSAD is ***,the challenges and future considerations associated with the treatment of FW by TSAD are *** paper can provide valuable reference for the improvement and widespread implementation of TSAD-based FW treatment.

关键词： Two-stage anaerobic digestion(TSAD) Food waste(FW) Methane production Hydrogen production

维普期刊数据库

State of the art of lightweight aggregates used in lightweight refractories for working lining of high-temperature furnaces

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第6期31卷 1320-1343页

作者： Wei Zhang Wen-yong dai Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016LiaoningChina Research and Development Department AGC Plibrico(Dalian)Industries Inc.Dalian 116600LiaoningChina

Lightweight refractories for the working lining of high-temperature furnaces play an important role in the smelting of advanced steels and *** prepare lightweight refractories for the working lining of high-temperature furnaces,the synthesis of lightweight aggregates is the ***,the research on the synthesis of lightweight aggregates with high service temperature,low thermal conductivity,high strength,and good slag resistance has received widespread *** available literature on the synthesis of lightweight aggregates was summarized,including corundum,mullite,mullite-corundum,spinel,corundum-spinel,cordierite,cordierite-mullite,calcium hexaluminate,corundum-calcium hexaluminate,bauxite,magnesia,magnesia-based,and forsterite-based ***,the future development trend of lightweight aggregates was proposed.

关键词： Lightweight aggregate Lightweight refractory Working lining Apparent porosity Closed porosity Thermal conductivity Pore-forming approach