检索结果-南通市图书馆

Simple method for extracting the seasonal signals of photochemical reflectance index and normalized difference vegetation index measured using a spectral reflectance sensor

引用

Journal of Integrative Agriculture 2021年第7期20卷 1969-1986页

作者： jae-hyun ryu Dohyeok OH jaeil CHO Department of Applied Plant Science Chonnam National UniversityGwangju 61186Republic of Korea

A spectral reflectance sensor(SRS)fixed on the near-surface ground was developed to support the continuous monitoring of vegetation indices such as the normalized difference vegetation index(NDVI)and photochemical reflectance index(PRI).NDVI is useful for indicating crop growth/phenology,whereas PRI was developed for observing physiological ***,the seasonal change patterns of NDVI and PRI are two valuable pieces of information in a crop-monitoring ***,capturing the seasonal patterns is considered challenging because the vegetation index values estimated by the reflection from vegetation are often governed by meteorological conditions,such as solar irradiance and ***,unlike growth/phenology,the physiological condition has diurnal changes as well as seasonal *** study proposed a novel filtering method for extracting the seasonal signals of SRS-based NDVI and PRI in paddy rice,barley,and ***,the measurement accuracy of SRSs was compared with handheld spectrometers,and the R^(2)values between the two devices were 0.96 and 0.81 for NDVI and PRI,***,the experimental study of threshold criteria with respect to meteorological variables(i.e.,insolation,cloudiness,sunshine duration,and precipitation)was conducted,and sunshine duration was the most useful one for excluding distorted values of the vegetation *** data processing based on sunshine duration,the R^(2)values between the measured vegetation indices and the extracted seasonal signals of vegetation indices increased by approximately 0.002–0.004(NDVI)and 0.065–0.298(PRI)on the three crops,and the seasonal signals of vegetation indices became noticeably *** method will contribute to an agricultural monitoring system by identifying the seasonal changes in crop growth and physiological conditions.

关键词： photochemical reflectance index normalized difference vegetation index vegetation remote sensing spectral reflectance sensor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Prolonged and highly efficient intracellular extraction of photosynthetic electrons from single algal cells by optimized nanoelectrode insertion

引用

Nano Research 2018年第1期11卷 397-409页

作者： Hyeonaug Hong Yong jae Kim Myungjin Han Gu YOO hyun Woo Song Youngcheol Chae jae-Chul Pyun Arthur R. Grossman WonHyoung ryu Department of Mechanical Engineering Yonsei University Seou103722 Republic of Korea Yonsei Institute of Convergence Technology and school of In tegrated Technology Yonsei University Incheon 21983 Republic of Korea Department of Materials Science & Engineering Yonsei University Seou103722 Republic of Korea Department of Electrical & Electronic Engineering Yonsei University Seou103722 Republic of Korea Deportment of Plant Biology Carnegie Institution for Science Department of Biology Stanford University Stanford CA 94305 USA

Harvesting photosynthetic electrons （PEs） from plant or algal cells can be a highly efficient and environmentally friendly way of generating renewable energy. Recent work on nanoelectrode insertion into algal cells has demonstrated the possibility to directly extract PEs from living algal cells with high efficiencies. However, the instability of the inserted cells limits the practicality of this technology. Here, the impact of nanoelectrode insertion on intracellular extraction of PEs is characterized with the goal of stabilizing algal cells after nanoelectrode insertion. Using nanoelectrodes 〈 500 nm in diameter, algal cells remained stable for over one week after insertion and continued to provide PEs through direct extraction by the inserted nanoelectrodes. After nanoelectrode insertion, a photosynthetic current density of 6 ***-2, which is several fold higher than the current densities attained using approaches based on isolated thylakoid membranes or photosystem I complexes, was observed in the dark and during illumination at various light intensities.

关键词： bio-solar energy photosynthetic electrons algal cells nanoelectrode cell insertion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Mo and Ta addition in NbTiZr medium entropy alloy to overcome tensile yield strength-ductility trade-off

引用

Journal of Materials Science & Technology 2022年第14期109卷 176-185页

作者： Muhammad Akmal hyun Woo Seong Ho Jin ryu Department of Materials Science and Engineering KAISTDaejeonYuseong-gu 34141South Korea Department of Nuclear and Quantum Engineering KAISTDaejeonYuseong-gu 34141South Korea

In this study,single-phase NbTiZr and NbTiZr(MoTa)_(0.1) medium-entropy alloys(MEAs)were investigated for their use in biomedical *** alloys were prepared by arc melting,and were then cold-rolled,annealed,and characterized in terms of phase analysis,mechanical properties,fractography,and wear *** alloys showed a single body-centered cubic phase with superior mechanical,and tribological properties compared to commercially available biomedical *** and Ta-containing MEAs showed higher tensile yield strength(1060±18 MPa)and higher tensile ductility(~20%),thus overcoming the strength-ductility trade-off with no signs of transformation-induced plasticity,twinning,or *** generalized stacking fault energy(GSFE)calculations on the{112}slip system by the first-principles calculations based on density functional theory showed that the addition of less than0.2 molar fraction of Mo and Ta lowers the GSFE *** behavior posits the increase in ductility of the alloy by facilitating slips although strength is also increased by solid solution *** wear resistance of both alloys against hardened steel surfaces was superior to that of commercial biomedical ***,we concluded that NbTiZr(MoTa)_(0.1)MEA with good tensile ductility is a potential candidate for biomedical implants.

关键词： Medium-entropy alloys Wear-resistant Biomedical implants Solid solution hardening Staking fault energy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Practical considerations of Si-based anodes for lithiumion battery applications

引用

Nano Research 2017年第12期10卷 3970-4002页

作者： jaegeon ryu Dongki Hong hyun-Wook Lee Soojin Park Department of Energy Engineering School of Energy and Chemical Engineering Ulsan National Institute of Science and Technology (UNIST) Ulsan 44919 Republic of Korea

Using Si-based anodes in Li-ion batteries is one of the most feasible approaches to achieve high energy densities despite their disadvantages, such as low conductivity and massive volume expansion, which cause unstable solid electrolyte interphase layers with mechanical failure. The forefront in research and development to address the above challenges suggests the possibility of fully commercially viable cells using various structural and interfacial modifications. In particular, we present a discussion of each dimension of Si-based anodes in multiple controlled systems, including plain, hollow, porous, and uniquely engineered structures, which are further evaluated based on their anode performances, such as initial reversibility, capacity retention for extended cycles with its efficiency, degree of volume expansion tolerance, and rate capabilities, by several practical standards in half cells. With these practical considerations, multi-dimensional structures with uniform size distributions （micrometers, on average） are strongly desired to satisfy the rigorous requirements for widespread applications. Furthermore, we closely examined several full cells composed of Si-based multicomponent anodes coupled with suitable cathodes based on practical standards to propose future research directions for Si-based anodes to keep pace with the rapidly changing market demands for diverse energy storage systems.

关键词： silicon anode dimensional control full celllithium-ion batteries practicality

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Flexible highly-effective energy harvester via crystallographic and computational control of nanointerfacial morphotropic piezoelectric thin film

引用

Nano Research 2017年第2期10卷 437-455页

作者： Chang Kyu Jeong Sung Beom Cho jae hyun Han Dae Yong Park Suyoung Yang Kwi-II Park Jungho ryu Hoon Sohn Yong-Chae Chung Keon jae Lee Department of Materials Science and Engineering Korea Advanced Institute of Science and Technology (KAIST) 291 Daehak-ro Yuseong-gu Daejeon 34141 Republic of Korea KAISTInstitute for the NanoCentury (KINC) 291 Daehak-ro Yuseong-gu Daejeon 34141 Republic of Korea Division of Materials Science and Engineering Hanyang University 222 Wangsimni-ro Seongdong-gu Seou104763 Republic of Korea Department of Civil and Environmental Engineering KAIST 291 Daehak-ro Yuseong-gu Daejeon 34141 Republic of Korea Department of Energy Engineering Gyeongnam National University of Science and Technology 33 Dongjin-ro Jinju Gyeongnam 52725 Republic of Korea Functional Ceramic Group Korea Institute of Materials Science (KIMS) 797 Changwon-daero Seongsan-gu Changwon Gyeongnam.51508 Republic of Korea

Controlling the properties of piezoelectric thin films is a key aspect for designing highly efficient flexible electromechanical devices. In this stud）~ the crystallographic phenomena of PbZr1-xTixO3 （PZT） thin films caused by distinguished interfacial effects are deeply investigated by overlooking views, including not only an experimental demonstration but also ab initio modeling. The polymorphic phase balance and crystallinity, as well as the crystal orientation of PZT thin films at the morphotropic phase boundary （MPB）, can be stably modulated using interfacial crystal structures. Here, interactions with MgO stabilize the PZT crystallographic system well and induce the texturing influences, while the PZT film remains quasi-stable on a conventional A1203 wafer. On the basis of this fundamental understanding, a high-output flexible energy harvester is developed using the controlled-PZT system, which shows significantly higher performance than the unmodified PZT generator. The voltage, current, and power densities are improved by 556%, 503%, and 822%, respectively, in comparison with the previous flexional single-crystalline piezoelectric device. Finally, the improved flexible generator is applied to harvest tiny vibrational energy from a real traffic system, and it is used to operate a commercial electronic unit. These results clearly indicate that atomic-scale designs can produce significant impacts on macroscopic applications.

关键词： energy harvesting morphotropic phaseboundary (MPB) piezoelectric first-principles calculation lead zirconium titanate(PZT)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Counter-balancing effects of Si on C partitioning and stacking fault energy of austenite in 10Mn quenching and partitioning steel

引用

Journal of Materials Science & Technology 2022年第3期98卷 248-257页

作者： Dong Hwi Kim Jee-hyun Kang Hojun Gwon Joo hyun ryu Sung-Joon Kim Graduate Institute for Ferrous Technology Pohang University of Science and TechnologyPohang 37673Republic of Korea School of Materials Science and Engineering Institute of Materials TechnologyYeungnam UniversityGyeongsan 38541Republic of Korea POSCO Technical Research Laboratories POSCOGwangyang 57807Republic of Korea

Silicon is an essential alloying element in quenching and partitioning(Q&P)steels,because it is known to suppress carbide precipitation during partitioning step and promote carbon partitioning to stabilize *** 2 wt%Si was added to 10Mn-2Al-0.2C steel,the size and fraction of the carbides formed during partitioning became smaller than in the Si-free ***,the suppression of carbide formation promoted C partitioning into austenite as ***,austenite stability was always lower with Si under the equivalent partitioning condition because Si effectively decreased the stacking fault energy of *** partitioning progressed,the both yield and tensile strengths of the Si-added steel exceeded that of the Si-free steel with the similar ductility *** was because Si was an effective solid solution strengthener,and the austenite in the Si-added steel exhibited the appropriate stability to gradually transform into martensite throughout the *** resulting strengthening effect compensated for the softening caused by martensite ***,strain hardening rate decreased continuously throughout deformation,which resulted in high tensile strength and ductility.

关键词： Steels Q&P steel Silicon Austenite stability Tensile deformation Stacking fault energy Medium Mn steel

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Endoscopic bilateral stent-in-stent placement for malignant hilar obstruction using a large cell type stent

引用

Hepatobiliary & Pancreatic Diseases International 2016年第6期15卷 633-639页

作者： Jin Myung Park Sang Hyub Lee Kwang hyun Chung Dong Kee Jang Ji Kon ryu Yong-Tae Kim jae Min Lee Woo hyun Paik Department of Internal Medicine and Liver Research Institute Seoul National University HospitalSeoul National University College of Medicine Department of Internal Medicine Kangwon National University HospitalKangwon National University School of Medicine Department of Internal Medicine Gyeongsang National University HospitalGyeongsang National University College of Medicine Department of Internal Medicine Inje University Ilsan Paik Hospital

BACKGROUND： Bilateral stent-in-stent （SIS） self-expandable metal stent placement is technically chghallenging for palliation of unresectable malignant hilar obstruction. In the SIS technique, the uniform large cell type biliary stent facilitates contralateral stent deployment through the mesh of the first metallic stent. This study aimed to assess the technical success and clinical effectiveness of this technique with a uniform large cell type biliary stent. METHODS： Thirty-one patients who underwentlbilateral SIS placement using a large cell type stent were reviewed retrospectively. All patients showed malignant hilarl obstruction （Bismuth types Ⅱ, Ⅲ, Ⅳ） with different etiologies. RESULTS： Sixteen （51.6%） patients were male. The mean age of the patients was 67.0±14.0 years. Most patients were diagnosed as having hilar cholangiocarcinoma （58.1%） and gallbladder cancer （29.0%）. Technical success rate was 83.9%. Success was achieved more frequently in patients without masses obstructing the biliary confluence （MOC） than those with MOC （95.2% vs 60.0%, P=0.03）. Functional success rate was 77.4%. Complications occurred in 29.0% of the patients. These tended to occur more frequently in patients with MOC （50.0% vs 19.0%, P=0.11）. Median time to recurrent biliary obstruction was 188 days and median survival was 175 days. CONCLUSIONS： The large cell type stent can be used efficiently for bilateral SIS placement in malignant hilar obstruction. However, the risk of technical failure increases in patients with MOC, and caution is needed to prevent complications for these patients.

关键词： biliary tract disease cholangiocarcinoma endoscopic biliary drainage stent insertion

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Adhesive ginsenoside compound K patches for cartilage tissue regeneration

引用

Regenerative Biomaterials 2023年第1期10卷 1442-1450页

作者： Jun-Ho Yang hyun Ho Shin Donghyeon Kim Ji hyun ryu Eun-Jung Jin Department of Biological Sciences College of Health SciencesWonkwang UniversityIksanJeonbuk 54538South Korea Department of Chemical Engineering Wonkwang UniversityIksanJeonbuk 54538South Korea Department of Carbon Convergence Engineering Wonkwang UniversityIksanJeonbuk 54538South Korea Integrated Omics Institute Wonkwang UniversityIksanJeonbuk 54538South Korea

Biomaterial-based drug delivery systems have been developed to expedite cartilage regeneration;however,challenges related to drug recovery,validation,and efficient drug delivery *** instance,compound K(CK)is a major metabolite of ginsenosides that is known to protect against joint degeneration by inhibiting the production of inflammatory cytokines and the activation of immune ***,its effects on cartilage degradation and tissue regeneration remain ***,tissue-adhesive drug delivery depots that stably adhere to cartilage defects are required for CK *** this study,CK-loaded adhesive patches were reported to seal cartilage defects and deliver CK to defect sites,preventing cartilage degradation and accelerating cartilage tissue *** patches are stable and suitable for application in surgical procedures under physiological conditions and show excellent adhesiveness to cartilage *** addition,there were no significant differences in the adhesive polymeric networks before and after CK ***-loaded hydrocaffeic acid-conjugated chitosan patches significantly inhibited the stimulation of cartilage-degrading enzymes and apoptosis in osteoarthritic cartilage by releasing CK in cartilage ***,the NFkB signaling pathway of released CK from the adhesive patches in the treatment of osteoarthritis is ***,the CK-loaded adhesive patches are expected to significantly contribute to cartilage regeneration.

关键词： ginsenoside compound K adhesive patch drug delivery hydrocaffeic acid-conjugated chitosan osteoarthritis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rapid species identification of pathogenic bacteria from a minute quantity exploiting three-dimensional quantitative phase imaging and artificial neural network

引用

Light(Science & Applications) 2022年第7期11卷 1595-1606页

作者： Geon Kim Daewoong Ahn Minhee Kang Jinho Park DongHun ryu YoungJu Jo Jinyeop Song Jea Sung ryu Gunho Choi hyun Jung Chung Kyuseok Kim Doo Ryeon Chung In Young Yoo Hee jae Huh hyun-seok Min Nam Yong Lee YongKeun Park Department of Physics Korea Advanced Institute of Science and TechnologyDaejeon 34141Republic of Korea KAIST Institute for Health Science and Technology KAISTDaejeon 34141Republic of Korea Tomocube Inc. Daejeon 34109Republic of Korea Smart Healthcare&Device Research Center Samsung Medical CenterSungkyunkwan University School of MedicineSeoul 06351Republic of Korea Graduate School of Nanoscience and Technology Korea Advanced Institute of Science and TechnologyDaejeon 34141Republic of Korea Department of Biological Sciences Korea Advanced Institute of Science and TechnologyDaejeon 34141Republic of Korea Department of Emergency Medicine Bundang CHA HospitalSeongnam-siGyeonggi-Do 13496Korea Division of Infectious Diseases Department of Internal MedicineSamsung Medical CenterSungkyunkwan University School of MedicineSeoul 06351Republic of Korea Department of Laboratory Medicine Seoul St.Mary's HospitalCollege of MedicineThe Catholic University of KoreaSeoul 06591Republic of Korea Department of Laboratory Medicine and Genetics Samsung Medical CenterSungkyunkwan University School of MedicineSeoul 06351Republic of Korea Department of Applied Physics Stanford UniversityStanfordCA 94305USA Department of Physics Massachusetts Institute of TechnologyCambridgeMA 02139USA

The healthcare industry is in dire need of rapid microbial identification techniques for treating microbial *** infections are a major healthcare issue worldwide,as these widespread diseases often develop into deadly *** studies have shown that an early appropriate antibiotic treatment significantly reduces the mortality of an infection,this effective treatment is difficult to *** main obstacle to early appropriate antibiotic treatments is the long turnaround time of the routine microbial identification,which includes time-consuming sample ***,we propose a microscopy-based framework that identifies the pathogen from single to few *** framework obtains and exploits the morphology of the limited sample by incorporating three-dimensional quantitative phase imaging and an artificial neural *** demonstrate the identification of 19 bacterial species that cause bloodstream infections,achieving an accuracy of 82.5%from an individual bacterial cell or *** performance,comparable to that of the gold standard mass spectroscopy under a sufficient amount of sample,underpins the effectiveness of our framework in clinical ***,our accuracy increases with multiple measurements,reaching 99.9%with seven different measurements of cells or *** believe that our framework can serve as a beneficial advisory tool for clinicians during the initial treatment of infections.

关键词： artificial neural exploit

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Adaptive Electrospinning System Based on Reinforcement Learning for Uniform‑Thickness Nanofiber Air Filters

引用

Advanced Fiber Materials 2023年第2期5卷 617-631页

作者： Seok Hyeon Hwang Jin Yeong Song hyun Il ryu jae Hee Oh Seungwook Lee Donggeun Lee Dong Yong Park Sang Min Park School of Mechanical Engineering Pusan National University63‑2 Busan University‑roGeumjeong‑guBusan 46241South Korea Smart Manufacturing Technology R&D Group Korea Institute of Industrial Technology320 Techno Sunhwan‑roYuga‑eupDalseong‑gunDaegu 42994Republic of Korea

Electrospinning is a simple and versatile method to produce nanofiber ***,owing to bending instability that occurs during the electrospinning process,electrospinning has frequently produced a non-uniform-thickness nanofiber filter,which deteriorates its air ***,an adaptive electrospinning system based on reinforcement learning(E-RL)was developed to produce uniform-thickness nanofiber *** E-RL accomplished a real-time thickness measurement of an electrospun nanofiber filter by measuring the transmitted light through the nanofiber filter using a camera placed at the bottom of the collector and converting it into thickness using the Beer–Lambert *** on the measured thickness,the E-RL detected the non-uniformity of the nanofiber filter thickness and manipulated the movable collector to alleviate the non-uniformity of the thickness by a pre-trained reinforcement learning(RL)*** the training of the RL algo-rithm,the nanofiber production simulation software based on the empirical model of the deposition of the nanofiber filter was developed,and the training process of the RL algorithm was repeated until the optimal policy was *** the training process with the simulation software,the trained model was transferred to the adaptive electrospinning *** the movement of the collector under the optimal strategy of RL algorithm,the non-uniformity of such nanofiber filters was significantly reduced by approximately five times in standard deviation and error for both simulation and *** finding has great potential in improving the reliability of electrospinning process and nanofiber filters used in research and industrial fields such as environment,energy,and biomedicine.

关键词： Electrospinning Nanofiber filter Uniform thickness Reinforcement learning Deep Q-network

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：