检索结果-南通市图书馆

Implementation of tactical maneuvers with maneuver libraries

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2020年第1期33卷 255-270页

作者： Do hyeon LEE chang-joo kim Sung wook HUR Seong han LEE School of Aerospace Information Engineering Konkuk UniversitySeoul 05029Republic of Korea

This study creates and combines the general maneuver libraries for fixed-wing aircraft to implement tactical ***,the generalized maneuver libraries are established by analyzing the characteristics of tactical maneuvers required in *** 7th order polynomial is applied to both the creation of the maneuver libraries and the generation of the trajectories or flight paths for modal *** track the desired trajectory,we design the Attitude Command Attitude Hold(ACAH)system and the Rate Command Rate Hold(RCRH)system using Model Following Controller(MFC).Moreover,the Line-of-Sight(LOS)guidance law is *** particular,the CONDUIT~?is employed to optimize the gains so that the control systems meet the aircraft Handling Qualities(HQ)***,flight simulations are performed for the longitudinal loop,immelmann-turn,and climb-slalom-descent maneuvers to verify that tactical aggressive maneuvers are realizable via the combination of maneuver *** study can contribute to the development of flight techniques for aircraft tactical maneuvers and to the revision of air force operational manuals.

关键词： 7th order polynomial Attitude command attitude hold system Handling qualities Maneuver libraries Rate command rate hold system Tactical maneuvers

Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2016年第1期29卷 53-65页

作者： chang-joo kim Soo Hyung Park Sang Kyung Sung Sung-Nam Jung Department of Aerospace Information Engineering Konkuk UniversitySeoul 05029Republic of Korea

Applications of a novel curve-fitting technique are presented to efficiently predict the motion of the vortex filament, which is trailed from a rigid body such as wings and rotors. The gov- erning equations of the motion, when a Lagrangian approach with the present curve-fitting method is applied, can be transformed into an easily solvable form of the system of nonlinear ordinary dif- ferential equations. The applicability of Bezier curves, B-spline, and Lagrange interpolating polyno- mials is investigated. Local Lagrange interpolating polynomials with a shift operator are proposed as the best selection for applications, since it provides superior system characteristics with minimum computing time, compared to other methods. In addition, the Gauss quadrature formula with local refinement strategy has been developed for an accurate prediction of the induced velocity computed with the line integration of the Biot-Savart law. Rotary-wing problems including a vortex ring problem are analyzed to show the efficiency, accuracy, and flexibility in the applications of the pro- posed method.

关键词： Aerodynamics Biot-Savart law Curve-fitting method Free-vortex wake Rotary wing Vortex filament

Stable immobilization of lithium polysulfides using three-dimensional ordered mesoporous Mn_(2)O_(3) as the host material in lithium-sulfur batteries

在线全文

学校读者我要写书评

暂无评论

Carbon Energy 2024年第6期6卷 99-112页

作者： Sung joon Park Yun Jeong Choi Hyun-seung kim Min joo Hong Hongjun chang Janghyuk Moon Young-Jun kim Junyoung Mun Ki Jae kim Department of Energy Science Sungkyunkwan UniversitySuwonGyeonggi-doRepublic of Korea Department of Energy Engineering Konkuk UniversitySeoulRepublic of Korea Advanced Batteries Research Center Korea Electronic Technology InstituteSeongnamRepublic of Korea Department of Future Energy Engineering Sungkyunkwan UniversitySuwonRepublic of Korea Department of Energy Systems Engineering Chung-Ang UniversitySeoulRepublic of Korea SKKU Advanced Institute of Nanotechnology Sungkyunkwan UniversitySuwonGyeonggi-doRepublic of Korea SKKU Institute of Energy Science and Technology(SIEST) Sungkyunkwan UniversitySuwonRepublic of Korea School of Advanced Materials Science and Engineering Sungkyunkwan UniversitySuwonRepublic of Korea

Lithium-sulfur batteries(LSBs)have drawn significant attention owing to their high theoretical discharge capacity and energy ***,the dissolution of long-chain polysulfides into the electrolyte during the charge and discharge process(“shuttle effect”)results in fast capacity fading and inferior electrochemical *** this study,Mn_(2)O_(3)with an ordered mesoporous structure(OM-Mn_(2)O_(3))was designed as a cathode host for LSBs via KIT-6 hard templating,to effectively inhibit the polysulfide shuttle ***-Mn_(2)O_(3)offers numerous pores to confine sulfur and tightly anchor the dissolved polysulfides through the combined effects of strong polar-polar interactions,polysulfides,and sulfur chain *** OM-Mn_(2)O_(3)/S composite electrode delivered a discharge capacity of 561 mAh g^(-1) after 250 cycles at 0.5 C owing to the excellent performance of OM-Mn_(2)O_(3).Furthermore,it retained a discharge capacity of 628mA h g^(-1) even at a rate of 2 C,which was significantly higher than that of a pristine sulfur electrode(206mA h g^(-1)).These findings provide a prospective strategy for designing cathode materials for high-performance LSBs.

关键词： host material lithium-sulfur battery ordered mesoporous structure shuttle effect transition-metal oxides

Soleus arthrogenic muscle inhibition following acute lateral ankle sprain correlates with symptoms and ankle disability but not with postural control

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Sport and Health Science 2024年第4期13卷 559-568,F0003页

作者： Kyung-Min kim joo-Sung kim Alan R.Needle Department of Sport Science Sungkyunkwan UniversitySuwon-si 16419Republic of Korea Department of Health and Human Performance Texas State UniversitySan MarcosTX 78666USA Department of Public Health&Exercise Science Appalachian State UniversityBooneNC 28608USA Department of Rehabilitation Science Appalachian State UniversityBooneNC 28608USA

Background:Acute lateral ankle sprains(ALAS)are associated with long-term impairments and instability tied to altered neural *** muscle inhibition(AMI)has been observed in this population;however,relationships with injury-related impairments are unclear,potentially due to the resting,prone position in which AMI is typically *** AMI during bipedal stance may provide a better understanding of this ***:AMI was assessed in 38 young adults(19 ALAS within 72 h of injury:10 males,21.4±2.7 years;19 healthy controls:10 males,21.9±2.2 years;mean±SD)using the Hoffmann reflex(H-reflex)during bipedal *** stimulation was administered to identify the _(max)imal H-reflex(H_(max))and _(max)imal motor response(M_(max))from the soleus,fibularis longus,and tibialis anterior *** primary outcome measure was the H_(max)/M_(max) *** outcomes included acute symptoms(pain and swelling),postural control during bipedal stance,and self-reported ***:No significant group-by-limb interactions were observed for any ***,a significant group main effect was observed in the soleus muscle(F(1,35)=6.82,p=0.013),indicating significantly lower H_(max)/M_(max) ratios following ALAS(0.38±0.20)compared to healthy controls(0.53±0.16).Furthermore,lower H_(max)/M_(max) ratios in the soleus significantly correlated with acute symptoms and self-reported function but not with postural ***:This study supports previous evidence of AMI in patients with ALAS,providing insight into neurophysiologic impacts of musculoskeletal *** results suggest that assessing AMI in a standing position following acute injury may provide valuable insight into how AMI develops and guide potential therapeutic options to curb and offset the formation of joint instability.

关键词： Acute injuries Balance Hoffmann reflex Neural excitability Patient-reported outcomes

Evolution of nonmetallic inclusions in 80-t 9CrMoCoB large-scale ingots during electroslag remelting process

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1525-1539页

作者： Shengchao Duan Min joo Lee Yao Su Wangzhong Mu Dong Soo kim joo Hyun Park School of Mechanical and Materials Engineering North China University of TechnologyBeijing 100144China Department of Materials Science and Chemical Engineering Hanyang UniversityAnsan 15588Rep.of Korea Department of Materials Science and Engineering KTH Royal Institute of TechnologyBrinellvägen 23Stockholm 10044Sweden Department of Engineering Science and Mathematics Division of Materials ScienceLuleåUniversity of Technology97187 LuleåSweden Casting&Forging Business Unit Nuclear Business GroupDoosan EnerbilityChangwon 51711Rep.of Korea

In combination with theoretical calculations,experiments were conducted to investigate the evolution behavior of nonmetallic inclusions(NMIs)during the manufacture of large-scale heat-resistant steel ingots using 9CrMoCoB heat-resistant steel and CaF_(2)–CaO–Al_(2)O_(3)–SiO_(2)–B_(2)O_(3)electroslag remelting(ESR)-type slag in an 80-t industrial ESR *** main types of NMI in the consumable electrode comprised pure alumina,a multiphase oxide consisting of an Al_(2)O_(3)core and liquid CaO–Al_(2)O_(3)–SiO_(2)–MnO shell,and M_(23)C_(6)carbides with an MnS *** Al_(2)O_(3)and MnS inclusions had higher precipitation temperatures than the M_(23)C_(6)-type carbide under equilibrium and nonequilibrium solidification ***,inclusions can act as nucleation sites for carbide layer *** ESR process completely removed the liquid CaO–Al_(2)O_(3)–SiO_(2)–MnO oxide and MnS inclusion with a carbide shell,and only the Al_(2)O_(3)inclusions and Al_(2)O_(3)core with a carbide shell occupied the remelted *** M_(23)C_(6)-type carbides in steel were determined as Cr_(23)C_(6)based on the analysis of transmission electron microscopy *** substitution of Cr with W,Fe,or/and Mo in the Cr_(23)C_(6)lattice caused slight changes in the lattice parameter of the Cr_(23)C_(6)***,Cr_(21.34)Fe_(1.66)C_(6),(Cr_(19)W_(4)C_(6),Cr_(18.4)Mo_(4.6)C_(6),and Cr_(16)Fe_(5)Mo_(2)C_(6)can match the fraction pattern of Cr_(23)C_(6)*** Al_(2)O_(3)inclusions in the remelted ingot formed due to the reduction of CaO,SiO_(2),and MnO components in the liquid *** increased Al content in liquid steel or the higher supersaturation degree of Al_(2)O_(3)precipitation in the remelted ingot than that in the electrode can be attributed to the evaporation of CaF_(2)and the increase in CaO content in the ESR-type slag.

关键词： nonmetallic inclusion heat-resistant steel electroslag remelting M_(23)C_(6) carbide MnS inclusion supersaturation degree

Programmable directional color dynamics using plasmonics

在线全文

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2024年第1期10卷 325-334页

作者： Gyurin kim Doeun kim Soeun Ko Jang-Hwan Han Juhwan kim joo Hwan Ko Young Min Song Hyeon-Ho Jeong School of Electrical Engineering and Computer Science Gwangju Institute of Science and TechnologyGwangju 61005Republic of Korea Department of Semiconductor Engineering Gwangju Institute of Science and TechnologyGwangju 61005Republic of Korea Artificial Intelligence(AI)Graduate School Gwangju Institute of Science and TechnologyGwangju 61005Republic of Korea

Adaptive multicolor filters have emerged as key components for ensuring color accuracy and resolution in outdoor visual ***,the current state of this technology is still in its infancy and largely reliant on liquid crystal devices that require high voltage and bulky structural ***,we present a multicolor nanofilter consisting of multilayered‘active’plasmonic nanocomposites,wherein metallic nanoparticles are embedded within a conductive polymer *** nanocomposites are fabricated with a total thickness below 100 nm using a‘lithography-free’method at the wafer level,and they inherently exhibit three prominent optical modes,accompanying scattering phenomena that produce distinct dichroic reflection and transmission ***,a pivotal achievement is that all these colors are electrically manipulated with an applied external voltage of less than 1 V with 3.5 s of switching speed,encompassing the entire visible ***,this electrically programmable multicolor function enables the effective and dynamic modulation of the color temperature of white light across the warm-to-cool spectrum(3250 K-6250 K).This transformative capability is exceptionally valuable for enhancing the performance of outdoor optical devices that are independent of factors such as the sun’s elevation and prevailing weather conditions.

关键词： directional prevailing exceptional

A comprehensive review on the resynthesis of ternary cathode active materials from the leachate of Li-ion batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第8期95卷 446-463,I0010页

作者： Dongwoo kim Hyeoncheol joo Chanmin kim Seoa kim Wan-Yi kim Sangwoo Han joongkil Park Soyeon Park Heechul Jung Sanghyuk Park Kyungjung Kwon Department of Energy and Mineral Resources Engineering Sejong UniversitySeoul 05006Republic of Korea LIB Recycling Research Group LIB Materials R&D CenterPOSCO HoldingsPohang 37859Republic of Korea Department of Future Energy Convergence Seoul National University of Science&Technology232 Gongreung-roNowon-guSeoul 01811Republic of Korea Autonomous Intelligent Unmanned Flying Vehicles Institute Sejong UniversitySeoul 05006Republic of Korea

This review highlights the importance of recovering valuable metals from spent Li-ion battery(LIB)cathodes through the resynthesis of cathode active materials(CAMs).The resynthesis process of CAMs,a promising recycling method that directly produces CAM precursors from LIB leachate,is *** process encompasses six key steps,including pretreatment,leaching,purification,adjustment of metal concentrations,precursor synthesis,and *** review also investigates the potential introduction of impurity elements during CAM resynthesis and provides tolerance levels for these impurities based on thorough reference ***,it addresses challenges related to the commercialization of the resynthesis ***,this review represents the first comprehensive assessment of CAM resynthesis,including the systematic evaluation of 12 impurity elements(Fe,Li,Al,Cu,C,P,F,Na,Cl,S,Mg,and Zn).Overall,this comprehensive review is poised to support the commercial development of resynthesized CAMs by offering valuable guidelines for managing impurities and streamlining the purification process.

关键词： Li-ion battery Recycling Resynthesis Leachate Impurity

Investigation of operation and degradation mechanisms in ZnTeSe blue quantum-dot light-emitting diodes by identifying recombination zone

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第7期17卷 6527-6533页

作者： Oul Cho Sujin Park Hogeun chang Jiwhan kim Jaekwon kim Sungwoo kim Taehyung kim Jeonghun Kwak Department of Electrical and Computer Engineering Inter-university Semiconductor Research Centerand Soft Foundry InstituteSeoul National UniversitySeoul 08826Republic of Korea Material Research Center Samsung Advanced Institute of TechnologySuwonGyeonggi-do 16419Republic of Korea

ZnTeSe quantum dots(QDs),recognized as promising eco-friendly blue electroluminescent emitters,remain under-explored in light-emitting diode(LED)***,to elucidate the operation and degradation mechanisms of ZnTeSe blue QD-LEDs,stacked ZnTeSe QD layers with discernable luminescence are designed by varying Te doping concentrations,and the recombination zones(RZs)of the blue QD-LEDs are *** RZs are identified near the hole-transport layer(HTL),confirmed by angular-dependent electroluminescence measurements and optical *** addition,in order to investigate carrier dynamics in the process of recombination,the transient electroluminescence(tr-EL)signals of the dichromatic QD-LEDs are *** a result,it is inferred that the RZ initially formed near the electron-transport layer(ETL)due to the high injection barriers of ***,due to the fast electron mobility,the RZ shifts toward the HTL as the operating current *** the device lifetime tests,the RZ remains stationary while the photoluminescence(PL)corresponding to the RZ undergoes a substantial decrease,indicating that the degradation is accelerated by the concentrated *** this study contributes to a deeper understanding of the operational mechanisms of ZnTeSe blue QD-LEDs.

关键词： quantum dots light-emitting diodes degradation recombination zones carrier dynamics

Two-stage dynamic recrystallization and texture evolution in Al-7Mg alloy during hot torsion

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第8期31卷 1900-1911页

作者： Kwang Tae Son chang Hee Cho Myoung Gyun kim Ji Woon Lee School of Mechanical Industrialand Manufacturing EngineeringOregon State UniversityCorvallis OR 97331USA Department of Materials Science Engineering Northwestern UniversityEvanston IL 60208USA Research Institute of Industrial Science and Technology(RIST) Pohang 37673Rep.of Korea Division of Advanced Materials Engineering Kongju National UniversityCheonan 31080Rep.of Korea Center for Advanced Materials and Parts of Powders Kongju National UniversityCheonan 31080Rep.of Korea

Hot torsion tests were performed on the Al-7Mg alloy at the temperature ranging from 300 to 500℃ and strain rates between 0.05 and 5 s^(-1) to explore the progressive dynamic recrystallization(DRX)and texture *** DRX behavior of the alloy manifested two distinct stages:Stage 1 at strain of≤2 and Stage 2 at strains of≥*** Stage 1,there was a slight increase in the DRXed grain fraction(X_(DRX))with predominance of discontinuous DRX(DDRX),followed by a modest change in X_(DRX) until the transition to Stage *** 2 was marked by an accelerated rate of DRX,culminating in a substantial final X_(DRX) of~*** backscattered diffraction(EBSD)analysis on a sample in Stage 2 revealed that continuous DRX(CDRX)predominantly occurred within the(121)[001]grains,whereas the(111)[110]grains underwent a geometric DRX(GDRX)evolution without a noticeable sub-grain ***,a modified Avrami’s DRX kinetics model was utilized to predict the microstructural refinement in the Al-7Mg alloy during the DRX *** this kinetics model did not accurately capture the DDRX behavior in Stage 1,it effectively simulated the DRX rate in Stage *** texture index was employed to assess the evolution of the texture isotropy during hot-torsion test,demonstrating significant improvement(>75%)in texture randomness before the commencement of Stage *** initial texture evolution is attributed to the rotation of parent grains and the substructure evolution,rather than to an increase in X_(DRX).

关键词： Al-7Mg alloys hot deformation hot torsion tests dynamic recrystazlliation microstructure texture