检索结果-南通市图书馆

1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2022年第2期97卷 10-19页

作者： Young-Kyun Kim Min-chul Kim kee-Ahn Lee Department of Materials Science and Engineering Inha UniversityIncheon 22212Republic of Korea Korea Atomic Energy Research Institute(KAERI) Daejeon 34057Republic of Korea

CrMnFeCoNi high-entropy alloys(HEAs)exhibit an excellent combination of tensile strength and ductility at cryogenic *** study led to the introduction of a new method for the development of high-performance CrMnFeCoNi HEAs at cryogenic temperatures by jointly utilizing additive manufacturing(AM)and the addition of interstitial *** interstitial oxygen present in the powder feedstock was transformed into beneficial nano-sized oxides during AM *** HEA nanocomposite fabricated using laser powder bed fusion(L-PBF)not only contains heterogeneous grains and substructures but also a high number density of nano-sized *** tensile results revealed that the L-PBF HEA nanocomposite has superior yield strengths of 0.77 GPa and 1.15 GPa,and tensile strengths of 0.92 GPa and 1.45 GPa at 298 K and 77 K,*** addition,the Charpy impact energies of the samples tested at 298 K and 77 K were measured as 176.2 J and 103.7 J,*** results indicate that the L-PBF HEA nanocomposite successfully overcomes the well-known strength-toughness *** tensile deformation microstructure contained a relatively large number of deformation twins(DTs)at cryogenic temperature,a possible consequence of the decrease in the stacking fault energy with decreasing *** the other hand,cracks were found to propagate along the grain boundaries at room temperature,whereas a transgranular crack was observed at cryogenic temperature in the specimens fractured as a result of the Charpy impact.

关键词： Laser powder bed fusion High-entropy alloy matrix nanocomposite Nano-oxide:cryogenic Tensile Impact toughness

Influence of protein characteristics and the proportion of gluten on end-use quality in Korean wheat cultivars

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Agriculture 2018年第8期17卷 1706-1719页

作者： Seong-Woo Cho Chon-sik Kang Hyeon Seok Ko Byung-kee Baik Kwang-Min Cho chul Soo Park Department of Crop Science & Biotechnology Chonbuk National University National Institute of Crop Science Rural Development Administration Farm & Agribusiness Management Division Rural Development Administration USDA-ARS CSWQRU Soft Wheat Quality Laboratory Research Center of Bioactive Materials Chonbuk National University

The effects of protein characteristics and the proportion of gluten on end-use quality in 13 Korean wheat cultivars for three years were verified in this study. Year, cultivar, and the interaction between the year and the cultivar influenced protein characteristics, the proportion of gluten except for γ-and ω-gliadin using RP-HPLC(reversed-phase high-performance liquid chromatography), and end-use quality. Protein characteristics and the proportion of gluten in Korean wheat cultivars were between those of Australian standard white(ASW) and hard wheat(AH). Korean wheat cultivars exhibited a higher average α+β gliadin proportion than imported wheat, a γ-gliadin proportion similar to that of dark northern spring wheat, and the same ω-gliadin proportion as AH. They showed a bread-loaf volume intermediate between those of ASW and AH and a texture of cooked noodles similar to that of soft white wheat, but less springiness than imported wheat. The cookie diameter of Korean wheat cultivars was similar to that of hard red winter wheat. There was a correlation between bread-loaf volume and protein characteristics, except for the protein content in Korean wheat cultivars. Springiness and cohesiveness of cooked noodles were not correlated with protein characteristics, while hardness was correlated with the protein content and water absorption of a mixograph. Cookie diameter was negatively correlated with the sodium dodecyl sulfate(SDS) sedimentation volume and water absorption of a mixograph. The end-use quality was not correlated with any proportion of gluten composition. Principal component analysis(PCA) showed that the proportion of gluten was not related to the quality of the bread(both PCs, 81.3%), noodle(77.7%), and cookie(82.4%). PCA explained that Keumkang is suitable for superior bread, while Uri is good for cooked noodles and cookies.

关键词： wheat quality flour quality storage proteins

Effect of post heat-treatment on the microstructure and high-temperature oxidation behavior of precipitation hardened IN738LC superalloy fabricated by selective laser melting

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2021年第17期76卷 95-103页

作者： Kyu-sik Kim Sangsun Yang Myeong-Se Kim kee-Ahn Lee Department of Materials Science and Engineering Inha UniversityIncheon 22212Republic of Korea Korea Institute of Materials Science Changwon51508Republic of Korea Auratech Co. Ltd.Seongnam13449Republic of Korea

The present study investigated the effect of as-built and post heat-treated microstructures of IN738LC alloy fabricated via selective laser melting process on high temperature oxidation *** as-built microstructure showed fine cell and columnar structure due to high cooling *** element segregation was observed in inter-cell/inter-columnar *** post heat-treatment,the initially-observed cell structure disappeared,instead bimodal Ni_3(Al,Ti)particles *** temperature(1273 K and 1373 K)oxidation test results showed parabolic oxidation curves regardless of temperature and initial *** as-built IN738LC fabricated via the selective laser melting process displayed oxidation resistance similar to or slightly better than that of IN738LC fabricated via wrought or cast ***-treated SLM IN738LC,although had similar oxidation weight-gain values to those of the SLM asbuilt material at 1273K,showed relatively better oxidation resistance at 1373 *** Ni_3(Al,Ti)precipitate formed in the post heat treatment changed the local chemical composition,thereby led to changes in alumina former/chromia former location and fraction on the alloy *** was concluded that in heat-treated IN738LC increased alumina former fraction was found,and this resulted in excellent oxidation resistance and relatively low weight-gain.

关键词： IN738LC Selective laser melting High temperature oxidation Post heat-treatment Oxidation mechanism

2.47 GPa grade ultra-strong 15Co-12Ni secondary hardening steel with superior ductility and fracture toughness

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2021年第7期66卷 36-45页

作者： Young-Kyun Kim Kyu-sik Kim Young-Beum Song Jung Hyo Park kee-Ahn Lee Department of Materials Science and Engineering Inha UniversityIncheon22212Republic of Korea Agency for Defense Development(ADD) Yuseong-guDaegeon34186Republic of Korea

This study investigated the effect of multi-step heat treatment on the microstructure, mechanical properties and fracture behavior of thick 15 Co-12 Ni secondary hardening steel. As-quenched sample was found to have elongated prior austenite grain(PAG) and coarse lenticular martensitic structure. On the other hand, heat-treated sample was observed to have fine lenticular martensitic structure due to fine PAG size and a lot of nano-sized carbides. Also, after heat treatment, nano-scale reverted austenite film was formed at the martensite interfaces. The heat-treated sample showed 2.47 GPa superior tensile strength and superior elongation of about 12 %. The high strength was mainly due to fine block size and high number density of nano-sized carbides. The average value of plane strain fracture toughness(KIC) was 29.3 MPa m1/2, which indicated a good fracture toughness even with the high tensile strength. The tensile fracture surface was observed to have ductile fracture mode(cup-and-cone) and the formation of about ~1 μm ultra-fine dimples. In addition to this, nano-sized carbides were observed within the *** findings suggested that the nano-sized carbide had a positive effect not only on the strength but also on the ductility of the alloy. The fractured surface after toughness test, also showed ductile fracture mode with a lot of dimples. Based on the above results, correlation among microstructural evolution,deformation and fracture mechanisms along the heat-treatment was also discussed.

关键词： Ultra-high strength High Co-Ni secondary hardening steel Microstructure Tensile properties Fracture toughness Reverted austenite

Stress analysis model of strip winding system with a sleeve for a coil of thin stainless steel

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2017年第1期24卷 1-7页

作者： Yong-hui Park Kyutae Park Sung-yeun Won Wan-kee Hong Hyun-chul Park Graduate School of Engineering Masterships Pohang University of Science and Technology(POSTECH)Kyungbuk 790 784PohangRepublic of Korea Mechanical Engineering Pohang University of Science and Technology(POSTECH)Kyungbuk 790-784PohangRepublic of Korea Mechanical Facility Research Group Engineering Solution CenterPOSCOKyungbuk 790-360PohangRepublic of Korea

In a strip winding process,the sleeve is a hollow cylinder that is mounted between a strip coil and a mandrel to maintain uniform coil shape when the strip coil is very thin,but its deformation behavior has not been investigated ***,a finite element（FE）model was presented to calculate the stress distribution in a sleeve and strip coil when 1-3mm-thick stainless steel was wound around the *** FE model was developed by extending aprevious model by adding a sleeve between the mandrel and strip,and by modifying the boundary and interaction *** strip winding process was divided into an initial process and a steady-state *** the initial process,the minimum and maximum pressure required on the belt wrapper to maintain coil shape by self-friction of the strip was calculated by the FE model when the belt wrapper is ejected at the end of the initial *** the initial process,an analytical model of the steady-state process was established to calculate the stress distribution and was compared with the FE model to validate *** suggested analytical model took 11 sto give the same stress distribution that the FE model took 30 dto produce.

关键词： Strip winding system Belt wrapper Grooved joint Radial stress Hoop stress Von-Mises stress Interference fit

Relationship between physicochemical characteristics of Korean wheat flour and quality attributes of steamed bread

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Agriculture 2019年第11期18卷 2652-2663页

作者： Ji-Eun Kim Byung-kee Baik chul Soo Park Jae-Han Son Chang-Hyun Choi Youngjun Mo Tae-Il Park Chon-sik Kang Seong-Woo Cho Department of Crop Science&Biotechnology Chonbuk National UniversityJeonju 54896Korea USDA-ARS CSWQRU Soft Wheat Quality LaboratoryWoosterOH 44691USA National Institute of Crop Science Rural Development AdministrationWanju 55365Korea

The purpose of this study is to identify major factors affecting the manufacture and quality of steamed bread,consumed in Southeast Asia including China,Japan,and ***,flours of 11 Korean wheat cultivars were used to evaluate quality attributes of two different styles of steamed bread,Korean style steamed bread(KSSB)and northern-style Chinese steamed bread(NSCSB).KSSB prepared more ingredients and higher optimum water absorption of dough than NSCSB because Korean consumers prefer white and glossy surface and soft *** showed lower height,larger diameter and volume of steamed bread,higher stress relaxation,and softer texture of crumb than *** correlation between flour characteristics and quality of steamed bread was different in KSSB and *** 90%of variability in the height and volume of KSSB could be predicted from protein content,mixing tolerance of Mixograph,average particle size of flour,final viscosity and solvent retention *** content and quality parameters also could explain the variation of steamed bread height in *** wheat carrying Glu-A3c allele produced higher volume of steamed bread(704.7 mL)than Glu-A3d allele(645.8 mL)in KSSB,although there was no significant difference in volume of NSCSB by glutenin ***-D1d and Glu-A3c alleles had softer texture of crumb than Glu-D1f and Glu-A3d alleles in KSSB,Glu-B3i allele also showed lower hardness of crumb than their counterpart allele in *** wheat showed higher height and volume of steamed bread,and lower stress relaxation and hardness of crumb than soft wheat in KSSB.

关键词： steamed bread quality wheat flour evaluation

Efficient page layout analysis on small devices

在线全文

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2009年第6期10卷 800-804页

作者： Eun-jung HAN Chee-onn WONG kee-chul JUNG Kyung-ho LEE Eun-yi KIM Department of Naval Architecture and Ocean Engineering Inha University Human-Centered Interfaces Lab Department of Digital MediaSoongsil University Internet and Media Engineering Konkuk University

Previously we have designed and implemented new image browsing facilities to support effective offiine image contents on mobile devices with limited capabilities： low bandwidth, small display, and slow processing. In this letter, we fulfill the automatic production of cartoon contents fitting small-screen display, and introduce a clustering method useful for various types of cartoon images as a prerequisite stage for preserving semantic meaning. The usage of neural networks is to properly cut the various forms of pages. Texture information that is useful for grayscale image segmentation gives us a good clue for page layout analysis using the multilayer perceptron （MLP） based x-y recursive algorithm. We also automatically frame the segment MLP using agglomerative segmentation. Our experimental results show that the combined approaches yield good results of segmentation for several cartoons.

关键词： Efficient page layout analysis MLP-based segmentation Mobile devices Image segmentation Neural network

Comparison of linac-based fractionated stereotactic radiotherapy and tomotherapy treatment plans for intra-cranial tumors

在线全文

学校读者我要写书评

暂无评论

Chinese Physics C 2010年第11期34卷 1768-1774页

作者： Jang Bo Shim Suk Lee Sam Ju Cho Sang Hoon Lee Juree Kim Kwang Hwan Cho chul kee Min Hyun Do Huh Rena Lee Dae sik Yang Young Je Park Won Seob Yoon chul Yong Kim Soo Il Kwon Department of Radiation Oncology College of MedicineKorea University Department of Medical Physics Kyonggi University Department of Radiation Oncology College of MedicineEulji University Department of Radiation Oncology Cheil General Hospital & Women's Healthcare CenterKwandong University College of Medicine Department of Radiation Oncology Soonchunhyang University Boocheon Hospital Department of Radiation Oncology Konyang University Hospital Department of Radiation Oncology Inha University Hospital Department of Radiation Oncology School of MedicineEwha Womans University

This study compares and analyzes stereotactic radiotherapy using tomotherapy and linac-based fractionated stereotactic radiotherapy in the treatment of intra-cranial tumors,according to some *** this study,linac-based fractionated stereotactic radiotherapy and tomotherapy treatment were administered to five patients diagnosed with intra-cranial cancer in which the dose of 18–20 Gy was applied on 3–5 separate *** tumor dosing was decided by evaluating the inhomogeneous index （II） and conformity index （CI）.Also,the radiation-sensitive tissue was evaluated using low dose factors V1,V2,V3,V4,V5,and V10,as well as the non-irradiation ratio volume （NIV）.The values of the II for each prescription dose in the linacbased non-coplanar radiotherapy plan and tomotherapy treatment plan were （0.125±0.113） and （0.090±0.180）,respectively,and the values of the CI were （0.899±0.149） and （0.917±0.114）,*** low dose areas,V1,V2,V3,V4,V5,and V10,in radiation-sensitive tissues in the linac-based non-coplanar radiotherapy plan fell into the ranges 0.3%–95.6%,0.1%–87.6%,0.1%–78.8%,38.8%–69.9%,26.6%–65.2%,and 4.2%–39.7%,respectively,and the tomotherapy treatment plan had ranges of 13.6%–100%,3.5%–100%,0.4%–94.9%,0.2%– 82.2%,0.1%–78.5%,and 0.3%–46.3%,*** the NIV for each organ,it is possible to obtain similar values except for the irradiation area of the brain *** percentages of NIV10%,NIV20%,and NIV30%for the brain stem in each patient were 15%–99.8%,33.4%–100%,and 39.8%–100%,respectively,in the fractionated stereotactic treatment plan and 44.2%–96.5%,77.7%–99.8%,and 87.8%–100%,respectively,in the tomotherapy treatment *** order to achieve higher-quality treatment of intra-cranial tumors,treatment plans should be tailored according to the isodose target volume,inhomogeneous index,conformity index,position of the tumor upon fractionated stereotactic radiosurgery,and radiation dosage for radiation-sensitive tissues.

关键词： fractionated stereotactic radiotherapy tomotherapy treatment plan virtual organ delineation

Second to fourth digit ratio： a predictor of adult lung function

在线全文

学校读者我要写书评

暂无评论

Asian Journal of Andrology 2014年第1期16卷 140-145页

作者： I-Nae Park Ho-kee Yum Sang chul Lee Jin Kyu Oh Tae Beom Kim Department of Pulmonology Inje University Seoul Paik Hospital Seoul Korea Department of Urology Gachon University Gil Hospital Incheon Korea

Sex and sex hormones play a major role in lung physiology. It has been proposed that the ratio of the second to fourth digits （digit ratio） is correlated with fetal sex hormones. We therefore hypothesized that digit ratio might help predict lung function. We investigated the relationship between digit ratio and pulmonary function test （PFT） findings. A total of 245 South Korean patients （162 male, 83 female） aged from 34 to 90 years who were hospitalized for urological surgery were prospectively enrolled. Before administering the PFTs, the lengths of the second and fourth digits of the right hand were measured by a single investigator using a digital Vernier caliper. In males （n = 162）, univariate and multivariate analysis using linear regression models showed that digit ratio was a significant predictive factor of forced vital capacity （FVC） and forced expiratory volume in I second （FEV1）（FVC： r = 0.156, P = 0.047; FEVI： r = 0.160, P = 0.042）. In male ever-smokers （n = 69）, lung functions （FVC and FEV1） were correlated with smoking exposure rather than digit ratio. In female never-smokers （n = 83）, lung functions （FEV1 and FEVI/FVC ratio） were positively correlated with digit ratio on univariate analysis （FEVI： r = 0.242, P = 0.027; FEVI/FVC ratio： r = 0.245, P = 0.026）. Patients with lower digit ratios tend to have decreased lung function. These results suggest that digit ratio is a predictor of airway function.

关键词： airway function digit ratio sex hormone