检索结果-南通市图书馆

Development in oxide metallurgy for improving the weldability of high -strength low-alloy steel-Combined deoxidizers and microalloying elements

引用

International Journal of Minerals,metallurgy and materials 2024年第6期31卷 1263-1284页

作者： Tingting Li Jian Yang state key laboratory of Advanced special Steel School of Materials Science and EngineeringShanghai UniversityShanghai 200444China

The mechanisms of oxide metallurgy include inducing the formation of intragranular acicular ferrite(IAF)using micron-sized inclusions and restricting the growth of prior austenite grains(PAGs)by nanosized particles during welding.The chaotically oriented IAF and refined PAGs inhibit crack initiation and propagation in the steel,resulting in high impact toughness.This work summarizes the com-bined effect of deoxidizers and alloying elements,with the aim to provide a new perspective for the research and practice related to im-proving the impact toughness of the heat affected zone(HAZ)during the high heat input welding.Ti complex deoxidation with other strong deoxidants,such as Mg,Ca,Zr,and rare earth metals(REMs),can improve the toughness of the heat-affected zone(HAZ)by re-fining PAGs or increasing IAF contents.However,it is difficult to identify the specific phase responsible for IAF nucleation because ef-fective inclusions formed by complex deoxidation are usually multiphase.Increasing alloying elements,such as C,Si,Al,Nb,or Cr,con-tents can impair HAZ toughness.A high C content typically increases the number of coarse carbides and decreases the potency of IAF formation.Si,Cr,or Al addition leads to the formation of undesirable microstructures.Nb reduces the high-temperature stability of the precipitates.Mo,V,and B can enhance HAZ toughness.Mo-containing precipitates present good thermal stability.VN or V(C,N)is ef-fective in promoting IAF nucleation due to its good coherent crystallographic relationship with ferrite.The formation of the B-depleted zone around the inclusion promotes IAF formation.The interactions between alloying elements are complex,and the effect of adding dif-ferent alloying elements remains to be evaluated.In the future,the interactions between various alloying elements and their effects on ox-ide metallurgy,as well as the calculation of the nucleation effects of effective inclusions using first principles calculations will become the focus of oxide metallurgy.

关键词： oxide metallurgy technology heat affected zone high-strength low-alloy steel intragranular acicular ferrite microalloying element

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Prediction of lime utilization ratio of dephosphorization in BOF steelmaking based on online sequential extreme learning machine with forgetting mechanism

引用

International Journal of Minerals,metallurgy and materials 2024年第3期31卷 508-517页

作者： Runhao Zhang Jian Yang Han Sun Wenkui Yang state key laboratory of Advanced special Steel School of Materials Science and EngineeringShanghai UniversityShanghai 200444China

The machine learning models of multiple linear regression(MLR),support vector regression(SVR),and extreme learning ma-chine(ELM)and the proposed ELM models of online sequential ELM(OS-ELM)and OS-ELM with forgetting mechanism(FOS-ELM)are applied in the prediction of the lime utilization ratio of dephosphorization in the basic oxygen furnace steelmaking process.The ELM model exhibites the best performance compared with the models of MLR and SVR.OS-ELM and FOS-ELM are applied for sequential learning and model updating.The optimal number of samples in validity term of the FOS-ELM model is determined to be 1500,with the smallest population mean absolute relative error(MARE)value of 0.058226 for the population.The variable importance analysis reveals lime weight,initial P content,and hot metal weight as the most important variables for the lime utilization ratio.The lime utilization ratio increases with the decrease in lime weight and the increases in the initial P content and hot metal weight.A prediction system based on FOS-ELM is applied in actual industrial production for one month.The hit ratios of the predicted lime utilization ratio in the error ranges of±1%,±3%,and±5%are 61.16%,90.63%,and 94.11%,respectively.The coefficient of determination,MARE,and root mean square error are 0.8670,0.06823,and 1.4265,respectively.The system exhibits desirable performance for applications in actual industrial pro-duction.

关键词： basic oxygen furnace steelmaking machine learning lime utilization ratio dephosphorization online sequential extreme learning machine forgetting mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Electrostatically connected nanoarchitected electrocatalytic films for boosted water splitting

引用

Nano Research 2024年第3期17卷 1114-1122页

作者： Chao-Peng Wang Hao Sun Gang Bian Jia-Xi Wang Xixi Pang Guoqi Wang Jian Zhu Xian-He Bu School of materials Science and Engineering National Institute for Advanced MaterialsNankai UniversityTianjin 300350China Tianjin key laboratory of metal and Molecule-Based Material Chemistry Nankai UniversityTianjin 300350China Tianjin key laboratory for rare Earth materials and Applications Nankai UniversityTianjin 300350China

Active sites of two-dimensional(2D)electrocatalysts are often partially blocked owing to their inevitable stacking and hydrophobic polymeric binders in macroscale electrodes,therefore impeding their applications in efficient electrolyzers.Here,using layered double hydroxide(LDH)nanosheets as a model 2D electrocatalyst,we demonstrate that their performance toward water splitting can be boosted when they are electrostatically assembled into an organized structure pillared by hydrophilic polyelectrolytes or nanoparticles in a layer-by-layer(LbL)fashion.In particular,their mass activity on a planar electrode can be as large as 2.267 mA·μg^(-1) toward oxygen evolution reaction(OER),when NiFe-LDH nanosheets are electrostatically connected by poly(sodium 4-styrenesulfonate)(PSS),while drop-casted NiFe-LDH nanosheets only have a mass activity of 0.116 mA·μg^(-1).In addition,these homogeneous NiFe-LDH nanofilms can be easily deposited on three-dimensional(3D)surfaces with high areas,such as carbon cloths,to serve as practical electrodes with overpotentials of 328 mV at a current density of 100 mA·cm^(-2),and stability for 40 h.Furthermore,Pt nanoparticles can be LbL assembled with NiFe-LDH as bifunctional electrodes for synergistically boosted oxygen and hydrogen evolution reactions(HER),leading to successful overall water splitting powered by a 1.5 V battery.This study heralds the spatial control of 2D nanomaterials in nanoscale precision as an efficient strategy for the design of advanced electrocatalysts.

关键词： layer-by-layer(LbL)assembly layered double hydroxides(LDH) two-dimensional(2D)electrocatalysts oxygen evolution reaction(OER) water splitting

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hybrid assembly of conducting nanofiber network for ultra-stretchable and highly sensitive conductive hydrogels

引用

Journal of materials Science & Technology 2024年第2期169卷 1-10页

作者： Yalei Wang Shulong Zeng Shaohong Shi Yuheng Jiang Zhiwei Du Bingzhen Wang Xiurong Li state key laboratory of Featured metal materials and Life-cycle Safety for Composite Structures School of ResourcesEnvironment and MaterialsGuangxi UniversityNanning 530004China state key laboratory of Polymer materials Engineering Polymer Research Institute of Sichuan UniversitySichuan UniversityChengdu 610065China

Conductive hydrogels have attracted extensive attention owing to their promising application prospects in flexible and wearable electronics.However,achieving both high sensitivity and mechanical robustness remains challenging.Herein,a novel and versatile conductive hydrogel based on the hybrid assem-bly of conductive cellulose nanofiber(CNF)networks has been designed and fabricated.Assisted by the templating effect of CNFs and stabilizing effect of negatively charged poly(styrene sulfonate)(PSS),conducting polymer poly(3,4-ethylenedioxythiophene)(PEDOT)was self-organized into three-dimensional nanostructures which constructed a robust conductive network after in-situ oxidative polymerization.The unique structure derived from CNF bio-template endowed polyacrylamide(PAM)hydrogels with improved electrical conductivity and excellent mechanical performance.As a result,the as-fabricated CNF/PEDOT:PSS/PAM hydrogel exhibited an ultimate tensile strain of 1881%and toughness of 3.72 MJ/m^(3),which were 4.07 and 8.27 times higher than the CNF-free hydrogel,respectively.More significantly,the resultant hydrogel sensor showed highly desirable sensing properties,including remarkable sensing range(1100%),high gauge factor(GF=5.16),fast response time(185 ms),and commendable durability,as well as good adhesiveness.Moreover,the hydrogel sensor was able to distinguish subtle physiological activities including phonation and facial expression,and monitor large human body motions such as finger flexion and elbow blending.Besides,it was feasible to integrate the strain sensor on the joints of robots to recognize complicated machine motion signals,showing potential in advanced human-machine interactions.

关键词： Strain sensor Cellulose nanofibers PEDOT:PSS Conductive hydrogel Templating method

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Study on the low mechanical anisotropy of extruded Mg-Zn-Mn-Ce-Ca alloy tube in the compression process

引用

Journal of Magnesium and Alloys 2024年第3期12卷 1054-1067页

作者： Dandan Li Qichi Le Xiong Zhou Xiaoqiang Li Chenglu Hu Ruizhen Guo Tong Wang Ping Wang Wenxin Hu The key laboratory of Electromagnetic Processing of materials Ministry of EducationNortheastern UniversityShenyang 110819China state key laboratory of Baiyunobo rare Earth Resource Research and Comprehensive Utilization Baotou Research Institute of Rare EarthsBaotou 014030China

In this study,the extruded Mg-Zn-Mn-Ce-Ca alloy tube with a low compression anisotropy along the ED,45ED and TD was prepared.The effect of the second phases,initial texture and deformation behavior on this low mechanical anisotropy was investigated.The results revealed that the alloy tube contains the high content(Mg1-xZnx)11Ce phase and the low content of Mg12Ce phase.These second phases are respectively incoherent and coherent with the Mg matrix,and their influence can be ignored.Additionally,the alloy tube exhibited a weak basal fiber texture,where the c-axis was aligned along the 0°∼30°tilt from TD to ED.Such a texture made the initial deformation(at 1.0%∼1.6%strain)of the three samples controlled by comparable basalslip.As deformation progressed(1.6∼9.0%strain),larger amounts of ETWs nucleated and gradually approached saturation in the three samples,re-orienting the c-axis to a 0°∼±30°deviation with respect to the loading directions.Meanwhile,the prismatic and pyramidalslips replaced the dominant deformation progressively until fracture.Eventually,the similar deformation mechanisms determined by the weak initial texture in the three samples contribute to the comparable strain hardening rates,resulting in the low compressive anisotropy of the alloy tube.

关键词： Mg alloy tube Low mechanical anisotropy Weak texture Deformation mechanism.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A new insight into LPSO phase transformation and mechanical properties uniformity of large-scale Mg-Gd-Y-Zn-Zr alloy prepared by multi-pass friction stir processing

引用

Journal of Magnesium and Alloys 2024年第5期12卷 2041-2056页

作者： Xiaohu Guan Wen Wang Ting Zhang Pai Peng Qiang Liu Peng Han Ke Qiao Jun Cai Liqiang Wang Kuaishe Wang School of metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials Processing Xi'an University of Architecture and Technology Xi'an rare metal materials Institute Co.Ltd state key laboratory of metal Matrix Composites School of Material Science and Engineering Shanghai Jiao Tong University

A large-scale fine-grained Mg-Gd-Y-Zn-Zr alloy plate with high strength and ductility was successfully prepared by multi-pass friction stir processing(MFSP) technology in this work. The structure of grains and long period stacking ordered(LPSO) phase were characterized,and the mechanical properties uniformity was investigated. Moreover, a quantitative relationship between the microstructure and tensile yield strength was established. The results showed that the grains in the processed zone(PZ) and interfacial zone(IZ) were refined from 50 μm to 3 μm and 4 μm, respectively, and numerous original LPSO phases were broken. In IZ, some block-shaped 18R LPSO phases were transformed into needle-like 14H LPSO phases due to stacking faults and the short-range diffusion of solute atoms. The severe shear deformation in the form of kinetic energy caused profuse stacking fault to be generated and move rapidly, greatly increasing the transformation rate of LPSO phase. After MFSP, the ultimate tensile strength, yield strength and elongation to failure of the large-scale plate were 367 MPa, 305 MPa and 18.0% respectively. Grain refinement and LPSO phase strengthening were the major strengthening mechanisms for the MFSP sample.In particularly, the strength of IZ was comparable to that of PZ because the strength contribution of the 14H LPSO phase offsets the lack of grain refinement strengthening in IZ. This result opposes the widely accepted notion that IZ is a weak region in MFSP-prepared large-scale fine-grained plate.

关键词： Friction stir processing Multi-pass Mg-Gd-Y-Zn-Zr alloy LPSO phase transformation Mechanical properties

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Versatile MXene Gels Assisted by Brief and Low‑Strength Centrifugation

引用

Nano-Micro Letters 2024年第5期16卷 231-247页

作者： Weiyan Yu Yi Yang Yunjing Wang Lulin Hu Jingcheng Hao Lu Xu Weimin Liu state key laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000People’s Republic of China Shandong laboratory of Advanced materials and Green Manufacturing at Yantai Yantai 264006People’s Republic of China key laboratory of Colloid and Interface Chemistry and key laboratory of special Aggregated materials Shandong UniversityJinan 250100People’s Republic of China

Due to the mutual repulsion between their hydrophilic surface terminations and the high surface energy facilitating their ran-dom restacking,2D MXene nanosheets usually cannot self-assemble into 3D macroscopic gels with various applications in the absence of proper linking agents.In this work,a rapid spontaneous gelation of Ti3C2Tx MXene with a very low dispersion concentration of 0.5 mg mL^(-1) into multifunctional architectures under moderate centrifugation is illustrated.The as-prepared MXene gels exhibit reconfigurable internal structures and tunable rheological,tribological,electrochemical,infrared-emissive and photothermal-conversion properties based on the pH-induced changes in the surface chemistry of Ti_(3)C_(2)T_(x) nanosheets.By adopting a gel with optimized pH value,high lubrication,exceptional specific capacitances(~635 and~408 F g^(-1) at 5 and 100 mV s^(-1),respectively),long-term capacitance retention(~96.7%after 10,000 cycles)and high-precision screen-or extrusion-printing into different high-resolution anticounterfeiting patterns can be achieved,thus displaying extensive potential applications in the fields of semi-solid lubrication,control-lable devices,supercapacitors,information encryption and infrared camouflaging.

关键词： MXene Centrifugation-assisted rapid gelation Lubrication Supercapacitor Anti-counterfeiting applications

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of longitudinal magnetic field on primary dendrite spacing and segregation of directionally solidified single crystal superalloy

引用

Progress in Natural Science:materials International 2024年第1期34卷 26-36页

作者： Congjiang Zhang Yilin Zhou Chen Shen Weili Ren Xiaotan Yuan Biao Ding Haibiao Lu Zuosheng Lei Yunbo Zhong Ang Zhang state key laboratory of Advanced special Steel College of Materials Science and Engineering Shanghai University National Engineering Research Center for Magnesium Alloys Natural Key Laboratory of Advanced Casting Technologies College of Materials Science and EngineeringChongqing University

The primary dendrite spacing(PDS) and segregation of directionally solidified single crystal(SC) superalloy under the longitudinal magnetic field(LMF) were investigated based on the analysis of the whole cross-sectional microstructure at different solidification distances. The results show that the PDS under the LMF remains basically unchanged at different solidification distances, and it is greater than that under no LMF. With the increase of magnetic field intensity, the PDS increases and the macrosegregation decreases. The increasing PDS and reducing segregation under the LMF can be attributed to the increase of solute boundary layer, which expands the non-equilibrium freezing temperature range and brings the effective partition coefficient closer to 1. The increase of the solute enrichment layer thickness could be caused by the downward secondary circulation generated by the thermoelectric magnetic convection(TEMC) near the interface, which drives the migration of solutes towards the interdendritic region. This work not only clarifies the mechanism of LMF controlling PDS and reducing segregation by TEMC, but also provides theoretical guidance for producing high-quality SC superalloys using magnetic fields.

关键词： Primary dendrite spacing Segregation Single crystal superalloy Directional solidification Magnetic field Thermoelectric magnetic convection

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Efficient Spin-Flip between Charge-Transfer states for High-Performance Electroluminescence, without an Intermediate Locally Excited state

引用

Research 2024年第1期2023卷 339-349页

作者： Donghai Zhang Shanshan Jiang Xiaodong Tao Fulin Lin Lingyi Meng Xu-Lin Chen Can-Zhong Lu state key laboratory of Structural Chemistry Fujian Institute of Research on the Structure of MatterChinese Academy of SciencesFuzhouFujian 350002China Fujian Science and Technology Innovation laboratory for Optoelectronic Information of China FuzhouFujian 350108China Xiamen key laboratory of rare Earth Photoelectric Functional materials Xiamen Institute of Rare Earth MaterialsHaixi InstitutesChinese Academy of SciencesXiamenFujian 361021China University of Chinese Academy of Sciences Beijing 100049China

Thermally activated delayed fluorescence(TADF)materials with both high photoluminescence quantum yield(PLQY)and fast reverse intersystem crossing(RISC)are strongly desired to realize efficient and stable organic light-emitting diodes(OLEDs).Control of excited-state dynamics via molecular design plays a central role in optimizing the PLQY and RISC rate of TADF materials but remains challenging.Here,3 TADF emitters possessing similar molecular structures,similar high PLQYs(89.5%to 96.3%),and approximate energy levels of the lowest excited singlet states(S_(1)),but significantly different spin-flipping RISC rates(0.03×10^(6) s^(−1) vs.2.26×10^(6) s^(−1))and exciton lifetime(297.1 to 332.8μs vs.6.0μs)were systematically synthesized to deeply investigate the feasibility of spin-flip between charge-transfer excited states(^(3)CT–^(1)CT)transition.

关键词： transition lifetime desired

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Highly efficient and stable electrocatalyst for hydrogen evolution by molybdenum doped Ni-Co phosphide nanoneedles at high current density

引用

Nano Research 2024年第3期17卷 1066-1074页

作者： Chengyu Huang Zhonghong Xia Jing Wang Jing Zhang Chenfei Zhao Xingli Zou Shichun Mu Jiujun Zhang Xionggang Lu Hong Jin Fan Shengjuan Huo Yufeng Zhao College of Sciences&Institute for Sustainable Energy Shanghai UniversityShanghai 200444China state key laboratory of Metastable materials Science and Technology Hebei Key Laboratory of Heavy Metal Deep-Remediation in Water and Resource ReuseYanshan UniversityQinhuangdao 066004China state key laboratory of Advanced special Steel and Shanghai key laboratory of Advanced Ferrometallurgy School of Materials Science and EngineeringShanghai UniversityShanghai 200444China state key laboratory of Advanced Technology for materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Physical and Mathematical Sciences Nanyang Technological UniversitySingapore639798

There is an increasingly urgent need to develop cost-effective electrocatalysts with high catalytic activity and stability as alternatives to the traditional Pt/C in catalysts in water electrolysis.In this study,microspheres composed of Mo-doped NiCoP nanoneedles supported on nickel foam were prepared to address this challenge.The results show that the nanoneedles provide sufficient active sites for efficient electron transfer;the small-sized effect and the micro-scale roughness enhance the entry of reactants and the release of hydrogen bubbles;the Mo doping effectively improves the electrocatalytic performance of NiCoP in alkaline media.The catalyst exhibits low hydrogen evolution overpotentials of 38.5 and 217.5 mV at a current density of 10 mA·cm^(-2) and high current density of 500 mA·cm^(-2),respectively,and only 1.978 V is required to achieve a current density of 1000 mA·cm^(-2) for overall water splitting.Density functional theory(DFT)calculations show that the improved hydrogen evolution performance can be explained as a result of the Mo doping,which serves to reduce the interaction between NiCoP and intermediates,optimize the Gibbs free energy of hydrogen adsorption(△G_(*H)),and accelerate the desorption rate of *OH.This study provides a promising solution to the ongoing challenge of designing efficient electrocatalysts for high-current-density hydrogen production.

关键词： transition metal phosphides Mo-doped NiCoP hydrogen evolution reaction gradient hydrothermal water splitting

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：