检索结果-南通市图书馆

Journal of Wuhan University of Technology(Materials Science) 2024年第4期39卷 904-911页

作者：易卓然 DENG Haoyuan QIN Mei 孙一 LUO Guoqiang state key laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Graphene prepared by non-covalent modification of sulfonated poly(ether-ether-ketone)(SPG)was combined with polyvinylidene fluoride(PVDF)/Al to improve the PVDF/Al thermal conductivity while reducing the effect of the thermal resistance at the graphene-polymer *** regulation rule of SPG with different contents on the energy release of fluorine-containing system was *** the content of SPG is 4%,the peak pressure and rise rate of SPG/PVDF/Al composite powder during ignition reach the maximum of 4845.28 kPa and 8683.58 kPa/*** the content of SPG is 5%,the PVDF/Al composite powder is completely coated by SPG,and the calorific value of the material reachs the maximum of 29.094 kJ/*** the design and micro-control of the composite powder,the calorific value of the material can be effectively improved,but the improvement of the mass release rate still depends on the graphene content and surface modification state.

关键词： energetic materials PVDF/Al composites graphene modification energy release combustion

A review of linear friction welding of Ni -based superalloys

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,metallurgy and Materials 2024年第6期31卷 1382-1391页

作者： Xiawei Yang Tingxi Meng Qiang Chu Yu Su Zhenguo Guo Rui Xu Wenlong Fan Tiejun Ma Wenya Li state key laboratory of Solidification Processing Shaanxi Key Laboratory of Friction Welding TechnologiesNorthwestern Polytechnical UniversityXi’an 710072China Xi’an Aerospace Engine Co.Ltd. Xi’an 710100China

Ni-based superalloys are one of the most important materials employed in high-temperature applications within the aerospace and nuclear energy industries and in gas turbines due to their excellent corrosion,radiation,fatigue resistance,and high-temperature *** friction welding(LFW)is a new joining technology with near-net-forming characteristics that can be used for the manu-facture and repair of a wide range of aerospace *** paper reviews published works on LFW of Ni-based superalloys with the aim of understanding the characteristics of frictional heat generation and extrusion deformation,microstructures,mechanical proper-ties,flash morphology,residual stresses,creep,and fatigue of Ni-based superalloy weldments produced with LFW to enable future optim-um utilization of the LFW process.

关键词： Ni-based superalloys linear friction welding microstructures mechanical properties flash morphology

Achieving a remarkable low-temperature tensile ductility in a high-strength tungsten alloy

在线全文

学校读者我要写书评

暂无评论

Tungsten 2024年第1期6卷 150-161页

作者： Xiang Cheng Zhuo-Ming Xie Xue-Feng Xie Long-Fei Zeng Rui Liu Jun-Feng Yang Xue-Bang Wu Xian-Ping Wang Chang-Song Liu Qiang-Feng Fang key laboratory of Materials Physics Institute of Solid State PhysicsHFIPSChinese Academy of SciencesHefei 230031China University of Science and Technology of China Hefei 230026China Faculty of Materials metallurgy and Chemistry Jiangxi University of Science and TechnologyGanzhou 341000China

Hot-swaging yields a high ultimate tensile strength of 712 MPa but a limited tensile ductility with the total elongation of3.6%at a testing temperature of 200℃in a representative W-0.5wt.%ZrC *** this work,the evolution of Vickers microhardness with annealing temperatures is investigated in detail,which contributes to a rough index chart to guide the search for an optimized post-annealing *** the post-annealing around 1300℃,an outstanding tensile ductility at200℃,including a uniform elongation of 14%and a total elongation of~25%,has been achieved without the sacrifice of its *** evolution of dislocations and grain structures with the annealing temperatures accessed through backscattered scanning electron microscope and transmission electron microscope analysis reveals that the improved low-temperature tensile ductility has resulted from the reduction of residual dislocations and dislocation tanglement via the static recovery,which provides more room to accommodate dislocations,and hence stronger strain hardening ability and tensile ductility.

关键词： Tungsten Low-temperature ductility Annealing Dislocations

Catalytic effect in lithium metal batteries: From heterogeneous catalyst to homogenous catalyst

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第3期90卷 305-326,I0008页

作者： Haining Fan Xuan-Wen Gao Hailong Xu Yichun Ding Shi-Xue Dou Wen-Bin Luo School of Fashion and Textiles The Hong Kong Polytechnic UniversityHong Kong 100872China Institute for Energy Electrochemistry and Urban Mines metallurgy School of MetallurgyNortheastern UniversityShenyang 110819LiaoningChina Institute of Energy Materials Science University of Shanghai for Science and TechnologyShanghai 200000China state key laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi'an 710000ShaanxiChina

Lithium metal batteries are regarded as prominent contenders to address the pressing needs owing to the high theoretical *** the broader implementation,the primary obstacle lies in the intricate multi-electron,multi-step redox reaction associated with sluggish conversion kinetics,subsequently giving rise to a cascade of parasitic *** order to smooth reaction kinetics,catalysts are widely introduced to accelerate reaction rate via modulating the energy *** past decades,a large amount of research has been devoted to the catalyst design and catalytic mechanism exploration,and thus the great progress in electrochemical performance has been ***,it is necessary to make a comprehensive review toward key progress in catalyst design and future development *** this review,the basic mechanism of lithium metal batteries is provided along with corresponding advantages and existing challenges detailly *** main catalysts employed to accelerate cathode reaction with emphasis on their catalytic mechanism are summarized as ***,the rational design and innovative direction toward efficient catalysts are suggested for future application in metal-sulfur/gas battery and *** review is expected to drive and benefit future research on rational catalyst design with multi-parameter synergistic impacts on the activity and stability of next-generation metal battery,thus opening new avenue for sustainable solution to climate change,energy and environmental issues,and the potential industrial economy.

关键词： Energy storage and conversion Metal battery Sulfur battery Air battery Catalytic effect Heterogeneous catalyst Homogeneous catalyst

Engineering oxygen vacancies on Tb-doped ceria supported Pt catalyst for hydrogen production through steam reforming of long-chain hydrocarbon fuels

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第4期68卷 181-192页

作者： Zhourong Xiao Changxuan Zhang Peng Li Desong Wang Xiangwen Zhang Li Wang Jijun Zou Guozhu Li state key laboratory of Metastable Materials Science and Technology(MMST) Hebei Key Laboratory of Applied ChemistryCollege of Environmental and Chemical EngineeringYanshan UniversityQinhuangdao 066004China key laboratory for Green Chemical Technology of Ministry of Education School of Chemical Engineering and TechnologyTianjin UniversityTianjin 300072China

Steam reforming of long-chain hydrocarbon fuels for hydrogen production has received great attention for thermal management of the hypersonic vehicle and fuel-cell *** this work,Pt catalysts supported on CeO_(2)and Tb-doped CeO_(2)were prepared by a precipitation *** physical structure and chemical properties of the as-prepared catalysts were characterized by powder X-ray diffraction,scanning electron microscopy,transmission electron microscopy,Raman spectroscopy,H_(2)temperature programmed reduction,and X-ray photoelectron *** results show that Tb-doped CeO_(2)supported Pt possesses abundant surface oxygen vacancies,good inhibition of ceria sintering,and strong metal-support interaction compared with CeO_(2)supported *** catalytic performance of hydrogen production via steam reforming of long-chain hydrocarbon fuels(n-dodecane)was *** with 2Pt/CeO_(2),2Pt/Ce_(0.9)Tb_(0.1)O_(2),and 2Pt/Ce_(0.5)Tb_(0.5)O_(2),the 2Pt/Ce_(0.7)Tb_(0.3)O_(2)has higher activity and stability for hydrogen production,on which the conversion of n-dodecane was maintained at about 53.2%after 600 min reaction under 700℃at liquid space velocity of 9 ml·g^(-1)·h^(-1).2Pt/CeO_(2)rapidly deactivated,the conversion of n-dodecane was reduced to only 41.6%after 600 min.

关键词： Steam reforming n-Dodecane Hydrogen production Pt-based catalyst Oxygen vacancy CeO_(2)

Effect of Al content in molten steel on interaction between MgO-C refractory and SPHC steel

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第4期31卷 838-848页

作者： Fu-bin Gao Fu-ming Wang Xiang Zhang Tian-yu Du Xin-hua Wangg School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China Handan Iron and Steel Company Hegang GroupHandan 056015HebeiChina The state key laboratory of Refractories and metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina

The effect of Al content in molten steel on the interaction between SPHC steel(0.005-0.068 wt.%Al,and 19×10^(-4)-58×10^(-4)wt.%O)and MgO-C refractory(11.63 wt.%C)was ***-metallic inclusions in the steel were examined at various periods(0,5,15,30,45,and 60 min)as well as the MgO-C interface after 60 min of corrosion at 1600℃.The results show that when MgO-C refractory comes into contact with SPHC steel,the refractory interface consists of three layers arranged from the innermost to the outermost,including the original refractory layer,the dense MgO layer,and the iron infiltration *** carbon in the MgO-C refractories and the Al content in the molten steel undergo a reaction with the MgO in the refractories,resulting in an increase in Mg concentration in the *** Al content in the molten steel from 0.005 to 0.068 wt.%causes a spinel layer to appear at the interface,and the disappearance time of Al_(2)O_(3) inclusions in the steel decreases from 60 to 30 min,while the average MgO content in inclusions ***,controlling the Al content in the molten steel and the smelting duration can help regulate the formation of spinel inclusionsinthe steel.

关键词： MgO-C refractory SPHC steel Inclusion-Spinel Al-killed steel Interfacial reaction

Improved performance of LiMn_(0.8)Fe_(0.2)PO_(4) by addition of fluoroethylene carbonate electrolyte additive

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第6期35卷 229-233页

作者： Guihuang Fang Wei Chen Hongwei Yang Haisheng Fang Chuang Yu Maoxiang Wu Faculty of metallurgy and Energy Engineering Kunming University of Science and TechnologyKunming 650093China key laboratory of Optoelectronic Materials Chemistry and Physics Fujian Institute of Research on the Structure of MatterChinese Academy of SciencesFuzhou 350002China state key laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China

The addition of electrolyte additives is an effective strategy for tuning the property of the electrolyte to engineer the electrode/electrolyte interface,and there exist obvious discrepancies regarding the effect of fluoroethylene carbonate(FEC)as an electrolyte additive on the performance of *** FEC is introduced into the electrolyte of the LiMn_(0.8)Fe_(0.2)PO_(4)/Li cell and its effect on the properties of the LiMn_(0.8)Fe_(0.2)PO_(4) is *** is found that the addition of FEC in the electrolyte has a positive effect on the performance of the LiMn_(0.8)Fe_(0.2)PO_(4) cathode,which can be attributed to the reduced products generated by the interfacial side-reactions on the LiMn_(0.8)Fe_(0.2)PO_(4) cathode surface and the decreased metal dissolution in the FEC-containing electrolyte,thanks to the higher oxidation resistance of FEC and the easier and stronger binding of FEC and PF_6^(-).

关键词： Lithium-ion batteries LiMn_(0.8)Fe_(0.2)PO_(4) Cathode Electrolyte additives Fluoroethylene carbonate

Development in oxide metallurgy for improving the weldability of high -strength low-alloy steel-Combined deoxidizers and microalloying elements

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,metallurgy and Materials 2024年第6期31卷 1263-1284页

作者： Tingting Li Jian Yang state key laboratory of Advanced Special Steel School of Materials Science and EngineeringShanghai UniversityShanghai 200444China

The mechanisms of oxide metallurgy include inducing the formation of intragranular acicular ferrite(IAF)using micron-sized inclusions and restricting the growth of prior austenite grains(PAGs)by nanosized particles during *** chaotically oriented IAF and refined PAGs inhibit crack initiation and propagation in the steel,resulting in high impact *** work summarizes the com-bined effect of deoxidizers and alloying elements,with the aim to provide a new perspective for the research and practice related to im-proving the impact toughness of the heat affected zone(HAZ)during the high heat input *** complex deoxidation with other strong deoxidants,such as Mg,Ca,Zr,and rare earth metals(REMs),can improve the toughness of the heat-affected zone(HAZ)by re-fining PAGs or increasing IAF ***,it is difficult to identify the specific phase responsible for IAF nucleation because ef-fective inclusions formed by complex deoxidation are usually *** alloying elements,such as C,Si,Al,Nb,or Cr,con-tents can impair HAZ toughness.A high C content typically increases the number of coarse carbides and decreases the potency of IAF ***,Cr,or Al addition leads to the formation of undesirable *** reduces the high-temperature stability of the ***,V,and B can enhance HAZ ***-containing precipitates present good thermal *** or V(C,N)is ef-fective in promoting IAF nucleation due to its good coherent crystallographic relationship with *** formation of the B-depleted zone around the inclusion promotes IAF *** interactions between alloying elements are complex,and the effect of adding dif-ferent alloying elements remains to be *** the future,the interactions between various alloying elements and their effects on ox-ide metallurgy,as well as the calculation of the nucleation effects of effective inclusions using first principles calculations will become the focus of

关键词： oxide metallurgy technology heat affected zone high-strength low-alloy steel intragranular acicular ferrite microalloying element

Prediction of lime utilization ratio of dephosphorization in BOF steelmaking based on online sequential extreme learning machine with forgetting mechanism

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,metallurgy and Materials 2024年第3期31卷 508-517页

作者： Runhao Zhang Jian Yang Han Sun Wenkui Yang state key laboratory of Advanced Special Steel School of Materials Science and EngineeringShanghai UniversityShanghai 200444China

The machine learning models of multiple linear regression(MLR),support vector regression(SVR),and extreme learning ma-chine(ELM)and the proposed ELM models of online sequential ELM(OS-ELM)and OS-ELM with forgetting mechanism(FOS-ELM)are applied in the prediction of the lime utilization ratio of dephosphorization in the basic oxygen furnace steelmaking *** ELM model exhibites the best performance compared with the models of MLR and ***-ELM and FOS-ELM are applied for sequential learning and model *** optimal number of samples in validity term of the FOS-ELM model is determined to be 1500,with the smallest population mean absolute relative error(MARE)value of 0.058226 for the *** variable importance analysis reveals lime weight,initial P content,and hot metal weight as the most important variables for the lime utilization *** lime utilization ratio increases with the decrease in lime weight and the increases in the initial P content and hot metal weight.A prediction system based on FOS-ELM is applied in actual industrial production for one *** hit ratios of the predicted lime utilization ratio in the error ranges of±1%,±3%,and±5%are 61.16%,90.63%,and 94.11%,*** coefficient of determination,MARE,and root mean square error are 0.8670,0.06823,and 1.4265,*** system exhibits desirable performance for applications in actual industrial pro-duction.

关键词： basic oxygen furnace steelmaking machine learning lime utilization ratio dephosphorization online sequential extreme learning machine forgetting mechanism

Spin logic devices based on negative differential resistance -enhanced anomalous Hall effect

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,metallurgy and Materials 2024年第6期31卷 1437-1448页

作者： Hongming Mou Ziyao Lu Yuchen Pu Zhaochu Luo Xiaozhong Zhang key laboratory of Advanced Materials(MOE) School of Materials Science and EngineeringTsinghua UniversityBeijing 100084China state key laboratory of Artificial Microstructure and Mesoscopic Physics School of PhysicsPeking UniversityBeijing 100871China

Owing to rapid developments in spintronics,spin-based logic devices have emerged as promising tools for next-generation computing *** paper provides a comprehensive review of recent advancements in spin logic devices,particularly focusing on fundamental device concepts rooted in nanomagnets,magnetoresistive random access memory,spin–orbit torques,electric-field modu-lation,and magnetic domain *** operation principles of these devices are comprehensively analyzed,and recent progress in spin logic devices based on negative differential resistance-enhanced anomalous Hall effect is *** devices exhibit reconfigur-able logic capabilities and integrate nonvolatile data storage and computing *** current-driven spin logic devices,negative differential resistance elements are employed to nonlinearly enhance anomalous Hall effect signals from magnetic bits,enabling reconfig-urable Boolean logic ***,voltage-driven spin logic devices employ another type of negative differential resistance ele-ment to achieve logic functionalities with excellent cascading *** cascading several elementary logic gates,the logic circuit of a full adder can be obtained,and the potential of voltage-driven spin logic devices for implementing complex logic functions can be *** review contributes to the understanding of the evolving landscape of spin logic devices and underscores the promising pro-spects they offer for the future of emerging computing schemes.

关键词： spin logic spin–orbit torque negative differential resistance full-adder