检索结果-南通市图书馆

Enhancing efficiency and stability of organic solar cells through a simplified four-step synthesis of fully non-fused ring electron acceptor

引用

Journal of Energy Chemistry 2024年第6期93卷 601-608,I0015页

作者： Chenyang Han Huanhuan Gao Yanna Sun Yuanyuan Kan Zhaozhao Bi Wei Ma Yani Zhang Juan Antonio Zapien Yingguo Yang Ke Gao College of New Energy Xi’an Shiyou UniversityXi’an 710065ShaanxiChina Shandong Provincial key laboratory for Science of Material Creation and Energy Conversion Institute of Frontier ChemistrySchool of Chemistry and Chemical EngineeringShandong UniversityQingdao 266237ShandongChina state key laboratory for mechanical behavior of materials Xi’an Jiaotong UniversityXi’an 710049ShaanxiChina Department of materials Science and Engineering City University of Hong KongKowloonHong Kong 99907China School of Microelectronics Fudan UniversityShanghai 200433China

Design and synthesis of superior cost-effective non-fullerene acceptors(NfAs)are still big challenges for facilitating the commercialization of organic solar cells(oSCs),yet to be realized.Herein,two medium bandgap fully non-fused ring electron acceptors(NfREAs,medium bandgap,i,e.,1,3-1,8 eV),namely PTR-2Cl and PTR-4Cl are synthesized with only four steps by using intramolecular noncovalent interaction central core,structured alkyl side chain orientation linking units and flanking with different electron-withdrawing end group.Among them,PTR-4C1 exhibits increased average electrostatic potential(ESP)difference with polymer donor,enhanced crystallinity and compactπ-πstacking compared with the control molecule PTR-2CI.As a result,the PTR-4Cl-based oSC achieved an impressive power conversion efficiency(PCE)of 14.72%,with a much higher open-circuit voltage(V_(oC))of 0.953 V and significantly improved fill factor(ff)of 0.758,demonstrating one of the best acceptor material in the top-performing fully NfREA-based oSCs with both high PCE and V_(oC).Notably,PTR-4Cl-based cells maintain a good T_80lifetime of its initial PCE after over 936 h under a continuous thermal annealing treatment and over1300 h T_(80)lifetime without encapsulation.This work provides a cost-effective design strategy for NfREAs on obtaining high V_(oC),efficient exciton dissociation,and ordered molecular packing and thus high-efficiency and stable oSCs.

关键词： organic solar cells fully non-fused ring acceptors End group engineering Morphology regulation High efficiency

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A first-principles Study on the Adhesion Strength,Interfacial Stability,and Electronic Properties of Mg/Mg_(2)Y Interface

引用

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 537-550页

作者： Yunxuan Zhou Wenjun Tian Quan Dong Hailian Wang Jun Tan Xianhua Chen Kaihong Zheng fusheng Pan College of materials Science and Engineering National Engineering Research Center for Magnesium AlloysChongqing UniversityChongqing 400044China state key laboratory of mechanical Transmission Chongqing UniversityChongqing 400044China Institute of New materials Guangdong Academy of SciencesGuangzhou 510650China

The interfacial microstructures and configurations directly affect the comprehensive properties of the composites,but their interfacial adhesion mechanism is complicated to expound by experimental methods.In this work,based on the stacking sequence of the Mg/Mg_(2)Y interface models,nine different Mg/Mg_(2)Y interface configurations with top site,bridge site,and hollow site(HCP)under Mg1,Mg_(2),and Y terminations were successfully constructed and systematically explored by first-principles calculations.The results showed that the Mg_(2)Y(0001)surface with Y termination is the most stable when the yttrium chemical potential()is less than-1.09 eV;otherwise,Mg_(2)Y(0001)surface with Mg1 termination is the most stable.The seven-layer Mg(0001)and eleven-layer Mg_(2)Y(0001)slabs are employed to reflect the bulk-like interior properties.Additionally,the Mg(0001)/Mg_(2)Y(0001)with the Y-HCP stacking has the largest interface thermodynamic stability with the value of 2.383 J/m^(2) in all interface configurations owing to its largest work of adhesion.In addition,the interfacial energy of Y-HCP stacking is significantly smaller than those of Mg1-HCP when is approximately less than-0.55 eV,showing that it is more stable.The thermodynamic stability of Mg/Mg_(2)Y with Y-HCP is due to Mg-Y chemical bonds formed between Mg and Y atoms.Lastly,the Mg/Mg_(2)Y interfaces are strong interfaces based on the Griffith fracture theory.

关键词： Mg/Mg_(2)Y interface Interface stability Work of adhesion Electronic structure first-principles calculations

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Strengthening mechanism and forming control of linear friction welded GH4169 alloy joints

引用

Chinese Journal of Aeronautics 2024年第4期37卷 609-626页

作者： Yu SU Xiawei YANG Tingxi MENG Xinyuan HE Dong WU Wenya LI Shuo YIN state key laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi key laboratory of friction Welding Technologies School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Department of mechanical Manufacturing and Biomedical EngineeringParsons BuildingTrinity College DublinThe University of DublinDublin 2Ireland

Numerical simulation and experimental research on Linear friction Welding(LfW) for GH4169 superalloy were carried out. Based on the joint microstructure and mechanical properties,a suitable welding process was determined, which provided an important theoretical basis for the manufacture and repair of aeroengine components such as the superalloy blisk. The results show that the joint strain rate gradually increases with the increase of welding frequency, and the deformation resistance of the thermoplastic metal increases in the welding process, resulting in the interface thermoplastic metal not being extruded in time to form a flash, so the joint shortening amount gradually decreases. The thermoplastic metal in the center of the welding surface is kept at high welding temperature for a long time, resulting in the decrease of the joint strength. The microhardness of the joint shows a “W” distribution perpendicular to the weld, and most of the joints break in the Thermo-mechanically Affected Zone(TMAZ) with high tensile strength and low elongation.When the welding area is increased without changing the aspect ratio of the welding surface, the interface peak temperature increases gradually, and the joint shortening amount decreases with the increase of the welding interface size.

关键词： Linear friction Welding(LfW) Microstructure mechanical properties Numerical simulation Joint shortening amount

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Twisted Integration of Complex oxide Magnetoelectric Heterostructures via Water‑Etching and Transfer Process

引用

Nano-Micro Letters 2024年第1期16卷 360-369页

作者： Guannan Yang Guohua Dong Butong Zhang Xu Xu Yanan Zhao Zhongqiang Hu Ming Liu state key laboratory for Manufacturing Systems Engineering Electronic Materials Research LaboratoryKey Laboratory of the Ministry of EducationEngineering Research Center of Spin Quantum Sensor ChipsUniversities of Shaanxi ProvinceSchool of Electronic Science and EngineeringXi’an Jiaotong UniversityXi’an 710049People’s Republic of China

Manipulating strain mode and degree that can be applied to epitaxial complex oxide thin films have been a cornerstone of strain engineering.In recent years,lift-off and transfer technology of the epitaxial oxide thin films have been developed that enabled the integration of heterostructures without the limitation of material types and crystal orientations.Moreover,twisted integration would provide a more interesting strategy in artificial magnetoelectric heterostructures.A specific twist angle between the ferroelectric and ferromagnetic oxide layers corresponds to the distinct strain regulation modes in the magnetoelectric coupling process,which could provide some insight in to the physical phenomena.In this work,the La_(0.67)Sr_(0.33)Mno_(3)(001)/0.7Pb(Mg_(1/3)Nb_(2/3))o_(3)-0.3PbTio_(3)(011)(LSMo/PMN-PT)heterostructures with 45.and 0.twist angles were assembled via water-etching and transfer process.The transferred LSMo films exhibit a fourfold magnetic anisotropy with easy axis along LSMo.A coexistence of uniaxial and fourfold magnetic anisotropy with LSMo[110]easy axis is observed for the 45°Sample by applying a 7.2 kV cm^(−1)electrical field,significantly different from a uniaxial anisotropy with LSMo[100]easy axis for the 0°Sample.The fitting of the ferromagnetic resonance field reveals that the strain coupling generated by the 45°twist angle causes different lattice distortion of LSMo,thereby enhancing both the fourfold and uniaxial anisotropy.This work confirms the twisting degrees of freedom for magnetoelectric coupling and opens opportunities for fabricating artificial magnetoelectric heterostructures.

关键词： Magnetoelectric heterostructures Twist angle Epitaxial lift-off Magnetic anisotropy ferromagnetic resonance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

one-step hydrothermal synthesis of few-layered metallic phase MoS2 for high-performance supercapacitors

引用

Progress in Natural Science:materials International 2024年第2期34卷 429-436页

作者： Jing Xu Xulong Yuan Yujie Zhao Shaoqi Rui Qingling Jia Han Li Shun Lu Bing Li Yongxing Zhang Xuebin Zhu Anhui Province key laboratory of Pollutant Sensitive materials and Environmental Remediation Anhui Province Key Laboratory of Intelligent Computing and Applications Anhui Province Industrial Generic Technology Research Center for Alumics Materials Huaibei Normal University Chongqing Institute of Green and Intelligent Technology Chinese Academy of Sciences key laboratory of materials Physics Institute of Solid State Physics HFIPS Chinese Academy of Sciences

In recent years,molybdenum disulfide（MoS2） has gained significant attention in the scientific community.fewlayered MoS2demonstrates unique properties and potential applications.However,the synthesis of few-layered and high-purity 1T-MoS2is still a challenge.In this study,we successfully employed a hydrothermal method to synthesize few-layered and high-purity 1T-MoS2.The purity of the material is controlled by a combination of sodium borohydride and ethanol.Notably,the few-layered 1T-MoS2exhibits exceptional performance as a supercapacitor,including the high specific capacitance(250.3 f g-1at a current density of 1 A g-1) and excellent long-trem cycling stability（90.7 % after 5000 cycles）.Meanwhile,the asymmetric device assembled by 6-fL-1TMoS2and active carbon on carbon cloths exhibits excellent flexibility and high energy and power density(23.1μWh cm-2at 600 μW cm-2,55 μWh cm-2at 12000 μW cm-2).This work provides valuable insights into the synthesis of few-layered and high-purity 1T-MoS2,opening up new avenues for further research and applications.

关键词： 1T-MoS2 few-layered High-purity one-pot hydrothermal method Supercapacitor

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Bioinspired Tactile Sensation Based on Synergistic Microcrack-Bristle Structure Design toward High mechanical Sensitivity and Direction-Resolving Capability

引用

Research 2024年第1期2023卷 611-624页

作者： Yiqun Zhang Qi Liu Wenjuan Ren Yangyang Song Hua Luo Yangyang Han Liang He Xiaodong Wu Zhuqing Wang School of mechanical Engineering Sichuan UniversityChengdu 610065China Med+X Center for Manufacturing West China HospitalSichuan UniversityChengdu 610041China state key laboratory of Polymer materials Engineering Polymer Research Institute of Sichuan UniversityChengdu 610065China

Natural tactile sensation is complex,which involves not only contact force intensity detection but also the perception of the force direction,the surface texture,and other mechanical parameters.Nevertheless,the vast majority of the developed tactile sensors can only detect the normal force,but usually cannot resolve shear force or even distinguish the directions of the force.Here,we present a new paradigm of bioinspired tactile sensors for resolving both the intensity and the directions of mechanical stimulations via synergistic microcrack-bristle structure design and cross-shaped configuration engineering.The microcrack sensing structure gives high mechanical sensitivity to the tactile sensors,and the synergistic bristle structure further amplifies the sensitivity of the sensors.The cross-shaped configuration engineering of the synergistic microcrack-bristle structure further endows the tactile sensors with good capability to detect and distinguish the directions of the applied mechanical forces.The as-fabricated tactile sensors exhibit a high sensitivity(25.76 N^(−1)),low detection limit(5.4 mN),desirable stability(over 2,500 cycles),and good capability to resolve both mechanical intensity and directional features.As promising application scenarios,surface texture recognition and biomimetic path explorations are successfully demonstrated with these tactile sensors.This newly proposed tactile sensation strategy and technology have great potential applications in ingenious tactile sensation and construction of various robotic and bionic prostheses with high operational dexterity.

关键词： crack sensation directions

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

flexible pressure sensors with ultrahigh stress tolerance enabled by periodic microslits

引用

Microsystems & Nanoengineering 2024年第1期10卷 301-311页

作者： Song Wang Chenying Wang Yifan Zhao Yujing Zhang Yaxin Zhang Xiangyue Xu Qijing Lin Kai Yao Yuheng Wang feng Han Yu Sun Zhuangde Jiang state key laboratory for Manufacturing Systems Engineering International Joint Laboratory for Micro/Nano Manufacturing and Measurement TechnologiesSchool of Mechanical EngineeringXi’an Jiaotong UniversityXi’anChina state key laboratory for Manufacturing Systems Engineering International Joint Laboratory for Micro/Nano Manufacturing and Measurement TechnologiesSchool of Instrument Science and TechnologyXi’an Jiaotong UniversityXi’anChina The faculty of Electrical Engineering and Computer Science Ningbo UniversityNingboChina Department of mechanical and Industrial Engineering University of TorontoTorontoCanada

Stress tolerance plays a vital role in ensuring the effectiveness of piezoresistive sensing films used in flexible pressure sensors.However,existing methods for enhancing stress tolerance employ dome-shaped,wrinkle-shaped,and pyramidal-shaped microstructures in intricate molding and demolding processes,which introduce significant fabrication challenges and limit the sensing performance.To address these shortcomings,this paper presents periodic microslits in a sensing film made of multiwalled carbon nanotubes and polydimethylsiloxane to realize ultrahigh stress tolerance with a theoretical maximum of 2.477 MPa and a sensitivity of 18.092 kPa−1.The periodic microslits permit extensive deformation under high pressure(e.g.,400 kPa)to widen the detection range.Moreover,the periodic microslits also enhance the sensitivity based on simultaneously exhibiting multiple synapses within the sensing interface and between the periodic sensing cells.The proposed solution is verified by experiments using sensors based on the microslit strategy for wind direction detection,robot movement sensing,and human health monitoring.In these experiments,vehicle load detection is achieved for ultrahigh pressure sensing under an ultrahigh pressure of over 400 kPa and a ratio of the contact area to the total area of 32.74%.The results indicate that the proposed microslit strategy can achieve ultrahigh stress tolerance while simplifying the fabrication complexity of preparing microstructure sensing films.

关键词： robot shaped stress

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Compliance motion control of the hydraulic dual-arm manipulator with adaptive mass estimation of unknown object

引用

frontiers of mechanical Engineering 2024年第1期19卷 35-52页

作者： Bolin SUN Min CHENG Ruqi DING Bing XU state key laboratory of mechanical Transmissions Chongqing UniversityChongqing 400044China key laboratory of Conveyance and Equipment(Ministry of Education) East China Jiaotong UniversityNanchang 330013China state key laboratory of fluid Power and Mechatronic Systems Zhejiang UniversityHangzhou 310027China

Given the limited operating ability of a single robotic arm,dual-arm collaborative operations have become increasingly prominent.Compared with the electrically driven dual-arm manipulator,due to the unknown heavy load,difficulty in measuring contact forces,and control complexity during the closed-chain object transportation task,the hydraulic dual-arm manipulator(HDM)faces more difficulty in accurately tracking the desired motion trajectory,which may cause object deformation or even breakage.To overcome this problem,a compliance motion control method is proposed in this paper for the HDM.The mass parameter of the unknown object is obtained by using an adaptive method based on velocity error.Due to the difficulty in obtaining the actual internal force of the object,the pressure signal from the pressure sensor of the hydraulic system is used to estimate the contact force at the end-effector(EE)of two hydraulic manipulators(HMs).further,the estimated contact force is used to calculate the actual internal force on the object.Then,a compliance motion controller is designed for HDM closed-chain collaboration.The position and internal force errors of the object are reduced by the feedback of the position,velocity,and internal force errors of the object to achieve the effect of the compliance motion of the HDM,i.e.,to reduce the motion error and internal force of the object.The required velocity and force at the EE of the two HMs,including the position and internal force errors of the object,are inputted into separate position controllers.In addition,the position controllers of the two individual HMs are designed to enable precise motion control by using the virtual decomposition control method.finally,comparative experiments are carried out on a hydraulic dual-arm test bench.The proposed method is validated by the experimental results,which demonstrate improved object position accuracy and reduced internal force.

关键词： hydraulic dual-arm manipulator compliance motion control unknown object adaptive mass estimation nonlinear control

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tough Semi-interpenetrating Polyvinylpyrrolidone/Polyacrylamide Hydrogels Enabled by Bioinspired Hydrogen-bonding Induced Phase Separation

引用

Chinese Journal of Polymer Science 2024年第5期42卷 591-603,I0006页

作者： Qiong-Jun Xu Zhao-Yang Yuan Chang-Cheng Wang Hao Liang Yu Shi Hai-Tao Wu Hu Xu Jing Zheng Jin-Rong Wu state key laboratory of Polymer materials Engineering College of Polymer Science and EngineeringSichuan UniversityChengdu610065China

Semi-interpenetrating(semi-IPN)hydrogels formed by the continuous interpenetration of cross-linked polymer network and linear non-crosslinked polymer with multifunctionality are widely used in biomedical and other fields.However,the negative impact of linear polymer on the homogeneity of the cross-linked network often leads to a decrease in the mechanical properties of semi-IPN hydrogels and severely limits their applications.Herein,a bioinspired hydrogen-bonding induced phase separation strategy is presented to construct the tough semi-IPN polyvinylpyrrolidone/polyacrylamide hydrogels(named PVP/PAM hydrogels),including the linear polymer polyvinylpyrrolidone(PVP)and cross-linked polyacrylamide(PAM)network.The resultant PVPx/PAM hydrogels exhibit unique phase separation induced by the hydrogen bonding between PVP and PAM and affected by the amount of substance of PVP.Meanwhile,the phase separation of PVPx/PAM hydrogels results in excellent mechanical properties with a strain of 2590%,tensile strength of 0.28 MPa and toughness of 2.17 MJ/m^(3).More importantly,the hydrogen bonding between PVP and PAM firstly disrupts to dissipate energy under external forces,so the PVPx/PAM hydrogels exhibit good self-recovery properties and outperform chemically cross-linked PAM hydrogels in impact resistance and damping applications.It is believed that the PVPx/PAM hydrogels with hydrogen-bonding induced phase separation possess more potential application prospects.

关键词： Tough Semi-interpenetrating networks Polyvinylpyrrolidone/polyacrylamide Hydrogels Phase separation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

In-situ imaging electrocatalysis in a solid-state Li-o_(2) battery with CuSe nanosheets as air cathode

引用

Chinese Chemical Letters 2024年第5期35卷 466-470页

作者： Peng Jia Yunna Guo Dongliang Chen Xuedong Zhang Jingming Yao Jianguo Lu Liqiang Zhang Hebei key laboratory of Applied Chemistry College of Environmental and Chemical EngineeringYanshan UniversityQinhuangdao 066004China Clean Nano Energy Center State Key Laboratory of Metastable Materials Science and TechnologyYanshan UniversityQinhuangdao 066004China state key laboratory of Silicon and Advanced Semiconductor materials School of Materials Science and EngineeringZhejiang UniversityHangzhou 310058China key laboratory of Low Dimensional materials and Application Technology of Ministry of Education School of Materials Science and EngineeringXiangtan UniversityXiangtan 411105China

The development of highly efficient catalysts in the cathodes of rechargeable Li-o_(2) batteries is a considerable challenge.To enhance the electrochemical performance of the Li-o_(2) battery,it is essential to choose a suitable catalyst material.Copper selenide(CuSe)is considered as a more promising cathode catalyst material for Li-o_(2) battery due to its better conductivity and rich electrochemical active sites.However,its electrochemical reaction and fundamental catalytic mechanism remain unclear till now.Herein,in-situ environmental transmission electron microscopy technique was used to study the catalysis mechanism of the CuSe nanosheets in Li-o_(2) batteries during discharge and charge processes.It is found that Li_(2)o was formed and decomposed around the ultrafine-grained Cu during the discharge and charge processes,respectively,demonstrating excellent cycling.This indicate that the freshly formed ultrafine-grained Cu in the conversion reaction catalyzed the latter four-electron-transfer oxygen reduction reaction,leading to the formation of Li_(2)o.our study provides important understanding of the electrochemistry of the Lio_(2) nanobatteries,which will aid the development of high-performance Li-o_(2) batteries for energy storage applications.

关键词： In-situ environmental transmission electron microscopy Lithium oxygen batteries CuSe nanosheets oxygen reduction reaction oxygen evolution reaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：