检索结果-南通市图书馆

Regeneration of photovoltaic industry silicon waste toward high-performance lithium-ion battery anode

在线全文

学校读者我要写书评

暂无评论

Rare metals 2024年第10期43卷 4948-4960页

作者： Kai Wang Xiao-Bin Zhong Yue-Xian Song Yao-Hui Zhang Yan-Gang Zhang Xiao-Gang You Pu-Guang Ji Kurbanov Mirtemir Shodievich Umedjon Khalilov Gong-Kai Wang Xin Zhang Xing-Liang Yao Feng Li Jun-Fei Liang Hua Wang School of Energy and Power Engineering North University of China Zhongyuan Critical metals Laboratory Zhengzhou University Tianjin Key Laboratory of Materials Laminating Fabrication and Interface Control Technology School of Material Science and EngineeringHebei University of Technology Arifov Institute of Ion-Plasma and Laser technologies Academy of Sciences of the Republic of Uzbekistan New Uzbekistan University Arifov Institute of Ion-Plasma and Laser technologies Academy of Sciences of Uzbekistan University of Antwerp School of Chemistry Beihang University

The diamond-wire sawing silicon waste（DWSSW） from the photovoltaic industry has been widely considered as a low-cost raw material for lithium-ion battery silicon-based electrode,but the effect mechanism of impurities presents in DWSSW on lithium storage performance is still not well understood;meanwhile,it is urgent to develop a strategy for changing DWSSW particles into high-performance electrode *** this work,the occurrence state of impurities presents in DWSSW was carefully analyzed using in situ Ar ion etching technology Then,the novel Si@C@SiOx@PAl-NDC composite was designed through in situ encapsulation *** obtained Si@C@SiOx@PAl-NDC electrode shows a high first capacity of 2343.4 mAh·g-1with an initial Coulombic efficiency （ICE） of 84.4%under current density of 1.0 A·g-1,and can deliver an impressive capacity of 984.9 mAh·g-1after 200 *** numerical simulation modeling calculations,the increase in proportion of Si4+/Si0and Si3+/Si0valence states in SiOxlayer leads to a decrease in von Mises stress,which ultimately improves the cycling structural ***,the porous 2D-3D aluminum/nitrogen （Al/N） co-doped carbon layer and nanowires on SiOxlayer can provide abundant active sites for lithium storage due to its developed hierarchical pores structure,which facilitates ion transport What is more,the performance of Si@C@SiOx@PAl-NDC//LiFePO4full cell shows its great potential in practical application.

关键词： Aluminum/nitrogen co-doped In situ encapsulation Lithium-ion batteries Porous carbon nanowires Sawing silicon waste

Leaching of the residue from the dry off-gas de-dusting and desulfurization process of an iron ore sinter plant

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2015年第2期22卷 116-121页

作者： Christof Lanzerstorfer Qi Xu Robert Neuhold School of Engineering/Environmental Sciences University of Applied Sciences Upper Austria siemens vai metals technologies GmbH

The residue from a second-stage dry sinter plant off-gas cleaning process contains both the fine dust from the sinter plant and the sorbent used. Recycling of the material that is usually handled by landfills to the sinter plant feed is not possible because of its chloride con- tent. Leaching of the chlorides allow the recycling of remaining solids. The saline leachate produced contains some heavy metals and must be treated before it is discharged into the sea. In laboratory experiments, leaching tests with the subsequent treatment of the leachate were con- ducted. After the process was optimized, all heavy-metal concentrations were below the permissible values. The optimum treatment condi- tions for heavy-metal precipitation were observed to be the filtration of the suspended solids followed by the dosing of liquid with lime milk （pH 10） and the subsequent precipitation using sodium sulfide.

关键词： heavy metals off-gas cleaning recycling residues leaching sinter plants

Synthesis,crystal structure and photo-physical properties of tris(4-methyl-2,5-diphenylpyridine)iridium for OLED

在线全文

学校读者我要写书评

暂无评论

贵金属 2024年第3期45卷 28-32页

作者： FENG Yangyang XU Mingming WANG Hongyou ZHU Yunyao LUO Yuan LEI Huaidong CHEN Honglai Sino-Platinum metals Chemical(Yunnan)Co.Ltd. State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum MetalsSino-Platinum Metals Co.Ltd.Kunming 650106China

Organic light-emitting diodes(OLEDs)have important applications in the field of next-generation displays and lighting,and phosphorescent iridium complexes are an important class of electroluminescent phosphorescent *** this paper,Ir(bmppy)_(3),tris(4-methyl-2,5-diphenylpyridine)iridium,was synthesized and elvaluted for photo-physical *** crystals suitale for X-ray diffraction(XRD)were grown from a mixture solvent of dichloromethane and absolute *** composition and structur of Ir(bmppy)_(3)were determined by element analysis,NMR spectra and *** complex crystallizes in the monoclinic symmetry with the space group P21/c with a slightly distorted octahedral *** measured by UV-Visible and photoluminescence spectra,Ir(bmppy)_(3) displays a maximum emission at at 527 nm at ambient temperature,a typical green-emitting *** complex has potential for application in the OLED industry.

关键词： OLED iridium complex phosphorescent material crystal structure photo-physical properties Ir(bmppy)_(3)

Interaction of edge dislocations with voids in tungsten

在线全文

学校读者我要写书评

暂无评论

Tungsten 2024年第3期6卷 633-646页

作者： Arseny Kazakov Rita I.Babicheva Aleksandr Zinovev Dmitry Terentyev Kun Zhou Elena A.Korznikova Sergey V.Dmitriev Research Laboratory for metals and Alloys under Extreme Impacts Ufa University of Science and Technology Institute for metals Superplasticity Problems of RAS School of Mechanical and Aerospace Engineering Nanyang Technological University Institute for Nuclear Energy Technology Belgian Nuclear Research Center Technological Machines and Equipment Department Ufa State Petroleum Technological University Institute of Mechanical Science Problems of RAS Institute of Molecule and Crystal Physics UFRC of Russian Academy of Sciences

Tungsten is widely used as a material capable of withstanding extreme operating conditions and is one of the candidates for use in fusion and Generation Ⅳ fission *** modelling implemented to solve various material science problems is an indispensable approach for improving material *** work analyzes the interaction of an edge dislocation with a void in single-crystal tungsten with the help of molecular dynamics *** different approaches for studying the dynamics of dislocations in tungsten that differ in boundary conditions are *** interactions of the dislocation and void at different temperatures are investigated,and based on the obtained stress-strain curves,the dislocation obstacle strength for voids having various diameters is *** is shown that when applied to a crystal with small voids,the model with the fixed boundary conditions returns incorrect ***,the influence of the cell size for the model with periodic boundary conditions is analyzed,and the case of a non-central interaction of a dislocation with a void is *** obtained results improve our understanding of the mechanical response of irradiated materials.

关键词： Tungsten Molecular dynamics method Dislocations Voids Boundary conditions

Review and prospects on the low-voltage Na_(2)Ti_(3)O_(7) anode materials for sodium-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 446-460,I0011页

作者： Jun Dong Yalong Jiang Ruxing Wang Qiulong Wei Qinyou An Xiaoxing Zhang Hubei Key Laboratory for High-efficiency Utilization of Solar Energy and Operation Control of Energy Storage System Hubei University of TechnologyWuhan 430068HubeiChina State Key Laboratory of New Textile Materials and Advanced Processing technologies Wuhan Textile UniversityWuhan 430200HubeiChina Xiamen Key Laboratory of High-Performance metals and Materials College of MaterialsXiamen UniversityXiamen 361005FujianChina State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina

Due to its low cost and natural abundance of sodium,Na-ion batteries(NIBs)are promising candidates for large-scale energy storage *** development of ultralow voltage anode materials is of great significance in improving the energy density of ***-voltage anode materials,however,are severely lacking in *** all the reported insertion oxides anodes,the Na_(2)Ti_(3)O_(7) has the lowest operating voltage(an average potential of 0.3 V ***^(+)/Na)and is less likely to deposit sodium,which has excellent potential for achieving NIBs with high energy densities and high *** significant progress has been made,achieving Na_(2)Ti_(3)O_(7) electrodes with excellent performance remains a severe *** paper systematically summarizes and discusses the physicochemical properties and synthesis methods of Na_(2)Ti_(3)O_(7).Then,the sodium storage mechanisms,key issues and challenges,and the optimization strategies for the electrochemical performance of Na_(2)Ti_(3)O_(7) are classified and further ***,remaining challenges and future research directions on the Na_(2)Ti_(3)O_(7) anode are *** review offers insights into the design of high-energy and high-safety NIBs.

关键词： Sodium-ion batteries Low-voltage anode materials Na_(2)Ti_(3)O_(7) Electrochemical performances Electrochemical mechanism

Carbon-coated hybrid crystals with fast electrochemical reaction kinetics for ultra-stable and high-load sodium-ion batteries

在线全文

学校读者我要写书评

暂无评论

Rare metals 2024年第2期43卷 647-657页

作者： Chuan Ou Ming-Dong Tan Zhen-Bang Li Zhao-Jie Li Fei Tian Zheng-Ping Qiao Dan-Ni Lei Cheng-Xin Wang State Key Laboratory of Optoelectronic Materials and technologies School of Materials Science and EngineeringSun Yat-Sen UniversityGuangzhou510275China

Owing to its high theoretical capacity and low cost,Sn has attracted significant attention in sodium-ion ***,the slow kinetics of electrochemical reactions and the rapid decay of capacity resulting from drastic changes in the volume of Sn,as well as persistent side reactions between Sn and the organic electrolyte during the(de)sodium process,have limited its *** improve the electrochemical performance of Sn-based materials,the bottom-up method is normally used to prepare carbon-coated ***,its complex preparation processes and harsh conditions make it unsuitable for practical ***,a carbon-coated hybrid crystal composite(Sn/SnO_(x)@C)was prepared using an up-bottom method with commercial Sn/SnO *** effects accelerate the electrochemical kinetics and inhibit the coarsening of Sn *** Sn/SnO_(x)@C composite electrode exhibited capacity retention of 80.7%even after approximately 1000 cycles(360.4 mAh·g^(−1)) at a current density of 1 A·g^(−1).The high-load Na_(3)V_(2)(PO4)3||Sn/SnO_(x)@C full cell presents a capacity retention rate of 91.7%after 150 cycles at the current density of 0.5 A·g^(−1).This work may significantly accelerate the commercialization of the Sn/SnO_(x)@C composite in sodium-ion batteries with high energy density.

关键词： Sodium-ion batteries(SIBs) Sn-based anode Ultraviolet curing Up-bottom method

Preventing formation of intermetallic compounds in ultrasonic-assisted Sn soldering of Mg/Al alloys through pre-plating a Ni coating layer on the Mg substrate

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 726-741页

作者： Yingzong Liu Yuanxing Li Hui Chen Zongtao Zhu Key Laboratory of Advanced technologies of Materials Ministry of EducationSchool of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031PR China

Magnesium and aluminum alloys are widely used in various industries because of their excellent properties,and their reliable connection may increase application of *** compounds(IMCs)affect the joint performance of Mg/*** this study,AZ31 Mg alloy with/without a nickel(Ni)coating layer and 6061 Al alloy were joined by ultrasonic-assisted soldering with Sn-3.0Ag-0.5Cu(SAC)*** effects of the Ni coating layer on the microstructure and mechanical properties of Mg/Al joints were systematically *** Ni coating layer had a significant effect on formation of the Mg_(2)Sn IMC and the mechanical properties of Mg/Al *** blocky Mg_(2)Sn IMC formed in the Mg/SAC/Al joints without a Ni coating *** content of the Mg_(2)Sn IMC increased with increasing soldering temperature,but the joint strength *** joint without a Ni coating layer fractured at the blocky Mg_(2)Sn IMC in the solder,and the maximum shear strength was 32.2 *** pre-plating Ni on the Mg substrate,formation of the blocky Mg_(2)Sn IMC was inhibited in the soldering temperature range 240–280℃and the joint strength ***,when the soldering temperature increased to 310℃,the blocky Mg_(2)Sn IMC precipitated again in the *** electron microscopy showed that some nano-sized Mg_(2)Sn IMC and the(Cu,Ni)_(6)Sn_(5)phase formed in the Mg(Ni)/SAC/Al joint soldered at 280℃,indicating that the Ni coating layer could no longer prevent diffusion of Mg into the solder when the soldering temperature was higher than 280℃.The maximum shear strength of the Mg(Ni)/SAC/Al joint was 58.2 MPa for a soldering temperature of 280℃,which was 80.7%higher than that of the Mg/SAC/Al joint,and the joint was broken at the Mg(Ni)/SAC ***-plating Ni is a feasible way to inhibit formation of IMCs when joining dissimilar metals.

关键词： Ultrasonic-assisted soldering Mg_(2)Sn Ni coating layer Shear strength

The dynamic surface evolution of halide perovskites induced by external energy stimulation

在线全文

学校读者我要写书评

暂无评论

National Science Review 2024年第4期11卷 185-194页

作者： Feiyu Cheng Pengdong Wang Chenzhe Xu Qingliang Liao Suicai Zhang Haochun Sun Wenqiang Fan Guodong Liu Zhiyun Li Yaping Kong Li Wang Fangsen Li Zhuo Kang Yue Zhang Academy for Advanced Interdisciplinary Science and Technology State Key Laboratory for Advanced Metals and Materials University of Science and Technology Beijing Beijing Key Laboratory for Advanced Energy Materials and technologies Key Laboratory of Advanced Materials and Devices for Post-Moore ChipsMinistry of EducationBeijing Advanced Innovation Center for Materials Genome Engineering School of Materials Science and EngineeringUniversity of Science and Technology Beijing Vacuum Interconnected Nanotech Workstation(Nano-X) Suzhou Institute of Nano-Tech and Nano-BionicsChinese Academy of Sciences Beijing National Laboratory for Condensed Matter Physics Institute of Physics Chinese Academy of Sciences

Tracking the dynamic surface evolution of metal halide perovskite is crucial for understanding the corresponding fundamental principles of photoelectric properties and intrinsic instability. However, due to the volatility elements and soft lattice nature of perovskites, several important dynamic behaviors remain unclear. Here, an ultra-high vacuum（UHV） interconnection system integrated by surface-sensitive probing techniques has been developed to investigate the freshly cleaved surface of CH3NH3PbBr3in situ under given energy stimulation. On this basis, the detailed three-step chemical decomposition pathway of perovskites has been clarified. Meanwhile, the evolution of crystal structure from cubic phase to tetragonal phase on the perovskite surface has been revealed under energy stimulation. Accompanied by chemical composition and crystal structure evolution, electronic structure changes including energy level position,hole effective mass, and Rashba splitting have also been accurately determined. These findings provide a clear perspective on the physical origin of optoelectronic properties and the decomposition mechanism of perovskites.

关键词： metal halide perovskite external energy stimulation surface dynamic evolution surface electronic structure ultra-high vacuum interconnection system

A mini review on the separation of Al,Fe and Ti elements from coal fly ash leachate

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Coal Science & Technology 2024年第2期11卷 1-15页

作者： Yuan Shi Fengqi Jiang Rongjiao Wang Sasha Yang Xiaofeng Zhu Yingying Shen State Key Laboratory of Advanced Processing and Recycling of Nonferrous metals School of Material Science and EngineeringLanzhou University of TechnologyLanzhou 730050China Department of Chemical and Biological Engineering Monash UniversityWellington RoadClaytonMelbourneVIC 3800Australia

The electricity demand is increasing rapidly with the development of society and ***-fired thermal power plants have become one of the primary sources of electricity generation for ***,coal-fired thermal power plants produce a great amount of by-product coal fly ash every *** fly ash disposal in landfills requires a sizable space and has negative environmental ***,it is crucial to develop new technologies and methods to utilize this enormous volume of solid waste in order to protect the *** this review,the fundamental physical and chemical character-istics of coal fly ash are introduced,and afterward the disposal policies and utilization ways of coal fly ash are discussed to gain a comprehensive understanding of the various ways this *** leaching of valuable metals in coal fly ash and the extraction of metal elements in leachate under different conditions are also ***,the possibility of coal fly ash to serve as a supplementary source for mineral resources is analyzed,providing a basis for its extensive use as a raw material in the metal industry in China and worldwide.

关键词： Coal fly ash Waste utilization metals extraction