检索结果-南通市图书馆

Robust interface and excellent as-built mechanical properties of Ti–6Al–4V fabricated through laser-aided additive manufacturing with powder and wire

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 154-168页

作者： Fei Weng Guijun Bi Youxiang Chew Shang Sui Chaolin Tan Zhenglin Du Jinlong Su Fern Lan Ng key laboratory for Liquid-Solid Structural Evolution and Processing of materials Ministry of EducationShandong Engineering&Technology Research Center for Superhard MaterialSchool of Materials Science and EngineeringShandong UniversityJinan 250061China Institute of Intelligent Manufacturing Guangdong Academy of SciencesGuangzhou 510095China Singapore Institute of Manufacturing Technology 5 Cleantech Loop636732Singapore

The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),*** the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire *** characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α *** mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and *** mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace material Specifications(AMS 6932)even without post heat *** fracture occurred within the interfacial area,further suggesting the robust *** findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.

关键词： laser-aided additive manufacturing powder deposition wire deposition interfacial characteristic mechanical behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An Unprecedented Efficiency with Approaching 21%Enabled by Additive‑Assisted Layer‑by‑Layer Processing in Organic Solar Cells

引用

Nano-Micro Letters 2025年第2期17卷 372-375页

作者： Shuai Xu Youdi Zhang Yanna Sun Pei Cheng Zhaoyang Yao Ning Li Long Ye Lijian Zuo Ke Gao key laboratory of Advanced Green Functional materials College of ChemistryChangchun Normal UniversityChangchun 130032People’s Republic of China shandong Provincial key laboratory for Science of material Creation and Energy Conversion School of Chemistry and Chemical EngineeringShandong UniversityQingdao 266237People’s Republic of China College of Polymer Science and Engineering Sichuan UniversityChengdu 610065People’s Republic of China State key laboratory and Institute of Elemento‑Organic Chemistry Centre of Nanoscale Science and Technology and Key Laboratory of Functional Polymer MaterialsRenewable Energy Conversion and Storage Center(RECAST)College of ChemistryNankai UniversityTianjin 300071People’s Republic of China Institute of Polymer Optoelectronic materials and Devices State key laboratory of Luminescent materials and Devices South China University of TechnologyGuangzhou 510640People’s Republic of China Tianjin key laboratory of Molecular Optoelectronic Sciences School of Materials Science and EngineeringTianjin UniversityTianjin 300350People’s Republic of China State key laboratory of silicon materials MOE Key Laboratory of Macromolecular Synthesis and FunctionalizationDepartment of Polymer Science and EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China

Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer *** optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture *** approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.

关键词： Organic solar cells Additive-assisted layer-by-layer processing Three-dimensional fibril morphology Bulk p-i-n structure Optical management

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Flexible Graphene Field‑Effect Transistors and Their Application in Flexible Biomedical Sensing

引用

Nano-Micro Letters 2025年第2期17卷 252-313页

作者： Mingyuan Sun Shuai Wang Yanbo Liang Chao Wang Yunhong Zhang Hong Liu Yu Zhang Lin Han Institute of Marine Science and Technology Shandong UniversityQingdao 266237ShandongPeople’s Republic of China State key laboratory of Crystal materials Shandong UniversityJinan 250100ShandongPeople’s Republic of China School of Integrated Circuits Shandong UniversityJinan 250100ShandongPeople’s Republic of China shandong Engineering Research Center of Biomarker and Artificial Intelligence Application Jinan250100ShandongPeople’s Republic of China

Flexible electronics are transforming our lives by making daily activities more *** to this innovation are field-effect transistors(FETs),valued for their efficient signal processing,nanoscale fabrication,low-power consumption,fast response times,and ***,known for its exceptional mechanical properties,high electron mobility,and biocompatibility,is an ideal material for FET channels and *** combination of graphene and FETs has given rise to flexible graphene field-effect transistors(FGFETs),driving significant advances in flexible electronics and sparked a strong interest in flexible biomedical ***,we first provide a brief overview of the basic structure,operating mechanism,and evaluation parameters of FGFETs,and delve into their material selection and patterning *** ability of FGFETs to sense strains and biomolecular charges opens up diverse application *** specifically analyze the latest strategies for integrating FGFETs into wearable and implantable flexible biomedical sensors,focusing on the key aspects of constructing high-quality flexible biomedical ***,we discuss the current challenges and prospects of FGFETs and their applications in biomedical *** review will provide valuable insights and inspiration for ongoing research to improve the quality of FGFETs and broaden their application prospects in flexible biomedical sensing.

关键词： Flexible Graphene Field-effect transistor Wearable Implantable Biosensor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Universal design of three-dimensional porous graphene-iron based promotors for kinetically rationalized lithium-sulfur chemistry

引用

Journal of Energy Chemistry 2025年第1期100卷 192-200页

作者： Hua Gao Yunfeng Zhang Menglei Wang Ruoxuan Yang Shuai Feng Xuan Cao Yaping Zhang Zhongyuan Lu Yingze Song State key laboratory of Environment-Friendly Energy materials School of Materials and Chemistry Southwest University of Science and Technology School of material Science and Engineering Henan University of Technology College of Chemistry and Chemical Engineering Taishan University

Lithium-sulfur （Li-S） batteries are widely deemed to be one of the most potential candidates for future secondary batteries because of their remarkable energy ***,notorious polysulfide shuttling and retarded sulfur reaction kinetics pose significant obstacles to the further application of Li-S *** rationally designed highly active electrocatalysts can facilitate polysulfide conversion,the universal and scalable synthesis strategies need to be ***,a universal synthetic strategy to construct a series of three-dimensional （3D） porous graphene-iron （3DGr-Fe） based electrocatalysts involving 3DGr-FeP,3DGr-Fe3C,and 3DGr-Fe3Se4is exploited for manipulating the Li-S redox *** has been observed that the implementation of a 3D porous Gr architecture leads to the well-designed conductive networks,while the uniformly dispersed iron nanoparticles introduce an abundance of active sites,fostering the lithium polysulfide conversion,thereby bolstering the overall electrochemical *** Li-S battery with the 3DGr-Fe based electrocatalyst exhibits remarkable capacity retention of 94.8%upon 100 times at 0.2 ***,the soft-packaged Li-S pouch cell based on such a 3DGr-Fe electrocatalyst delivers superior capacity of 1060.71 mA h g-1and guarantees for the continuous 30 min work of fan *** investigation gives comprehensive insights into the design,synthesis,and mechanism of 3DGr-Fe based electrocatalysts with high activity toward efficient and durable Li-S batteries.

关键词： Lithium-sulfur battery Universal synthesis 3D graphene-iron based promotor Electrocatalysis

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Amine-functionalized mesoporous UiO-66 aerogel for CO_(2) adsorption

引用

Chinese Journal of Chemical Engineering 2023年第2期54卷 36-43页

作者： Mengge Shang Jing Zhang Jinqiang Sun Shimo Yu Feng Hua Xiaoxu Xuan Xun Sun Serguei Filatov Xibin Yi shandong key laboratory for special silicon-containing material Advanced Materials InstituteQilu University of Technology(Shandong Academy of Sciences)Jinan 250014China key laboratory of High Efficiency and Clean Mechanical Manufacture Ministry of EducationNational Demonstration Center for Experimental Mechanical Engineering Education at Shandong UniversitySchool of Mechanical EngineeringShandong UniversityJinan 250061China laboratory of Hydrogen Energy Institute of Heat and Mass Transfer of the National Academy of Sciences of BelarusMinsk 220072Belarus

A mesoporous UiO-66-NH_(2) aerogel is prepared via a straightforward sol-gel method without using any binders or mechanical pressures, in which the amine groups are directly introduced into the matrix by using 2-aminoterephthalic acid. The novel UiO-66-NH_(2) aerogel also exhibits high specific surface area and mesopore-dominated structure, implying its highly potential use in CO_(2) adsorption. For ulteriorly investigating the effect of amine loading on the CO_(2) adsorption ability, a series of UiO-66-NH_(2) aerogel with different amino content is fabricated by changing the ligand/metal molar ratio. When the molar ratio is 1.45, the CO_(2) adsorption capacity reaches the optimum value of 2.13 mmol·g^(-1) at 25 ℃ and 0.1 MPa, which is 12.2% higher than that of pure UiO-66 aerogel. Additionally, UiO-66-NH_(2)-1.45 aerogel also has noticeable CO_(2) selectivity against N_(2) and CH_(4) as well as good regeneration stability. Such results imply that it has good application prospect in the field of CO_(2) adsorption, and also contains the potential to be applied in catalysis, separation and other fields.

关键词： UiO-66-NH_(2)aerogel Sol–gel method Amine groups Nanostructure Carbon dioxide Adsorption

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Exercise preconditioning alleviates ischemia-induced memory deficits by increasing circulating adiponectin

引用

Neural Regeneration Research 2025年第5期20卷 1445-1454页

作者： Meifeng Zheng Borui Zhang Sonata S Y Yau Kwok-Fai So Li Zhang Haining Ou Department of Rehabilitation Medicine Guangzhou Medical UniversityGuangzhouGuangdong ProvinceChina Department of Rehabilitation Medicine The Fifth Clinical College of Guangzhou Medical UniversityGuangzhouGuangdong ProvinceChina key laboratory of CNS Regeneration(Ministry of Education) Guangdong-Hong Kong-Macao Institute of CNS RegenerationJinan UniversityGuangzhouGuangdong ProvinceChina Department of Rehabilitation Sciences The Hong Kong Polytechnic UniversityHong Kong Special Administrative RegionChina State key laboratory of Brain and Cognitive Science Li Ka Shing Faculty of MedicineThe University of Hong KongHong Kong Special Administrative RegionChina Center for Exercise and Brain Science School of PsychologyShanghai University of SportShanghaiChina Neuroscience and Neurorehabilitation Institute University of Health and Rehabilitation SciencesQingdaoShandong ProvinceChina

Cerebral ischemia is a major health risk that requires preventive approaches in addition to drug *** exercise enhances neurogenesis and synaptogenesis,and has been widely used for functional rehabilitation after *** this study,we determined whether exercise training before disease onset can alleviate the severity of cerebral *** also examined the role of exercise-induced circulating factors in these *** mice were subjected to 14 days of treadmill exercise training before surgery for middle cerebral artery *** found that this exercise pre-conditioning strategy effectively attenuated brain infarct area,inhibited gliogenesis,protected synaptic proteins,and improved novel object and spatial memory *** analysis showed that circulating adiponectin plays a critical role in these preventive effects of *** activation of adiponectin receptors by Adipo Ron mimicked the effects of exercise,while inhibiting receptor activation abolished the exercise *** summary,our results suggest a crucial role of circulating adiponectin in the effects of exercise pre-conditioning in protecting against cerebral ischemia and supporting the health benefits of exercise.

关键词： adiponectin cerebral ischemia exercise pre-conditioning hippocampus memory function middle cerebral artery occlusion prefrontal cortex synaptic proteins treadmill exercise

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

SYNTHESIS AND PROPERTIES OF SULFONATED POLY(ARYLENE ETHER) containing TRIPHENYL METHANE MOIETIES FROM ISOCYNATE MASKED BISPHENOL

引用

Chinese Journal of Polymer Science 2007年第4期25卷 419-426页

作者：王雷 College of material Science Shenzhen University and Shenzhen Key Laboratory of Special Functional Materials

A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.

关键词： Sulfonated poly(arylene ether)s Proton-exchange membrane Conductivity.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The electronic structures, Born effective charge tensors,and phonon properties of cubic, tetragonal,orthorhombic, and rhombohedral K_(0.5)Na_(0.5)NbO_3: A first-principles comparative study

引用

Chinese Physics B 2014年第12期23卷 390-397页

作者：周树兰赵显江向平韩晓东 Department of material Science and Engineering Jingdezhen Ceramics Institute State key laboratory of Crystal material Institute of Crystal Material Shandong University

The electronic structures, Born effective charges（BECs）, and full phonon dispersions of cubic, tetragonal, orthorhombic, and rhombohedral K0.5Na0.5Nb O3 are investigated by the first principles method based on density functional *** hybridized states of Nb 4d and O 2p states are observed in the valence band, showing the formation of a strong Nb–O covalent bond which should be responsible for the displacement of Nb and O atoms. The abnormally large BECs of Nb and O indicate the possibility of phase instability induced by the off-center displacement of Nb and O atoms. The phonon dispersions reveal that the ferroelectric instability of K0.5Na0.5Nb O3 is dominated by Nb and O displacements with significant Na characteristics. In addition to the ferroelectric instability, there is also rotational instability coming from the oxygen octahedra rotation around one axis. Moreover, the Γ phonon properties of orthorhombic KNb O3, Na Nb O3, and K0.5Na0.5Nb O3 are also studied in detail.

关键词： Born effective charge phonon dispersion density functional theory(DFT) phase instability of K0.5Na0.5NbO3

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Comparison of entanglement trapping among different photonic band gap models

引用

Chinese Physics B 2013年第9期22卷 252-257页

作者：张英杰杨秀芹韩伟夏云杰 key laboratory of Laser Polarization and Information Technology of shandong Province Department of PhysicsQufu Normal University State key laboratory of Crystal material Shandong University

We investigate the roles of different qubit-environment decoherence models on the entanglement trapping of two qubits. By considering three environmental models （the single photonic band gap model, the common photonic band gap model, and the two independent photonic band gaps model）, we note that the final values of entanglement trapping are determined by these different models. We also give the conditions of obtaining the larger entanglement trapping by comparing two-qubit entanglement dynamics in different decoherence models. Moreover, the comparison of entanglement trapping between two Bell-like states in the same decoherence model are also carried out.

关键词： entanglement trapping quantum decoherence photonic band gap pseudomode method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Formation mechanism of intragranular structure in nano-composites

引用

中国有色金属学会会刊：英文版 2004年第2期14卷 265-269页

作者：王昕单妍龚红宇于薛刚徐静尹衍升 Institute of material Science and Engineering key laboratory for Engineering Ceramics of shandong Province

The effect of sintering process and ZrO2 contents on formation of intragranular ZrO2 in Al2O3 matrix was investigated with α-Al2O3 micro-powders and ZrO2 nano-powders as original materials. It is found that the second-phase particles coalesce with the growth of matrix grains during sintering. The process conditions that benefit the growth of matrix grains benefit the formation of intragrains. The formation procedure of intragrains could be described as follows. At first, the particles are driven to agglomerate during densification of the matrix . Some particles move along with the migration of the matrix grain boundaries and tend to further gather, then become intergrains. Those gripped between the matrix grain boundaries become intragrains during the growth of matrix grains.

关键词：氧化物陶瓷纳米复合材料晶体结构 Al2O3 ZrO2 成形机制

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：