检索结果-南通市图书馆

Rare Metals 2024年第10期43卷 5403-5409页

作者： Jian-Qiu Sun Yue Ma Chong Gao Hong-Yun Luo School of Materials science and engineering Beihang University Chinalco research institute of science and Technology

In order to improve the comprehensive mechanical properties,deep cryogenic treatment （DCT）prior to aging was carried out on friction-stir-welded（FSW） 2198 Al-Li alloy;afterward,the microstructure and tensile properties were characterized by means of optical microscopy （OM）,transmission electron microscopy（TEM） and tensile *** results show that FSW 2198 alloy through DCT prior to aging （DAT） possesses superior tensile properties than conventional aging treatment （AT）The microstructural analysis reveals that DAT alloy exhibits a finer grain structure,since DCT might effectively alleviate the residual stress in FSW 2198 alloy and thus decrease the driving force for grain coarsening in subsequent aging ***,DCT generates dislocation multiplication,which provides more preferential nucleation sites for T1 （Al2CuLi） phase during subsequent aging treatment,resulting in high-density fine T1 phases and thin precipitate-free zone within DAT *** reasonable microstructure leads to DAT alloy possessing better strength-ductility combination compared to AT alloy.

关键词： Al–Li alloy Deep cryogenic treatment Friction stir welding Tensile properties

Surface-phonon-polariton-enhanced photoinduced dipole force for nanoscale infrared imaging

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

National science Review 2024年第5期11卷 227-235页

作者： Jian Li Junghoon Jahng Xuezhi Ma Jing Liang Xue Zhang Qianhao Min Xiao-Liang Wang Shuangjun Chen Eun Seong Lee Xing-Hua Xia State Key Lab of Analytical Chemistry for Life science School of Chemistry and Chemical Engineering Nanjing University Hyperspectral Nano-Imaging Team Korea Research Institute of Standards and Science institute of Materials research and engineering Agency for ScienceTechnology and Research College of Materials science and engineering Nanjing Tech University

The photoinduced dipole force(Pi DF) is an attractive force arising from the Coulombic interaction between the light-induced dipoles on the illuminated tip and the sample. It shows extreme sample-tip distance and refractive index dependence, which is promising for nanoscale infrared(IR) imaging of ultrathin samples. However, the existence of Pi DF in the mid-IR region has not been experimentally demonstrated due to the coexistence of photoinduced thermal force(Pi TF), typically one to two orders of magnitude higher than Pi DF. In this study, we demonstrate that, with the assistance of surface phonon polaritons, the Pi DF of c-quartz can be enhanced to surpass its Pi TF, enabling a clear observation of Pi DF spectra reflecting the properties of the real part of permittivity. Leveraging the detection of the Pi DF of phonon polaritonic substrate, we propose a strategy to enhance the sensitivity and contrast of photoinduced force responses in transmission images, facilitating the precise differentiation of the heterogeneous distribution of ultrathin samples.

关键词： surface phonon polariton photoinduced dipole force nanoscale infrared imaging ultrathin sample

Influence of erbium addition on microstructure and performances of AlSi10Mg alloy prepared by selective laser melting

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第10期42卷 1988-1994页

作者： Bin Chen Fuzhu Wang Shiming Ren Peng Xia Zhipeng Wang Jianfei Hao Zhiping Chen Runxia Li Hongxiang Jiang research institute of Interdisciplinary science & School of Materials science and engineering Dongguan University of Technology College of Materials science and engineering Shenzhen University Shi-Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of Sciences School of Materials science and engineering University of Science and Technology of China

The effect of rare earth addition on the microstructure and mechanical performances of as-cast and wrought Al alloys has been attracting increasing attention *** earth addition has great potential in modifying the structure and improving the properties of ***,there are currently few reports about the effect of rare earth addition on the microstructure and performances of Al alloys prepared via selective laser ***,AlSi10Mg alloys were manufactured using selective laser melting,and the effect of Er addition was *** results indicate that Er addition leads toα-Al refinement and modifies the minority Si *** formation of the Al3Er phase induced by Er addition enhances the stren gth of the *** of the Si phase also increases *** strategy can help improve the mechanical performance of alum inum alloys prepared via selective laser melting.

关键词： Aluminum alloy Er Microstructure Rare earths Selective laser melting Tensile performance

Fe-Induced Electronic Transfer and Structural Evolution of Lotus Pod-Like CoNiFePx@P,N-C Heterostructure for Sustainable Oxygen Evolution

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第3期7卷 186-193页

作者： Xiaojun Zeng Qingqing Zhang Chulong Jin Hui Huang Yanfeng Gao Advanced Ceramic Materials research institute School of Materials Science and EngineeringJingdezhen Ceramic University Singapore institute of Technology School of Materials science and engineering Shanghai University

Transition metal phosphides with metallic properties are a promising candidate for electrocatalytic water oxidation,and developing highly active and stable metal phosphide-based oxygen evolution reaction catalysts is still ***,we present a facile ion exchange and phosphating processes to transform intestine-like CoNiPx@P,N-C into lotus pod-like CoNiFePx@P,N-C heterostructure in which numerous P,N-codoped carboncoated CoNiFePxnanoparticles tightly anchors on the 2D carbon ***,the as-prepared CoNiFePx@P,N-C enables a core-shell structure,high specific surface area,and hierarchical pore structure,which present abundant heterointerfaces and fully exposed active ***,the incorporation of Fe can also induce electron transfer in CoNiPx@P,IM-C,thereby promoting the oxygen evolution ***,CoNiFePx@P,IM-C delivers a low overpotential of 278 mV （vs RHE） at a current density of10 mA cm-1and inherits excellent long-term stability with no observable current density decay after 30 h of chronoamperometry *** work not only highlights heteroatom induction to tune the electronic structure but also provides a facile approach for developing advanced and stable oxygen evolution reaction electrocatalysts with abundant heterointerfaces.

关键词： electronic transfer Fe exchange multi-metal phosphides OER electrocatalysts structural evolution

Combinations of electron and proton donors in transition-metal complex mediated nitrogen reduction reactions

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

science China Chemistry 2024年第7期67卷 2136-2154页

作者： Delong Han Li Yang Hao Huang Priyanka Chakraborty Shashikant U.Dighe Kuo-Wei Huang KAUST Catalysis Center and Division of Physical science and engineering King Abdullah University of Science and TechnologyThuwal 23955Saudi Arabia Agency for science Technologyand ResearchInstitute of Materials Research and Engineering and Institute of Sustainability for ChemicalsEnergy and EnvironmentSingapore 138634Singapore

Nitrogen fixation is a complex process involving the transfer of six electrons and *** from the conventional Haber-Bosch process,which relies on hydrogen(H_(2))to provide both electrons and protons to reduce nitrogen(N_(2)),homogeneous transition metal complex-catalyzed N_(2)reduction reactions(NRR)employ an array of electron and proton donors or even electron donors combined with *** the synthesis of diverse catalytic progress,the categories of donors have seen rapid ***,existing literature only provides summaries regarding the metal,ligands,and *** the significance of electron and proton donor combinations in nitrogen reduction reactions,no literature has thoroughly reviewed this ***,we hereby compiled a comprehensive list of commonly used reagents in N_(2)reduction and classified them according to their specific donor *** review presents clear and organized information about these combinations,along with a summary of their general performance trend in NRR with related ***,we conclude the discussion by highlighting key points for researchers to consider when selecting catalysts and donor combinations,with the ultimate goal of advancing the field of nitrogen fixation.

关键词： dinitrogen reduction reaction reducing donor combination transition metal complexes homogeneous catalysis

维普期刊数据库

Anticipating the lifespan: Predicting the durability of an anode-supported solid oxide fuel cell short stack over 50,000 h

在线全文

学校读者我要写书评

暂无评论

Progress in Natural science:Materials International 2024年第3期34卷 606-613页

作者： Muhammad Zubair Khan Amjad Hussain Seung-Bok Lee Tak-Hyoung Lim Rak-Hyun Song Department of Materials science & engineering Pak-Austria Fachhochschule: Institute of Applied Sciences and Technology Hydrogen Energy research Division Korea Institute of Energy Research Department of Advanced Energy and System engineering Korea University of Science and Technology (UST)

In the present study, the operational lifetime of a solid oxide fuel(SOFC) short stack is predicted by investigating the performance degradation of both the short stack and its cells throughout 1000 h at 800°C. The short stack and integral cell voltages are continuously measured during the long-term test, with electrochemical impedance spectroscopy(EIS) conducted every 200 h. The short stack voltage decreased rapidly for the initial 200–300 h and afterwards, it decreased at a slow rate due to the increase in the Ohmic and polarization resistances in the same manner. Scanning electron microscopy results show that there is no delamination or cracking among constituent layers of the short-stack cells. The single degradation effects of the Ni coarsening in the anode, cation migration and surface segregation in cathode and oxide scale growth in metallic interconnect mesh are successfully integrated into a comprehensive lifetime prediction model. The experimentally measured voltage degradation data of the short stack fits well with the developed mathematical model and allows the successful prediction of the lifetime up to 50,000 h.

关键词： Degradation Impedance Lifetime SOFC Stack

Displacement-pressure biparametrically regulated softness sensory system for intraocular pressure monitoring

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

National science Review 2024年第6期11卷 159-168页

作者： Yu Cheng Yifei Zhan Fangyi Guan Junli Shi Jingxiao Wang Yi Sun Muhammad Zubair Cunjiang Yu Chuan Fei Guo Department of Materials science and engineering Southern University of Science and Technology Department of engineering science and Mechanics Pennsylvania State University Department of Biomedical engineering Pennsylvania State University Department of Materials science and engineering Materials Research Institute Pennsylvania State University

High intraocular pressure(IOP) is one of the high-risk pathogenic factors of glaucoma. Existing methods of IOP measurement are based on the direct interaction with the cornea. Commercial ophthalmic tonometers based on snapshot measurements are expensive, bulky, and their operation requires trained *** contact lenses are easy to use, but they may block vision and cause infection. Here, we report a sensory system for IOP assessment that uses a soft indentor with two asymmetrically deployed iontronic flexible pressure sensors to interact with the eyelid-eyeball in an eye-closed situation. Inspired by human fingertip assessment of softness, the sensory system extracts displacement-pressure information for soft evaluation, achieving high accuracy IOP monitoring(>96%). We further design and custom-make a portable and wearable ophthalmic tonometer based on the sensory system and demonstrate its high efficacy in IOP screening. This sensory system paves a way towards cost-effective, robust, and reliable IOP monitoring.

关键词： intraocular pressure tonometer deep learning softness iontronic sensor

Perspective on powder technology for all-solid-state batteries:How to pair sulfide electrolyte with high-voltage cathode

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第3期86卷 55-66页

作者： Jiangkui Hu Shijie Yang Yingying Pei Xilong Wang Yulong Liao Shuai Li Aolong Yue Jia-Qi Huang Hong Yuan School of Materials science&engineering Beijing Institute of TechnologyBeijing100081China Advanced research institute of Multidisciplinary science Beijing Institute of TechnologyBeijing100081China

Sulfide solid electrolytes(SEs)have attracted ever-increasing attention due to their superior roomtemperature ionic conductivity(~10^(-2) S cm^(-1)).Additionally,the integration of sulfide SEs and highvoltage cathodes is promising to achieve higher energy ***,the incompatible interfaces between sulfide SEs and high-voltage cathodes have been one of the key factors limiting their ***,this review presents a critical summarization of the interfacial issues in all-solid-state lithium batteries based on sulfide SEs and high-voltage cathodes and proposes strategies to stabilize the electrolyte/cathode ***,the future research direction of electrolyte/cathode interfaces and application prospects of powder technology in sulfide-based ASSLBs were also discussed.

关键词： Sulfide solid electrolytes High-voltage cathodes Electrode/electrolyte interfaces All-solid-state lithium batteries

Recent Advances in Patterning Strategies for Full‑Color Perovskite Light‑Emitting Diodes

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第3期16卷 99-137页

作者： Gwang Heon Lee Kiwook Kim Yunho Kim Jiwoong Yang Moon Kee Choi Graduate School of Semiconductor Materials and Devices engineering Center for Future Semiconductor Technology(FUST)Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Department of Energy science and engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Energy science and engineering research Center Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Department of Materials science and engineering Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Center for Nanoparticle research Institute for Basic Science(IBS)Seoul 08826Republic of Korea

Metal halide perovskites have emerged as promising light-emitting materials for next-generation displays owing to their remarkable material characteristics including broad color tunability,pure color emission with remarkably narrow bandwidths,high quantum yield,and solution *** recent advances have pushed the luminance efficiency of monochromic perovskite light-emitting diodes(PeLEDs)to their theoretical limits,their current fabrication using the spincoating process poses limitations for fabrication of full-color *** integrate PeLEDs into full-color display panels,it is crucial to pattern red–green–blue(RGB)perovskite pixels,while mitigating issues such as cross-contamination and reductions in luminous ***,we present state-of-the-art patterning technologies for the development of full-color ***,we highlight recent advances in the development of efficient ***,we discuss various patterning techniques of MPHs(i.e.,photolithography,inkjet printing,electron beam lithography and laserassisted lithography,electrohydrodynamic jet printing,thermal evaporation,and transfer printing)for fabrication of RGB pixelated *** patterning techniques can be classified into two distinct approaches:in situ crystallization patterning using perovskite precursors and patterning of colloidal perovskite *** review highlights advancements and limitations in patterning techniques for PeLEDs,paving the way for integrating PeLEDs into full-color panels.

关键词： Perovskite Light-emitting diode Full-color display High-resolution patterning Electroluminescence

维普期刊数据库

Peroxidase-like nanozyme based microenvironment-responsive injectable hydrogel for bacteria-infected wound healing

在线全文

学校读者我要写书评

暂无评论

science China Technological sciences 2024年第10期67卷 3247-3260页

作者： ZHOU Wei LI XiaNan TANG MengCheng PAN LingFeng WANG BeiBei ZHANG Hao ZHANG Han WANG ShiBo KONG XiangDong institute of Smart Biomaterial Materials School of Materials Science and EngineeringZhejiang University of Science & Technology Zhejiang-Mauritius Joint research Center for Biomaterials and Tissue engineering Zhejiang University of Science & Technology

Hydrogel stands out as one of the most attractive wound dressings due to its excellent moisturizing properties and capacity to absorb wound exudates. However, conventional hydrogel dressings often lack responsiveness to the microenvironment, merely acting as protective barriers for the wound. Consequently, they exhibit limited effectiveness in preventing infection and facilitating wound repair. To address these problems, we have developed a multifunctional injectable hydrogel, CF/MS@HG, based on peroxidase-like nanozymes, aiming at rapidly healing bacterial-infected wounds. The hydrogel is mainly composed of oxidized sodium alginate, aminated gelatin, and polylysine, encapsulating MIL-101(CuFe) NPs(CF) and manganese selenide nanoparticles(MnSe2NPs, or MS NPs). After injection, the complex rapidly gelatinizes at the infected wound site through a Schiff base reaction. In vitro experiments have demonstrated the hydrogel's strong adhesion and self-healing ***, CF exhibiting peroxidase(POD)-like activity, catalyzes in situ hydrogen peroxide(H2O2) to generate highly toxic hydroxyl radicals(·OH) within the wound microenvironment, inducing oxidative damage to bacteria. Meanwhile, MS decomposes into H2Se in the slightly acidic wound microenvironment, disrupting bacterial metabolism and inhibiting *** addition of polylysine further enhances the hydrogel's antibacterial properties. In vivo experiments have shown that the hydrogel exhibits excellent biological safety and significantly promotes wound healing. This multifunctional smart hydrogel holds great promise for the treatment of bacterial-infected wounds.

关键词： peroxidase-like nanozyme manganese selenide injectable hydrogel bacterial infection wound healing