检索结果-南通市图书馆

Enhancement of comprehensive properties of Nb-Si based in-situ composites by Ho rare earth doping

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4508-4520页

作者： Wei Wei Qi Wang Rui-Run Chen Chao-Wen Zheng Yan-Qing Su National Key laboratory for precision Hot Processing of Metals School of Materials Science and EngineeringHarbin Institute of TechnologyHarbin 150001China

This study examines the microstructure,mechanical properties(with a focus on room-temperature toughness),and oxidation resistance of Ho-doped NbDSi based in-situ *** base alloy consists of the coarse primary Nb_(5)Si_(3)phase and the Nb_(5)Si_(3)+Nbss(Nb solid solution)eutectic *** doping influences the solidification *** the Ho doping is higher than0.2 at%,the alloys transform into eutectic *** can be solid-solved in trace amounts in the Nbss ***,most of Ho forms a stable Ho oxide phase,which alleviates oxygen contamination problem to some ***,the interface separation between Ho oxide and other phases reduces the plastic deformation ***,with 0.4 at%Ho doping,the K_(Q)value is18.03 MPa·m^(1/2),which is 31.1%higher than that of the base *** strength of the Ho-doped alloys does not deteriorate with an increase in ***,the large network-like Ho_(2)O_(3)in the 0.8Ho alloy causes a decrease in toughness and *** addition,the Ho oxide phase effectively blocks the inward oxygen *** 0.8 at%Ho doping,the oxidation mass gain per unit area is 10.16 mg·cm^(2),which is 39.7%lower than that of the base alloy.

关键词： Nb-Si based composites Rare earth elements Ho Microstructure Properties

A novel integrated microfluidic chip for on-demand electrostatic droplet charging and sorting

在线全文

学校读者我要写书评

暂无评论

Bio-Design and manufacturing 2024年第1期7卷 31-42页

作者： Jinhui Yao Chunhua He Jianxin Wang Canfeng Yang Ye Jiang Zhiyong Liu Guanglan Liao Tielin Shi State Key laboratory of Intelligent manufacturing Equipment and Technology Huazhong University of Science and TechnologyWuhan 430074China

On-demand droplet sorting is extensively applied for the efficient manipulation and genome-wide analysis of individual ***,state-of-the-art microfluidic chips for droplet sorting still suffer from low sorting speeds,sample loss,and labor-intensive preparation ***,we demonstrate the development of a novel microfluidic chip that integrates droplet generation,on-demand electrostatic droplet charging,and high-throughput *** charging electrode is a copper wire buried above the nozzle of the microchannel,and the deflecting electrode is the phosphate buffered saline in the microchannel,which greatly simplifies the structure and fabrication process of the ***,this chip is capable of high-frequency droplet generation and sorting,with a frequency of 11.757 kHz in the drop *** chip completes the selective charging process via electrostatic induction during droplet ***-demand charged microdroplets can arbitrarilymove to specific exit channels in a three-dimensional(3D)-deflected electric field,which can be controlled according to user requirements,and the flux of droplet deflection is thereby significantly ***,a lossless modification strategy is presented to improve the accuracy of droplet deflection or harvest rate from 97.49% to 99.38% by monitoring the frequency of droplet generation in real time and feeding it back to the charging *** chip has great potential for quantitative processing and analysis of single cells for elucidating cell-to-cell variations.

关键词： Copper wire Droplet generation Droplet sorting Microfluidic chips On-demand charging

Study on 6-DOF active vibration-isolation system of the ultra-precision turning lathe based on GA-BP-PID control for dynamic loads

在线全文

学校读者我要写书评

暂无评论

Advances in manufacturing 2024年第1期12卷 33-60页

作者： Bo Wang Zhong Jiang Pei-Da Hu Department of precision Instrument Tsinghua UniversityBeijing100084People’s Republic of China Institute of Machinery manufacturing Technology China Academy of Engineering PhysicsMianyang621900SichuanPeople’s Republic of China

The vibration disturbance from an external environment affects the machining accuracy of ultra-precision machining *** active vibration-isolation systems(AVIS)have been developed based on static *** a vibration-isolation load changes dynamically during ultra-precision turning lathe machining,the system parameters change,and the efficiency of the active vibration-isolation system based on the traditional control strategy *** solve this problem,this paper proposes a vibration-isolation control strategy based on a genetic algorithm-back propagation neural network-PID control(GA-BP-PID),which can automatically adjust the control parameters according to the machining ***-isolation simulations and experiments based on passive vibration isolation,a PID algorithm,and the GA-BP-PID algorithm under dynamic load machining conditions were *** experimental results demonstrated that the active vibration-isolation control strategy designed in this study could effectively attenuate vibration disturbances in the external environment under dynamic load *** design is reasonable and feasible.

关键词： Ultra-precision diamond turning lathe Active vibration isolation Six degrees of freedom Dynamic load Genetic algorithm-back propagation neural network-PID(GA-BP-PID)control

Laser-assisted grinding of RB-SiC composites:Laser ablation behavior and mechanism

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第1期37卷 362-376页

作者： Zhigang DONG Wenchao SUN Xintong CAI Feng YANG Yan BAO Renke KANG Dongjiang WU Guangyi MA Fangyong NIU Key laboratory for precision and Non-traditional Machining Technology of the Ministry of Education School of Mechanical EngineeringDalian University of TechnologyDalian 116024China

Laser ablation is an important process during Laser-Assisted Grinding(LAG)of hard and brittle *** realize controllable material removal during laser ablation of RB-SiC composites,ablation experiments under different Laser Energy Density(LAED)and LAG experiments are *** rules and mechanism of physical phase,ablation morphology and crack characteristics caused by laser irradiation are *** forces of LAG and Conventional Grinding(CG)are *** results show that ablation surface changes from slight oxidation to obvious material removal with LAED increasing,and ablation depth increases *** ablation products change from submicron SiO_(2)particles to nanoscale particles and *** LAED promotes SiC decomposition and sublimation,which leads to the increase of C *** SiC phase forms corrugated shape in recast layer and columnar shape in Heat Affected Zone(HAZ)at 56 J/mm^(2).The cold and heat cycle leads to formation of fishbone *** ablation specimen under 30 J/mm^(2),the grinding force can be reduced by a maximum of 39%and brittle damage region is *** material removal and microcrack generated will significantly reduce the hardness and improve machinability,which can promote grinding efficiency.

关键词： RB-SiC Laser Ceramic Composites Grinding

Transfer film effects induced by 3D-printed polyether-ether-ketone with excellent tribological properties for joint prosthesis

在线全文

学校读者我要写书评

暂无评论

Bio-Design and manufacturing 2024年第1期7卷 43-56页

作者： Yang Li Jibao Zheng Changning Sun Dichen Li State Key laboratory for manufacturing System Engineering School of Mechanical EngineeringXi’an Jiaotong UniversityXi’an 710054China National Medical Products Administration(NMPA)Key laboratory for Research and Evaluation of Additive manufacturing Medical Devices Xi’an Jiaotong UniversityXi’an 710054China

Based on the building principle of additive manufacturing,printing orientation mainly determines the tribological properties of joint *** this study,we created a polyether-ether-ketone(PEEK)joint prosthesis using fused filament fabrication and investigated the effects of printing orientation on its tribological properties using a pin-on-plate tribometer in 25% newborn calf *** ultrahigh molecular weight polyethylene transfer film is formed on the surface of PEEK due to the mechanical capture of wear debris by the 3D-printed groove morphology,which is significantly impacted by the printing orientation of *** the printing orientation was parallel to the sliding direction of friction,the number and size of the transfer film increased due to higher steady *** transfer film protected the matrix and reduced the friction coefficient and wear rate of friction pairs by 39.13%and 74.33%,***,our findings provide a novel perspective regarding the role of printing orientation in designing knee prostheses,facilitating its practical applications.

关键词： 3D printing orientation Transfer film Tribological properties Polyether-ether-ketone Knee prosthesis

Converting an O-vacancy-rich oxide into a multifunctional separator modifier for long-lifespan lithium metal batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第10期97卷 371-378,I0007页

作者： Juntao Si Xiaoying Li Yixuan Li Kuo Cao Yiran Zhu Chunhua Chen CAS Key laboratory of precision and Intelligent Chemistry Department of Materials Science and EngineeringUniversity of Science and Technology of ChinaHefei 230026AnhuiChina

The lithium metal anode is hailed as the desired "holy grail" for the forthcoming generation of highenergy-density batteries,given its astounding theoretical capacity and low ***,the formation and growth of dendrites seriously compromise battery life and ***,an yttriastabilized bismuth oxide(YSB) layer is fabricated on the polypropylene(PP) separator,where YSB reacts with Li anode in-situ in the cell to form a multi-component composite interlayer consisting of Li_(3)Bi,Li_(2)O,and Y_(2)O_(3).The interlayer can function not only as a redistributor to regulate Li^(+) distribution but also as an anion adsorber to increase the Li^(+) transference number from 0.37 to 0.79 for suppressing dendrite nucleation and ***,compared with the cell with a baseline separator,those with modified separators exhibit prolonged lifespan in both Li/Li symmetrical cells and Li/Cu ***,the full cells coupled with ultrahigh-loading LiFePO_(4) display an excellent cycling performance of 1700 cycles with a high capacity retention of ~80% at 1 C,exhibiting great potential for practical *** work provides a feasible and effective new strategy for separator modification towards building a much-anticipated dendrite-free Li anode and realizing long-lifespan lithium metal batteries.

关键词： Lithium metal battery Separator Dendrite-free Multifunctional interlayer Conversion-alloying reaction

Microstructure transformations and improving wear resistance of austenitic stainless steel additively fabricated by arc-based DED process

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第8期38卷 194-204页

作者： Ashish Yadav Manu Srivastava Prashant K.Jain Sandeep Rathee Hybrid Additive manufacturing laboratory Mechanical Engineering DepartmentPDPM Indian Institute of Information TechnologyDesign&ManufacturingJabalpur482005Madhya PradeshIndia FFF laboratory Mechanical Engineering DepartmentPDPM Indian Institute of Information TechnologyDesign&ManufacturingJabalpur482005Madhya PradeshIndia Department of Mechanical Engineering National Institute of TechnologySrinagarIndia

In this study, austenitic stainless steel(ASS) was additively fabricated by an arc-based direct energy deposition(DED) technique. Macrostructure, microstructure, mechanical characteristics at different spatial orientations(0°, 90°, and 45°), and wear characteristics were evaluated at the deposited structure top, middle, and bottom regions. Results show that austenite(γ) and delta-ferrite(δ) phases make up most of the microstructure of additively fabricated SS316LSi steel. Within γ matrix, δ phase is dispersed both(within and along) grain boundaries, exhibiting a fine vermicular morphology. The bottom, middle,and top regions of WAAM deposited ASS exhibit similar values to those of wrought SS316L in the tensile and impact test findings. Notably, a drop in hardness values is observed as build height increases. During SEM examinations of fractured surfaces from tensile specimen, closed dimples were observed, indicating good ductility of as-built structure. Wear test findings show signs of mild oxidation and usual adhesive wear. By depositing a mechanically mixed composite layer, an increase in the oxidation percentage was discovered to facilitate healing of worn surfaces. The findings of this study will help in design, production and renovation of products/components that are prone to wear. WAAM-deposited ASS has remarkable strength and ability to withstand impacts;it can be used in the production of armour plates for defence applications, mainly military vehicles and aircraft.

关键词： Metal additive deposition Defence applications Arc-based DED Characterization Wear behaviour Fractography

Effect of Direct Aging on Corrosion Behavior of AlSi10Mg Alloy Fabricated by Laser Powder Bed Fusion

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 266-282页

作者： Zhen Zhang Zhanyong Zhao Xiaofeng Li Beibei Wang Peikang Bai Shanxi Key laboratory of Controlled Metal Solidification and precision manufacturing School of Materials Science and EngineeringNorth University of ChinaTaiyuan030051China Technical Center Taiyuan Iron and Steel(Group)Co.LtdTaiyuan030003China School of Materials Science and Engineering Taiyuan University of Science and TechnologyTaiyuan030024China

Effect of direct aging of 170℃on corrosion behavior of laser powder bed fused AlSi10Mg(LPBF-AlSi10Mg)was studied by microstructure analysis,electrochemical analysis and X-ray photoelectron *** results show that direct aging of 170℃has little effect on melt pool and Si cellular structure,but promotes the precipitation of nano-Si particles and releases the residual *** increasing aging time from 0 to 4 h to 24 h,the corrosion property of the LPBF-AlSi10Mg is deteriorated,which is evidenced by increased corrosion current density and decreased pitting potential and polarization *** increasing the aging time,the thickness of the oxide film formed on surface of the LPBF-AlSi10Mg *** Si content of the oxide film of the sample aging for 4 h is the lowest,9.42 at.%,and it is the highest,18.62 at.%,for the sample aging for 24 *** electrochemical noise analysis reveals that the middle-frequency contribution of the Hilbert spectrum is responsible for the deteriorated corrosion performance,which corresponds to metastable pitting initiated by nano-Si particles.

关键词： Laser powder bed fusion AlSi10Mg Direct aging Corrosion

Carbon nanotube integrated circuit technology:purification,assembly and integration

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Extreme manufacturing 2024年第3期6卷 120-138页

作者： Jianlei Cui Fengqi Wei Xuesong Mei State Key laboratory for manufacturing Systems Engineering Xi’an Jiaotong UniversityXi’an 710049People’s Republic of China

As the manufacturing process of silicon-based integrated circuits(ICs)approaches its physical limit,the quantum effect of silicon-based field-effect transistors(FETs)has become increasingly *** the burgeoning carbon-based semiconductor technology has become one of the most disruptive technologies in the post-Moore *** one-dimensional nanomaterials,carbon nanotubes(CNTs)are far superior to silicon at the same technology nodes of FETs because of their excellent electrical transport and scaling properties,rendering them the most competitive material in the next-generation ICs ***,certain challenges impede the industrialization of CNTs,particularly in terms of material preparation,which significantly hinders the development of CNT-based *** on CNT-based ICs technology,this review summarizes its main technical status,development trends,existing challenges,and future development directions.

关键词： carbon nanotubes integrated circuits field-effect transistors post-Moore