检索结果-南通市图书馆

Improving flangeability of multiphase steel by increasing microstructural homogeneity

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第7期31卷 1736-1745页

作者： Xiao-yu Yang Yong-gang Yang Xing Fang Han-long Zhang Zhen-li Mi Beijing Advanced Innovation center for Materials genome engineering Institute of Engineering TechnologyUniversity of Science and Technology BeijingBeijing 100083China Shanghai Baosteel Group Corp.Technology center Shanghai 201900China

Multiphase microstructure significantly increases the strength,usually at the expense of flangeability because of lacking microstructure *** further improve the strength-flangeability of multiphase steel,the microstructural homogeneity was advanced by adjusting the hard martensite/austenite(M/A)*** strength-flangeability was measured via uniaxial tensile tests and hole expansion *** microstructures were characterized using a scanning electron microscope equipped with an electron backscatter diffraction detector and a transmission electron *** tests were supplementally used to quantitatively reveal the microstructural homogeneity of the *** show that the adjusted multiphase steel achieves an excellent ultimate tensile strength(~800 MPa)and flangeability(~135%hole expansion ratio).A promising homogeneous multiphase microstructure was obtained by controlling undercooled austenite transformed at about 600℃.This microstructure consists of soft polygonal ferrite,blocky bainitic ferrite,and hard M/A *** volume fraction of M/A islands is around 5%,and the average size is less than l *** nanoindentation analysis indicated that the participation of M/A islands impressively influenced the microstructural *** strain partition and better mechanical compatibility were present in the adjusted multiphase steel since the plasticity initiation started late,which resulted in a positive ***,avoiding M/A islands distributed in the chain along the rolling direction on the matrix hindered the possibility of voids coalescing into cracks and stabilized the flanging performance.

关键词： Multiphase steel Flangeability Martensite/austenite island-Microstructural homogeneity-Microstructure Compact strip production process

A novel high-Cr CoNi-based superalloy with superior high-temperature microstructural stability, oxidation resistance and mechanical properties

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1373-1381页

作者： Xiaorui Zhang Min Zou Song Lu Longfei Li Xiaoli Zhuang Qiang Feng Beijing Advanced Innovation center for Materials genome engineering State Key Laboratory for Advanced MetalsUniversity of Science and Technology BeijingBeijing 100083China

A novel multicomponent high-Cr CoNi-based superalloy with superior comprehensive performance was prepared,and the evaluation of its high-temperature microstructural stability,oxidation resistance,and mechanical properties was conducted mainly using its cast polycrystalline *** results disclosed that the morphology of theγ′phase remained stable,and the coarsening rate was slow during the long-term aging at 900–1000℃.The activation energy forγ′precipitate coarsening of alloy 9CoNi-Cr was(402±51)kJ/mol,which is higher compared with those of CMSX-4 and some other Ni-based and Co-based ***,there was no indica-tion of the formation of topologically close-packed phases during this *** these factors demonstrated the superior microstructural stability of the *** mass gain of alloy 9CoNi-Cr was 0.6 mg/cm^(2) after oxidation at 1000℃ for 100 h,and the oxidation resistance was comparable to advanced Ni-based superalloys CMSX-4,which can be attributed to the formation of a continuous Al_(2)O_(3) protective ***,the compressive yield strength of this cast polycrystalline alloy at high temperatures is clearly higher than that of the conventional Ni-based cast superalloy and the compressive minimum creep rate at 950℃ is comparable to that of the conventional Ni-based cast superalloy,demonstrating the alloy’s good mechanical properties at high *** is partially because high Cr is bene-ficial in improving theγandγ′phase strengths of alloy 9CoNi-Cr.

关键词： CoNi-based superalloys microstructure coarsening oxidation mechanical properties

Multi-performance evaluation of high-throughput accelerated corrosion test for high-strength low-alloy 921A steel

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第5期31卷 1260-1278页

作者： Cong-cong Du Ming-hua Qin Zhan-fang Wu Dong-ling Li Lei Zhao Xiang-yang Li Hai-zhou Wang Beijing Advanced Innovation center for Materials genome engineering National Center for Materials Service SafetyUniversity of Science and Technology BeijingBeijing100083China China Iron and Steel Research Institute Group Co. Ltd.Beijing100081China Beijing Advanced Innovation center for Materials genome engineering Central Iron and Steel Research InstituteBeijing100081China

The corrosion behavior of high-strength low-alloy 921A steel in a simulated marine atmospheric environment was studied using a high-throughput experimental *** corrosion behavior,corrosion morphology,and corrosion products of 921A steels were analyzed using various techniques,including corrosion mass loss method,polarization curve,white-light interferometry,scanning electron microscopy,energy-dispersive spectrometry,microbeam X-ray fluorescence spectrometry,X-ray diffraction technique,and X-ray photoelectron *** test results indicated that 921A steel exhibits better corrosion resistance than Q450NQR1 steel in simulated harsh atmospheric environments,as evidenced by a lower corrosion mass loss rate throughout the corrosion *** corrosion products of both steels consisted ofα-FeOOH,Fe_(3)O_(4),andγ-FeOOH,withα-FeOOH being more prevalent in the rust layer of 921A steel than in Q450NQR1 *** inner rust layer of 921A steel also exhibited an appositional enrichment region of Cr,Ni,Mo,and V,leading to its superior corrosion resistance compared to that of Q450NQR1 *** efficacy of high-throughput accelerated corrosion experimental methods was highlighted for evaluating the corrosion resistance of steel materials in harsh environmental *** findings suggest that 921A steel exhibits better corrosion resistance compared to Q450NQR1 steel and has the potential to be more suitable in harsh marine atmospheric *** characterization of the rust layer structures and composition reveals the parallel enrichment of certain elements in the inner rust layer of 921A steel,which enhances its corrosion resistance.

关键词： Atmospheric corrosion High-throughput experimental method High-strength low-alloy steel Corrosion characteristics Rust layer Element enrichment

A three-dimensional co-continuous network structure polymer electrolyte with efficient ion transport channels enabling ultralong-life all solid-state lithium metal batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 635-645页

作者： Meng Wang Hu Zhang Yewen Li Ruiping Liu Huai Yang School of Chemical&Environmental engineering China University of Mining and Technology(Beijing)Beijing 100083China Beijing Advanced Innovation center for Materials genome engineering&School of Materials Science and engineering Peking UniversityBeijing 100871China

Solid polymer electrolytes(SPEs)have emerged as one of the most promising candidates for the construction of solid-state lithium batteries due to their excellent flexibility,scalability,and interface compatibility with ***,a novel all-solid polymer electrolyte(PPLCE)was fabricated by the copolymer network of liquid crystalline monomers and poly(ethylene glycol)dimethacrylate(PEGDMA)acts as a structural frame,combined with poly(ethylene glycol)diglycidyl ether short chain interspersed serving as mobile ion transport *** preparaed PPLCEs exhibit excellent mechanical property and out-standing electrochemical performances,which is attributed to their unique three-dimensional cocontinuous structure,characterized by a cross-linked semi-interpenetrating network and an ionic liquid phase,resulting in a distinctive nanostructure with short-range order and long-range ***,the addition of PEGDMA is proved to be critical to the comprehensive performance of the PPLCEs,which effectively modulates the microscopic morphology of polymer networks and improves the mechanical properties as well as cycling stability of the solid *** used in a lithiumion symmetrical battery configuration,the 6 wt%-PPLCE exhibites super stability,sustaining operation for over 2000 h at 30 C,with minimal and consistent overpotential of 50 *** resulting Li|PPLCE|LFP solid-state battery demonstrates high discharge specific capacities of 160.9 and 120.1 mA h g^(-1)at current densities of 0.2 and 1 C,*** after more than 300 cycles at a current density of 0.2 C,it retaines an impressive 73.5%***,it displayes stable cycling for over 180 cycles at a high current density of *** super cycle stability may promote the application for ultralong-life all solid-state lithium metal batteries.

关键词： Solid-state electrolyte Lithium-metal batteries Liquid crystalline polymer Copolymer 3D co-continuous structure Long cycle stability

Review on the design of high-strength and hydrogen-embrittlement-resistant steels

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1572-1589页

作者： Zhiyu Du Rongjian Shi Xingyu Peng Kewei Gao Xiaolu Pang Beijing Advanced Innovation center for Materials genome engineering School of Materials Science and EngineeringUniversity of Science and Technology BeijingBeijing 100083China Institute for Materials Intelligent Technology Liaoning Academy of MaterialsShenyang 110010China

Given the carbon peak and carbon neutrality era,there is an urgent need to develop high-strength steel with remarkable hydrogen embrittlement *** is crucial in enhancing toughness and ensuring the utilization of hydrogen in emerging iron and steel ***,the pursuit of enhanced metallic materials presents a cross-disciplinary scientific and engineering *** high-strength,toughened steel with both enhanced strength and hydrogen embrittlement(HE)resistance holds significant theoretical and practical *** ensures secure hydrogen utilization and further carbon neutrality objectives within the iron and steel *** on the design principles of high-strength steel HE resistance,this review provides a comprehensive overview of research on designing surface HE resistance and employing nanosized precipitates as intragranular hydrogen *** also proposes feasible recommendations and prospects for designing high-strength steel with enhanced HE resistance.

关键词： hydrogen embrittlement surface design hydrogen traps nanosized precipitates

Directional amine-based solvent extraction for simultaneous enhanced water recovery,salt separation and effective descaling from hypersaline brines

在线全文

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & engineering 2024年第3期18卷 83-92页

作者： Yuyao Zhang Litao Jia Jin Zhao Xuming Liu Shuyu Dong Chuanyang Liu Yuanyuan Cui Shougang Research Institute of Technology Beijing 100043China Research center of Environmental Technology in Water Pollution Source Identification and precise Supervision School of EnvironmentTsinghua UniversityBeijing 100084China

The feasibility of simultaneous water recovery,salt separation and effective descaling of hypersaline brine was investigated by diisopropylamine(DIPA)-based directional solvent extraction(DSE),using diluted/concentrated seawater with initial saline concentration range of 12–237 g/L at extraction temperatures of 5 and 15℃,*** water recovery shows an obvious boundary at saline concentration of 115 g/L under dual effect of specific water extraction efficiency and extraction *** Cl^(–) ion concentration in product water is in sharp contrast to the nearly complete removal of SO_(4)^(2–)and hardness ions,indicating that DIPA-based DSE process indeed achieved efficient separation and purification of Cl^(–) ion from hypersaline ***,the radical precipitation of Mg^(2+)and Ca^(2+)ions in form of Mg(OH)_(2)and CaCO_(3)demonstrates effective descaling potential,although it leads to more DIPA residues in dewatered raffinate than product ***,an exponential correlation between the Cl^(–) removal efficiency and specific water extraction efficiency further reveals the intrinsic relationship of water extraction process and transfer of Cl^(–) ion to the product ***,the study provides a novel approach for integrating the water recovery and separation of Cl^(–) ion from ultra-high-salinity brines with radical precipitation of Mg^(2+)and Ca^(2+) ions in one step.

关键词： Hypersaline brines Directional solvent extraction Salt separation Ca^(2+)and Mg^(2+)descaling

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1426-1436页

作者： Ying Gao Ce Zhang Jiazhen Zhang Xin Lu Beijing Advanced Innovation center for Materials genome engineering State Key Laboratory for Advanced Metals and MaterialsInstitute for Advanced Ma-terials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China National engineering Research center for Advanced Rolling Technology National Engineering Research Center for Flat Rolling EquipmentInstitute of Engin-eering TechnologyUniversity of Science and Technology BeijingBeijing 100083China

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying *** this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot *** microstructure and mechanical properties under different process paramet-ers were *** microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening *** results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering *** block was hot rolled at 1200℃ with an 80%reduction under only two passes without *** strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain *** hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

关键词： elemental powder powder metallurgy titanium alloy hot rolling strength and plasticity

Effect of bipolar-plates design on corrosion,mass and heat transfer in proton-exchange membrane fuel cells and water electrolyzers:A review

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1599-1616页

作者： Jiuhong Zhang Xiejing Luo Yingyu Ding Luqi Chang Chaofang Dong Key Laboratory for Corrosion and Protection(MOE) Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China Beijing Advanced Innovation center for Materials genome engineering Beijing 100083China

Attaining a decarbonized and sustainable energy system,which is the core solution to global energy issues,is accessible through the development of hydrogen ***-exchange membrane water electrolyzers(PEMWEs)are promising devices for hydrogen production,given their high efficiency,rapid responsiveness,and *** plates account for a relatively high percentage of the total cost and weight compared with other components of ***,optimization of their design may accelerate the promotion of *** paper reviews the advances in materials and flow-field design for bipolar ***,the working conditions of proton-exchange membrane fuel cells(PEMFCs)and PEMWEs are compared,including reaction direction,operating temperature,pressure,input/output,and ***,the current research status of bipolar-plate substrates and surface coatings is summarized,and some typical channel-rib flow fields and porous flow fields are ***,the effects of materials on mass and heat transfer and the possibility of reducing corrosion by improving the flow field structure are ***,this review discusses the potential directions of the development of bipolar-plate design,including material fabrication,flow-field geometry optimization using threedimensional printing,and surface-coating composition optimization based on computational materials science.

关键词： bipolar-plates flow design mass and heat transfer corrosion water electrolyzers fuel cells

Tailoring the austenite characteristics via dual nanoparticles to synergistically optimize the strength-ductility in cold rolled medium Mn steel

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 158-171页

作者： Qizhe Ye Haokai Dong Qinyi Guo Yishuang Yu Lijie Qiao Yu Yan Beijing Advanced Innovation center for Materials genome engineering Corrosion and Protection CenterInstitute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China School of Mechanical and Automotive engineering South China University of TechnologyGuangzhou 510641China School of Metallurgical and Ecological engineering University of Science and Technology BeijingBeijing 100083China School of Biomedical engineering Shanghai Jiao Tong UniversityShanghai 200240China

In this work,we proposed a novel Cu/θdual nanoparticles strategy to tailor the austenite characteris-tics of a medium Mn steel via a tempering-annealing process to optimize the mechanical *** explored the effects of Cu-rich particles and cementite precipitated in the tempering process on the austenite reversion during the subsequent annealing *** experiments and numerical simula-tions verified that the austenite inherited from cementite had a finer size and a higher Mn enrichment compared with the austenite originating from the tempered martensite *** addition,quantitative evaluations revealed that the pinning effect exerted by the Cu-rich particles could significantly hinder theα/γinterface migration and the recrystallized grain growth,thereby further refining the final *** contributions from the effects of dual nanoprecipitates on the austenite reversion,the heterogeneous austenite grains inherited from varying nucleation sites ensured the sustained and gradual deformation-induced martensite and twinning ***,the Cu-added steels subjected to a tempering-annealing process achieved synergetic enhancement of the tensile strength from 1055 MPa to 1250 MPa and elongation from 33%to 45%.This strategy may provide new guidance for the development and alloy design of high-performance medium Mn steels.

关键词： Dual nanoparticles Medium Mn steel Tempering-annealing process Austenite reversion Mechanical properties