检索结果-南通市图书馆

Superhydrophobic and corrosion-resistant siloxane-modified MgAl-LdHs coatings on magnesium alloy prepared under mild conditions

引用

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 450-463页

作者： Wenxi Zhang Zhangzelong Zhuo dan Xu Liang Wu Zhihui Xie Chemical Synthesis and Pollution Control Key Laboratory of Sichuan Province College of Chemistry and Chemical EngineeringChina West Normal UniversityNanchong 637002China College of Materials Science and engineering/national engineering research center for Magnesium Alloys Chongqing UniversityChongqing 400044China

We have developed a superhydrophobic and corrosion-resistant LdH-W/PFdTMS composite coating on the surface of Mg *** composite comprised a tungstate-intercalated(LdH-W)underlayer that was grown at low temperature(relative to hydrothermal reaction conditions)under atmospheric pressure and an outer polysiloxane layer created from a solution containing perfluorodecyltrimethoxysilane(PFdTMS)using a simple immersion *** successful intercalation of tungstate into the LdH phase and the following formation of the polysiloxane layer were confirmed through X-ray diffraction(Xrd),Fourier transform infrared(FTIr)spectroscopy,and X-ray photoelectron spectroscopy(XPS).The corrosion resistance of the LdH-W film,both before and after the PFdTMS modification,was evaluated using electrochemical impedance spectroscopy(EIS),Tafel curves,and immersion *** results showed that Mg coated with LdH-W/PFdTMS exhibited significantly enhanced corrosion protection compared to the unmodified LdHW film,with no apparent signs of corrosion after exposure to 3.5wt%NaCl solution for 15 ***,the LdH-W/PFdTMS coating demonstrated superior superhydrophobicity and self-cleaning properties against water and several common beverages,as confirmed by static contact angle and water-repellency *** results offer valuable insights into preparing superhydrophobic and corrosion-resistant LdH-based composite coatings on Mg alloy surfaces under relatively mild reaction conditions.

关键词： Mg alloy corrosion coating layered double hydroxide

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Understanding the local structure and thermophysical behavior of Mg-La liquid alloys via machine learning potential

引用

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 439-449页

作者： Jia Zhao Taixi Feng Guimin Lu national engineering research center for Integrated Utilization of Salt Lake resource East China University of Science and TechnologyShanghai 200237China Joint International Laboratory for Potassium and Lithium Strategic resources East China University of Science and TechnologyShanghai 200237China

The local structure and thermophysical behavior of Mg-La liquid alloys were in-depth understood using deep potential molecular dynamic(dPMd) simulation driven via machine learning to promote the development of Mg-La alloys. The robustness of the trained deep potential(dP) model was thoroughly evaluated through several aspects, including root-mean-square errors(rMSEs), energy and force data, and structural information comparison results;the results indicate the carefully trained dP model is reliable. The component and temperature dependence of the local structure in the Mg-La liquid alloy was analyzed. The effect of Mg content in the system on the first coordination shell of the atomic pairs is the same as that of temperature. The pre-peak demonstrated in the structure factor indicates the presence of a medium-range ordered structure in the Mg-La liquid alloy, which is particularly pronounced in the 80at% Mg system and disappears at elevated temperatures. The density, self-diffusion coefficient, and shear viscosity for the Mg-La liquid alloy were predicted via dPMd simulation, the evolution patterns with Mg content and temperature were subsequently discussed, and a database was established accordingly. Finally, the mixing enthalpy and elemental activity of the Mg-La liquid alloy at 1200 K were reliably evaluated,which provides new guidance for related studies.

关键词： magnesium-lanthanum liquid alloys local structure macroscopic properties thermodynamic behavior deep potential mo-lecular dynamic simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Overview of in-situ oxygen production technologies for lunar resources

引用

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 233-255页

作者： Youpeng Xu Sheng Pang Liangwei Cong Guoyu Qian dong Wang Laishi Li Yusheng Wu Zhi Wang College of Materials Science and engineering Shenyang University of TechnologyShenyang 110870China CAS Key Laboratory of Green Process and engineering National Engineering Research Center for Green Recycling of Strategic Metal ResourcesInstitute of Process EngineeringChinese Academy of SciencesBeijing 100190China Innovation Academy for Green Manufacture Chinese Academy of SciencesBeijing 100190China School of Chemical engineering University of Chinese Academy of SciencesBeijing 100049China

The rich resources and unique environment of the Moon make it an ideal location for human expansion and the utilization of extraterrestrial ***,crucial for supporting human life on the Moon,can be extracted from lunar regolith,which is highly rich in oxygen and contains polymetallic *** oxygen and metal extraction can be achieved using existing metallurgical ***,the ample reserves of water ice on the Moon offer another means for oxygen *** paper offers a detailed overview of the leading technologies for achieving oxygen production on the Moon,drawing from an analysis of lunar resources and environmental *** delves into the principles,processes,advantages,and drawbacks of water-ice electrolysis,two-step oxygen production from lunar regolith,and one-step oxygen production from lunar *** two-step methods involve hydrogen reduction,carbothermal reduction,and hydrometallurgy,while the one-step methods encompass fluorination/chlorination,high-temperature decomposition,molten salt electrolysis,and molten regolith electrolysis(MOE).Following a thorough comparison of raw materials,equipment,technology,and economic viability,MOE is identified as the most promising approach for future in-situ oxygen production on the *** the corrosion characteristics of molten lunar regolith at high temperatures,along with the Moon's low-gravity environment,the development of inexpensive and stable inert anodes and electrolysis devices that can easily collect oxygen is critical for promoting MOE technology on the *** review significantly contributes to our understanding of in-situ oxygen production technologies on the Moon and supports upcoming lunar exploration initiatives.

关键词： lunar resources in-situ oxygen production space metallurgy molten lunar regolith electrolysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Prediction and optimization of flue pressure in sintering process based on SHAP

引用

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 346-359页

作者： Mingyu Wang Jue Tang Mansheng Chu Quan Shi Zhen Zhang School of Metallurgy Northeastern UniversityShenyang 110819China Liaoning Low-Carbon Steelmaking Technology engineering research center Northeastern UniversityShenyang 110819China engineering research center of Frontier Technologies for Low-Carbon Steelmaking(Ministry of Education) Shenyang 110819China

Sinter is the core raw material for blast *** pressure,which is an important state parameter,affects sinter *** this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment ***,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction *** effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment *** operating parameter combination was then *** flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.

关键词： sintering process flue pressure shapley additive explanation prediction optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

engineering atomic rb-N configurations to tune radical pathways for highly selective photocatalytic H2O2 synthesis coupled with biomass valorization

引用

Journal of Energy Chemistry 2025年第1期100卷 215-225页

作者： Jiaye Li Shuang Pan Yihuang Chen Qiong Liu College of Chemistry and Materials engineering Wenzhou University Guangdong Provincial Key Laboratory of Chemical Measurement and Emergency Test Technology (china) Institute of Analysis Guangdong Academy of Sciences (China National Analytical CenterGuangzhou)

Photocatalytic oxygen reduction for hydrogen peroxide （H2O2） synthesis presents a green and costeffective production ***,achieving highly selective H2O2synthesis remains challenging,necessitating precise control over free radical reaction pathways and minimizing undesirable oxidative ***,we report for the visible light-driven simultaneous co-photocatalytic reduction of O2to H2O2and oxidation of biomass using the atomic rubidium-nitride modified carbon nitride（CNrb）.The optimized CNrb catalyst demonstrates a record photoreduction rate of 8.01 mM h-1for H2O2generation and photooxidation rate of 3.75 mM h-1for furfuryl alcohol to furoic acid,achieving a remarkable solar-to-chemical conversion （SCC） efficiency of up to 2.27%.Experimental characterizations and dFT calculation disclosed that the introducing atomic rb–N configurations allows for the high-selective generation of superoxide radicals while suppressing hydroxyl free radical *** is because the rb–N serves as the new alternative site to perceive a stronger connection position for O2adsorption and reinforce the capability to extract protons,thereby triggering a high selective redox product *** study holds great potential in precisely regulating reactive radical processes at the atomic level,thereby paving the way for efficient synthesis of H2O2coupled with biomass valorization.

关键词： Atomic economy radical pathway regulation rubidium atom coordination Biomass valorization

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effects of carbon content on the microstructure and tensile properties of a low-density steel

引用

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 391-401页

作者： Yongxuan Shang Mingyu Fan Shuyong Jiang Zhongwu Zhang Key Laboratory of Superlight Materials and surface Technology Ministry of EducationCollege of Materials Science and Chemical EngineeringHarbin Engineering UniversityHarbin 150001China State Key Laboratory of Metal Material for Marine Equipment and Application Iron&Steel Research Institute of Ansteel Group CorporationAnshan 114009China

Carbon can change the phase components of low-density steels and influence the mechanical *** this study,a new method to control the carbon content and avoid the formation ofδ-ferrite by decarburization treatment was *** microstructural changes and mechanical characteristics with carbon content induced by decarburization were systematically ***-Jaoul(C-J)analysis was employed to examine the work hardening characteristics during the tensile *** decarburization by heat treatments,the carbon content within the austenite phase decreased,while Mn and Al were almost unchanged;this made the steel with full austenite transform into the austenite and ferrite dual ***,(Ti,V)C carbides existed in both matrix phase and the mole fraction almost the *** addition,the formation of other carbides *** loss induced a decrease in strength due to the weakening of the carbon solid *** the steel with the single austinite,the deformation mode of austenite was the dislocation planar glide,resulting in the formation of *** the dual-phase steel,the deformation occurred by the dislocation planar glide of austenite first,with the increase in strain,the cross slip of ferrite took place,forming dislocation cells in *** the late stage of deformation,the work hardening of austinite increased rapidly,while that of ferrite increased slightly.

关键词： low-density steels carbon content decarburization strengthening mechanisms work hardening behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constructing donor–Acceptor‑Linked COFs Electrolytes to regulate Electron density and Accelerate the Li^(+)Migration in Quasi‑Solid‑State Battery

引用

Nano-Micro Letters 2025年第1期17卷 456-471页

作者： Genfu Zhao Hang Ma Conghui Zhang Yongxin Yang Shuyuan Yu Haiye Zhu Yongjiang Sun Hong Guo School of Materials and Energy International Joint Research Center for Advanced Energy Materials of Yunnan ProvinceYunnan UniversityKunming 650091People’s Republic of China Yunnan Yuntianhua Co. LtdR&D CenterKunming 650228People’s Republic of China Southwest United Graduate School Kunming 650091People’s Republic of China

regulation the electronic density of solid-state electrolyte by donor–acceptor(d–A)system can achieve highly-selective Li^(+)transportation and conduction in solid-state Li metal *** study reports a high-performance solid-state electrolyte thorough d–A-linked covalent organic frameworks(COFs)based on intramolecular charge transfer *** other reported COFbased solid-state electrolyte,the developed concept with d–A-linked COFs not only achieves electronic modulation to promote highly-selective Li^(+)migration and inhibit Li dendrite,but also offers a crucial opportunity to understand the role of electronic density in solid-state Li metal *** introduced strong electronegativity F-based ligand in COF electrolyte results in highlyselective Li^(+)(transference number 0.83),high ionic conductivity(6.7×10^(-4)S cm^(−1)),excellent cyclic ability(1000 h)in Li metal symmetric cell and high-capacity retention in Li/LiFePO_(4)cell(90.8%for 300 cycles at 5C)than substituted C-and N-based *** is ascribed to outstanding d–A interaction between donor porphyrin and acceptor F atoms,which effectively expedites electron transferring from porphyrin to F-based ligand and enhances Li^(+)***,we anticipate that this work creates insight into the strategy for accelerating Li^(+)conduction in high-performance solid-state Li metal batteries through d–A system.

关键词： Electronic modulation engineering donor-acceptor-linked covalent organic frameworks Quasi-solid-state Li metal battery

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Boosting charge extraction and efficiency of inverted perovskite solar cells through coordinating group modification at the buffer layer/cathode interface

引用

Nano research 2025年第1期18卷 415-423页

作者： Zhiqing Liang Ziqiu ren Ziyu Wang Nan Yan Ling Li Bo Zhang Yanlin Song College of Chemistry Zhengzhou UniversityZhengzhou 450052China Key Laboratory of Applied surface and Colloid Chemistry Ministry of Education Shaanxi Key Laboratory for Advanced Energy DevicesShaanxi Engineering Lab for Advanced Energy Technology School of Materials Science and EngineeringShaanxi Normal UniversityXi’an 710119China Key Laboratory of Green Printing Institute of ChemistryChinese Academy of Sciences(ICCAS)Beijing Engineering Research Center of Nanomaterials for Green Printing TechnologyNational Laboratory for Molecular Sciences(BNLMS)Beijing 100190China

In inverted perovskite solar cells (PSCs),effective modification of the interface between the metalcathode and electron transport layer (ETL) is crucial forachieving high performance and stability. Herein, sulfonatedbathocuproine, commonly known as disodium bathocuproinedisulfonate (BCdS), was employed as a cathode buffer layerto address the interfacial issues at the [6,6]-phenyl-C61-butyricacid methyl ester (PCBM)/Ag interface. BCdS possesses theability to form coordinate bonds with Ag electrodes. Theutilization of the BCdS buffer layer enhanced the chargeextraction capability at the cathode interface whilesimultaneously achieving interfacial defect passivation,improving interfacial contact and increasing the built-in electricfield. Consequently, a power conversion efficiency (PCE) of25.06% was achieved. Furthermore, owing to the excellent filmforminguniformity of BCdS on PCBM, the stability of thedevice was also improved. After storage in dry air for morethan 2000 h, the device maintained 96% of its initial efficiency. This work underscores the remarkable potential of tailoringcoordination groups to enhance charge extraction efficiency at the ETL-cathode interface, unveiling a promising newfrontier in buffer layer development and performance optimization strategies for PSCs.

关键词： perovskite solar cells buffer layer bathocuproine disulfonate coordination group modification electron transport layer(ETL)-cathode interface

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Influence of introducing Zr,Ti,Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy

引用

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 147-153页

作者： Junjie Li Wenbo Yu Zhenyu Sun Weichen Zheng Liangwei Zhang Yanling Xue Wenning Liu Shoumei Xiong center of Materials Science and engineering School of Mechanical and Electronic Control EngineeringBeijing Jiaotong UniversityBeijing 100044China Traffic&Transportation engineering Central South UniversityChangsha 410075China Shanghai Synchrotron radiation Facility Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai 201204China School of Materials Science and engineering Tsinghua UniversityBeijing 100084China

High pressure die casting(HPdC)AlSi10Mn Mg alloy castings are widely used in the automobile *** can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated ***,the development of non-heat treatment Al alloys is becoming the hot *** addition,HPdC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of *** achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and *** influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic *** results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased ***,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical *** introduction of Ce resulted in the poisoning effect and reduced mechanical properties.

关键词： aluminium alloy high-pressure die-casting externally solidified crystals non-heat treatment

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanism of inflammatory response and therapeutic effects of stem cells in ischemic stroke:current evidence and future perspectives

引用

Neural regeneration research 2025年第1期20卷 67-81页

作者： Yubo Wang Tingli Yuan Tianjie Lyu Ling Zhang Meng Wang Zhiying He Yongjun Wang Zixiao Li Vascular Neurology Department of NeurologyBeijing Tiantan HospitalCapital Medical UniversityBeijingChina china national Clinical research center for Neurological diseases Beijing Tiantan HospitalCapital Medical UniversityBeijingChina Shanghai engineering research center of Stem Cells Translational Medicine ShanghaiChina national center for Healthcare Quality Management in Neurological diseases Beijing Tiantan HospitalCapital Medical UniversityBeijingChina Institute for regenerative Medicine Shanghai East HospitalSchool of Life Sciences and TechnologyTongji UniversityShanghaiChina Chinese Institute for Brain research BeijingChina research Unit of Artificial Intelligence in Cerebrovascular disease Chinese Academy of Medical SciencesBeijingChina Beijing engineering research center of digital Healthcare for Neurological diseases BeijingChina

Ischemic stroke is a leading cause of death and disability worldwide,with an increasing trend and tendency for onset at a younger ***,in particular,bears a high burden of stroke *** recent years,the inflammatory response after stroke has become a research hotspot:understanding the role of inflammatory response in tissue damage and repair following ischemic stroke is an important direction for its *** review summarizes several major cells involved in the inflammatory response following ischemic stroke,including microglia,neutrophils,monocytes,lymphocytes,and ***,we have also highlighted the recent progress in various treatments for ischemic stroke,particularly in the field of stem cell ***,understanding the complex interactions between inflammation and ischemic stroke can provide valuable insights for developing treatment strategies and improving patient *** cell therapy may potentially become an important component of ischemic stroke treatment.

关键词： cell therapy immune cell inflammatory ischemic stroke stem cell

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：