检索结果-南通市图书馆

Crystallization, Mechanical and flame-retardant Properties of Poly(lactic acid) Composites with DOPO and DOPO-POSS

Chinese Journal of Polymer Science 2018年第7期36卷 871-879页

作者： Lin Jia Wen-Chao Zhang Bin Tong Rong-Jie Yang national Engineering Research Center of flame retardant materials School of Materials Science and Engineering Beijing Institute of Technology

Poly（lactic acid）（PLA） composites with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide （DOPO） and DOPO- containing polyhedral oligomeric silsesquioxane （DOPO-POSS） were prepared via melting extrusion and injection molding. The crystallization, mechanical, and flame-retardant properties of PLA/DOPO and PLA/DOPO-POSS were investigated by differential scanning calorimetry （DSC）, X-ray diffraction （XRD）, tensile testing, thermogravimetric analysis （TGA）, limiting oxygen index （LOI）, and cone calorimeter test. The DSC results showed that the DOPO added could act as a plasticizer as reflected by lower glass transition temperature and inhibited crystallization of part of the PLA; the DOPO-POSS acted like a filler in the PLA matrix and slightly improved the crystallinity of the PLA matrix. The XRD and DSC analyses indicated that the PLA composites by cold molding injection were amorphous, and the PLA composites following a heat treatment in an oven at 120 ℃for 30 min achieved crystallinity. All the PLA and its composites after heat treatment had improved mechanical properties. The thermogravimetric analysis （TGA） tests showed that the PLA, DOPO and DOPO-POSS decomposed separately in the PLA/DOPO and PLA/DOPO-POSS, respectively. The cone calorimeter tests offered clear evidence that addition of the DOPO-POSS resulted in an evident reduction of 25% for the peak of heat release rate （p-HRR）. It was also confirmed that the crystalline flame-retardant PLA composites after heat treatment had better flame retardant properties than the amorphous PLA composites prepared by the cold molding.

关键词： Poly(lactic acid) DOPO-POSS Crystallization Mechanical property flame retardancy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental Study on Diesel Spray and flame Asymmetry Characteristics of Dual-Orifice Nozzles for a Medium-Speed Engine

引用

Journal of Thermal Science 2025年第1期34卷 303-322页

作者： JU Dehao LIU Rui ZHENG Liang DENG Jiahui ZHANG Wenzheng HUO Jinlu HUANG Li Shanghai Marine Diesel Engine Research Institute national Key laboratory of Marine Engine Science and Technology Key laboratory for Power Machinery and Engineering Ministry of EducationShanghai Jiao Tong University

The asymmetry of the multi-orifice spray will cause uneven heat load of the marine diesel engine,thereby affecting its working performance and service ***,an in-depth understanding of the spray and flame characteristics of multi-orifice nozzles will guide the optimization of the nozzle structure,needle design and diesel atomization and combustion *** this reason,four groups of dual-orifice nozzles with different hole diameters(0.1-0.55 mm) and mass flow rates covering the typical marine medium-speed diesel injections are designed and customized,and the constant volume chamber(CVC) with high temperature and pressure is used to simulate the actual in-cylinder working conditions of the diesel engine for the spray visualization *** study the asymmetry of the fuel sprays discharged from a diesel injector,the multi-orifice nozzle is simplified as a dual-orifice nozzle in this *** with X-ray Computed Tomography(CT) imaging technology,the influences of the nozzle internal structure on the spray and flame asymmetry are studied in the constructed supercritical *** is found that the asymmetry of the inlet angle and the equivalent length-diameter ratio is positively correlated with the inconsistency of the dual *** an increase in the injection pressure and nozzle diameter,the asymmetry of the dual spray becomes more pronounced,resulting in greater disparities in the ignition delay times and ignition positions of the two ***,the increase in nozzle diameter also leads to combustion instability,resulting in a flame with a serrated *** the increase of ambient temperature,the proportion of liquid phase in the jet decreases and the relative density of spray front decreases.

关键词： atomization dual-orifice nozzle nozzle structure spray flame asymmetry

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

SYNERGISTIC EFFECTS OF NOVOLAC-BASED CHAR FORMER WITH A PHOSPHORUS/NITROGEN-CONTAINING flame RETARD ANT IN POLYAMIDE 6

引用

Chinese Journal of Polymer Science 2012年第1期30卷 72-81页

作者： Wei-cheng Xiong Li Chen De-yi Wang Fei Song Yu-zhong Wang Center for Degradation an-d flame--retardant Polymeric materials College of-Chemistry State Key Laboratory of Polymer Materials Engineering National Engineering Laboratory of Eco-Friendly Polymeric Materials （Sichuan） Sichuan University Chengdu 610064 China

The synergistic effect of phosphorus oxynitride（PON） with a novolac-based char former modified by salification （NA-metal salt） on the flame retardance of polyamide 6（PA6） was *** this purpose,various flame-retardant PA6 systems were melt-compounded with PON,PON/NA,PON/NA-V_2O_5 and PON/NA-Fe_2O_3,and their flame retardance was evaluated by measuring the limiting oxygen index（LOI） values and UL-94 vertical burning *** results showed that,compared with the PA6/PON/NA system,the combination of two char formers（NA-V_2O_5,NA-Fe_2O_3） with PON could obviously improve the char formation and flame retardance of *** flame retardance and cone calorimetric analyses showed the stronger synergism as well as the better flame retardant performance of PON/NA-Fe_2O_3 flame retardant system. The effects of different char formers on the flame retardance and thermal stability of this system were also discussed.

关键词： Polyamide flame retardance Novolac resin Synergistic effect

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of Nano-Filler on the Thermal and Fire-Resistant Properties of Ethylene-Vinyl Acetate Copolymer

引用

Journal of Beijing Institute of Technology 2010年第2期19卷 237-240页

作者：杜建新郝建薇崔艳霞 national laboratory of flame retardant materials Beijing Institute of Technology Beijing Add-Tech Consulting Company Limited

Sepiolite （S9, B10, B20, B40） and boehmite have been added to an intumecent flame retardant （IFR） system to produce the halogen-free and fire-resistant ethylene-vinyl acetate copolymer （EVM） rubber. The rubber contains ammonium polyphosphate （APP） as acid source, double pentaerythritol （D-PER） as carbon source and melamine （MN） as gas source. The effects of nano-filler sepiolite and boehmite on the fire-resistant property of EVM rubber based on IFR system were investigated. The test results show that the system with nano-filler of sepiolite B10 has the best fire-resistant property. The process of smoke emission and thermal decomposition, the element composition of char surface and the micro morphology of intumecent char layer of the EVM IFR system with nano-filler were also studied by NBS chamber, thermogravimetric （TG） analysis, X- ray photoelectron spectroscopy （XPS） and scanning electron microscope （SEM）.

关键词： ethylene-vinyl acetate copolymer (EVM) sepiolite boehmite nano-filler intumecent flame retardant (IFR)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Molecule‑Level Multiscale Design of Nonflammable Gel Polymer Electrolyte to Build Stable SEI/CEI for Lithium Metal Battery

引用

Nano-Micro Letters 2025年第1期17卷 404-423页

作者： Qiqi Sun Zelong Gong Tao Zhang Jiafeng Li Xianli Zhu Ruixiao Zhu Lingxu Wang Leyuan Ma Xuehui Li Miaofa Yuan Zhiwei Zhang Luyuan Zhang Zhao Qian Longwei Yin Rajeev Ahuja Chengxiang Wang Key laboratory for Liquid‑Solid Structural Evolution and Processing of materials(Ministry of Education) School of Materials Science and EngineeringShandong UniversityJinan 250061People’s Republic of China Condensed Matter Theory Department of Physics and AstronomyUppsala UniversityUppsala 75120Sweden

The risk of flammability is an unavoidable issue for gel polymer electrolytes(GPEs).Usually,flameretardant solvents are necessary to be used,but most of them would react with anode/cathode easily and cause serious interfacial instability,which is a big challenge for design and application of nonflammable ***,a nonflammable GPE(SGPE)is developed by in situ polymerizing trifluoroethyl methacrylate(TFMA)monomers with flame-retardant triethyl phosphate(TEP)solvents and LiTFSI–LiDFOB dual lithium *** is strongly anchored to PTFMA matrix via polarity interaction between-P=O and-CH_(2)CF_(3).It reduces free TEP molecules,which obviously mitigates interfacial reactions,and enhances flame-retardant performance of TEP *** TEP molecules are also inhibited in solvation of Li^(+),leading to anion-dominated solvation sheath,which creates inorganic-rich solid electrolyte interface/cathode electrolyte interface *** coordination structure changes Li^(+)transport from sluggish vehicular to fast structural transport,raising ionic conductivity to 1.03 mS cm^(-1) and transfer number to 0.41 at 30℃.The Li|SGPE|Li cell presents highly reversible Li stripping/plating performance for over 1000 h at 0.1 mA cm^(−2),and 4.2 V LiCoO_(2)|SGPE|Li battery delivers high average specific capacity>120 mAh g^(−1) over 200 *** study paves a new way to make nonflammable GPE that is compatible with Li metal anode.

关键词： Anchoring effect Nonflammable gel electrolyte In situ cross-linked Electrode-electrolyte interface Li metal battery

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

AN S-AND P-CONTAINING flame retardant FOR POLYPROPYLENE

引用

Chinese Journal of Polymer Science 2008年第3期26卷 299-309页

作者：王玉忠 Center for Degradable and flame-retardant Polymeric materials College of ChemistrySichuan UniversityChengdu 610064China

A novel charring agent,bis(1-oxo-4-hydroxymethyl-2,6,7-trioxa-1-phosphabicyclo[2.2.2]octane) phenylphosphine sulfide (BCPPS),has been synthesized,and it is combined with ammonium polyphosphate (APP) and melamine phosphate (MP) to impart flame retardance and dripping resistance for polypropylene (PP).The fire performance of the treated PP is investigated by limiting oxygen index (LOI),vertical burning test (UL-94) and cone calorimeter,and the thermal stability and thermal oxidative stability of the composite...

关键词： Polypropylene Intumescent flame retardant Cone calorimeter Thermal analysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Comparative study of the effect of Cu_2O and MoO_3 on flame retardance and smoke emission of PVC by Cone and TGA

引用

Chinese Science Bulletin 1998年第13期43卷 1090-1094页

作者： LI Bin\+1 and WANG Jianqi\+2 1. Department of Chemistry, Northeast Forestry University, Harbin 150040, China 2. national laboratory of flame retardant materials, Beijing Institute of Technology, Beijing, 100081, China Department of Chemistry Northeast Forestry University Harbin China national laboratory of flame retardant materials Beijing Institute of Technology Beijing China

Cuprous and molybdic oxides exhibit extremely effectiveness in smoke suppression for PVC. However, few are the data reported concerning flame retardance and smoke emission of PVC taken from Cone calorimetry relative to the conventional thermal analysis technique. Abundant data from Cone calorimetry have been acquired. Data analysis was achieved through the study of MLR, HRR, SEA tested at irradiance of 25 kWm -2 . The understandable flame retardance of PVC/Cu\-2O and PVC/MoO\-3 relative to pure PVC has been rationalized by their lowered heat release rates and enhanced char residues. The difference in smoke reduction between these two oxides consists in the time scale. As clearly seen under air atmosphere both oxides exert themselves to the afterglow which has been recognized as a dangerous source, in particular in the full_scale fire situation.

关键词： cone calorimetry poly(vinyl chloride) flame retardation smoke emission cuprous oxide molybdic oxide.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preparation of polymer nanocomposites with enhanced mechanical properties using hybrid of graphene and partially wrapped multi-wall carbon nanotube as nanofiller

引用

Chinese Chemical Letters 2017年第2期28卷 201-205页

作者： Jiao You Jiang-Yong-Quan Cao Si-Chong Chen Yu-Zhong Wang Center for Degradable and flame-retardant Polymeric materials State Key Laboratory of Polymer Materials Engineering College of Chemistry National Engineering Laboratory of Eco-Friendly Polymeric Materials (Sichuan) Sichuan University Chengdu 610064 China

Triblock copolymer of poly（p-dioxanone） and polyethylene glycol end-capped with pyrene moieties（（Py-PPDO）_2-b-PEG） was synthesized and used as modifier for multi-wall carbon nanotubes（MWCNTs）.Nano-aggregates（（Py-PPDO）_2-b-PEG@MWCNTs） with shish-kebab like partially wrapped morphology and very good stability were obtained by incorporating the copolymer with *** bare MWCNT sections of（Py-PPDO）_2-b-PEG@MWCNTs were able to induce n-n interactions with graphene（GE） and resulted in a novel GE/（Py-PPDO）_2-b-PEG@MWCNTs *** dispersity of GE in solution or polymer matrix was therefore greatly *** PCL nanocomposite films using GE/（Py-PPDO）_2-bPEG@MWCNTs as hybrid nanofiller exhibited obviously improved mechanical properties especially at very low hybrid nanofiller *** influence of the nanofiller content and feed ratio of GE/MWCNTs on the mechanical properties of composites films was *** the feed ratio of GE to MWCNTs is 2：8 and the total loading of nanofiller is only 0.01 wt%,the tensile strength of the composite film increased by 163%and the elongation at break increased by 17% compared to those of neat PCL These results can be attributed to fine dispersion of the nanofillers in PCL matrix and the hybrid interactions between GE and ***,this work provides a novel method for preparing polymer nanocomposites with high mechanical performance and low nanofiller loading.

关键词： Carbon nanotube Graphene Pyrene end-capped Poly(p-dioxanone)-block-polyethylene glycol triblock copolymer Hybrid nanofiller Nanocomposite

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of Lithium Nitrate on the Structure and Property of α-Al2O3 Platelets Prepared via Solid-state Reaction

引用

China Petroleum Processing & Petrochemical Technology 2017年第2期19卷 8-13页

作者： Miao Zhuang Shi Jiangong Miao Qingyuan Hao Jianwei Zhang Yi Zhang Wenping SINOPEC Catalyst Beijing Co. Ltd. Beijing 102500 national laboratory of flame retardant materials National Engineering and Technology Research Center of Flame Retardant Materials Beijing Institute of Technology Beijing 100081 Production and Technology Department Sinopec Catalyst Co. Ltd. Beijing 100029

The α-Al_2O_3 platelets were prepared via solid-state reactions and the effect of the amount of lithium nitrate additive on the property of the platelets was investigated. The ICP results indicated that the high temperature calcination process resulted in a large loss of lithium species because of volatilization, but there was still a small amount of residual lithium species in the α-Al_2O_3 platelets. The SEM micrographs showed that lithium nitrate led to decrease in the thickness of α-Al_2O_3 platelets and irregular morphology of aggregates. Pore structures results exhibited that addition of lithium nitrate led to decrease in the pore size and increase in the specific surface area of aggregates of α-Al_2O_3 platelets. The XRD and IR patterns suggested that the residual lithium and aluminum oxide formed LiAl_5O_8. The existence of LiAl_5O_8 was the basic reason for the changed performance of α-Al_2O_3 platelets.

关键词： solid-state reaction α-Al2O3 platelets LiNO3 property

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Determination of the solubility parameter of cellulose acrylate using inverse gas chromatography

引用

Chinese Science Bulletin 2007年第22期52卷 3051-3055页

作者： ZHAO Shu ZHANG Fei ZHANG WenWen SHI BaoLi Heilongjiang Key laboratory of Molecule Design and Preparation of flame retardant materials Northeast Forestry University Harbin 150040 China

The solubility parameters of cellulose acrylate substituted degree 2.12(CEA) have been calculated from the measured retention data by inverse gas chromatography at various temperatures. The weight frac-tion activity coefficients of the solvents at infinite dilution(Ω1∞),the Flory-Huggins thermodynamic in-teraction parameters between CEA and solvents(χ 1∞2),the excess molar heats of mixing(△H1s),the par-tial molar heats of mixing at infinite dilution(△H1∞),the solubility parameters of solvent(δ1),and the solubility parameters of CEA(δ2),were calculated at various temperatures. The δ2 of the CEA was 17.32,18.00,18.13,18.54,19.39 at 55,60,65,70 and 75℃,respectively.

关键词：溶解参数纤维素丙烯酸盐套色版

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：