检索结果-南通市图书馆

A thermo-mechanical simulation for the stability analysis of a horizontal wellbore in underground coal gasification

在线全文

学校读者我要写书评

暂无评论

petroleum 2024年第2期10卷 243-253页

作者： Mohammadreza Shahbazi Mehdi Najafi Mohammad Fatehi Marji Ramin Rafiee department of mining and metallurgical Eng. Yazd UniversityYazdIran department of mining Petroleum&Geophysics Eng.Shahrood University of TechnologyShahroodIran

The stability analysis of horizontal wells is essential for a successful underground coal gasification(UCG)*** this paper,a new 3D coupled thermo-mechanical numerical modeling is proposed for analyzing the stability of UCG horizontal *** this model,the effect of front abutment stresses,syngas pressure,syngas temperature and thermal stresses is considered to predict the mud weight window and drilling mud pressure during UCG *** results show that the roof caving in UCG panel has a greatest impact on the stability of horizontal ***,when the time of coal gasification is increased,the well convergence increases and for more stability it is necessary to increase the drilling mud *** research was carried out on the M2 coal seam in Mazino coal deposit(Iran).The results showed that the mud weight window for horizontal well drilling is between 0 and 33 *** appropriate stress for the maximum stability of the horizontal well,taking all the thermal and mechanical parameters into account,is 28 *** suggested numerical method is a comprehensive and consistent way for analyzing the stability of horizontal wells in UCG sites.

关键词： Underground coal gasification Thermo-mechanical simulation Numerical modeling Stress distribution Horizontal well

Fractures interaction and propagation mechanism of multi-cluster fracturing on laminated shale oil reservoir

在线全文

学校读者我要写书评

暂无评论

petroleum Science 2024年第4期21卷 2600-2613页

作者： Jia-Xin Lv Bing Hou Key Laboratory of petroleum engineering Ministry of Education China University of Petroleum (Beijing) State Key Laboratory of petroleum Resources and engineering China University of Petroleum (Beijing) department of petroleum engineering China University of Petroleum (Beijing) at Karamay

The continental shale reservoirs of Jurassic Lianggaoshan Formation in Sichuan Basin contain thin lamina, which is characterized by strong plasticity and developed longitudinal shell limestone *** improve the production efficiency of reservoirs by multi-cluster fracturing, it is necessary to consider the unbalanced propagation of hydraulic fractures and the penetration effect of fractures. This paper constructed a numerical model of multi-fracture propagation and penetration based on the finite element coupling cohesive zone method; considering the construction cluster spacing, pump rate,lamina strength and other parameters studied the influencing factors of multi-cluster fracture interaction propagation; combined with AE energy data and fracture mode reconstruction method, quantitatively characterized the comprehensive impact of the strength of thin interlayer rock interfaces on the initiation and propagation of fractures that penetrate layers, and accurately predicted the propagation pattern of hydraulic fractures through laminated shale oil reservoirs. Simulation results revealed that in the process of multi-cluster fracturing, the proportion of shear damage is low, and mainly occurs in bedding fractures activated by outer fractures. Reducing the cluster spacing enhances the fracture system's penetration ability, though it lowers the activation efficiency of lamina. The high plasticity of the limestone interlayer may impact the vertical propagation distance of the main fracture. Improving the interface strength is beneficial to the reconstruction of the fracture height, but the interface communication effect is limited. Reasonable selection of layers with moderate lamina strength for fracturing stimulation, increasing the pump rate during fracturing and setting the cluster spacing reasonably are beneficial to improve the effect of reservoir stimulation.

关键词： Laminated shale Multi-cluster fracturing Cross-layer Cohesive zone model Acoustic emission technique

Enhanced heavy and extra heavy oil recovery:Current status and new trends

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

petroleum 2024年第3期10卷 399-410页

作者： Sayed Gomaa Khalaf G.Salem A.N.El-hoshoudy mining and petroleum engineering department Faculty of EngineeringAl-Azhar UniversityEgypt department of Reservoir engineering South Valley Egyptian Petroleum Holding Company(GANOPE)CairoEgypt PVT Lab-Production department Egyptian Petroleum Research Institute(EPRI)Cairo 11727Egypt PVT-Service Center Egyptian Petroleum Research Institute(EPRI)Cairo 11727Egypt

Due to the increased demand for energy resources these days,especially due to the Russian-Ukrainian war,the focus of the major countries is turning strongly towards improving oil production,especially heavy and extra heavy oil,which represents 40%of the world oil ***-based and thermal(EOR)procedures are promising techniques for recovering heavy oil reservoirs,but they suffer from a sequence of problems and complications that arise after long-term *** complications comprise steam breakthrough,steam overlap,and steam/rock *** research presents the currently applied techniques to maximize the productivity of heavy oil,such as steam injection,cyclic steam stimulation,in-situ combustion,and steam-assisted gravity *** technologies face numerous obstacles,as they are energy and water-intensive processes that are not environmentally *** research also presents future trends in energy-saving and environmentally friendly techniques that enhance heavy oil recovery through vapor extraction(VAPEX)steam-solvent hybrid techniques,electromagnetic energy,sonication,and *** findings of this review reported that all the presented techniques focus on how to reduce the oil viscosity and in-situ upgrade the crude oil *** turn,these enhance both the productivity rate and oil recovery and minimize the production *** article can be considered a comprehensive review of thermal recovery methods in heavy and extra-heavy oil,in addition to screening criteria used for each method.

关键词： Enhanced oil recovery Heavy crude oil Steam flood Hybrid techniques Nanotechnology

An efficient data-driven global sensitivity analysis method of shale gas production through convolutional neural network

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

petroleum Science 2024年第4期21卷 2475-2484页

作者： Liang Xue Shuai Xu Jie Nie Ji Qin Jiang-Xia Han Yue-Tian Liu Qin-Zhuo Liao State Key Laboratory of petroleum Resources and engineering China University of Petroleum (Beijing) department of Oil-Gas Field Development engineering College of Petroleum Engineering China University of Petroleum (Beijing) Chuanqing Drilling engineering Co.Ltd. China National Petroleum Corporation

The shale gas development process is complex in terms of its flow mechanisms and the accuracy of the production forecasting is influenced by geological parameters and engineering parameters. Therefore, to quantitatively evaluate the relative importance of model parameters on the production forecasting performance, sensitivity analysis of parameters is required. The parameters are ranked according to the sensitivity coefficients for the subsequent optimization scheme design. A data-driven global sensitivity analysis(GSA) method using convolutional neural networks(CNN) is proposed to identify the influencing parameters in shale gas production. The CNN is trained on a large dataset, validated against numerical simulations, and utilized as a surrogate model for efficient sensitivity analysis. Our approach integrates CNN with the Sobol' global sensitivity analysis method, presenting three key scenarios for sensitivity analysis: analysis of the production stage as a whole, analysis by fixed time intervals, and analysis by declining rate. The findings underscore the predominant influence of reservoir thickness and well length on shale gas production. Furthermore, the temporal sensitivity analysis reveals the dynamic shifts in parameter importance across the distinct production stages.

关键词： Shale gas Global sensitivity Convolutional neural network Data-driven

Pore-scale study of the effects of DTPA chelating agent flooding on oil recovery utilizing a clay-coated micromodel

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

petroleum Research 2024年第2期9卷 228-237页

作者： Hojjat Mohammadzadeh Jamshid Moghadasi Khalil Shahbazi Shahin Kord department of petroleum engineering Ahwaz Faculty of Petroleum EngineeringPetroleum University of TechnologyAhwazIran

The use of diethylenetriaminepentaacetic acid(DTPA)chelating agent has shown promising results for enhanced oil recovery(EOR)in prior *** mechanisms,mainly resulting from rock-fluid interaction,have been proposed for chelating agent flooding;however,little attention has been paid to fluid-fluid interaction thus *** assessment of these mechanisms has primarily relied on macroscopic techniques such as core *** paper aims to investigate the injection of DTPA brine and its dominant mechanisms at the pore scale using a clay-coated *** micromodel tests were performed under oil-wet and water-wet *** a more precise examination of fluid/fluid interactions,the dynamic interfacial tension(IFT)and Zeta potential were *** was observed that the injection of DTPA brine in water-wet state changed the saturation distribution and increased oil *** on visual inspections,this change in saturation distribution could potentially be linked to the formation of micro-dispersions and viscoelastic interfacial ***-dispersions facilitate flow to unswept areas,and viscoelastic interface formation reshapes the interface between oil and brine,causing disconnected oil droplets to coalesce and thus increase *** the oil-wet state,the micro-dispersion formation and wettability alteration can be the dominant mechanisms,and the amount of recovered oil was higher than that observed in the water-wet ***,Zeta potential measurements at the interface between brine and oil showed a more negative value for DTPA brine,which is effective in wettability alteration and micro-dispersions *** results indicate that IFT reduction was not significant enough to be considered the dominant mechanism,although it assists in DTPA brine penetration into the crude oil and subsequent micro-dispersion formation.

关键词： Enhanced oil recovery technique Chelating agent Micromodel Fluid/fluid interaction Micro-dispersions Viscoelastic interface

Direct microwave leaching conditions of rare earth elements in fluorescent wastes

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第6期42卷 1165-1174,I0007页

作者： A.Bilen B.Birol M.N.Saridede S.S.Kaplan M.S.Sonmez department of metallurgical and Materials engineering Yildiz Technical UniversityIstanbulTurkey department of Chemical engineering and Materials Science Stevens Institute of TechnologyNew JereyUSA department of metallurgical and Materials engineering Istanbul Technical UniversityIstanbulTurkey

The luminescent phosphor powder in the fluorescent lamp constitutes 2%of the lamp’s *** can be mentioned that fluorescent wastes are a crucial raw material to produce rare earth *** the present study,microwave leaching process was conducted to dissolve rare earth elements yttrium(Y),europium(Eu),and remaining rare earth elements(REEs)present in the phosphor powder of the fluorescent *** the yields were *** the microwave leaching process,the effects of the temperature(80-160℃),acid type(hydrochloric acid(HCl),nitric acid(HNO_(3)),sulphuric acid(H_(2)SO_(4))),acid concentration(0.5-6 mol/L),solid to liquid ratio(0.1:10-0.5:10)and reaction time(5-90 min)parameters on leaching efficiencies of varying rare earth elements and calcium were *** highest yield was obtained in the direct microwave leaching of fluorescent waste with the experimental conditions of 6 mol/L HCl,160℃,0.1:10 solid-to-liquid ratio(S:L),and 90 *** energy calculations were made,and kinetic models of the reactions were obtained,and it is observed that Y and Eu dissolution is diffusion-controlled,on the other hand,lanthanum(La),cerium(Ce),and terbium(Tb)were examined to be chemical reaction ***,calcium(Ca)and gadolinium(Gd)seem coherent with the mixed ***,mathematical models of all experimental studies are created with the response surface Box-Behnken method and the correlation coefficients of all the models are over 90%.

关键词： Rare earth elements(REEs) Direct microwave leaching Fluorescent waste Kinetic models Response surface method

Enhanced in-vitro degradation resistance and cytocompatibility of a thermomechanically processed novel Mg alloy:Insights into the role of microstructural attributes

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 700-725页

作者： Darothi Bairagi Santanu Mandal Mangal Roy Manas Paliwal Sumantra Mandal department of metallurgical and Materials engineering Indian Institute of TechnologyKharagpur 721302India

The role of microstructural features on in-vitro degradation and surface film development of a thermomechanically processed Mg-4Zn-0.5Ca-0.8Mn alloy has been investigated employing electrochemical studies,scanning electron microscopy and X-ray photoelectron *** specimen forged at 523 K temperature developed a coarse unimodal microstructure consisting of basal oriented grains,whereas the specimens forged at 623 K and 723 K temperatures exhibited bimodal microstructures containing randomly oriented fine grains and basal oriented coarse *** bimodal microstructures exerted higher resistance to corrosion compared to the unimodal microstructure in presence of a protective surface *** optimum size distribution of fine and coarse grains as well as the prevalence of basal oriented grains led to the lowest anodic current density in the specimen forged at 623 *** morphology of Ca_(2)Mg_(6)Zn_(3)precipitates governed the cathodic kinetics by controlling the anode to cathode surface area *** the specimen forged at 723 K comprised comparatively lower fraction of precipitates than at 623 K,the mesh-like precipitate morphology increased the effective cathodic surface area,leading to enhanced localised corrosion in the former *** microstructural features developed at 623 K forging temperature formed a well-protective surface film with lower Mg(OH)_(2)to MgO ratio,exhibiting distinctly high polarization resistance and superior cytocompatibility in terms of cell-proliferation and cell-differentiation.

关键词： Magnesium alloy Microstructure Corrosion Electrochemical impedance spectroscopy X-ray photoelectron spectroscopy Cytotoxicity

A unified fractional flow framework for predicting the liquid holdup in two-phase pipe flows

在线全文

学校读者我要写书评

暂无评论

petroleum Science 2024年第4期21卷 2614-2624页

作者： Fuqiao Bai Yingda Lu Mukul M.Sharma Hildebrand department of petroleum and Geosystems engineering The University of Texas at Austin

Two-phase pipe flow occurs frequently in oil & gas industry, nuclear power plants, and CCUS. Reliable calculations of gas void fraction(or liquid holdup) play a central role in two-phase pipe flow models. In this paper we apply the fractional flow theory to multiphase flow in pipes and present a unified modeling framework for predicting the fluid phase volume fractions over a broad range of pipe flow conditions. Compared to existing methods and correlations, this new framework provides a simple,approximate, and efficient way to estimate the phase volume fraction in two-phase pipe flow without invoking flow patterns. Notably, existing correlations for estimating phase volume fraction can be transformed and expressed under this modeling framework. Different fractional flow models are applicable to different flow conditions, and they demonstrate good agreement against experimental data within 5% errors when compared with an experimental database comprising of 2754 data groups from 14literature sources, covering various pipe geometries, flow patterns, fluid properties and flow *** gas void fraction predicted by the framework developed in this work can be used as inputs to reliably model the hydraulic and thermal behaviors of two-phase pipe flows.

关键词： Pipe fractional flow Liquid holdup Multiphase pipe flow Gas void fraction

Effect of turbulent fluctuation on the ignition of millimeter particle:Experimental studies and numerical modelling with a new correlation of nusselt number Author links open overlay panel

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第8期91卷 168-175页

作者： Lele Feng Jie Liu Haihui Xin Liangliang Jiang Yuxin Wu Saeideh Babaee Jiangsu Key Laboratory of Coal-based Greenhouse Gas Control and Utilization China University of Mining and TechnologyXuzhou221008China School of Safety engineering China University of Mining and TechnologyXuzhou221116China Key Laboratory of Hubei Province for Coal Conversion and New Carbon Materials Wuhan University of Science and TechnologyWuhan430000China department of Chemical and petroleum engineering University of CalgaryCalgaryAlbertaCanada department of Energy and Power engineering Tsinghua UniversityBeijing100084China department of Chemical and metallurgical engineering University of the WitwatersrandJohannesburgSouth Africa

Understanding the influencing mechanism of turbulent fluctuation on the ignition characteristics of millimeter coal particles is *** this work,to study the effect of turbulent fluctuation on ignition time,millimeter coal particles are subjected to a specific flow field,generated in a furnace with symmetric fans.A one-dimensional model with the new proposed correlation and the Ranz-Marshall(R-M)correlation for Nu(Nusselt number)is established to simulate the coal ignition *** addition,the effects of fan speed,temperature,particle diameter,particle distance and coal type on the ignition time are *** is found that an increase in fan speed from 0 to 3000 rpm leads to a particle Reynolds number Re_(p)increase from 0 to 22.5,and a turbulent particle Reynolds number Re_(t)*increase from 0 to *** a consideration of the fluctuation effect,the new correlation of Nu gives a better prediction of ignition time compared to the R-M ***,the ignition time is revealed to decrease with an increasing fan speed and an elevating *** the ignition time shows merely an initial boost with enlarging particle distance,it exhibits a linearity with the term of particle diameter dp1.3-1.7 and Reynolds numbers(Nu*/Nu)-0.6(Nu*is turbulent Nusselt number).Based on this relationship,the difference of predicted ignition time is calculated at different Re_(p)and Re_(t)*.It is shown that at low Re_(p)or high Re_(t)*values,the new correlation should substitute for the R-M correlation.

关键词： Turbulent fluctuation Particle heat transfer Empirical correlation Coal ignition