检索结果-南通市图书馆

Direct microwave leaching conditions of rare earth elements in fluorescent wastes

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第6期42卷 1165-1174,I0007页

作者： A.Bilen B.Birol M.N.Saridede S.S.Kaplan M.S.Sonmez department of metallurgical and Materials engineering Yildiz Technical UniversityIstanbulTurkey department of Chemical engineering and Materials Science Stevens Institute of TechnologyNew JereyUSA department of metallurgical and Materials engineering Istanbul Technical UniversityIstanbulTurkey

The luminescent phosphor powder in the fluorescent lamp constitutes 2%of the lamp’s *** can be mentioned that fluorescent wastes are a crucial raw material to produce rare earth *** the present study,microwave leaching process was conducted to dissolve rare earth elements yttrium(Y),europium(Eu),and remaining rare earth elements(REEs)present in the phosphor powder of the fluorescent *** the yields were *** the microwave leaching process,the effects of the temperature(80-160℃),acid type(hydrochloric acid(HCl),nitric acid(HNO_(3)),sulphuric acid(H_(2)SO_(4))),acid concentration(0.5-6 mol/L),solid to liquid ratio(0.1:10-0.5:10)and reaction time(5-90 min)parameters on leaching efficiencies of varying rare earth elements and calcium were *** highest yield was obtained in the direct microwave leaching of fluorescent waste with the experimental conditions of 6 mol/L HCl,160℃,0.1:10 solid-to-liquid ratio(S:L),and 90 *** energy calculations were made,and kinetic models of the reactions were obtained,and it is observed that Y and Eu dissolution is diffusion-controlled,on the other hand,lanthanum(La),cerium(Ce),and terbium(Tb)were examined to be chemical reaction ***,calcium(Ca)and gadolinium(Gd)seem coherent with the mixed ***,mathematical models of all experimental studies are created with the response surface Box-Behnken method and the correlation coefficients of all the models are over 90%.

关键词： Rare earth elements(REEs) Direct microwave leaching Fluorescent waste Kinetic models Response surface method

Revisiting the theoretical prediction of the explosive performance found by the Trauzl test

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第6期36卷 163-174页

作者： Ivana Dobrilovic Mario Dobrilovic Muhamed Suceska Faculty of mining Geology and Petroleum EngineeringDepartment of Mining Engineering and GeotechnicsUniversity of ZagrebPierottijeva 6Zagreb10000Croatia

The Trauzl lead block test allows the determination of the approximate performance of explosives in blasting applications by measuring the volume increase(expansion)that is produced by the detonation of an explosive charge in the cavity of a lead *** this paper,we reconsider the possibility of interpreting the Trauzl test results in terms of detonation parameters or *** detonation parameters used in the analysis are calculated using the thermochemical code EXPLO5,while the hydrocode AUTODYN is used to simulate the effect of explosive charge density and reaction rate on the results of the Trauzl *** increase in the volume of the lead block cavity was found to correlate best with the product of the detonation heat and the root of the volume of detonation *** simulation showed that the density of explosive charge and the rate of explosive decomposition affect the dynamics of the interaction of the detonation product and the lead block,and consequently the lead block cavity volume increase.

关键词： Trauzl lead block test Performance of explosives EXPLO5 AUTODYN Detonation heat

Enhanced in-vitro degradation resistance and cytocompatibility of a thermomechanically processed novel Mg alloy:Insights into the role of microstructural attributes

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 700-725页

作者： Darothi Bairagi Santanu Mandal Mangal Roy Manas Paliwal Sumantra Mandal department of metallurgical and Materials engineering Indian Institute of TechnologyKharagpur 721302India

The role of microstructural features on in-vitro degradation and surface film development of a thermomechanically processed Mg-4Zn-0.5Ca-0.8Mn alloy has been investigated employing electrochemical studies,scanning electron microscopy and X-ray photoelectron *** specimen forged at 523 K temperature developed a coarse unimodal microstructure consisting of basal oriented grains,whereas the specimens forged at 623 K and 723 K temperatures exhibited bimodal microstructures containing randomly oriented fine grains and basal oriented coarse *** bimodal microstructures exerted higher resistance to corrosion compared to the unimodal microstructure in presence of a protective surface *** optimum size distribution of fine and coarse grains as well as the prevalence of basal oriented grains led to the lowest anodic current density in the specimen forged at 623 *** morphology of Ca_(2)Mg_(6)Zn_(3)precipitates governed the cathodic kinetics by controlling the anode to cathode surface area *** the specimen forged at 723 K comprised comparatively lower fraction of precipitates than at 623 K,the mesh-like precipitate morphology increased the effective cathodic surface area,leading to enhanced localised corrosion in the former *** microstructural features developed at 623 K forging temperature formed a well-protective surface film with lower Mg(OH)_(2)to MgO ratio,exhibiting distinctly high polarization resistance and superior cytocompatibility in terms of cell-proliferation and cell-differentiation.

关键词： Magnesium alloy Microstructure Corrosion Electrochemical impedance spectroscopy X-ray photoelectron spectroscopy Cytotoxicity

Dielectric size optimization for high power density in large-scale triboelectric nanogenerators

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第9期17卷 8455-8464页

作者： Abdulkerim Karabiber Ömer Dirik Feyyaz Koc Faruk Ozel department of Electrical and Electronics engineering Bingol UniversityBingol 12000Turkey department of metallurgical and Materials engineering Karamanoglu Mehmetbey UniversityKaraman 70200Turkey

Triboelectric nanogenerators(TENGs)have emerged as a promising technology to harvest electrical energy from natural motions such as human movement,wind,and water *** TENGs show significant potential in small-scale applications,developing large-scale TENGs capable of generating high power remains a significant *** factors that can affect the performance of large-scale TENGs are being investigated to overcome this challenge,including the size and configuration of dielectric *** study optimizes dielectrics regarding surface area,thickness,and multicell configuration to improve harvested electrical power density in large-scale *** the studies,glass fiber was used as the positive dielectric,and multipurpose white silicone was used as the negative dielectric because of their high tribo-potential,durability,and easy *** the size optimization phase,dielectric thicknesses and surface areas that provide the maximum power density were ***,horizontal and vertical multicell configurations were examined to efficiently integrate size-optimized *** results reveal that large-scale TENGs with vertical multicell configurations can achieve high and usable energy density for *** findings provide valuable insight into the development of large-scale TENGs with advanced power generation capabilities.

关键词： triboelectric nanogenerator dielectric layer size optimization multi-cell structure high power density

Slope stability of reclaimed coal mines through a new water filling index

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical engineering 2024年第3期16卷 828-839页

作者： Antonios Mikroutsikos Alexandros I.Theocharis Nikolaos C.Koukouzas Ioannis E.Zevgolis Chemical Process&Energy Resources Institute Centre for Research&Technology HellasAthensGreece School of mining and metallurgical engineering National Technical University of AthensAthensGreece

A common reclamation practice for closed coal surface mines is filling them with water to form pit *** creation and sustainability of these lakes are significantly affected by the stability of the corresponding *** present study provides a general framework for analyzing the water filling’s effect on slope stability based on a new water filling index,which can indirectly consider the factors affecting the process and efficiently quantify the filling speed’s *** assumptions of the proposed approach are thoroughly discussed,and the range of the water filling index is ***,the safety factor is calculated using the finite element method with the shear strength reduction technique during the filling process for various conditions(soil properties,slope geometry,hydraulic conditions,and water filling speed).Results are presented as normalized stability charts for practical *** the water filling,the stability gradually decreases until the reservoir reaches a critical level of 10%e40%of the total height;it then increases to even more stable conditions than the initial ***,the present analysis allows for the preliminary stability evaluation of a coal mine during the formation of a pit lake and the appropriate quantification of the water filling’s effect.

关键词： Post-coal era Open-pit flooding Stability charts Critical level

Advancing respirable coal mine dust source apportionment:a preliminary laboratory exploration of optical microscopy as a novel monitoring tool

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Coal Science & Technology 2024年第2期11卷 222-233页

作者： Nestor Santa Emily Sarver department of mining and Minerals engineering Virginia TechBlacksburgVA 24061USA

Exposure to respirable coal mine dust(RCMD)can cause chronic and debilitating lung ***-time monitoring capabilities are sought which can enable a better understanding of dust components and *** many underground mines,RCMD includes three primary components which can be loosely associated with three major dust sources:coal dust from the coal seam itself,silicates from the surrounding rock strata,and carbonates from the inert‘rock dust’products that are applied to mitigate explosion hazards.A monitor which can reliably partition RCMD between these three components could thus allow source *** tracking silicates,specifically,could be valuable since the most serious health risks are typically associated with this component-particularly if abundant in crystalline *** a monitoring concept based on field microscopy,and following up on prior research using polarized light,the aim of the current study was to build and test a model to classify respirable-sized particles as either coal,silicates,or *** model development,composite dust samples were generated in the laboratory by successively depositing dust from high-purity materials onto a sticky transparent substrate,and imaging after each deposition event such that the identity of each particle was known a *** testing followed a similar approach,except that real geologic materials were used as the source for each dust *** showed that the model had an overall accuracy of 86.5%,indicating that a field-microscopy based moni-tor could support RCMD source apportionment and silicates tracking in some coal mines.

关键词： Polarized light microscopy Image processing Dust monitoring Respirable silica Coal mining

Time-dependent effects in transient liquid phase bonding of 304L and Cp-Ti using an Ag-Cu interlayer

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Central South University 2024年第7期31卷 2237-2255页

作者： Saeed VAZIRIAN Mohammad MOSHKBAR BAKHSHAYESH Ali FARZADI department of Materials and metallurgical engineering Amirkabir University of Technology(Tehran Polytechnic)Tehran 15916-34311Iran

One of the challenges for bimetal manufacturing is the joining ***,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm for bonding time of 20,40,60,and 90 *** bonding temperature of 860℃ was considered,which is under the β transus temperature of *** TLP bonding,various intermetallic compounds(IMCs),including Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe),Ti_(2)(Cu,Ag),and Ti_(2)Cu from 304L toward Cp-Ti formed in the ***,on the one side,with the increase in time,further diffusion of elements decreases the blocky IMCs such as Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe)in the 304L diffusion-affected zone(DAZ)and reaction zone,and on the other side,Ti_(2)(Cu,Ag)IMC transformed into fine morphology toward Cp-Ti *** microhardness test also demonstrated that the(Cr,Fe)_(2)Ti+Ti_(5)Cr_(7)Fe_(17) IMCs in the DAZ on the side of 304L have a hardness value of HV 564,making it the hardest *** maximum and minimum shear strength values are equal to 78.84 and 29.0 MPa,*** cleavage pattern dominated fracture surfaces due to the formation of brittle phases in dissimilar joints.

关键词： diffusion brazing transient liquid phase bonding dissimilar material joints microstructural evolution mechanical properties grade 2 titanium

MgO-attached graphene nanosheet(MgO@GNS)reinforced magnesium matrix nanocomposite with superior mechanical,corrosion and biological performance

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第9期31卷 2062-2076页

作者： S.Abazari A.Shamsipur H.R.Bakhsheshi-Rad M.S.Soheilirad F.Khorashadizade S.S.Mirhosseini department of Materials and metallurgical engineering Amirkabir University of TechnologyTehran ***Iran Iranian National Standards Organization of Hormozgan HormozganIran Advanced Materials Research Center Department of Materials EngineeringNajafabad BranchIslamic Azad UniversityNajafabadIran department of Materials and metallurgical engineering Iran University of Science and TechnologyTehranIran

Magnesium(Mg)alloys are gaining great consideration as body implant materials due to their high biodegradability and ***,they suffer from low corrosion resistance and antibacterial *** this research,semi-powder metallurgy followed by hot extrusion was utilized to produce the magnesium oxide@graphene nanosheets/magnesium(MgO@GNS/Mg)composite to improve mechanical,corrosion and cytocompatibility *** have revealed that the incorporation of MgO@GNS nanohybrids into Mg-based composite enhanced microhardness and compressive *** vitro,osteoblast cell culture tests show that using MgO@GNS nanohybrid fillers enhances osteoblast adhesion and apatite *** presence of MgO@GNS nanoparticles in the composites decreased the opening defects,micro-cracks and micro-pores of the composites thus preventing the penetration of the corrosive solution into the *** demonstrated that the MgO@GNS/Mg composite possesses excellent antibacterial properties because of the combination of the release of MgO and physical damage to bacterium membranes caused by the sharp edges of graphene nanosheets that can effectively damage the cell wall thereby facilitating penetration into the bacterial lipid ***,the MgO@GNS/Mg composite with high mechanical strength,antibacterial activity and corrosion resistance is considered to be a promising material for load-bearing implant applications.

关键词： metal matrix composites MgO@GNS nanohybrid strengthening mechanisms antibacterial activity biocompatibility

Reduction behavior of iron ore powder by high-volatile coal in thermogravimetric-gas chromatographic and kinetic analysis

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第1期31卷 92-107页

作者： Rui-meng Shi Qi-yuan Mi Bin Li Xiao Shi Chong Zou Jing Guo Han-jie Guo School of metallurgical engineering Xi’an University of Architecture and TechnologyXi’an710055ShaanxiChina China International engineering Consulting Corporation Beijing100048China School of metallurgical and Ecological engineering University of Science and Technology BeijingBeijing100083China

The reduction behavior of iron ore powder by high-volatile coal was investigated,and its kinetic mechanism was *** effect of volatiles in coal on the reduction reaction of iron ore was compared by utilizing a Xinjiang lignite with a high volatile content and its pyrolysis carbon produced by high-temperature pyrolysis to remove volatiles,serving as a *** mass loss and gas composition of the samples during the reduction process were detected using thermo-gravimetric analysis and gas chromatography,and the morphological changes of iron ore powder were observed through scanning electron *** kinetic parameters of the iron oxide reduction reaction were calculated by the Flynn-Ozawa-Wall method,and the kinetic mechanism of volatile participation in the iron oxide reduction reaction was determined through the Coats-Redfern *** results indicate that the coupling effect between the high-volatile coal pyrolysis and reduction reactions occurs during the second stage of the entire coupling process,which corresponds to the late stage of coal pyrolysis with a substantial release of H_(2)and *** volatiles in coal actively participated in the reduction reaction,reducing the initiation temperature of the reaction by around 200℃.The reduction of iron oxides by high-volatile coal was jointly promoted by the"hydrogen cycle"and"carbon cycle",resulting in a higher reduction extent and metallization rate at the end of the *** high-volatile coal was used as the reductant,the average activation energy for the entire process was 76.5 kJ/mol,a significant decrease compared to the employment of pyrolysis carbon without volatiles as the reductant(1167 kJ/mol).

关键词： Direct reduction High-volatile coal Volatile Kinetics Reduction mechanism