检索结果-南通市图书馆

Effect of cooling media on bead geometry,microstructure,and mechanical properties of wire arc additive manufactured IN718 alloy

引用

Advances in Manufacturing 2024年第1期12卷 124-149页

作者： Parveen Kumar Satish Kumar Sharma Ratnesh Kumar Raj Singh department of mechanical engineering Thapar Institute of Engineering and TechnologyPatialaPunjab147004India

This work aims to present and explore thermal management techniques for the wire arc additive manufacturing(WAAM)of IN718 *** heat can be mitigated via air or water *** this study,the material was deposited under four different heat-input conditions with air or water *** air cooling,the layer is deposited in a normal atmospheric air environment,whereas with water cooling,the material is deposited inside a water tank by varying the water *** validate the air and water cooling thermal management techniques,IN718 single-pass and multilayer linear walls were deposited using the bidirectional gas metal arc welding based WAAM setup under four different heat input *** the deposition of single layers,the temperature profiles were recorded,and the geometric and microstructural features were *** multilayer wall structures,the mechanical properties(hardness,tensile strength,and elongation)were determined and assessed using the corresponding microstructural features explored through scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),and electron backscatter diffraction(EBSD)*** microstructure observed through SEM analysis in the building direction was found to be nonhomogenous compared with that in the deposition ***,water cooling was found to govern bead characteristics,such as wall width and *** grain size and anisotropy of the mechanical properties also decreased in the water-cooled ***,water cooling is an economical and efficient method to mitigate excessive heat accumulation in WAAM-deposited IN718.

关键词： Air cooling Water cooling IN718 Bead characteristics Microstructure Electron backscatter diffraction(EBSD)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Sequential decay analysis of^(235)U(n^(th),f)reaction using fragmentation approach

引用

Chinese Physics C 2024年第6期48卷 145-154页

作者： Nitin Sharma Ashutosh Kaushik Manoj K.Sharma School of Physics and Materials Science Thapar Institute of Engineering&TechnologyPatiala-147004PunjabIndia

Numerous experimental and theoretical observations have concluded that the probability of the three fragment emission(ternary fission)or binary fission increases when one proceeds towards the heavy mass region of nuclear periodic *** factors affect fragment emission,such as the shell effect,deformation,orientation,and fissility *** and ternary fissions are observed for both ground and excited states of the *** collinear cluster tripartition(CCT)channel of the^(235)U(n^(th),f)reaction is studied,and we observe that the CCT may be a sequential or simultaneous emission *** date,different approaches have been introduced to study the CCT process as a simultaneous or sequential process,but the decay dynamics of these modes have not been not fully *** the three fragments of the sequential process and exploring their related dynamics using an excitation energy dependent approach would be of further ***,in this study,we investigate the sequential decay mechanism of the^(235)U(n^(th),f)reaction using quantum mechanical fragmentation theory(QMFT).The decay mechanism is considered in two steps,where initially,the nucleus splits into an asymmetric *** the second step,the heavy fragment obtained in the first step divides into two *** I analysis is conducted by calculating the fragmentation potential and preformation probability for the spherical and deformed choices of the decaying *** most probable fragment combination of stage I are identified with respect to the dips in the fragmentation structure and the corresponding maxima of the preformation probability(P0).The light fragments of the identified decay channels(obtained in step I)agree closely with the experimentally observed *** excitation energy of the decay channel is calculated using an iteration *** excitation energy is shared using an excitation energy dependent level density *** obtained excitation

关键词： fission cluster radioactivity ternary fission spontaneous fission cluster model total kinetic energy preformation probability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Deep Learning Approach for Landmines Detection Based on Airborne Magnetometry Imaging and Edge Computing

引用

Computer Modeling in engineering & Sciences 2024年第5期139卷 2117-2137页

作者： Ahmed Barnawi Krishan Kumar Neeraj Kumar Bander Alzahrani Amal Almansour Faculty of Computing and Information Technology King Abdulaziz UniversityJeddahSaudi Arabia department of Computer Science and engineering Thapar Institute of Engineering and TechnologyDeemed to be UniversityPatialaIndia

Landmines continue to pose an ongoing threat in various regions around the world,with countless buried landmines affecting numerous human *** detonation of these landmines results in thousands of casualties reported worldwide ***,there is a pressing need to employ diverse landmine detection techniques for their *** effective approach for landmine detection is UAV(Unmanned Aerial Vehicle)based AirborneMagnetometry,which identifies magnetic anomalies in the local terrestrial magnetic *** can generate a contour plot or heat map that visually represents the magnetic field *** the effectiveness of this approach,landmine removal remains a challenging and resource-intensive task,fraughtwith *** computing,on the other hand,can play a crucial role in critical drone monitoring applications like landmine *** processing data locally on a nearby edge server,edge computing can reduce communication latency and bandwidth requirements,allowing real-time analysis of magnetic field *** enables faster decision-making and more efficient landmine detection,potentially saving lives and minimizing the risks involved in the ***,edge computing can provide enhanced security and privacy by keeping sensitive data close to the source,reducing the chances of data exposure during *** paper introduces the MAGnetometry Imaging based Classification System(MAGICS),a fully automated UAV-based system designed for landmine and buried object detection and *** have developed an efficient deep learning-based strategy for automatic image classification using magnetometry dataset *** simulating the proposal in various network scenarios,we have successfully detected landmine signatures present in themagnetometry *** trained models exhibit significant performance improvements,achieving a maximum mean average precision value of 97.8%.

关键词： CNN deep learning landmine detection magnetometer mean average precision UAV

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Analysis and Optimization of Operational and Pollutant Attributes of Diesel Engine with CNT-Infused Orange Peel Biodiesel-Diesel Blend Fuel

引用

Journal of Thermal Science 2024年第2期33卷 761-778页

作者： Ranjeet RAI R.R.SAHOO mechanical engineering department GLA UniversityMathura281406India mechanical engineering department IIT(BHU)Varanasi221005India

The current study is performed to find sustainable solutions for the future of transportation and environmental *** conventional methods and experimental design table(L16 Orthogonal Array)techniques have been employed to examine and optimize a diesel-powered engine's operational and pollutant *** L16 Orthogonal Array is obtained through Taguchi's experimental design approach using Minitab 16 *** experimental design incorporated three control variables,namely engine speed,fuel type,and engine load,each with four *** operational parameters,namely brake thermal efficiency(BTE)and brake specific fuel consumption(BSFC),as well as the emission characteristics,including hydrocarbon(HC),carbon monoxide(CO),nitrogen oxide(NO),and smoke emissions,were acquired using the L16 orthogonal array(OA) and subsequently *** utilization of methodologies such as signal-to-noise(S/N) ratio and grey analysis was employed to determine the optimal operational state of the engine to achieve maximum performance while minimizing *** engine's ideal state of operation,in terms of BTE and BSFC,was determined to be at 75% engine load,1000 r/min engine speed,and using 10^(-4)(in vol) carbon nanotube incorporated 20% orange peel biodiesel(OPB20CNT100) blended fuel(A3-B1-C4).The study indicated that engine load significantly influenced BTE and BSFC,with 84.05% and 87.79% contribution factors,*** 25% engine load,1000 r/min,and OPB20CNT100 fuel(A1-B1-C4) CO,smoke,NO,and HC emissions were the *** load affects emissions the *** BSFC increased 3.10% and NO emissions 1.77%.BTE,CO,smoke,and HC emissions decreased by 1.9%,12.29%,47.05%,and 47.22%,respectively,at optimal operating conditions concerning diesel *** study shows that Taguchi-Grey's experimental design optimizes diesel engine operational and pollutant *** outcomes revealed that orange peel biodiesel infused with CNT can replace diesel fuel in a

关键词： Taguchi-Grey method OPB20CNT100 transesterification S/N ratio GRG HC CO and NO

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Free vibration and buckling analysis of polymeric composite beams reinforced by functionally graded bamboo fbers

引用

Applied Mathematics and Mechanics(English Edition) 2024年第3期45卷 543-562页

作者： H.M.FEIZABAD M.H.YAS department of mechanical engineering Razi UniversityKermanshah ***Iran

Natural fibers have been extensively researched as reinforcement materials in polymers on account of their environmental and economic advantages in comparison with synthetic fibers in the recent *** fibers are renowned for their good mechanical properties,abundance,and short cycle *** beams are one of the fundamental structural components and are susceptible to mechanical loads in engineering applications,this paper performs a study on the free vibration and buckling responses of bamboo fiber reinforced composite(BFRC)beams on the elastic *** different functionally graded(FG)layouts and a uniform one are the considered distributions for unidirectional long bamboo fibers across the *** elastic properties of the composite are determined with the law of *** Hamilton’s principle,the governing equations of motion are *** generalized differential quadrature method(GDQM)is then applied to the equations to obtain the *** achieved outcomes exhibit that the natural frequency and buckling load values vary as the fiber volume fractions and distributions,elastic foundation stiffness values,and boundary conditions(BCs)and slenderness ratio of the beam ***,a comparative study is conducted between the derived analysis outcomes for BFRC and homogenous polymer beams to examine the effectiveness of bamboo fibers as reinforcement materials,demonstrating the significant enhancements in both vibration and buckling responses,with the exception of natural frequencies for cantilever beams on the Pasternak foundation with the FG-◇fiber ***,the obtained analysis results of BFRC beams are also compared with those for carbon nanotube reinforced composite(CNTRC)beams found in the literature,indicating that the buckling loads and natural frequencies of BFRC beams are lower than those of CNTRC beams.

关键词： bamboo fiber free vibration buckling analysis functionally graded(FG)beam elastic foundation generalized differential quadrature method(GDQM)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Dynamic and electrical responses of a curved sandwich beam with glass reinforced laminate layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact

引用

Applied Mathematics and Mechanics(English Edition) 2024年第1期45卷 155-178页

作者： N.SHAHVEISI S.FELI department of mechanical engineering Razi UniversityKermanshah ***Iran

The dynamic responses and generated voltage in a curved sandwich beam with glass reinforced laminate(GRL)layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact(LVI)are *** current study aims to carry out a dynamic analysis on the sandwich beam when the impactor hits the top face sheet with an initial *** the layer analysis,the high-order shear deformation theory(HSDT)and Frostig's second model for the displacement fields of the core layer are *** classical non-adhesive elastic contact theory and Hunter's principle are used to calculate the dynamic responses in terms of *** order to validate the analytical method,the outcomes of the current investigation are compared with those gained by the experimental tests carried out by other researchers for a rectangular composite plate subject to the *** element(FE)simulations are conducted by means of the ABAQUS *** effects of the parameters such as foam modulus,layer material,fiber angle,impactor mass,and its velocity on the generated voltage are reviewed.

关键词： analytical model piezoelectric layer curved sandwich beam glass reinforced laminate(GRL) pliable core low-velocity impact(LVI) classical non-adhesive elastic contact theory

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research on the flow stability and noise reduction characteristics of quasi-periodic elastic support skin

引用

Defence Technology（防务技术） 2024年第3期33卷 222-236页

作者： Lu Chen Shao-gang Liu Dan Zhao Li-qiang Dong Kai Li Shuai Tang Jin Cui Hong Guo department of mechanical and Electrical engineering Harbin Engineering UniversityHarbin150001China

To enhance flow stability and reduce hydrodynamic noise caused by fluctuating pressure,a quasiperiodic elastic support skin composed of flexible walls and elastic support elements is proposed for fluid noise *** arrangement of the elastic support element is determined by the equivalent periodic distance and quasi-periodic *** this paper,a dynamic model of skin in a fluid environment is *** influence of equivalent periodic distance and quasi-periodic coefficient on flow stability is *** results suggest that arranging the elastic support elements in accordance with the quasi-periodic law can effectively enhance flow ***,the hydrodynamic noise calculation results demonstrate that the skin exhibits excellent noise reduction performance,with reductions of 10 dB in the streamwise direction,11 dB in the spanwise direction,and 10 dB in the normal *** results also demonstrate that the stability analysis method can serve as a diagnostic tool for flow fields and guide the design of noise reduction structures.

关键词： Flow stability Quasi-period Flexible wall Elastic support element Hydrodynamic noise

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Kinematics ofmandibular advancement devices(MADs):Why do some MADs move the lower jaw backward duringmouth opening?

引用

Bio-Design and Manufacturing 2024年第5期7卷 637-650页

作者： Juan A.Cabrera Alex Bataller Sergio Postigo Marcos García mechanical engineering department University of Malaga29071 MalagaSpain

Mandibular advancement devices(MADs)are widely used treatments for obstructive sleep *** function by advancing the lower jaw to open the upper *** increase patient comfort,most patients allow the mouth to be ***,not all systems maintain the lower jaw in a forward position during mouth opening,which results in the production of a retrusion that favors the collapse of the upper ***,the kinematic behavior of the mechanism formed by the mandible-device assembly depends on jaw *** means that,during mouth opening,some devices cause lower jaw protrusion in some patients,but cause its retraction in *** this study,we report the behavior of well-known devices currently on *** do so,we developed a kinematic model of the lower jawdevice *** validated for all devices analyzed using a high-resolution camera *** results show that some of the devices analyzed here did not produce the correct behavior during patient mouth opening.

关键词： Mandibular advancement devices Lower jaw kinematics Sleep apnea

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Control and vibration analyses of a sandwich doubly curved micro-composite shell with honeycomb, truss, and corrugated cores based on the fourth-order shear deformation theory

引用

Applied Mathematics and Mechanics(English Edition) 2024年第10期45卷 1773-1790页

作者： F.SHIRDELAN M.MOHAMMADIMEHR F.BARGOZINI department of Solid Mechanics Faculty of Mechanical Engineering University of Kashan

Curved shells are increasingly utilized in applied engineering due to their shared characteristics with other sandwich structures, flexibility, and attractive appearance. However, the inability of controlling and regulating vibrations and destroying them afterward is a challenge to scientists. In this paper, the curve shell equations and a linear quadratic regulator are adopted for the state feedback design to manage the structure vibrations in state space forms. A five-layer sandwich doubly curved micro-composite shell, comprising two piezoelectric layers for the sensor and actuator, is modeled by the fourth-order shear deformation theory. The core(honeycomb, truss, and corrugated) is analyzed for the bearing of transverse shear forces. The results show that the honeycomb core has a greater effect on the vibrations. When the parameters related to the core and the weight percentage of graphene increase, the frequency increases. The uniform distribution of graphene platelets results in the lowest natural frequency while the natural frequency increases. Furthermore, without taking into account the piezoelectric layers,the third-order shear deformation theory(TSDT) and fourth-order shear deformation theory(FOSDT) align closely. However, when the piezoelectric layers are incorporated,these two theories diverge significantly, with the frequencies in the FOSDT being lower than those in the TSDT.

关键词： 74F15 corrugate core doubly curved shell honeycomb micro-composite O343 truss vibration and control

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A thermodynamic perspective on electrode poisoning in solid oxide fuel cells

引用

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1449-1455页

作者： Kevin Huang department of mechanical engineering University of South CarolinaColumbiaUSA

A critical challenge to the commercialization of clean and high-efficiency solid oxide fuel cell(SOFC)technology is the insuf-ficient stack lifespan caused by a variety of degradation mechanisms,which are associated with cell components and chemical *** components related degradation refers to thermal/chemical/electrochemical deterioration of cell materials under operating conditions,whereas the latter regards impurities in feedstocks of oxidant(air)and reductant(fuel).This article provides a thermodynamic perspective on the understanding of the impurities-induced degradation mechanisms in *** discussion focuses on using thermodynamic ana-lysis to elucidate poisoning mechanisms in cathodes by impurity species such as Cr,CO_(2),H_(2)O,and SO_(2) and in the anode by species such as S(or H_(2)S),SiO_(2),and P_(2)(or PH_(3)).The author hopes the presented fundamental insights can provide a theoretical foundation for search-ing for better technical solutions to address the critical degradation challenges.

关键词： impurities air fuel reaction activity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：