检索结果-南通市图书馆

Ionic liquid-assisted preparation of hydroxyapatite and its catalytic performance for decarboxylation of itaconic acid

引用

Chinese Journal of Chemical engineering 2024年第3期67卷 9-15页

作者： Shutong Pang Hualiang An Xinqiang Zhao Yanji Wang Hebei Provincial Key laboratory of Green Chemical technology and Efficient energy saving Tianjin Key Laboratory of Chemical Process SafetySchool of Chemical Engineering and TechnologyHebei University of TechnologyTianjin 300130China

The synthesis of methacrylic acid from biomass-derived itaconic acid is a green route,for it can get rid of the dependence on fossil *** order to solve the problems on this route such as use of a preciousmetal catalyst and a corrosive homogeneous alkali,we prepared a series of hydroxyapatite catalysts by an ionic liquid-assisted hydrothermal method and evaluated their catalytic *** results showed that the ionic liquid[Bmim]BF_(4) can affect the crystal growth of hydroxyapatite,provide fluoride ion for fluorination of hydroxyapatite,and adjust the surface acidity and basicity,morphology,textural properties,crystallinity,and composition of ***[Bmim]BF4 dosage and hydrothermal temperature can affect the fluoride ion concentration in the hydrothermal system,thus changing the degree of fluoridation of *** fluoride-ion concentration can lead to the formation of CaF_(2) and thus significantly decrease the catalytic performance of *** hydrothermal time mainly affects the growth of hydroxyapatite crystals on the c axis,leading to different catalytic *** suitable conditions for the preparation of this fluoridized hydroxyapatite are as follows:a mass ratio of[Bmim]BF4 to calcium salt=0.2:1,a hydrothermal time of 12 h,and a hydrothermal temperature of 130℃.A maximal methacrylic acid yield of 54.7%was obtained using the fluoridized hydroxyapatite under relatively mild reaction conditions(250℃ and 2 MPa of N_(2))in the absence of a precious-metal catalyst and a corrosive homogeneous alkali.

关键词： Ionic liquid Hydroxyapatite Itaconic acid Methacrylic Decarboxylation reaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Intrinsic correlation between the generalized phase equilibrium condition and mechanical behaviors in hydrate-bearing sediments

引用

Journal of Rock Mechanics and Geotechnical engineering 2024年第7期16卷 2822-2832页

作者： Jiazuo Zhou Changfu Wei Rongtao Yan Yuan Zhou Yi Dong Hubei Key laboratory of Marine Geological Resources College of Marine Science and TechnologyChina University of GeosciencesWuhanChina State Key laboratory of Geomechanics and Geotechnical engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhanChina Guangxi Key laboratory of New energy and building energy saving College of Civil Engineering and ArchitectureGuilin University of TechnologyGuilinChina

The phase equilibrium and mechanical behaviors of natural gas hydrate-bearing sediment are essential for gas recovery from hydrate *** heating closed systems,the temperature-pressure path of hydrate-bearing sediment deviates from that of pure bulk hydrate,reflecting the porous media effect in phase equilibrium.A generalized phase equilibrium equation was established for hydrate-bearing sediments,which indicates that both capillary and osmotic pressures cause the phase equilibrium curve to shift leftward on the temperature-pressure *** contrast to bulk hydrate,hydrate-bearing sediment always contains a certain amount of unhydrated water,which keeps phase equilibrium with the hydrate within the hydrate stability *** changes in temperature and pressure,a portion of pore hydrate and unhydrated water may transform into each other,affecting the shear strength of hydrate-bearing sediment.A shear strength model is proposed to consider not only hydrate saturation but also the change in temperature and pressure of hydrate-bearing *** model is validated by experimental data with various hydrate saturation,temperature and pressure *** deformation induced by partial dissociation was studied through depressurization tests under constant effective *** reduction in gas pressure within the hydrate stability field indeed caused sediment *** dissociation-induced deformation can be reasonably estimated as the difference in volume between hydrate-bearing and hydrate-free sediments from the compression curves.

关键词： Hydrate-bearing sediment Generalized phase equilibrium Unhydrated water Partial dissociation Mechanical behavior

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Improved length of calcium sulfate crystal seeds and whiskers via ball milling and hydration treatment

引用

Chinese Journal of Chemical engineering 2024年第7期71卷 102-109页

作者： Yuke Li Yuxin Liu Jizhen Huang Yi Mei Faculty of Chemical engineering Kunming University of Science and TechnologyKunming 650500China Yunnan Provincial Key laboratory of energy saving in Phosphorus Chemical engineering and New Phosphorus Materials Kunming University of Science and TechnologyKunming 650500China

Elucidating the effect of growth periods on the quality of calcium sulfate whiskers(CSWs)prepared from calcium sulfate dihydrate(DH)is ***,crystal seeds and whiskers were prepared from DH in a water–glycerol *** whiskers were obtained from crystal seeds prepared via hydration of DH for 30 s than via ball milling for 5 min followed by hydration for 20 *** attachment of cetyltrimethyl ammonium bromide and glycerol additives to the whisker tops promoted whisker *** whisker sponges exhibited good thermal barrier properties and compression cycle stability.

关键词： Hemihydrate gypsum whisker Hydration Ball milling/hydration Crystal seed Growth process

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Enhanced stability of nitrogen-doped carbon-supported palladium catalyst for oxidative carbonylation of phenol

引用

Chinese Journal of Chemical engineering 2024年第1期65卷 19-28页

作者： Xiaojing Liu Ruohan Zhao Hao Zhao Zhimiao Wang Fang Li Wei Xue Yanji Wang Hebei Provincial Key laboratory of Green Chemical technology and High Efficient energy saving School of Chemical Engineering and TechnologyHebei University of TechnologyTianjin 300130China Tianjin Key laboratory of Chemical Process Safety Tianjin 300130China Hebei Industrial technology Research Institute of Green Chemical Industry Huanghua 061100China

Enhancing the stability of supported noble metal catalysts emerges is a major challenge in both science and ***,a heterogeneous Pd catalyst(Pd/NCF)was prepared by supporting Pd ultrafine metal nanoparticles(NPs)on nitrogen-doped carbon;synthesized by using F127 as a stabilizer,as well as chitosan as a carbon and nitrogen *** Pd/NCF catalyst was efficient and recyclable for oxidative carbonylation of phenol to diphenyl carbonate,exhibiting higher stability than Pd/NC prepared without F127 *** hydrogen bond between chitosan(CTS)and F127 was enhanced by F127,which anchored the N in the free amino group,increasing the N content of the carbon material and ensuring that the support could provide sufficient N sites for the deposition of Pd *** process helped to improve metal *** increased metal-support interaction,which limits the leaching and coarsening of Pd NPs,improves the stability of the Pd/NCF ***,density functional theory calculations indicated that pyridine N stabilized the Pd^(2+)species,significantly inhibiting the loss of Pd^(2+)in Pd/NCF during the reaction *** work provides a promising avenue towards enhancing the stability of nitrogen-doped carbon-supported metal catalysts.

关键词： Supported Pd catalyst N-doped carbon Amphiphilic triblock copolymer Pyridinic nitrogen Stability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preparation of Manganese Oxide and Its Adsorption Properties

引用

Journal of Wuhan University of technology(Materials Science) 2024年第4期39卷 1031-1040页

作者：贺跃王海峰 YANG Pan WANG Song CHEN Xiaoliang YANG Chunyuan 王家伟 School of Materials and Metallurgy Guizhou UniversityGuiyang 550025China Guizhou Provincial engineering technology Research Center of Manganese Materials for Batteries Tongren Guizhou 554300China Guizhou Provincial Key laboratory of Metallurgical engineering and energy saving Guiyang 550025China

The in-situ oxidation of manganese sulfate solution with H2O_(2),sodium hypochlorite,potassium permanganate and oxygen as oxidants was investigated by means of SEM,EDS,XRD,BET and infrared analysis,and the effects of different oxidants on the morphology,phase composition,surface properties and specific surface area of manganese oxides were *** experimental results show that the diameter of manganese oxide particles prepared with H_(2)O_(2)is the smallest,about 50 nm,and the specific surface area is the largest,63.8764 m^(2)/*** has the advantages of abundant surface hydroxyl groups,no introduction of other impurities and large adsorption *** is most suitable to be used as an oxidant for oxidizing manganese sulfate solution to prepare manganese oxide by in-situ *** manganese oxide prepard by H_(2)O_(2)in-situ oxidation method is used as adsorbent to adsorb cobalt and nickel impurities in manganese *** the reaction pH is 6,the reaction time is 30min and the amount of adsorbent is 1.0 g,the adsorption rates of cobalt and nickel impurities in 100ml manganese sulfate solution are 97.59%and 97.67%,*** residual amounts of cobalt and nickel meet the industrial process standard of first-class products(Co,Ni w/%≤0.005)of high-purity manganese sulfate(Hg/t4823-2015)for *** study plays a guiding role in the preparation and regulation of manganese oxide,and provides a new method with high efficiency,purity and adsorbent availability for the preparation of high-purity manganese sulfate solution.

关键词： manganese oxide in situ oxidation adsorbent regulation mechanism physical chemical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An improved transfer learning strategy for short-term cross-building energy prediction usingdata incremental

引用

building Simulation 2024年第1期17卷 165-183页

作者： Guannan Li Yubei Wu Chengchu Yan Xi Fang Tao Li Jiajia Gao Chengliang Xu Zixi Wang School of Urban Construction Wuhan University of Science and TechnologyWuhan 430065China Anhui Province Key laboratory of Intelligent building and building energy-saving Anhui Jianzhu UniversityHefei 230601China State Key laboratory of Green building in Western China Xi'an University of Architecture and TechnologyXi'an 710055China College of Urban Construction Nanjing Tech UniversityNo.200North Zhongshan RoadNanjing 210009China Key laboratory of Low-grade energy Utilization Technologies and Systems(Chongqing University) Ministry of Education of ChinaChongqing UniversityChongqing 400044China College of Civil engineering Hunan UniversityChangsha 410082China Hubei Provincial engineering Research Center of Urban Regeneration Wuhan University of Science and TechnologyWuhan 430065China

The available modelling data shortage issue makes it difficult to guarantee the performance of data-driven building energy prediction(BEP)models for both the newly built buildings and existing information-poor *** knowledge transfer learning(KTL)and data incremental learning(DIL)can address the data shortage issue of such *** new building scenarios with continuous data accumulation,the performance of BEP models has not been fully investigated considering the data accumulation ***,which can learn dynamic features from accumulated data adapting to the developing trend of new building time-series data and extend BEP model's knowledge,has been rarely *** studies have shown that the performance of KTL models trained with fixed data can be further improved in scenarios with dynamically changing ***,this study proposes an improved transfer learning cross-BEP strategy continuously updated using the coarse data incremental(CDI)*** hybrid KTL-DIL strategy(LSTM-DANN-CDI)uses domain adversarial neural network(DANN)for KLT and long short-term memory(LSTM)as the Baseline BEP *** evaluation is conducted to systematically qualify the effectiveness and applicability of KTL and improved ***-world data from six-type 36 buildings of six types are adopted to evaluate the performance of KTL and KTL-DIL in data-driven BEP tasks considering factors like the model increment time interval,the available target and source building data *** with LSTM,results indicate that KTL(LSTM-DANN)and the proposed KTL-DIL(LSTM-DANN-CDI)can significantly improve the BEP performance for new buildings with limited *** with the pure KTL strategy LSTM-DANN,the improved KTL-DIL strategy LSTM-DANN-CDI has better prediction performance with an average performance improvement ratio of 60%.

关键词： building energy prediction(BEP) cross-building data incremental learning(DIL) domain adversarial neural network(DANN) knowledge transfer learning(KTL)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Simulation of gas-solid flow characteristics of the circulating fluidized bed boiler under pure-oxygen combustion conditions

引用

Chinese Journal of Chemical engineering 2024年第6期70卷 9-19页

作者： Kaixuan Gao Xiwei Ke Bingjun Du Zhenchuan Wang Yan Jin Zhong Huang Yanhong Li Xuemin Liu Key laboratory of Special Equipment Safety and energy-saving for State Market Regulation China Special Equipment Inspection&Research InstituteBeijing 100029China Department of energy and Power engineering Tsinghua UniversityBeijing 100084China School of Electrical and Power engineering Taiyuan University of TechnologyTaiyuan 030024China

Under the pressure of carbon neutrality,many carbon capture,utilization and storage technologies have witnessed rapid development in the recent years,including oxy-fuel combustion(OFC)***,the conventional OFC technology usually depends on the flue gas recirculation system,which faces significant investment,high energy consumption,and potential low-temperature corrosion *** these deficiencies,the direct utilization of pure oxygen to achieve particle fluidization and fuel combustion may reduce the overall energy consumption and CO_(2)-capture *** this paper,the fundamental structure of a self-designed 130 t·h^(-1) pure-oxygen combustion circulating fluidized bed(CFB)boiler was provided,and the computational particle fluid dynamics method was used to analyze the gas-solid flow characteristics of this new-concept boiler under different working *** results indicate that through the careful selection of design or operational parameters,such as average bed-material size and fluidization velocity,the pure-oxygen combustion CFB system can maintain the ideal fluidization state,namely significant internal and external particle ***,the contraction section of the boiler leads to the particle backflow in the lower furnace,resulting in the particle suspension concentration near the wall region being higher than that in the center ***,the upper furnace still retains the classic core-annulus flow *** addition to increasing solid circulation rate by reducing the average bed-material size,altering primary gas ratio and bed inventory can also exert varying degrees of influence on the gas-solid flow characteristics of the pure-oxygen combustion CFB boiler.

关键词： Circulating fluidized bed Pure-oxygen combustion Gas-solid flow characteristics Simulation CO_(2)capture

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Simultaneous removal of sulfur dioxide and nitrogen oxide from flue gas by phosphorus sludge:The performance and absorption mechanism

引用

Chinese Journal of Chemical engineering 2024年第1期65卷 212-221页

作者： Yuanyuan Yin Xujun Wang Lei Xu Binbin He Yunxiang Nie Yi Mei Faculty of Chemical engineering Kunming University of Science and TechnologyKunming 650500China Yunnan Provincial Key laboratory of energy saving in Phosphorus Chemical engineering and New Phosphorus Materials Kunming 650500China The Higher Educational Key laboratory for Phosphorus Chemical engineering of Yunnan Province Kunming 650500China

Developing low-cost and green simultaneous desulfurization and denitrification technologies is of great significance for sulfur dioxide(SO_(2))and nitrogen oxide(NO_(x))emission control at low temperatures,especially for small and medium-sized coal-fired boilers and ***,phosphorus sludge,an industrial waste from the production process of yellow phosphorus,has been developed to simultaneously eliminate SO_(2)and NO_(x)from coal-fired flue *** key factors affecting the experimental results indicate that desulfurization and denitrification efficiency of over 95%can be achieved at a low temperature of 55℃.Further,the absorption mechanism was investigated by characterizing the solid and liquid phases of the phosphorus sludge during the absorption *** efficient removal of SO_(2)is attributed to the abundance of iron(Fe^(3+))and manganese(Mn^(2+))in the ***_(2)can be rapidly catalyzed and converted to SO_(4)^(2-)by *** key to NOx removal is the oxidation of NO toward watersoluble high-valent nitrogen oxides by oxidizing reactive substances induced via yellow phosphorus,which are then absorbed by water and converted to NO_(3)^(-).Meanwhile,yellow phosphorus is oxidized to phosphoric acid(H_(3)PO_(4)).The spent absorption slurry can be reused through wet process phosphoric acid production,as it contains sulfuric acid(H_(2)SO_(4)),nitric acid(HNO_(3)),and H_(3)PO_(4).Accordingly,this is a technology with broad application prospects.

关键词： Absorption Oxidation Multiphase reaction Phosphorus sludge Yellow phosphorus Low temperature

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Towards advanced zinc anodes by interfacial modification strategies for efficient aqueous zinc metal batteries

引用

Journal of energy Chemistry 2024年第6期93卷 79-110,I0003页

作者： Changchun Fan Weijia Meng Jiaye Ye Key laboratory of Bio-Inspired Smart Interfacial Science and technology Ministry of EducationSchool of ChemistryBeihang UniversityBeijing 100191China Shaanxi Key laboratory of New Transportation energy and Automotive energy saving School of Energy and Electrical EngineeringChang’an UniversityXi’an 710061ShaanxiChina School of Chemistry and Physics Faculty of ScienceQueensland University of TechnologyBrisbaneQLD 4001Australia Centre for Materials Science Queensland University of TechnologyBrisbaneQLD 4001Australia

Developing sustainable and clean energy sources(e.g.,solar,wind,and tide energy)is essential to achieve the goal of carbon *** to the discontinuous and inco nsistent nature of common clean energy sources,high-performance energy storage technologies are a critical part of achieving this *** zinc metal batteries(AZMBs)with inherent safety,low cost,and competitive performance are regarded as one of the promising candidates for grid-scale energy ***,zinc metal anodes(ZMAs)with irreversible problems of dendrite growth,hydrogen evolution reaction,self-corrosio n,and other side reactions have seriously hindered the development and commercialization of *** increasing number of researchers are focusing on the stability of ZMAs,so assessing the effectiveness of existing research strategies is critical to the development of *** review aims to provide a comprehensive overview of the fundamentals and challenges of *** rch strategies for interfacial modification of ZMAs are systematically *** features of artificial interfacial coating and in-situ interfacial coating of ZMAs are compared and discussed in detail,as well as the effect of modified interfacial ZMA on the full-battery ***,perspectives are provided on the problems and challenges of *** review is expected to offer a constructive reference for the further development and commercialization of AZMBs.

关键词： Aqueous zinc metal batteries Zinc metal anode Interfacial modification Artificial interfacial coating In-situ interfacial coating

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Computational fluid dynamics modeling of rapid pyrolysis of solid waste magnesium nitrate hydrate under different injection methods

引用

Chinese Journal of Chemical engineering 2024年第2期66卷 224-237页

作者： Wenchang Wu Kefan Yu Liang Zhao Hui Dong SEP Key laboratory of Eco-industry School of MetallurgyNortheastern UniversityShenyang 110819China Liaoning engineering Research Center of energy saving and Green Low Carbon technology for Process Industry Northeastern UniversityShenyang 110819China

This study developed a numerical model to efficiently treat solid waste magnesium nitrate hydrate through multi-step chemical *** model simulates two-phase flow,heat,and mass transfer processes in a pyrolysis furnace to improve the decomposition rate of magnesium *** performance of multi-nozzle and single-nozzle injection methods was evaluated,and the effects of primary and secondary nozzle flow ratios,velocity ratios,and secondary nozzle inclination angles on the decomposition rate were *** indicate that multi-nozzle injection has a higher conversion efficiency and decomposition rate than single-nozzle injection,with a 10.3%higher conversion rate under the design *** decomposition rate is primarily dependent on the average residence time of particles,which can be increased by decreasing flow rate and velocity ratios and increasing the inclination angle of secondary *** optimal parameters are injection flow ratio of 40%,injection velocity ratio of 0.6,and secondary nozzle inclination of 30°,corresponding to a maximum decomposition rate of 99.33%.

关键词： Multi-nozzle Computational fluid dynamics Thermal decomposition reaction Pyrolysis furnace

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：