检索结果-南通市图书馆

Low-cost and fluoride-free synthesis of MFI zeolite nanosheets with enhanced stability for benzene alkylation with ethanol

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy chemistry 2025年第1期100卷 458-468页

作者： Peng Zhu Cun Liu Yiren Yu Guoshu Gao Yumeng Zhao Xiongfu Zhang Guodong Liu Guohui Yang State key laboratory of Fine Chemicals School of Chemical Engineering Dalian University of Technology State key laboratory of Catalysis Dalian Institute of Chemical Physics Chinese Academy of Sciences

Zeolite nanosheets with a short b-axis thickness are highly desirable in lots of catalytic reactions due to their reduced diffusion resistance. Nevertheless, conventional synthesis methods usually require expensive structure-directing agents(SDAs), pricey raw materials, and eco-unfriendly fluorine-containing additives. Here, we contributed a cost-effective and fluoride-free synthesis method for synthesizing high-quality MFI zeolite nanosheets through a Silicalite-1(Sil-1) seed suspension and urea cooperative strategy, only with inexpensive colloidal silica as the Si source. Our approach was effective for synthesizing both Sil-1 and aluminum-containing ZSM-5 nanosheets. By optimizing key synthesis parameters,including seed aging time, seed quantity, and urea concentration, we achieved precise control over the crystal face aspect ratio and b-axis thickness. We also revealed a non-classical oriented nanosheet growth mechanism, where Sil-1 seeds induced the formation of quasi-ordered precursor particles, and the(010)crystal planes of these particles facilitated urea adsorption, thereby promoting c-axis-oriented *** obtained ZSM-5 nanosheets exhibited exceptional catalytic performance in the benzene alkylation with ethanol, maintaining stability for over 500 h, which is 5 times longer than traditional ZSM-5 catalysts. Furthermore, large-scale production of ZSM-5 nanosheets was successfully carried out in a 3 L highpressure autoclave, yielding samples consistent with those from laboratory-scale synthesis. This work marks a significant step forward in the sustainable and efficient production of MFI nanosheets using inexpensive and environmentally friendly raw materials, offering the broad applicability in catalysis.

关键词： MFI zeolite ZSM-5 Nanosheets Scale-up synthesis Aromatic alkylation

Bifunctional bridging capping layer enables 24.5% efficiency of perovskite solar cells with polymer-based hole transport materials

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China chemistry 2025年第1期 350-359页

作者： Can Zhu Yiyang Wang Lei Meng Beibei Qiu Jing Li Shucheng Qin Ke Hu Xin Jiang Wenbin Lai Minchao Liu Zhe Liu Chenxing Lu Jinyuan Zhang Yongfang Li Beijing National laboratory for Molecular Sciences CAS Key Laboratory of Organic Solids Institute of Chemistry Chinese Academy of Sciences School of Chemical Science University of Chinese Academy of Sciences key laboratory of Solid State Optoelectronic Devices of Zhejiang Province College of Physics and Electronic Information Engineering Zhejiang Normal University key laboratory of Photochemical Conversion and Optoelectronic Materials Technical Institute of Physics and ChemistryChinese Academy of Sciences laboratory of Advanced Optoelectronic Materials College of Chemistry Chemical Engineering and Materials ScienceSoochow University

Developing a bridge capping layer between perovskite and hole transport layer materials（HTMs） in the n-i-p perovskite solar cells（pero-SCs） is an effective approach to modify the morphology of HTMs and passivate the perovskite ***, we select the quinoxaline-based bifunctional passivation agent, quinoxalin-6-yl-methylamine hydrochloride（Qx MACl）,as the bridging layer, and a D-A copolymer PBQ12 containing the same quinoxaline unit as an HTM for the n-i-p pero-SCs. Due to the π-π stacking among the common quinoxaline units in the bridge layer and HTM, Qx MACl induces the π-π stacking of the PBQ12 film and improves the film morphology of HTMs with better conductivity. Additionally, Qx MACl can effectively passivate the perovskite surface, and PBQ12 possesses appropriate energy levels and high hole mobility. The pero-SCs based on FAPbI3with PBQ12/Qx MACl treatment showed a higher power conversion efficiency（PCE） of 24.05% and outstanding stability, maintaining 95.4% and 92.1% of its initial PCE after 750 h of storage and after over 800 h of thermal annealing at 85 °C, respectively. To further enhance the PCE of the PBQ12/Qx MACl-based devices, we developed a non-metal ion dopant for the PBQ12 HTM. Through trace doping of PBQ12 HTM by the non-metal ion dopant, the PCE of the PBQ12/Qx MACl-based devices reached 25.24%（the calibrated PCE of 24.55% by the National Institute of Metrology, China）.

关键词：

A surface engineering strategy for the stabilization of zinc metal anodes with montmorillonite layers toward long-life rechargeable aqueous zinc ion batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy chemistry 2025年第1期100卷 94-105页

作者： Wenbo Wang Ruifeng Xu Xu Zhang Peiyu Wang Bao Yang Bingjun Yang Juan Yang Kailimai Su Pengjun Ma Yanan Deng Xianfeng Fan Wanjun Chen key laboratory for Electronic Materials College of Electrical Engineering Northwest Minzu University Resource chemistry and Energy Materials Research Center State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical Physics Chinese Academy of Sciences University of Chinese Academy of Sciences Institute for Materials and Processes School of Engineering University of Edinburgh

Rechargeable aqueous zinc-ion batteries （AZIBs） exhibit appreciable potential in the domain of electrochemical energy ***,there are serious challenges for AZIBs,for instance zinc dendrite growth,hydrogen evolution reaction （HER）,and corrosion side ***,we propose a surface engineering modification strategy for coating the montmorillonite （MMT） layer onto the surface of the Zn anode to tackle these issues,thereby achieving high cycling stability for rechargeable *** results reveal that the MMT layer on the surface of the Zn anode is able to provide ordered zincophilic channels for zinc ions migration,facilitating the reaction kinetics of zinc *** functional theory（DFT） calculations and water contact angle （CA） tests prove that MMT@Zn anode exhibits superior adsorption capacity for Zn2+and better hydrophobicity than the bare Zn anode,thereby achieving excellent cycling ***,the MMT@Zn||MMT@Zn symmetric cell holds the stable cycling over 5600 h at 0.5 mA cm-2and 0.125 m A h cm-2,even exceeding 1800 h long cycling under harsh conditions of 5 m A cm-2and 1.25 m A h *** MMT@Zn||V2O5full cell reaches over 3000 cycles at 2 A g-1with excellent rate ***,this surface engineering modification strategy for enhancing the electrochemical performance of AZIBs represents a promising application.

关键词： Surface engineering strategy Montmorillonite layer Protection mechanism of Zn anode Cycling stability Aqueous zinc ion batteries

Visible-light-responsive homologous heterostructure of oxynitrides constructed to boost charge separation and water splitting

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China chemistry 2025年第01期 186-191页

作者： Hai Zou Yunfeng Bao Xueshang Xin Yu Qi Tengfeng Xie Fuxiang Zhang State key laboratory of Catalysis Dalian National Laboratory for Clean Energy Dalian Institute of Chemical Physics Chinese Academy of Sciences School of chemistry and Chemical Engineering Liaoning Normal University College of chemistry Jilin University

Constructing type II heterostructures represents a widely recognized strategy for enhancing charge separation and photocatalytic efficiency,but it remains challenging to fabricate homologous heterostructures based on visible-light-responsive semiconductors,especially for popularly investigated （oxy）nitrides with low thermal ***,we synthesized a homologous heterostructure （denoted as YTON＿H） based on the oxynitrides of YTaO4-xNyand YTa *** heterostructure exhibits type II band structure alignment and intimate interface achieved through a magnesium （Mg） powder-assisted nitridation *** with widely reported heterologous heterostructures,the as-obtained YTON＿H homologous heterostructure could similarly exhibit enhanced charge separation as well as photocatalytic water splitting performance with respect to its counterparts(YTaO4-xNyand YTaON2).Meanwhile,detailed structural characterizations and spectroscopy analysis have been made to confirm the formation of heterostructure and promotion of spatial charge separation.

关键词：

Enantio-divergent C–H borylation with two different ligands from a single chiral source

在线全文

学校读者我要写书评

暂无评论

Science China chemistry 2025年第1期 226-232页

作者： Rongrong Du Senmiao Xu State key laboratory for Oxo Synthesis and Selective Oxidation Lanzhou Institute of Chemical Physics Chinese Academy of Sciences College of Material chemistry and Chemical Engineering Key Laboratory of Organosilicon Chemistry and Material TechnologyMinistry of Education Hangzhou Normal University University of Chinese Academy of Sciences

Reported here is an iridium-catalyzed enantio-divergent C（sp3）–H borylation of α-gem-dimethyl groups of trifluoromethyl ketone-derived hydrazones to construct a series of acyclic all-carbon quaternary stereocenters with a high level of chiral induction. Two different chiral bidentate boryl ligands from a common chiral source not only can switch the enantioselectivity but also are complementary in terms of the substrate scope.

关键词：

Electrochemical conversion of methane to bridge the gap in the artificial carbon cycle

在线全文

学校读者我要写书评

暂无评论

Journal of Energy chemistry 2025年第1期100卷 286-308页

作者： Yuhao Peng Yuefeng Song Ihar Razanau Juanxiu Xiao Wei Xiao Di Hu Guoxiong Wang College of chemistry and Molecular Sciences Hubei Key Laboratory of Electrochemical Power Sources Wuhan University State key laboratory of Catalysis Dalian National Laboratory for Clean Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Dalian Institute of Chemical Physics Chinese Academy of Sciences laboratory of Physical-Chemical Technologies SSPA Scientific and Practical Materials Research Centre of NAS of Belarus State key laboratory of Marine Resources Utilization in South China Sea Collaborative Innovation Center of Marine Science and Technology School of Marine Science and Engineering Hainan University Department of Chemical and Environmental Engineering University of Nottingham Ningbo China

Methane, an abundant one-carbon（C1） resource, is extensively used in the industrial production of vital fuels and value-added chemicals. However, current industrial methane conversion technologies are energy-and carbon-intensive, mainly due to the high activation energy required to break the inert C–H bond, low selectivity, and problematic side reactions, including CO2emissions and coke deposition. Electrochemical conversion of methane（ECM） using intermittent renewable energy offers an attractive solution, due to its modular reactor design and operational flexibility across a broad spectrum of temperatures and pressures. This review emphasizes conversion pathways of methane in various reaction systems, highlighting the significance and advantages of ECM in facilitating a sustainable artificial carbon cycle. This work provides a comprehensive overview of conventional methane activation mechanisms and delineates the complete pathways of methane conversion in electrolysis contexts. Based on surface/interface chemistry, this work systematically analyzes proposed reaction pathways and corresponding strategies to enhance ECM efficiency towards various target products, including syngas, hydrocarbons, oxygenates, and advanced carbon materials. The discussion also encompasses opportunities and challenges for the ECM process, including insights into ECM pathways, rational electrocatalyst design, establishment of benchmarking protocols, electrolyte engineering, enhancement of CH4conversion rates, and minimization of CO2emission.

关键词： Methane Electrochemical conversion Reaction mechanism Catalyst design Electrode Electrocatalysis

Recent progress on photoactive nonprecious transition-metal complexes

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China chemistry 2025年第1期 46-95页

作者： Zhong-Liang Gong Hong-Jie Zhang Yan Cheng Jianxun Liu Yuhan Ai Yaqin Li Zhihui Feng Qiong Zhang Shaolong Gong Yong Chen Chang-Jiang Yao Yuan-Yuan Zhu Liang-Jin Xu Yu-Wu Zhong CAS key laboratory of Photochemistry Institute of Chemistry Chinese Academy of Sciences State key laboratory of Structural Cemistry Fujian Institute of Research on the Structure of Matter Chinese Academy of Sciences School of chemistry and Chemical Engineering Anhui Key Laboratory of Advanced Catalytic Materials and Reaction EngineeringHefei University of Technology State key laboratory of Explosion Science and Safety Protection School of Mechatronical Engineering Beijing Institute of Technology College of chemistry and Molecular Sciences Hubei Key Lab on Organic and Polymeric Optoelectronic Materials Wuhan University School of chemistry and Chemical Engineering Anhui University key laboratory of Photochemical Conversion and Optoelectronic Materials & CAS-HKU Joint laboratory on New Materials Technical Institute of Physics and Chemistry Chinese Academy of Sciences

Photoactive complexes of nonprecious transition metals, mainly including those in the first-row and partially the second-row of the Periodic table of elements, have received increasing attention in view of their low cost and long-term sustainability. They are recognized as promising alternatives to noble transition metal complex congeners that have been extensively studied in optoelectronic devices, artificial photosynthesis, photocatalysis, biodiagnostics, and therapeutics, etc. This review is devoted to a comprehensive summary on the classical and recent advances on photoactive nonprecious transition metal complexes, including photoactive Zr, V, Cr, Mo, and W complexes, Mn complexes and hybrids, Fe, Co, Ni, and Cu complexes, and Zn and Cd complexes and hybrids. A particular focus is given on the molecular design, modulation of photophysical and photochemical properties, and applications of the representative and lately-developed nonprecious metal complexes. In addition, a perspective on the future development in this field is provided at the end of this review.

关键词：

Double [5]carbohelicene: facile synthesis, chiroptical properties,isomerization study, and lasing application

在线全文

学校读者我要写书评

暂无评论

Science China chemistry 2025年第1期 233-240页

作者： Peipei Liu Yantong Li Meng-Xiang Wu Hao Kang Xiao-Li Zhao Lin Xu Linlin Liu Xiaodong Li Junfeng Fang Zhiwei Fang Ya Cheng Hai-Bo Yang Huakang Yu Xueliang Shi State key laboratory of Petroleum Molecular & Process Engineering Shanghai Key Laboratory of Green Chemistry and Chemical ProcessesSchool of Chemistry and Molecular Engineering East China Normal University School of physics and Optoelectronics South China University of Technology Institute of Polymer Optoelectronic Materials & Devices State Key Laboratory of Luminescent Materials & Devices South China University of Technology School of physics and Electronic Science Engineering Research Center of Nanophotonics & Advanced Instrument Ministry of EducationEast China Normal University State key laboratory of Precision Spectroscopy School of Physics and Electronic Science East China Normal University

Double carbohelicenes have attracted considerable attention due to their aesthetic structures, distinct π-conjugation extension, inherent chirality, and intriguing optical and electronic properties. Herein, the concise de novo synthesis of a new double[5]carbohelicene 1 together with its chiroptical properties, isomerization process and lasing application is presented. 1 was synthesized by a simple protocol involving the formation of a 6,6′-bipentacene as the key intermediate. It is worth noting that1 existed as two diastereomers 1-PP/MM and 1-PM, which were successfully isolated and unambiguously confirmed by Xray crystallography. The optical resolution of the racemic 1-PP/MM was successfully achieved by chiral-phase highperformance liquid chromatography（HPLC）, and 1-PP and 1-MM were characterized by circular dichroism. Interestingly, it was found that 1-PP/MM could be completely isomerized to 1-PM upon heating, and the detailed thermodynamics and kinetics of the isomerization process were systematically investigated. 1-PM exhibited deep-red luminescence with emission maximum at 723 nm and fluorescence quantum yield as high as 32.95%. Consequently, we can showcase the lasing application of 1-PM by doping with epoxy resin to assemble a bottle microlaser spontaneously, which the lasing wavelength is 796.6 nm at a threshold of 0.8 m J cm-2. We believe that our studies, including the facile synthesis methodology, detailed isomerization studies, and lasing application, will shed some light on the design and synthesis of novel carbohelical systems with more functions.

关键词：

Observation of topological charge transformations in acoustic vortex using passive periodic systems

在线全文

学校读者我要写书评

暂无评论

Science China(physics,Mechanics & Astronomy) 2025年第1期Mechanics & Astronomy) .卷 140-147页

作者： Di-Chao Chen Xie Liu Changqing Xu Da-Jian Wu Ying Cheng Xiao-Jun Liu School of physics and Technology Nanjing Normal University key laboratory of Modern Acoustics School of Physics Nanjing University

Vortex transmutation utilizes a periodic system, which not only enables the alteration of the topological charge(TC) of unstable input vortices but also facilitates their transformation into stable structures. This approach is crucial for investigating the characteristics of vortices in various wave systems. Here, we achieve acoustic vortex TC transmutation by employing a welldesigned dual-structured plate external system(DPES). The interactions between the acoustic vortex and the finite-order discrete rotational symmetry lead to the transformation of its topological charge when complete rotational symmetry is broken to Nthorder discrete symmetry. Our results experimentally demonstrate the acoustic vortex TC transmutation based on passive artificial structures, enabling numerous applications in particle manipulation and information multiplexing as well as advancing our understanding and control over free-space acoustic vortices.

关键词： acoustic vortex topological charge transformation artificial structure