检索结果-南通市图书馆

Spontaneous anchoring Cl into α-Co（OH）2 as efficient and stable oxygen reduction electrocatalysts for seawater battery

引用

Rare Metals 2024年第7期43卷 3074-3083页

作者： Wang Zheng Xue-Rong Zheng Qi Lu Yan-Hui Cao Yang Wang Hai-Peng Fu Jin-Feng Zhang Yi-Da Deng Wen-Bin Hu School of materials Science and Engineering Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of EducationTianjin University State key laboratory of Marine Resource Utilization in South China Sea School of Materials Science and EngineeringHainan University key laboratory of electromagnetic processing of materials Ministry of EducationNortheastern University

Seawater battery is an advanced energy storage system that enables conversion of chemical energy to electricity by consuming metals,dissolved oxygen and seawater in anode,cathode and electrolyte,***,the oxygen reduction reaction（ORR） activity and stability of electrocatalysts can be easily deactivated due to the severe Cl-permeation and corrosion in seawater ***,we developed a structural buffer engineering strategy by spontaneously anchoring Cl-into α-Co（OH）2as efficient and stable ORR electrocatalysts,in which the ultrathin α-Co（OH）2nanosheets were synthesized using an ultrafast solution high-temperature shock（SHTS） *** large lattice space（～ 0.8 nm） of layered α-Co（OH）2ensured the spontaneously penetration of Cl-into the lattice structure and replaced part of OH-to form α-Co（OH）*** continuous leaching and compensating of saturated Cl in α-Co（OH）2-xClxcould enhance the Cl-corrosion resistance and modulate electronic structure of Co metallic sites,thus improving the ORR electrocatalytic activity and stability in seawater *** α-Co（OH）2-xClxseawater batteries display superior onset and half-wave potentials of 0.71 and 0.66 V,respectively,which are much better than the counterparts of α-Co（OH）2and of β-Co（OH）2with no Cl-penetrating and no buffer *** α-Co（OH）2-xClx-based seawater batteries display stable open-circuit potential of 1.69 V and outstanding specific capacity of 1345 mAh·g-1.

关键词： Seawater battery Oxygen reduction electrocatalyst Solution high-temperature shock Structural buffer engineering

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Understanding the spatial interaction of ultrasounds based on three-dimensional dual-frequency ultrasonic field numerical simulation

引用

China Foundry 2024年第1期21卷 29-43页

作者： Zhao-yang Yin Qi-chi Le Yan-chao Jiang Da-zhi Zhao Qi-yu Liao Qi Zou key Lab of electromagnetic processing of materials Ministry of EducationNortheastern UniversityShenyang 110819China School of materials Science and Engineering Northeastern UniversityShenyang 110819China

A transient 3D model was established to investigate the effect of spatial interaction of ultrasounds on the dual-frequency ultrasonic field in magnesium alloy *** effects of insertion depth and tip shape of the ultrasonic rods,input pressures and their ratio on the acoustic field distribution were discussed in ***,the spacing,angle,and insertion depth of two ultrasonic rods significantly affect the interaction between distinct *** a result,various acoustic pressure distributions and cavitation regions are *** spherical rods mitigate the longitudinal and transversal attenuation of acoustic pressure and expand the cavitation volume by 53.7%and 31.7%,respectively,compared to the plate and conical *** the input pressure will enlarge the cavitation region but has no effect on the acoustic pressure distribution *** acoustic pressure ratio significantly affects the pressure distribution and the cavitation region,and the best cavitation effect is obtained at the ratio of 2:1(P15:P20).

关键词： dual-frequency ultrasonic numerical model acoustic pressure spatial interaction magnesium alloy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Pd cluster decorated free standing flexible cathode for high performance Li-oxygen batteries

引用

Nano Research 2024年第4期17卷 2678-2686页

作者： Liang Guo Guoliang Zhang Ruonan Yang Dongmei Zhang Xiuqi Zhang Han Yu Xia Li Feng Dang key laboratory for Liquid-Solid Structure Evolution and processing of materials Ministry of EducationShandong UniversityJinan 250061China

As a promising candidate for the next generation energy storage system,rechargeable lithium-oxygen batteries(LOBs)still face substantial challenges caused by insulating discharge products that preclude their practical *** highly efficient cathode catalysts capable of facilitating formation/decomposition of discharge products is considered as an essential approach towards high performance ***,Pd decorated Te nanowires(Pd@Te NWs)were synthesized as advanced catalyst in LOBs to maximize Pd utilization and achieve synergistic effect,in which Pd clusters were uniformly grown on Te substrate though regulating the Pd:Te ***,Pd@Te nanowires assembled into an interpenetrating network-like structure by vacuum filtration and employed as flexible cathode,enabling LOBs achieved an ultralong 190 cycles stability and a superior specific capacity of 3.35 mAh·cm^(-2).Experimental studies and density functional theory(DFT)calculations reveal the excellent catalytic ability of Pd@Te and synergistic catalytic mechanism of Pd and Te,in which uniform electron distribution,extensive electron exchange,and large adsorption distance between Pd cluster and discharge products promote homogeneous adsorption/desorption of discharge products,while the high adsorption energy of Te substrate for Li species reduces the initial dynamical energy barrier during discharging *** current work provides viable strategy to design composite catalysts for flexible cathode of LOBs with synergistic catalytic effects.

关键词： flexible lithium-oxygen batteries Pd@Te synergistic catalysis cathode catalysts density functional theory(DFT)calculation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A multi-functional MgF_(2)/polydopamine/hyaluronan-astaxanthin coating on the biodegradable ZE21B alloy with better corrosion resistance and biocompatibility for cardiovascular application

引用

Journal of Magnesium and Alloys 2024年第3期12卷 1102-1116页

作者： Yachen Hou Xueqi Zhang Jingan Li Liguo Wang Shaokang Guan School of materials Science and Engineering and Henan key laboratory of Advanced Magnesium Alloy and key laboratory of materials processing and Mold Technology(ministry of education) Zhengzhou UniversityZhengzhou 450001China

The cardiovascular diseases(CVD)continue to be the major threat to global public health over the years,while one of the effective methods to treat CVD is stent *** magnesium(Mg)alloys have great potential applications in cardiovascular stents benefit from their excellent biodegradability and ***,excessive degradation rate and the delayed surface endothelialization still limit their further *** this study,we modified a Mg-Zn-Y-Nd alloy(ZE21B)by preparing MgF_(2) as the corrosion resistance layer,the dopamine polymer film(PDA)as the bonding layer,and hyaluronic acid(HA)loaded astaxanthin(ASTA)as an important layer to directing the cardiovascular cells *** electrochemical test results showed that the MgF_(2)/PDA/HA-ASTA coating improved the corrosion resistance of *** cytocompatibility experiments also demonstrated that this novel composite coating also selectively promoted endothelial cells proliferation,inhibited hyperproliferation of smooth muscle cells and adhesion of *** with the HAloaded rapamycin(RAPA)coating,our MgF_(2)/PDA/HA-ASTA coating showed better blood compatibility and cytocompatibility,indicating stronger multi-functions for the ZE21B alloy on cardiovascular application.

关键词： Biodegradable ZE21B alloy Reendothelialization Surface modification Hyaluronic acid Astaxanthin.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure and mechanical properties of a cast TRIP-assisted multiphase stainless steel

引用

China Foundry 2024年第3期21卷 221-228页

作者： Meng-xin Wang Zi-xiang Wu Jing-yu He Xiang Chen School of materials Science and Engineering Tsinghua UniversityBeijing 100084China key laboratory for Advanced materials processing Technology Ministry of EducationBeijing 100084China

Stainless steels are used in a wide range of complex environments due to their excellent corrosion *** stainless steels can offer an excellent combination of strength,toughness and corrosion resistance due to the coexistence of different *** microstructure and mechanical properties of a novel cast multiphase stainless steel,composed of martensite,ferrite,and austenite,were investigated following appropriate heat treatment processes:solution treatment at 1,050℃ for 0.5 h followed by water quenching to room temperature,and aging treatment at 500℃ for 4 h followed by water quenching to room *** show reversed austenite is formed by diffusion of Ni element during aging process,and the enrichment of Ni atoms directly determines the mechanical stability of *** austenite with a lower Ni content undergoes a martensitic transformation during plastic *** tensile strength of the specimen exceeds 1,100 MPa and the elongation exceeds 24%after solid solution,and further increases to 1,247 MPa and 25%after aging *** enhancement is due to the TRIP effect of austenite and the precipitation of the nanoscale G-phase pinning dislocations in ferrite and martensite.

关键词： multiphase stainless steel mechanical properties TRIP effect reversed austenite G-phase

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of Artificial Cooling Extrusion on Microstructure and Mechanical Properties of Mg–Zn–Y Alloys

引用

Acta Metallurgica Sinica(English Letters) 2024年第7期37卷 1115-1127页

作者： Qi-Yu Liao Da-Zhi Zhao Qi-Chi Le Wen-Xin Hu Yan-Chao Jiang Wei-Yang Zhou Liang Ren Dan-Dan Li Zhao-Yang Yin School of materials Science and Engineering Northeastern UniversityShenyang110819China key laboratory of electromagnetic processing of materials Ministry of EducationNortheastern UniversityShenyang110819China key laboratory of Lightweight Structural materials Liaoning ProvinceNortheastern UniversityShenyang110819China Baotou Research Institute of Rare Earths Baotou014000China

Microstructure and mechanical properties of Mg–Zn–Y alloys with different Zn/Y atomic ratios with or without artificial cooling (AC) extrusion were systematically investigated in this work. The results show that bimodal microstructure consisting of submicron dynamic recrystallized (DRXed) grains with high fraction of low-angle grain boundaries (LAGBs) and elongated unDRXed grains was formed in Mg_(98.7)Zn_(1)Y_(0.3) alloy with AC extrusion. The AC process effectively limits the growth of precipitated phases, and large amount of nanoscale precipitates were dynamically precipitated during the extrusion process. AC extrusion could effectually refine the lamellar 14H LPSO phases and inhibit the transition from stacking faults to LSPO phases in Mg_(98)Zn_(1)Y_(1) alloy and the narrow LPSO phase in Mg_(98)Zn_(1)Y_(1)-AC alloy which could promote the nucleation of DRXed grains. The AC extrusion significantly improves the strength of Mg–Zn–Y alloys. Owing to AC extrusion, the strength improvement of Mg_(98.7)Zn_(1)Y_(0.3) alloy is mainly attributed to fine grain strengthening, dislocation strengthening, and nano-phases precipitation strengthening. After AC process, more fine grains and nano-phases jointly strengthen the Mg_(98)Zn_(1)Y_(1) alloy. The Mg_(98)Zn_(1)Y_(1) alloy obtains optimal mechanical properties after extrusion at 623 K, with ultimate tensile strength (UTS) of 406 MPa, yield strength (YS) of 388 MPa, and elongation (EL) of 5.6%.

关键词： Mg-Zn-Y Artificial cooling Extrusion Microstructure Mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Study on the low mechanical anisotropy of extruded Mg-Zn-Mn-Ce-Ca alloy tube in the compression process

引用

Journal of Magnesium and Alloys 2024年第3期12卷 1054-1067页

作者： Dandan Li Qichi Le Xiong Zhou Xiaoqiang Li Chenglu Hu Ruizhen Guo Tong Wang Ping Wang Wenxin Hu The key laboratory of electromagnetic processing of materials Ministry of EducationNortheastern UniversityShenyang 110819China State key laboratory of Baiyunobo Rare Earth Resource Research and Comprehensive Utilization Baotou Research Institute of Rare EarthsBaotou 014030China

In this study,the extruded Mg-Zn-Mn-Ce-Ca alloy tube with a low compression anisotropy along the ED,45ED and TD was *** effect of the second phases,initial texture and deformation behavior on this low mechanical anisotropy was *** results revealed that the alloy tube contains the high content(Mg1-xZnx)11Ce phase and the low content of Mg12Ce *** second phases are respectively incoherent and coherent with the Mg matrix,and their influence can be ***,the alloy tube exhibited a weak basal fiber texture,where the c-axis was aligned along the 0°∼30°tilt from TD to *** a texture made the initial deformation(at 1.0%∼1.6%strain)of the three samples controlled by comparable basal*** deformation progressed(1.6∼9.0%strain),larger amounts of ETWs nucleated and gradually approached saturation in the three samples,re-orienting the c-axis to a 0°∼±30°deviation with respect to the loading ***,the prismatic and pyramidalslips replaced the dominant deformation progressively until ***,the similar deformation mechanisms determined by the weak initial texture in the three samples contribute to the comparable strain hardening rates,resulting in the low compressive anisotropy of the alloy tube.

关键词： Mg alloy tube Low mechanical anisotropy Weak texture Deformation mechanism.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Robust, breathable, and chemical-resistant polytetrafluoroethylene (PTFE) films achieved by novel in-situ fibrillation strategy for highperformance triboelectric nanogenerators

引用

Nano Research 2024年第3期17卷 1942-1951页

作者： Jialong Chai Guilong Wang Jinchuan Zhao Guizhen Wang Chao Wei Aimin Zhang Guoqun Zhao laboratory for Liquid-Solid Structural Evolution and processing of materials(ministry of education) Shandong UniversityJinan 250061China key laboratory of Chinese education ministry for Tropical Biological Resources Hainan UniversityHaikou 570228China

In the era of advanced wearable electronic devices,the triboelectric nanogenerators(TENGs)as energy harvesting and self-powered sensing units hold great *** appropriate triboelectric material is the crucial factor to optimize the performance of TENG,while polytetrafluoroethylene(PTFE)stands out as a highly versatile option among the various *** this study,we present an ultrafine nanofibrous PTFE(NF-PTFE)films prepared by novel in-situ fibrillation strategy as the triboelectric material in TENG *** innovative processing methodology facilely addresses the dilemma between high porosity and fine pore size of traditional porous PTFE films,meanwhile achieves exceptional mechanical strength,hydrophobicity,air permeability,and chemical resistance of the *** the integration of nanofibrous PTFE films into contact-separation mode TENG and droplet-based TENG,these devices realize the peak electrical output of 131 V/10.8μA and 54 V/14μA with great durability,which surpass the performance of TENGs using traditional expanded PTFE ***,a smart glove capable of recognizing hand gestures is proposed,which demonstrates the versatility,flexibility,and practicality of this material for potential use in smart *** reported NF-PTFE film provides insights for the design of high-performance TENG device for advanced wearable electrical applications.

关键词： polytetrafluoroethylene(PTFE) nanofibrous film hydrophobic triboelectric nanogenerator self-powered sensor

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Numerical simulation of melt flow and temperature field during DC casting 2024 aluminium alloy under different casting conditions

引用

China Foundry 2024年第4期21卷 387-396页

作者： Jin-chuan Wang Yu-bo Zuo Qing-feng Zhu Jing Li Rui Wang Xu-dong Liu key laboratory of electromagnetic processing of materials Ministry of EducationNortheastern UniversityShenyang 110819China School of materials Science and Engineering Northeastern UniversityShenyang 110819China Engineering Research Center of Advanced materials Preparing Technology Ministry of EducationShenyang 110819China CAS key laboratory of Nuclear materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China

Casting speed,casting temperature and secondary cooling water flow rate are the main process parameters affecting the DC casting *** parameters significantly influence the flow and temperature fields during casting,which are crucial for the quality of the ingot and can determine the success or failure of the casting *** simulation,with the advantages of low cost,rapid execution,and visualized results,is an important method to study and optimize the DC casting *** the present work,a simulation model of DC casting 2024 aluminum alloy was established,and the reliability of the model was ***,the influence of casting parameters on flow field and temperature field was studied in detail by numerical simulation *** show that with the increase of casting speed,the melt flow becomes faster,the depths of slurry zone and mushy zone increase,and the variation of slurry zone depth is greater than that of mushy *** an increase in casting temperature,the melt flow rate increases,the depth of the slurry zone becomes shallower,and the depth of the mushy zone experiences only minor *** simulation results further indicate that the increase of the flow rate of the secondary cooling water slightly reduces the depths of both slurry and mushy zone.

关键词： aluminium DC casting flow field temperature field numerical simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The deteriorated degradation resistance of Mg alloy microtubes for vascular stent under the coupling effect of radial compressive stress and dynamic medium

引用

Journal of Magnesium and Alloys 2024年第2期12卷 573-585页

作者： Mengyao Liu Yabo Zhang Qingyuan Zhang Yan Wang Di Mei Yufeng Sun Liguo Wang Shijie Zhu Shaokang Guan School of materials Science and Engineering Zhengzhou UniversityZhengzhou 450001China Henan key laboratory of Advanced Magnesium Alloys Zhengzhou 450002China key laboratory of Advanced materials processing&Mold ministry of education Zhengzhou 450002China

The degradation of Mg alloys relates to the service performance of Mg alloy biodegradable *** order to investigate the degradation behavior of Mg alloys as vascular stent materials in the near service environment,the hot-extruded fine-grained Mg-Zn-Y-Nd alloy microtubes,which are employed to manufacture vascular stents,were tested under radial compressive stress in the dynamic Hanks'Balanced Salt Solution(HBSS).The results revealed that the high flow rate accelerates the degradation of Mg alloy microtubes and its degradation is sensitive to radial compressive *** results contribute to understanding the service performance of Mg alloys as vascular stent materials.

关键词： Mg alloy Microtubes Degradation behavior Radial compressive stress Dynamic conditions

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：