检索结果-南通市图书馆

Chinese Chemical Letters 2024年第3期35卷 453-460页

作者： Kang Yang Long Li Yuanbin Xiao Qiaoli Zhang Chenpeng Xi Borong Li Yan Yu Chengkai Yang key laboratory of advanced materials technologies International(HongKong Macao and Taiwan)Joint Laboratory on Advanced Materials TechnologiesCollege of Materials Science and EngineeringFuzhou UniversityFuzhou 350108China

The development of lithium-metal batteries(LMBs)is seriously restricted by the out-of-control dendrites growth and infinite volume ***,a pervasive organic-inorganic layer construction strategy is reported for the composite lithium metal anode with congener-derived organic-inorganic solid electrolyte interphase(SEI).In this strategy,the organic-inorganic Ag@polydopamine(Ag@PDA)layer is coated on the arbitrary substrates by a simple two-step *** thin and stable congener-derived SEI is insitu formed with fewer inorganic components and more organic components during charging/*** polydopamine with sufficient adhesion groups and lithiophilic Ag layer realize near-zero nucleation overpotential during lithium *** low interface resistance and stable lithium deposition are ***,the practical areal and volumetric capacities of the composite anode with three-dimensional copper(3DCu)as the substrate are 10 mAh/cm^(2)and 1538 mAh/cm^3(*** mass of anode).The symmetrical cell shows very low polarization voltage(10 mV)and more than 2500 h cycles life at 1 mA/cm^(2)(1 mAh/cm^(2)).The LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)-based full cells show improved capacity retention(82%)after 100 cycles at 0.5 *** modified lithiophilic anode with congener-derived interphase provides a promising strategy to realize the next-generation dendrite-free LMBs.

关键词： Lithium metal anode Congener-derived Lithiophilicity Volumetric capacity Organic-inorganic interphase

Preventing formation of intermetallic compounds in ultrasonic-assisted Sn soldering of Mg/Al alloys through pre-plating a Ni coating layer on the Mg substrate

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 726-741页

作者： Yingzong Liu Yuanxing Li Hui Chen Zongtao Zhu key laboratory of advanced technologies of materials Ministry of EducationSchool of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031PR China

Magnesium and aluminum alloys are widely used in various industries because of their excellent properties,and their reliable connection may increase application of *** compounds(IMCs)affect the joint performance of Mg/*** this study,AZ31 Mg alloy with/without a nickel(Ni)coating layer and 6061 Al alloy were joined by ultrasonic-assisted soldering with Sn-3.0Ag-0.5Cu(SAC)*** effects of the Ni coating layer on the microstructure and mechanical properties of Mg/Al joints were systematically *** Ni coating layer had a significant effect on formation of the Mg_(2)Sn IMC and the mechanical properties of Mg/Al *** blocky Mg_(2)Sn IMC formed in the Mg/SAC/Al joints without a Ni coating *** content of the Mg_(2)Sn IMC increased with increasing soldering temperature,but the joint strength *** joint without a Ni coating layer fractured at the blocky Mg_(2)Sn IMC in the solder,and the maximum shear strength was 32.2 *** pre-plating Ni on the Mg substrate,formation of the blocky Mg_(2)Sn IMC was inhibited in the soldering temperature range 240–280℃and the joint strength ***,when the soldering temperature increased to 310℃,the blocky Mg_(2)Sn IMC precipitated again in the *** electron microscopy showed that some nano-sized Mg_(2)Sn IMC and the(Cu,Ni)_(6)Sn_(5)phase formed in the Mg(Ni)/SAC/Al joint soldered at 280℃,indicating that the Ni coating layer could no longer prevent diffusion of Mg into the solder when the soldering temperature was higher than 280℃.The maximum shear strength of the Mg(Ni)/SAC/Al joint was 58.2 MPa for a soldering temperature of 280℃,which was 80.7%higher than that of the Mg/SAC/Al joint,and the joint was broken at the Mg(Ni)/SAC ***-plating Ni is a feasible way to inhibit formation of IMCs when joining dissimilar metals.

关键词： Ultrasonic-assisted soldering Mg_(2)Sn Ni coating layer Shear strength

Phase-field simulation of precipitation kinetics and creep properties of Ni-Al-Cr/Ta superalloys

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第4期67卷 1139-1150页

作者： YANG ShuaiGe ZHANG Zan ZHUO JiCheng LONG HongLi LI YongSheng National key laboratory of advanced Casting technologies MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials TechnologyEngineering Research Center of Materials Behavior and DesignMinistry of EducationNanjing University of Science and TechnologyNanjing 210094China

The precipitation kinetics ofγ'-Ni_(3)(Al,Ta)phase and creep properties of Ni-15Al-x Ta at.%superalloys are investigated by the crystal plasticity phase-field *** results show that the high Ta content brings a lower creep strain for the deceleration and steady creep stage,while the creep lifetime is *** large external strain intensifies the creep damage and shortens the creep life of Ni-15Al-3Ta at.%*** kinetics evolution and elements distribution are revealed in the quaternary Ni-10Al-8.5Cr-xT a(x=1.5 at.%,2.0 at.%,2.5 at.%)superalloys by the multi-component phase-field *** anti-phase boundary(APB)changes the coarsening mechanism ofγ'phase,and Ta promotes the precipitation ofγ'phase with an increasing volume fraction and particle *** composition difference betweenγ'andγphases increases with the rising of Ta content,the strong partitioning of Ta toγ'phase strengthens the partitioning of Ni and Cr toγmatrix,and Ta shows a superiority than Al in the lattice site occupation of L1_(2)-Ni_(3)(Al,X)*** an importantγ'phase forming element,the optimization of Ta content is essential for improving the mechanical properties of Ni-based superalloys.

关键词： Ni-Al-Ta alloys creep properties kinetics phase-field

Design and tailoring of patterned ZnO nanostructures for perovskite light absorption modulation

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2024年第5期31卷 855-861页

作者： Haonan Si Xuan Zhao Qingliang Liao Yue Zhang Academy for advanced Interdisciplinary Science and Technology Beijing Advanced Innovation Center for Materials Genome EngineeringUniversity of Science and Technology BeijingBeijing 100083China key laboratory of advanced materials and Devices for Post-Moore Chips Ministry of EducationBeijing Key Laboratory for Advanced Energy Materials and TechnologiesSchool of Materials Science and EngineeringUniversity of Science and Technology BeijingBeijing 100083China

Lithography is a pivotal micro/nanomanufacturing technique,facilitating performance enhancements in an extensive array of devices,encompassing sensors,transistors,and photovoltaic *** key to creating highly precise,multiscale-distributed patterned structures is the precise control of the lithography ***,high-quality patterned ZnO nanostructures are constructed by systematically tuning the exposure and development times during *** optimizing these parameters,ZnO nanorod arrays with line/hole arrangements are successfully *** ZnO nanostructures with highly controllable morphology and structure possess discrete three-dimensional space structure,enlarged surface area,and improved light capture ability,which achieve highly efficient energy conversion in perovskite solar *** lithography process management for these patterned ZnO nanostructures provides important guidance for the design and construction of complex nanostructures and devices with excellent performance.

关键词： lithography patterned ZnO nanorod arrays light absorption perovskite solar cell

A high-sensitive and self-selective humanoid mechanoreceptor for spatiotemporal tactile stimuli cognition

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 4400-4409页

作者： Shuxin Bi Xuan Zhao Fangfang Gao Xiaochen Xun Bin Zhao Liangxu Xu Tian Ouyang Qingliang Liao Yue Zhang Academy for advanced Interdisciplinary Science and Technology Beijing Advanced Innovation Center for Materials Genome EngineeringUniversity of Science and Technology(Beijing)Beijing 100083China key laboratory of advanced materials and Devices for Post-Moore Chips Ministry of EducationBeijing Key Laboratory for Advanced Energy Materials and TechnologiesSchool of Materials Science and EngineeringUniversity of Science and Technology BeijingBeijing 100083China

The cognition of spatiotemporal tactile stimuli,including fine spatial stimuli and static/dynamic temporal stimuli,is paramount for intelligent robots to feel their surroundings and complete manipulation ***,current tactile sensors have restrictions on simultaneously demonstrating high sensitivity and performing selective responses to static/dynamic stimuli,making it a challenge to effectively cognize spatiotemporal tactile ***,we report a high-sensitive and self-selective humanoid mechanoreceptor(HMR)that can precisely respond to spatiotemporal tactile *** HMR with PDMS/chitosan@CNTs(PDMS:polydimethylsiloxane;CNT:carbon nanotube)graded microstructures and polyurethane hierarchical porous spacer exhibits high sensitivity of 3790.8 kPa^(-1).The HMR demonstrates self-selective responses to static and dynamic stimuli with mono signal through the hybrid of piezoresistive and triboelectric ***,it can respond to spatiotemporal tactile stimuli and generate distinguishable and multi-type characteristic *** the assistance of the convolutional neural network,multiple target objects can be easily identified with a high accuracy of 99.1%.This work shows great potential in object precise identification and dexterous manipulation,which is the basis of intelligent robots and natural human-machine interactions.

关键词： mechanoreceptors self-selective high-sensitive spatiotemporal tactile stimuli cognition sensors

Effects of longitudinal magnetic field on primary dendrite spacing and segregation of directionally solidified single crystal superalloy

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Progress in Natural Science:materials International 2024年第1期34卷 26-36页

作者： Congjiang Zhang Yilin Zhou Chen Shen Weili Ren Xiaotan Yuan Biao Ding Haibiao Lu Zuosheng Lei Yunbo Zhong Ang Zhang State key laboratory of advanced Special Steel College of Materials Science and Engineering Shanghai University National Engineering Research Center for Magnesium Alloys Natural Key Laboratory of Advanced Casting Technologies College of Materials Science and EngineeringChongqing University

The primary dendrite spacing(PDS) and segregation of directionally solidified single crystal(SC) superalloy under the longitudinal magnetic field(LMF) were investigated based on the analysis of the whole cross-sectional microstructure at different solidification distances. The results show that the PDS under the LMF remains basically unchanged at different solidification distances, and it is greater than that under no LMF. With the increase of magnetic field intensity, the PDS increases and the macrosegregation decreases. The increasing PDS and reducing segregation under the LMF can be attributed to the increase of solute boundary layer, which expands the non-equilibrium freezing temperature range and brings the effective partition coefficient closer to 1. The increase of the solute enrichment layer thickness could be caused by the downward secondary circulation generated by the thermoelectric magnetic convection(TEMC) near the interface, which drives the migration of solutes towards the interdendritic region. This work not only clarifies the mechanism of LMF controlling PDS and reducing segregation by TEMC, but also provides theoretical guidance for producing high-quality SC superalloys using magnetic fields.

关键词： Primary dendrite spacing Segregation Single crystal superalloy Directional solidification Magnetic field Thermoelectric magnetic convection

Synthesis and characterization of high entropy(TiVNbTaM)_(2)AlC(M=Zr,Hf)ceramics

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of advanced Ceramics 2024年第2期13卷 237-246页

作者： Lei Cao Qiqiang Zhang Lijing Du Shuai Fu Detian Wan Yiwang Bao Qingguo Feng Chunfeng Hu key laboratory of advanced technologies of materials Ministry of EducationSchool of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031China State key laboratory of Green Building materials China Building Materials AcademyBeijing 100024China

The high-entropy design of MAX phases is expected to confer superior properties,but its study was hindered by the complex synthesis method and limited purity of *** this work,two noteworthy types of high-entropy MAX phase structural ceramics,high-entropy(TiVNbTaM)_(2)AlC(M=Zr,Hf),were designed and prepared by the in-situ synthesis using spark plasma sintering(SPS).The microstructure and lattice parameters of sintered samples were *** with the single-component MAX phases,the highly pure high-entropy(TiVNbTaZr)_(2)AlC sample had good physical and mechanical properties,including electrical conductivity of 0.96×106Ω^(-1)·m^(-1),thermal expansion coefficient of 3.65×10^(-6) K^(-1),thermal conductivity of 8.98 W·m^(-1)·K^(-1),Vickers hardness of 9.80 GPa,flexural strength of 507 MPa,fracture toughness of 5.62 MPa·m^(1/2),and compressive strength of 1364 MPa,which exhibited the remarkable hardening-strengthening effect.

关键词： MAX phase high-entropy ceramic microstructure physical properties mechanical properties

Ordered Bicontinuous Network Structures Regulated by Orientational Interactions in a Rod-Coil Block Copolymer

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第5期42卷 636-642,I0008页

作者： Xiao-Lin Lyu Shi-Chu Yang An-Qi Xiao Ping-Ping Hou Wei Zhang Hong-Bing Pan Zhi-Hao Shen Xing-He Fan Qi-Feng Zhou Beijing National laboratory for Molecular Sciences Key Laboratory of Polymer Chemistry and Physics of Ministry of EducationCollege of Chemistry and Molecular EngineeringPeking UniversityBeijing100871China key laboratory of advanced materials technologies International(HongKong Macao and Taiwan)Joint Laboratory on Advanced Materials TechnologiesCollege of Materials Science and EngineeringFuzhou UniversityFuzhou350108China

The rich phase behavior of block copolymers(BCPs)has drawn great attention in recent ***,the double diamond(DD)phase is rarely obtained because of the competition between the minimization of interfacial energy and packing ***,a rod-coil BCP containing mesogen-jacketed liquid crystalline polymer is designed to acquire ordered bicontinuous network *** reduction of internal energy originating from the orientational interaction among the rod blocks can compensate for the free energy penalty of packing frustration to stabilize the DD *** resulting BCP can also experience lamellae-to-DD and double gyroid-to-lamellae transitions by changing the annealing *** results make the rod-coil BCP an excellent candidate for the self-assembly of ordered network structures,demonstrating great potential in nanopatterning and metamaterials.

关键词： Block copolymer Rod-coil Ordered bicontinuous phase Double diamond Double gyroid

materials design and preparation of ultrathin two-dimensional metal halide perovskites

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第7期17卷 6231-6246页

作者： Xiaomin Zhang Sihan Zhao Junran Zhang Lin Wang School of Flexible Electronics(Future technologies)and Institute of advanced materials Key Laboratory of Flexible ElectronicsJiangsu National Synergetic Innovation Center for Advanced MaterialsSchool of Physical and Mathematical SciencesNanjing Tech UniversityNanjing 211816China

Metal halide perovskites(MHPs)have emerged as highly promising candidates for the next generation of photonics and optoelectronic devices,owing to their prominent optical and excitonic properties,as well as the convenience of ***,ultrathin two-dimensional(2D)MHPs,which are generally prepared by exfoliation,solution growth,and chemical vapor deposition method,have attracted dramatically increasing attentions owing to their combined features of ultrathin 2D morphology and superior performance of *** the growing interest in ultrathin 2D MHPs,there is currently a lack of a comprehensive and systematic overview of the distinct advantages offered by each growth method for producing these *** review critically assesses the preliminary studies on the materials design and preparation of ultrathin ***,it explores heterostructures based on ultrathin MHPs and offers insights into the challenges and opportunities that lie ahead for this enticing class of 2D materials.

关键词： ultrathin perovskites material preparation exfoliation solution growth chemical vapor deposition

Progress on the program of Si-compatible two-dimensional semiconductor materials and devices

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第6期67卷 152-171页

作者： Mingsheng XU Yuwei WANG Jiwei LIU Deren YANG College of Integrated Circuits State Key Laboratory of Silicon and Advanced Semiconductor MaterialsZhejiang University School of materials Science and Engineering State Key Laboratory of Silicon and Advanced Semiconductor MaterialsZhejiang University

Two-dimensional(2D) materials are at the forefront of innovation, heralding a new era for nextgeneration electronics and optoelectronics. These materials are distinguished by their unique structural characteristics: they have no hanging bonds on their surface, exhibit weakened electrostatic shielding in the Z-direction, and boast atomic thickness in their monolayers. These features have led to groundbreaking discoveries in electrical, optical, and magnetic properties, paving the way for advancements in low-power electronics, valleytronics, infrared detectors, and memory devices. Despite these promising developments,Si-based technologies continue to dominate the landscape of next-generation electronics and optoelectronics,as well as heterogeneous integration. In response to this ongoing evolution, the National Natural Science Foundation of China(NSFC) initiated a major program in 2021 dubbed “Si-compatible two-dimensional semiconductor materials and devices”. This study reviews the progress made under the NSFC Program,spotlighting its main achievements and outlining key future research directions. Additionally, it sheds light on the challenges that researchers in the 2D domain face, particularly in developing Si-compatible 2D technologies.

关键词： two-dimensional materials Si-based CMOS technologies electronics and optoelectronics heterogeneous integration low-power