检索结果-南通市图书馆

Numerical analysis of moving train induced vibrations on tunnel,surrounding ground and structure

在线全文

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第1期23卷 179-192页

作者： Swati Srivastav Sowmiya Chawla Swapnil Mishra Department of Applied Geophysics Indian Institute of Technology(ISM)Dhanbad 826004India Department of Civil Engineering Indian Institute of Technology(ISM)Dhanbad 826004India Department of Mining Engineering Indian Institute of Technology(ISM)Dhanbad 826004India

This study is focused on the effect of vibration induced by moving trains in tunnels on the surrounding ground and structures.A three-dimensional finite element model is established for a one-track railway tunnel and an adjacent twelve-storey building frame by using commercial software Midas GTS-NX(2019)and Midas *** study considered the moving load effect of a complete train,which varies with space as well as with *** effect of factors such as train speed,overburden pressure on the tunnel and variation in soil properties are studied in the time *** a result,the variations in horizontal and vertical acceleration for two different sites,i.e.,the free ground surface(without structure)and the area containing the structure,are ***,the displacement pattern of the raft foundation is plotted for different train *** lower speeds,the heaving phenomenon is negligible,but as the speed increases,both the heaving and differential settlement increase in the *** study demonstrates that the effect of moving train vibrations should be considered in the design of new nearby structures and proper ground improvement should be considered for existing structures.

关键词： moving train load tunnels vibration effect finite element method(FEM) wave propagation

Controlling Tendons to Modulate Stiffness of a Planar-to-Spatial Tendon-Driven Continuum Manipulator Under External Uncertain Forces

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第2期21卷 821-841页

作者： Vipin Pachouri Pushparaj Mani Pathak indian Institute of Technology Roorkee Roorkee247667India

Continuum manipulators(CM)are soft and flexible manipulators with large numbers of degrees of freedom and can perform complex tasks in an unstructured ***,their deformability and compliance can deviate distal tip under uncertain external *** address this challenge,a novel tension-based control scheme has been proposed to modulate the stiffness of a tendon-driven CM,reducing the tip position errors caused by uncertain external *** minimize the tip position error,a virtual spring is positioned between the deviated and the desired tip *** proposed algorithm corrects the manipulator deviated tip position,improving tension distribution and stiffness profile,resulting in higher stiffness and better *** corresponding task space stiffness and condition numbers are also computed under different cases,indicating the effectiveness of the tension control scheme in modulating the manipulator's *** validation conducted on an in-house developed prototype confirms the practical feasibility of the proposed approach.

关键词： Continuum arm Hyper-redundant robots Variable stiffness manipulator Tension-based control Mechatronic systems

Process engineering of demineralisation of moderate to high ash indian coals through NaOH‑HCl leaching and HF leaching

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Coal Science & Technology 2024年第2期11卷 111-122页

作者： Heena Dhawan D.K.Sharma ANRF Ministry of ScienceNew DelhiIndia Department of Energy Science and Engineering Indian Institute of Technology DelhiNew Delhi 110016India

Chemical leaching of coals would be required to produce cleaner coals for some special applications where physical benefi-ciation may not be effective *** would also help in recovering Li and rare earth metals besides in the sequestration of CO_(2).About 20 indian coals having complexly distributed moderate to high ash contents were sequentially treated with various alkali–acid such as NaOH-HCl,HF,HCl,HCl-HF,and NaOH-HCl-HF *** aimed to establish and design the best stepwise sequential process for the highest degree of demineralisation through a chemical leaching *** and process intensification studies were carried *** than 80%demineralisation of Madhaipur and Neemcha coals was observed using the best sequential treatment designed *** repeated stepwise treatment of the alkali and the acid was also studied,which was found to significantly enhance the degree of demineralisation of *** integrated process of alkali–acid leaching followed by solvent extraction(Organo-refining)and vice versa of the treated coal was also studied for producing cleaner coals.

关键词： Alkali–acid leaching Demineralisation Integrated process Rare earth elements

Defect mediated losses and degradation of perovskite solar cells:Origin impacts and reliable characterization techniques

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 217-253页

作者： Himangshu Baishy Ramkrishna Das Adhikari Mayur Jagdishbhai Patel Deepak Yadav Tapashi Sarmah Mizanur Alam Manab Kalita Parameswar Krishnan lyer Centre for Nanotechnology Indian Institute of Technology GuwahatiGuwahati 781039AssamIndia Department of Chemistry Indian Institute ofTechnology GuwahatGuwahati739AssamIndi

The rapid advancement of halide-based hybrid perovskite materials has garnered significant research attention,particularly in the domain of photovoltaic *** to their exceptional optoelec-tronic properties,they demonstrated power conversion efficiency(PcE)of over 25%in single junction solar *** the notable progress in PCE over the past decade,the inherent high defect density pre-senting in perovskite materials gives rise to several loss mechanisms and associated ion migration in per-ovskite solar cells(PsCs)during operational *** factors collectively contribute to a significant stability challenge in PsCs,placing their longevity far behind for *** numerous reports have explored defects,ion migration,and their impacts on device performance,a com-prehensive correlation between the types of defects and the degradation kinetics of perovskite materials and PsCs has been *** this context,this review aims to provide a comprehensive overview of the origins of defects and ion migration,emphasizing their correlation with the degradation kinetics of per-ovskite materials and PsCs,leveraging reliable characterization ***,these charac-terization techniques are intended to comprehend loss mechanisms by different passivation approaches to enhance the durability and PCE of PSCs.

关键词： Perovskite solar cells Defects lon migration Degradation Stability

Direct scaling of residual displacements for bilinear and pinching oscillators

在线全文

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第1期23卷 129-149页

作者： Mohammad Saifullah Vinay K.Gupta Department of Civil Engineering Indian Institute of Technology KanpurKanpur 208016India

The estimation of residual displacements in a structure due to an anticipated earthquake event has increasingly become an important component of performance-based earthquake engineering because controlling these displacements plays an important role in ensuring cost-feasible or cost-effective repairs in a damaged structure after the *** attempt is made in this study to obtain statistical estimates of constant-ductility residual displacement spectra for bilinear and pinching oscillators with 5%initial damping,directly in terms of easily available seismological,site,and model *** of the available models for the bilinear and pinching oscillators are useful when design spectra for a seismic hazard at a site are not *** statistical estimates of a residual displacement spectrum are proposed in terms of earthquake magnitude,epicentral distance,site geology parameter,and three model parameters for a given set of ductility demand and a hysteretic energy capacity coefficient in the case of bilinear and pinching models,as well as for a given set of pinching parameters for displacement and strength at the breakpoint in the case of pinching model *** proposed scaling model is applicable to horizontal ground motions in the western *** earthquake magnitudes less than 7 or epicentral distances greater than 20 km.

关键词： residual displacement spectrum bilinear hysteresis model pinching hysteresis model nonlinear analysis scaling model

Design of Power System Stabilizer for DFIG-based Wind Energy Integrated Power Systems Under Combined Influence of PLL and Virtual Inertia Controller

在线全文

学校读者我要写书评

暂无评论

Journal of Modern Power Systems and Clean Energy 2024年第2期12卷 524-534页

作者： Balakrushna Sahu Bibhu Prasad Padhy Department of Electrical Engineering Indian Institute of Technology RoparPunjab140001India

Wind energy systems (WESs) based on doubly-fed induction generators (DFIGs) have enormous potential for meeting the future demands related to clean energy. Due to the low inertia and intermittency of power injection, a WES is equipped with a virtual inertial controller (VIC) to support the system during a frequency deviation event. The frequency deviation measured by a phase locked loop (PLL) installed on a point of common coupling (PCC) bus is the input signal to the VIC. However, a VIC with an improper inertial gain could deteriorate the damping of the power system, which may lead to instability. To address this issue, a mathematical formulation for calculating the synchronizing and damping torque coefficients of a WES-integrated single-machine infinite bus (SMIB) system while considering PLL and VIC dynamics is proposed in this paper. In addition, a power system stabilizer (PSS) is designed for wind energy integrated power systems to enhance electromechanical oscillation damping. A small-signal stability assessment is performed using the infinite bus connected to a synchronous generator of higher-order dynamics integrated with a VIC-equipped WES. Finally, the performance and robustness of the proposed PSS is demonstrated through time-domain simulation in SMIB and nine-bus test systems integrated with WES under several case studies.

关键词： Doubly-fed induction generator(DFIG) virtual inertia controller(VIC) phase locked loop(PLL) small-signal analysis synchronizing/damping torque synchronous generator power system stabilizer(PSS)

Gravity-driven powder flow and the influence of external vibration on flow characteristics

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第5期88卷 201-209页

作者： Muhammad Shahid Ansari Ratna Kumar Annabattula Sathyan Subbiah Department of Mechanical Engineering Indian Institute of Technology MadrasChennai 600036India

The controlled and homogeneous flow of dry granular powders through hoppers is essential for applications,namely,packaging of food grains,fertilizers and additive manufacturing processes such as directed energy deposition for better product *** of the major issues encountered in the granular flows through hoppers is flow stagnation due to the well-known arching ***-assisted granular flow through hoppers is one of the mechanisms used for better mass flow *** this work,the influence of external mechanical vibration on the powder flow is investigated experimentally and using discrete element ***,the mass flow rate through the hopper increases with an increase in vibration amplitude and then decreases,signifying the existence of an optimal amplitude of *** DEM simulations explained the underlying mechanisms for the existence of an optimal amplitude of vibration corresponding to the maximum mass flow rate.A range of vibration amplitudes from 0 mm to 3.5 mm is used to study the flow behaviour;the maximum flow of around 33 g/s to 35 g/s is observed for 0.75 mm to 1.25 mm vibration amplitude for the hopper-particle combination studied in this *** work also reports the influence of vibration frequency,hopper,and particle dimension on the flow *** research facilitates the effective use of mechanical vibration to enhance powder flow that can further be extended to non-spherical and multi-material particles.

关键词： Discrete element method Flow rate Granular flow Path tracking Vibration intensity

Ward identities under the frame transformations in curved space-time

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第9期76卷 109-119页

作者： Susobhan Mandal Department of Physics Indian Institute of Technology Bombay

Scalar-tensor theories of gravity are considered to be competitors to Einstein's theory of general relativity for the description of classical gravity, as they are used to build feasible models for cosmic inflation. These theories can be formulated both in the Jordan and Einstein frame, which are related by a Weyl transformation with a field transformation, known together as a frame transformation. These theories formulated in the above two frames are often considered to be equivalent from the point of view of classical theory. However, this is no longer true from the quantum field theoretical perspective. In the present article, we show that the Ward identities derived in the above two frames are not connected through the frame transformation. This shows that the quantum field theories formulated in these two frames are not equivalent to each ***, this inequivalence is also shown by comparing the effective actions derived in these two frames.

关键词： curved spacetime frame transformations ward identities

Enhanced in-vitro degradation resistance and cytocompatibility of a thermomechanically processed novel Mg alloy:Insights into the role of microstructural attributes

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 700-725页

作者： Darothi Bairagi Santanu Mandal Mangal Roy Manas Paliwal Sumantra Mandal Department of Metallurgical and Materials Engineering Indian Institute of TechnologyKharagpur 721302India

The role of microstructural features on in-vitro degradation and surface film development of a thermomechanically processed Mg-4Zn-0.5Ca-0.8Mn alloy has been investigated employing electrochemical studies,scanning electron microscopy and X-ray photoelectron *** specimen forged at 523 K temperature developed a coarse unimodal microstructure consisting of basal oriented grains,whereas the specimens forged at 623 K and 723 K temperatures exhibited bimodal microstructures containing randomly oriented fine grains and basal oriented coarse *** bimodal microstructures exerted higher resistance to corrosion compared to the unimodal microstructure in presence of a protective surface *** optimum size distribution of fine and coarse grains as well as the prevalence of basal oriented grains led to the lowest anodic current density in the specimen forged at 623 *** morphology of Ca_(2)Mg_(6)Zn_(3)precipitates governed the cathodic kinetics by controlling the anode to cathode surface area *** the specimen forged at 723 K comprised comparatively lower fraction of precipitates than at 623 K,the mesh-like precipitate morphology increased the effective cathodic surface area,leading to enhanced localised corrosion in the former *** microstructural features developed at 623 K forging temperature formed a well-protective surface film with lower Mg(OH)_(2)to MgO ratio,exhibiting distinctly high polarization resistance and superior cytocompatibility in terms of cell-proliferation and cell-differentiation.

关键词： Magnesium alloy Microstructure Corrosion Electrochemical impedance spectroscopy X-ray photoelectron spectroscopy Cytotoxicity