检索结果-南通市图书馆

Techno-economic analysis of green hydrogen production by a floating solar photovoltaic system for industrial decarbonization

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Clean Energy 2024年第4期8卷 1-14页

作者： Rahma Muthia Anastasia Segari Putri Pramudya Mochamad Rafly Maulana Widodo Wahyu Purwanto Department of Chemical engineering Faculty of EngineeringUniversitas IndonesiaDepok16424Indonesia Sustainable Energy Systems and Policy Research Cluster Universitas IndonesiaDepok16424Indonesia Master Program in Energy Systems engineering Faculty of EngineeringUniversitas IndonesiaDepok16424Indonesia

This study proposes a conceptual design of green hydrogen production via proton exchange membrane electrolysis powered by a floating solar photovoltaic *** system contributes to industrial decarbonization in which hydrogen blending with natural gas is proposed as an approach to smooth the energy *** proposed design addresses the challenge of supplying a continuous flow-rate of green hydrogen,which is typically demanded by industrial end *** study particularly considers a realistic area required for the installation of a floating solar photovoltaic *** enable the green hydrogen production of 7.5 million standard cubic feet per day,the required structure includes the floating solar photovoltaic system and Li-ion batteries with the nominal capacities of 518.4 megawatts and 780.8 *** is equivalent to the requirement for 1524765 photovoltaic modules and 3718 Li-ion *** assessment confirms the technical viability of the proposed concept of green hydrogen production,transportation and *** the present commercialization is hindered by economics due to a high green hydrogen production cost of USD 26.95 per kg,this green hydrogen pathway is expected to be competitive with grey hydrogen produced via coal gasification and via natural gas steam reforming by 2043 and 2047,respectively.

关键词： floating solar photovoltaics gas blending green hydrogen industrial decarbonization lithium-ion battery photon exchange membrane electrolysis

Blade Wrap Angle Impact on Centrifugal Pump Performance:Entropy Generation and Fluid-Structure Interaction Analysis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computer Modeling in engineering & Sciences 2024年第7期140卷 109-137页

作者： Hayder Kareem Sakran Mohd Sharizal Abdul Aziz Chu Yee Khor School of Mechanical engineering Universiti Sains MalaysiaEngineering CampusNibong TebalPenang14300Malaysia Chemical engineering Department Faculty of EngineeringAl-Muthanna UniversityMuthanna66001Iraq faculty of Mechanical engineering&Technology Universiti Malaysia Perlis(UniMAP)ArauPerlis02600Malaysia

The centrifugal pump is a prevalent power equipment widely used in different engineering patterns,and the impeller blade wrap angle significantly impacts its performance.A numerical investigation was conducted to analyze the influence of the blade wrap angle on flow characteristics and energy distribution of a centrifugal pump evaluated as a low specific speed with a value of *** study investigates six impellermodels that possess varying blade wrap angles(95°,105°,115°,125°,135°,and 145°)that were created while maintaining the same volute and other geometrical *** investigation of energy loss was conducted to evaluate the values of total and entropy generation rates(TEG,EGR).The fluid-structure interaction was considered numerically using the software tools ANSYS Fluent and *** elastic structural dynamic equation was used to estimate the structural response,while the shear stress transport k–ωturbulence model was utilized for the fluid domain *** findings suggest that the blade wrap angle has a significant influence on the efficiency of the *** impeller featuring a blade wrap angle of 145°exhibits higher efficiency,with a notable increase of 3.76%relative to the original *** in the blade wrap angle impact the energy loss,shaft power,and pump *** model with a 145°angle exhibited a maximum equivalent stress of 14.8MPa and a total deformation of 0.084 *** results provide valuable insights into the intricate flow mechanism of the centrifugal pump,particularly when considering various blade wrap angles.

关键词： Centrifugal pump blade wrap angle entropy generation theory fluid-structure interaction hydraulic performance

An isogeometric approach for nonlocal bending and free oscillation of magneto-electro-elastic functionally graded nanobeam with elastic constraints

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil engineering 2024年第9期18卷 1401-1423页

作者： Thu Huong NGUYEN THI Van Ke TRAN Quoc Hoa PHAM School of Mechanical and Automotive engineering Hanoi University of IndustryHanoi 100000Vietnam faculty of Mechanical engineering Le Quy Don Technical UniversityHanoi 100000Vietnam faculty of engineering and Technology Nguyen Tat Thanh UniversityHo Chi Minh City 700000Vietnam

This work uses isogeometric analysis(IGA),which is based on nonlocal hypothesis and higher-order shear beam hypothesis,to investigate the static bending and free oscillation of a magneto-electro-elastic functionally graded(MEE-FG)nanobeam subject to elastic boundary constraints(BCs).The magneto-electric boundary condition and the Maxwell equation are used to calculate the variation of electric and magnetic potentials along the thickness direction of the *** study is innovative since it does not use the conventional boundary ***,an elastic system of straight and torsion springs with controllable stiffness is used to support nanobeams’beginning and end positions,creating customizable *** governing equations of motion of nanobeams are established by applying Hamilton’s principle and IGA is used to determine deflections and natural frequency *** studies were performed to evaluate the convergence and accuracy of the proposed *** from this,the impact of the input parameters on the static bending and free oscillation of the MEE-FG nanobeam is examined in *** findings could be valuable for analyzing and designing innovative structures constructed of functionally graded MEE materials.

关键词： elastic boundary conditions isogeometric analysis nanobeam via nonlocal theory grading of magneto-electro-elastic functions

Intelligent Fractional-Order Controller for SMES Systems in Renewable Energy-Based Microgrid

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computer Modeling in engineering & Sciences 2024年第8期140卷 1807-1830页

作者： Aadel M.Alatwi Abualkasim Bakeer Sherif A.Zaid Ibrahem E.Atawi Hani Albalawi Ahmed M.Kassem Electrical engineering Department Faculty of EngineeringUniversity of TabukTabuk47913Saudi Arabia Industrial Innovation and Robotic Center(IIRC) University of TabukTabuk47731Saudi Arabia Department of Electrical engineering Faculty of EngineeringAswan UniversityAswan81542Egypt Renewable Energy and Environmental Technology Centre University of TabukTabuk47913Saudi Arabia Electrical engineering Department Faculty of EngineeringSohag UniversitySohag82524Egypt

An autonomous microgrid that runs on renewable energy sources is presented in this *** has a supercon-ducting magnetic energy storage(SMES)device,wind energy-producing devices,and an energy storage ***,because such microgrids are nonlinear and the energy they create varies with time,controlling and managing the energy inside them is a difficult ***-order proportional integral(FOPI)controller is recommended for the current research to enhance a standalone microgrid’s energy management and *** suggested dedicated control for the SMES comprises two loops:the outer loop,which uses the FOPI to regulate the DC-link voltage,and the inner loop,responsible for regulating the SMES current,is constructed using the intelligent FOPI(iFOPI).The FOPI+iFOPI parameters are best developed using the dandelion optimizer(DO)approach to achieve the optimum *** suggested FOPI+iFOPI controller’s performance is contrasted with a conventional PI controller for variations in wind speed and microgrid *** optimal FOPI+iFOPI controller manages the voltage and frequency of the *** behavior of the microgrid as a reaction to step changes in load and wind speed was measured using the proposed *** simulations were used to evaluate the recommended system’s *** results of the simulations showed that throughout all interruptions,the recommended microgrid provided the load with AC power with a constant amplitude and *** addition,the required load demand was accurately ***,the microgrid functioned incredibly well despite SMES and varying wind *** obtained under identical conditions were compared with and without the best FOPI+iFOPI *** utilizing the optimal FOPI+iFOPI controller with SMES,it was found that the microgrid performed better than the microgrid without SMES.

关键词： Fractional-order proportional integral(FOPI) intelligent controller renewable energy resources superconducting magnetic energy storage optimization

Annual growth of Fagus orientalis is limited by spring drought conditions in Iran’s Golestan Province

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Forestry Research 2024年第1期35卷 128-142页

作者： Khalil Ghorbani Jahangir Mohammadi Laleh Rezaei Ghaleh Department of Water engineering Faculty of Water and Soil EngineeringGorgan University of Agricultural Sciences and Natural ResourcesGorganIran Department of Forestry Gorgan University of Agricultural Sciences and Natural ResourcesGorganIran Department of Water engineering Faculty of AgricultureUrmia UniversityUrmiaIran

Due to the lack of a uniform and accurate defi-nition of‘drought’,several indicators have been introduced based on different variables and methods,and the efficiency of each of these is determined according to their relationship with *** relationship between two drought indices,SPI(standardized precipitation index)and SPEI(standard-ized precipitation-evapotranspiration index)in different sea-sons was investigated using annual rings of 15 tree samples to determine the effect of drought on the growth of oriental beech(Fagus orientalis Lipsky)in the Hyrcanian forests of northern *** different evapotranspiration calcula-tion methods were evaluated on SPEI efficiency based on Hargreaves-Samani,Thornthwaite,and Penman-Monteith methods using the step-by-step M5 decision tree regression *** results show that SPEI based on the Penman-Monteith in a three-month time scale(spring)had similar temporal changes and a better relationship with annual tree rings(R^(2)=0.81)at a 0.05 significant *** change and a decreasing trend in the time series of annual tree rings are similar to the variation in the SPEI based on the Penman-Monteith *** affecting evapotranspiration,temperature,wind speed,and sunshine hours(used in the Penman-Monteith method),increased but precipitation *** non-linear modeling methods,SPEI based on Penman-Monteith best illustrated climate changes affecting tree growth.

关键词： Climate change Drought index Hyrcanian forests SPEI'Annual growth rings Fagus orientalis

Enhancing fault-clearing algorithm for renewable-energy-based distribution systems using artificial neural networks

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Clean Energy 2024年第5期8卷 97-116页

作者： Rania G.Mohamed M.A.Ebrahim Shady H.E.Abdel Aleem Electrical engineering Department Institute of Aviation Engineering and TechnologyGiza12658Egypt Electrical engineering Department Faculty of Engineering at ShoubraBenha UniversityCairo11629Egypt

Integrating small and large-scale photovoltaic(PV)solar systems into electrical distribution systems has become mandatory due to increased electricity bills and the concern for limiting greenhouse ***,the reliable and efficient operation of PV-based distribution systems can be confronted by the intermittence and high variability of solar sources and their consequential *** this regard,this article suggests a moderated fault-clearing strategy based on the incremental conductance–maximum power point tracking(IC–MPPT)technique and artificial neural networks(ANNs)to enhance fault detection,localization,and restoration pro-cesses in PV-based distribution *** proposed strategy leverages IC–MPPT to ensure optimal power generation from the PV solar system,even in the presence of *** tracking the maximum power point,the algorithm maintains the performance of the system and mitigates against the impact of faults on the output ***,an ANN is employed to improve fault detec-tion and localization *** developed ANN-based moderated fault-clearing strategy is trained using historical data and fault scenarios,enabling it to recognize fault patterns and make informed decisions through extensive simulations and comparisons with traditional fault-clearing *** accomplish this study,benchmarks in PV-based distribution systems are constructed and em-ployed using the MATLAB®/Simulink®software ***,to validate the efficacy of the developed ANN-based moderated fault-clearing strategy,a real case study of a 1-MW PV-based distribution system in an industrial field located in Giza governorate,Egypt,is tested and *** obtained results demonstrate the effectiveness of the IC–MPPT and ANN-based moderated fault-clearing strategy in achieving faster fault detection,precise fault localization,and efficient restoration in PV solar-based dis-tribution systems while preserving maximum power extraction under small and larg

关键词： photovoltaic solar systems fault-clearing algorithm incremental conductance renewable energy artificial neural network maximum power point tracking

Lap-Shear Performance of Weld-Bonded Mg Alloy and Austenitic Stainless Steel in Three-Sheet Stack-Up

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical engineering 2024年第4期37卷 342-353页

作者： Sunusi Marwana Manladan Mukhtar Fatihu Hamza Singh Ramesh Zhen Luo School of Materials Science and engineering Tianjin UniversityTianjin 300350China Department of Mechanical engineering Faculty of EngineeringBayero UniversityKano 3011Nigeria Department of Mechanical engineering College of EngineeringPrince Sattam bin Abdulaziz University11942 AlkharjSaudi Arabia Department of Mechanical engineering Faculty of EngineeringUniversity of Malaya50603 Kuala LumpurMalaysia

With the growing interest in utilizing Mg and austenitic stainless steel(ASS)in the automotive sector,joining them together in three-sheet configuration is ***,achieving this task presents considerable challenges due to the large differences in their physical,metallurgical and mechanical *** overcome these challenges,the feasibility of using weld-bonding to join Mg alloy/ASS/ASS was *** nugget formation,interface characteristics,microstructure and mechanical properties of the joints were *** results show that the connection between the Mg alloy and upper ASS was achieved through the combined effect of the cured adhesive and weld-brazing in the weld *** the other hand,a metallurgical bond was formed at the ASS/ASS *** Mg nugget microstructure exhibited fine columar grains composed predominantly of primaryα-Mg grains along with a eutectic mixture ofα-Mg andβ-*** nugget formed at the ASS/ASS interface consisted largely of columnar grains of austenite,with some equiaxed dendritic grains formed at the centerline of the *** weld-bonded joints exhibited an average peak load and energy absorption of about 8.5 kN and 17 J,respectively(the conventional RSW joints failed with minimal or no load application).The failure mode of the joints changed with increasing welding current from interfacial failure via the Mg nugget/upper ASS interface to partial interfacial failure(part of the Mg nugget was pulled out of the Mg sheet).Both failure modes were accompanied by cohesive failure in the adhesive zone.

关键词： Weld-bonding Resistance spot welding Austenitic stainless steel Mg alloy Failure mode

Optimal aeration management strategy for a small-scale food waste composting

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Carbon Resources Conversion 2024年第1期7卷 79-88页

作者： Jia Chi Lai Yi Lung Then Siaw San Hwang Chung Sien Lee School of engineering and Science Faculty of EngineeringComputing and ScienceSwinburne University of Technology93350 KuchingSarawakMalaysia Department of Electrical and Electronic engineering Faculty of EngineeringUniversiti Malaysia Sarawak94300 Kota SamarahanSarawakMalaysia

Food waste is a significant contributor to greenhouse gas emissions when it ends up in *** turns out to be a sustainable solution to this problem,but it requires controlled and continuous airflow for optimal *** study focused on the effect of aeration rates and airflow directions on food waste composting using a closed system with forced *** was entered into the composting vessel in three directions,which were upward,downward,and a combination of both *** direction was run at aeration rates of 0.1,0.4,and 0.7 L/*** findings showed that the compost pile aerated at 0.4 L/min by using two-directional airflow can reach the thermophilic temperature within half of the *** compost pile achieved temperature of 40.94℃ after 10.5 *** the compost experienced slightly high in moisture loss(4.3%),the compost still attained the standard values for *** compost produced from food waste could be applied in soil to improve its fertility.

关键词： Small-scale composting Two-directional airflow Intermittent aeration Food waste

Influence of curing conditions on the shrinkage behavior of three-dimensional printed concrete formwork

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil engineering 2024年第8期18卷 1225-1236页

作者： M.BEKAERT K.van TITTELBOOM G.de SCHUTTER Magnel-Vandepitte Laboratory for structural engineering and Building Materials Department of Structural Engineering and Building MaterialsFaculty of Engineering and ArchitectureGhent UniversityGhent 60 B-9052Belgium

The use of three-dimensional(3D)printed concrete as formwork is becoming more widely applied within the ***,the technology is still not optimized and there are many reports of preliminary cracking during the curing of cast *** is believed to result from differential shrinkage between the printed and cast *** cracks(in the printed concrete or at the interface between the infill and printed concrete)form a preferential path for aggressive substances and can reduce the durability of the combined concrete *** ensure the desired service life of the structure,it is important that the differential shrinkage between cast and printed concrete is *** study investigated the effect of curing conditions on the differential shrinkage behavior of 3D and cast *** influence of prewetting of the dry-cured 3D printed formwork was also *** the experimental program,a vibrated and self-compacting concrete were used as cast *** 3D printed formwork was produced and combined with cast concrete to simulate a concrete *** formwork was cured for 1,7,or 28 d exposed to the air(relative humidity:60%or 95%)or submerged in *** length change of the combined elements was observed over 56 d after concrete casting and throughout the thickness of the *** show that increasing the curing period in dry conditions of the printed concrete leads to an expansion of the formwork on the first day after *** expansion leads to a non-uniform strain evolution throughout the curing period of the combined *** concrete formwork stored in wet conditions does not expand after the casting process but tends to show a decreasing linear deformation within the whole elements.

关键词： 3D concrete printing formwork shrinkage curing