检索结果-南通市图书馆

Differential roles of seed and sprout regeneration in forest diversity and productivity after disturbance

forest Ecosystems 2024年第3期11卷 371-380页

作者： Marek Mejstrík Martin Svatek Martina Pollastrini Martin Sramek Radim Matula department of forest Ecology Faculty of Forestry and Wood SciencesCzech University of Life Sciences PragueKamýcka 12916500PragueCzech Republic department of forest Botany Dendrology and GeobiocoenologyFaculty of Forestry and Wood TechnologyMendel University in BrnoZemedelska 361300BrnoCzech Republic department of Agriculture FoodEnvironment and ForestryUniversity of FirenzePiazzale Delle Cascine 2850144FirenzeItaly

Natural regeneration after disturbances is a key phase of forest development,which determines the trajectory of successional changes in tree species composition and *** trees can originate from either seeds or sprouts produced by disturbed trees with sprouting *** both regeneration strategies often develop and co-occur after a disturbance,they tend to affect forest development differently due to significant functional ***,the origin of tree regeneration is rarely distinguished in post-disturbance forest surveys and ecological studies,and the differential roles of seed and sprout regeneration in forest productivity and diversity remain poorly *** address these research gaps,we explored the role of sprout and seed regeneration in the formation of woody species diversity and above-ground biomass(AGB)productivity in early-stage forest *** were collected in two experimental forest stands in the Czech Republic,where trees were cut with varying intensities with the density of residual(uncut)trees ranging from 0 to 275 trees per *** trees were mapped and their sizes were measured before cutting and then,either as a stump with sprouts or a residual tree,remeasured 11 years *** addition,all tree saplings were mapped and measured 11 years after logging,and their origin(sprout or seed)was *** assess abundances and productivity,we estimated AGB of all2,685 sprouting stumps of 19 woody species and 504 generative(i.e.,seed origin)individuals of 16 woody species,using allometric ***-effects models were used to analyze the effects of each regeneration strategy on woody species diversity and the total AGB under varying densities of residual *** multidimensional scaling was used to evaluate the effect of regeneration strategies on species *** and diversity of sprouts were significantly higher than those of seed *** formed on average97.1%of

关键词： Resprouting Seeding Residual trees Tree diversity Above-ground biomass

来源：

维普期刊数据库

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Is there hybridization between 2 species of the same genus in sympatry?——The genetic relationships between Anoplophora glabripennis,Anoplophora chinensis,and putative hybrids

引用

Insect Science 2024年第2期31卷 633-645页

作者： Haiwen Qin Huachao Xu Arnaud Capron Ilga Porth Mingming Cui Melody A.Keena Xiaofang Deng Juan Shi Richard C.Hamelin Sino-French Joint Laboratory for Invasive forest Pests in Eurasia Department of ForestBejing Forestry UniversityBejingChina department of forest and Conservation sciences The University of British ColumbiaVancouverCanada College of forestry and Biotechnology Zhejiang A&F UniversityHangzhouChina department of wood and forest sciences Laval UniversityQuebecCanada 5 Department of AgricultureNorthern Research StationUSDA Forest ServiceHamdenConnecticutUSA Changchun Landscape Plant Conservation Station Bureau of Forestry and Landscaping of ChangchunChangchunChina

Anoplophora glabripennis(Asian longhorn beetle,ALB)and Anoplophora chinensis(Citrus longhorn beetle,CLB)are native forest pests in China;they have become important international quarantine *** are found using the same Salix aureopendula host tree of Cixi,Zhejiang province,*** this host tree,we collected additional beetles that appeared to be morphologically intermediate between ALB and *** using a stereoscope,we observed that there were several bumps on the base of the elytra,which was inconsistent with ALB,which typically has a smooth elytral base,but was more like CLB,which has numerous short tubercles on the elytral *** their sympatry and intermediate morphology,we hypothesized that these may represent ALB×CLB *** studied the genomic profiles for 46 samples(ALB,CLB,and putative hybrids)using genotyping-by-sequencing(GBS)providing a reduced representation of the entire *** principal component analyses on the 163 GBS-derived single nucleotide polymorphism data,we found putative hybrids tightly clustered with ALB,but genetically distinct from the CLB ***,our initial hybrid hypothesis was not supported by genomic ***,while mating experiments between adult ALB and CLB were successful in 4 separate years(2017,2018,2020,and 2021),and oviposition behavior was observed,no progeny was *** employed population genomic analysis and biological hybridization experiments,we conclude that the putative hybrids represent newly discovered morphological variants within *** approach further confirmed the advantage of genome-wide information for Anoplophora species assignment in certain ambiguous classification cases.

关键词： Anoplophora chinensis Anoplophora glabripenni sg enotyping-bysequencing invasive pest mating putative hybrid

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Assessment of large-scale multiple forest disturbance susceptibilities with AutoML framework: an Izmir Regional forest Directorate case

引用

Journal of forestry Research 2024年第4期35卷 73-88页

作者： Remzi Eker Kamber Can Alkiş Abdurrahim Aydın department of forest engineering Faculty of ForestryIzmir KatipÇelebi University35620 IzmirTurkey Graduate School of Natural and Applied sciences Izmir KatipÇelebi University35620 IzmirTurkey department of forest engineering Faculty of ForestryDüzce University81620 DüzceTurkey

Disturbances such as forest fires,intense winds,and insect damage exert strong impacts on forest ecosystems by shaping their structure and growth dynamics,with contributions from climate ***,there is a need for reliable and operational methods to monitor and map these disturbances for the development of suitable management *** susceptibility assessment using machine learning methods has increased,most studies have focused on a single ***,there has been limited exploration of the use of“Automated Machine Learning(AutoML)”in the *** this study,susceptibility assessment for multiple forest disturbances(fires,insect damage,and wind damage)was conducted using the PyCaret AutoML framework in the Izmir Regional forest Directorate(RFD)in *** AutoML framework compared 14 machine learning algorithms and ranked the best models based on AUC(area under the curve)*** extra tree classifier(ET)algorithm was selected for modeling the susceptibility of each disturbance due to its good performance(AUC values>0.98).The study evaluated susceptibilities for both individual and multiple disturbances,creating a total of four susceptibility maps using fifteen driving factors in the *** to the results,82.5%of forested areas in the Izmir RFD are susceptible to multiple disturbances at high and very high ***,a potential forest disturbances map was created,revealing that 15.6%of forested areas in the Izmir RFD may experience no damage from the disturbances considered,while 54.2%could face damage from all three *** SHAP(Shapley Additive exPlanations)methodology was applied to evaluate the importance of features on prediction and the nonlinear relationship between explanatory features and susceptibility to disturbance.

关键词： AutoML forest disturbances forest fire Insect Susceptibility Wind

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Matrix Assisted Laser Desorption Ionization Time of Flight(MALDI-TOF)-Mass Spectrometry and^(13)C-NMR-Identified New Compounds in Paraberlinia bifoliolata(Ekop-Beli)Bark Tannins

引用

Journal of Renewable Materials 2024年第3期12卷 553-568页

作者： Liliane Nga Benoit Ndiwe Achille Bernard Biwolé Antonio Pizzi Jean Jalin Eyinga Biwole Joseph Zobo Mfomo Laboratory of forest Resources and wood Valorization Training Unit in Engineering SciencesPost Graduate School of Fundamental and Applied SciencesUniversity of DoualaP.O.Box 1872DoualaCameroun Laboratory of Mechanics Training Unit in Engineering SciencesPost Graduate School of Fundamental and Applied SciencesUniversity of DoualaP.O.Box 2701DoualaCameroun Laboratory of Studies and Research on wood Material(LERMAB) University of LorraineNancyFrance

Extracts of plant origin,particularly tannins,are attracting growing interest for the sustainable development of materials in the industrial *** discovery of new tannins is therefore *** aim of this work was to contribute to the understanding of the properties of Paraberlinia bifoliolata tannin by Matrix Assisted Laser Desorption Ionization Time of Flight Mass Spectroscopy MALDI-TOF/MS and Carbon 13 Nuclear Magnetic Resonance(13C NMR).The chemical composition of tannin extracted from Paraberlinia bifoliolata bark was determined,as was the mechanical strength of the resin hardened with Acacia nilotica *** by successive water extraction was 35%.MALDI-TOF/MS analysis revealed the presence of three new compounds in this tannin,previously unknown in this family of *** are 3-hydroxyproline acid,N-methyl-4-hydroxypipecolic acid and N-methyl-5-dihydroxypipecolic *** identification of the above molecules means that this tannin can be used for industrial applications,as a resin in the manufacture of particleboard and in the formulation of green corrosion *** information is reinforced by 13C NMR spectrometry,which indicates the presence of several polyflavonoid units,confirming the condensed nature of the *** analysis of the resin formed by the purified tannin of Paraberlinia bifoliolata to which a vegetal biohardener has been added provided a Modulus of Elasticity(MOE)value of 4840 MPa at 150℃,confirming its possible use as a binder resin in the manufacture of wood panels as well as for the formulation of a corrosion inhibitor.

关键词： Tannin Paraberlinia bifoliolata Central African wood species MALDI-TOF/MS 13C NMR bark extracts thermomechanical behaviour wood-binder

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Relating estimates of wood properties of birch to stem form, age and species

引用

Journal of forestry Research 2024年第3期35卷 1-11页

作者： Grace Jones Maria Ulan Mateusz Liziniewicz Johan Lindeberg Stergios Adamopoulos Teagasc forestry Development department Ashtown Research CentreDublin 15 D15DY05Ireland Research Institutes of Sweden(RISE) GoteborgSweden The forest Research Institute of Sweden(Skogforsk) Ekebo 225026890SvalovSweden department of forestry and wood Technology Linnaeus University35195VaxjoSweden department of forest Biomaterials and Technology Swedish University of Agricultural SciencesBox 700875007 UppsalaSweden

Birch has long suffered from a lack of active forest management,leading many researchers to use mate-rial without a detailed management *** collected from three birch(Betula pendula Roth,*** Ehrh.)sites in southern Sweden were analyzed using regression analysis to detect any trends or differences in wood proper-ties that could be explained by stand history,tree age and stem *** sites were genetics trials established in the same *** of acoustic velocity(AV)from non-destructive testing(NDT)and predicted AV had a higher correlation if data was pooled across sites and other stem form factors were considered.A subsample of stems had radial profiles of X-ray wood density and ring width by year created,and wood density was related to ring number from the pith and ring *** seemed likely that wood density was negatively related to ring width for both birch *** models had slight improvements if site and species were included,but only the youngest site with trees at age 15 had both birch *** paper indicated that NDT values need to be considered separately,and any predictive models will likely be improved if they are specific to the site and birch species measured.

关键词： Acoustic velocity Non-destructive testing Predictive models Regression analysis wood density

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Evaluation of Mechanical Properties and Surface Quality of wood from Bosnia and Herzegovina Exposed to Outdoor Conditions

引用

Journal of Renewable Materials 2024年第8期12卷 1417-1431页

作者： Hasanagić R. Šljivo U. Fathi L. Gautam P. Bahmani M. Humar M. department of wood Science and Technology Faculty of Technical Engineering University of Bihać Bihać 77000 Bosnia and Herzegovina department of wood and Furniture Industry engineering Faculty of Resources and Earth Science Shahrekord University Shahrekord 64165478 Iran department of Botany Institute of Science Banaras Hindu University Uttar Pradesh Varanasi 221005 India Biotechnical Faculty Department of Wood Science University of Ljubljana Ljubljana 1501 Slovenia

This study investigated the mechanical properties of beech (Fagus sylvatica L.) and fir (Abies alba) wood from Bosnia and Herzegovina under outdoor exposure. Samples were exposed for 3-month exposure to assess bending strength, color changes, and surface quality. Results showed outdoor exposure negatively affected mechanical properties, particularly in samples with extended finger joints, causing significant surface cracks in uncoated sam-ples. Beech wood exhibited notable color changes under exposure, with approximately 50% darkening without coating compared to 25% under covered conditions. Coated samples displayed minimal color changes, affirming the efficacy of surface treatment. Fir wood exhibited a roughness of 8.264 μm, while beechwood average roughness increased from 6.767 to 13.916 μm after exposure, with micro-pore development affecting water perfor-mance. Microscopic analysis identified prevalent fungal colonies, including Penicillium, Aureobasidium, Sclerophoma, and Chaetomium, underscoring their role in organic matter decomposition. This study highlights the importance of wood exposure and treatment selection for various applications. © 2024 The Authors.

关键词： cracks Mechanical properties outdoor conditions wood species

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Challenges and opportunities in the production of magnesium parts by directed energy deposition processes

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1663-1686页

作者： Gürel Cam Ali Günen Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Mechanical Engineering31200 Iskenderun-HatayTurkey Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Metallurgy and Materials Engineering31200 Iskenderun-HatayTurkey

Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight,high specific strength,and corrosion resistance,making them attractive for applications in medical,aerospace,automotive,and other transport ***,their widespread application is hindered by their low formability at room temperature due to limited slip *** Mg-alloys have low mechanical properties due to the presence of casting defects such as porosity and anisotropy in addition to the high *** casting methods benefit from established process optimization techniques for these problems,additive manufacturing methods are increasingly replacing casting methods in Mg alloys as they provide more precise control over the microstructure and allow specific grain orientations,potentially enabling easier optimization of anisotropy properties in certain *** metal additive manufacturing(MAM)technology also results in some manufacturing defects such as inhomogeneous microstructural evolution and porosity and additively manufactured Mg alloy parts exhibit lower properties than the wrought parts,they in general exhibit superior properties than the cast ***,MAM is a promising technique to produce Mg alloy *** energy deposition processes,particularly wire arc directed energy deposition(WA-DED),have emerged as an advantageous additive manufacturing(AM)technique for metallic materials including magnesium alloys,offering advantages such as high deposition rates,improved material efficiency,and reduced production costs compared to subtractive ***,the inherent challenges associated with magnesium,such as its high reactivity and susceptibility to oxidation,pose unique hurdles in the application of this *** review paper delves into the progress made in the application of DED technology to Mg-alloys,its challenges,and ***,the predominant imperfections,notably inhomo

关键词： Additive manufacturing DED processes Arc-DED Wire arc additive manufacturing(WAAM) 3-D printing High deposition rate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Grouping tree species to estimate basal area increment in temperate multispecies forests in Durango,Mexico

引用

forest Ecosystems 2024年第1期11卷 1-13页

作者： Jaime Roberto Padilla-Martínez Carola Paul Kai Husmann Jose Javier Corral-Rivas Klaus von Gadow department of forest Economics and Sustainable Land-use Planning Faculty of Forest Sciences and Forest EcologyUniversity of GottingenBüsgenweg 137077GottingenGermany Facultad de Ciencias forestales Universidad Juarez del Estado de DurangoRío Papaloapan y Boulevard Durango S/N34120DurangoMexico Faculty of forestry and forest Ecology Georg-August-UniversitatBüsgenweg 537077GottingenGermany department of forestry and wood Science Faculty of AgriSciencesStellenbosch UniversityStellenbosch Private Bag X1Stellenbosch7602South Africa

Multispecies forests have received increased scientific attention,driven by the hypothesis that biodiversity improves ecological ***,a greater species diversity presents challenges for forest management and *** study aims to develop basal area growth models for tree species *** analysis is based on a dataset of 423 permanent plots(2,500 m^(2))located in temperate forests in Durango,***,we define tree species cohorts based on individual and neighborhood-based variables using a combination of principal component and cluster ***,we estimate the basal area increment of each cohort through the generalized additive model to describe the effect of tree size,competition,stand density and site *** principal component and cluster analyses assign a total of 37 tree species to eight cohorts that differed primarily with regard to the distribution of tree size and vertical position within the *** generalized additive models provide satisfactory estimates of tree growth for the species cohorts,explaining between 19 and 53 percent of the total variation of basal area increment,and highlight the following results:i)most cohorts show a"rise-and-fall"effect of tree size on tree growth;ii)surprisingly,the competition index"basal area of larger trees"had showed a positive effect in four of the eight cohorts;iii)stand density had a negative effect on basal area increment,though the effect was minor in medium-and high-density stands,and iv)basal area growth was positively correlated with site quality except for an oak *** developed species cohorts and growth models provide insight into their particular ecological features and growth patterns that may support the development of sustainable management strategies for temperate multispecies forests.

关键词： Temperate multispecies forests Cluster analysis Basal area increment Generalized additive models

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Thermo-Mechanical, Physico-Chemical, Morphological, and Fire Characteristics of Eco-Friendly Particleboard Manufactured with Phosphorylated Lignin Addition

引用

Journal of Renewable Materials 2024年第7期12卷 1311-1341页

作者： Apri Heri Iswanto Harisyah Manurung Asma Sohail Lee Seng Hua Petar Antov Deded Sarip Nawawi Sarah Latifah Dewi Shafa Kayla Sukma Surya Kusumah Muhammad Adly Rahandi Lubis Linda MakovickáOsvaldová MohdHazwan Hussin Rangabhashiyam Selvasembian Lum Wei Chen Puji Rahmawati Nurcahyani Nam Hun Kim Widya Fatriasari department of forest Products Faculty of ForestryUniversitas Sumatera UtaraKampus USU Padang BulanMedanNorth Sumatra20155Indonesia department of Chemistry Lahore College for Women UniversityLahore4444Pakistan department of wood Industry Faculty of Applied SciencesUniversiti Teknologi MARA(UiTM)Cawangan Pahang Kampus JengkaShah Alam26400Malaysia Faculty of forest Industry University of ForestrySofia1797Bulgaria department of forest Product Faculty of Forestry and EnvironmentIPB UniversityBogor16680Indonesia Research Center for Biomass and Bioproducts National Research and Innovation Agency(BRIN)Cibinong16911Indonesia department of forest engineering Faculty of Security EngineeringUniversity of ZilinaZilina01001Slovakia Materials Technology Research Group(MaTReC) School of Chemical SciencesUniversiti SainsMalaysiaMindenPenang11800Malaysia department of Environmental Science and engineering School of Engineering and SciencesSRM University-APAmaravatiAndhra Pradesh522240India department of Bio and Natural Resources Faculty of Bioengineering and TechnologyUniversitiMalaysia KelantanJeliKelantan17600Malaysia department of forest Biomaterials engineering College of Forest and Environmental SciencesKangwon National UniversityChuncheon24341Republic of Korea

Lignin,lignosulfonate,and synthesized phosphorylated lignosulfonate were introduced as greenﬁllers in citric acid-sucrose adhesives for bonding particleboard fabricated from areca leaf sheath(ALS).The characteristics of particleboards were compared to that of ultralow emitting formaldehyde(ULEF-UF).Theﬁllers derived from Eucalyptus ***-lignin were added forﬂame retardancy enhancement.10%of each lignin and modiﬁed lig-nin was added into the ULEF-UF and citric acid-sucrose bonded *** applied to particle-boards included thermal characteristics,X-ray diffraction analysis(XRD),morphological properties,Fourier transform infrared spectroscopy(FTIR),as well as physical,mechanical,andﬁre resistance characteristics of the laboratory-fabricated *** and modiﬁed lignin resulted in improved thermal stability of the composites bonded with ULEF-UF while the improvement in the particleboard bonded with citric acid-sucrose was not signiﬁ*** introduction ofﬁller exerted a higher inﬂuence on the UF-bonded particleboards compared to composites fabricated with citric ***,the presence of lignin,lignosulfonate,and phosphorylated lignosulfonate enhanced the mechanical strength of the ULEF-bonded particleboards,although their dimensional stability has ***,the use of lignin and lignosulfonate enhanced theﬁre resis-tance of the particleboards produced with lower observed weight *** laboratory particleboards exhibited satisfactoryﬁre resistance,attaining a V-0 rating in according to the UL-94 standard.

关键词： Modiﬁed lignin eco-friendly particleboard ﬁre and thermal properties citric acid-sucrose ultralow-emitting urea-formaldehyde resin

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tree species identity and interaction determine vertical forest structure in young planted forests measured by terrestrial laser scanning

引用

forest Ecosystems 2024年第3期11卷 266-275页

作者： Mengxi Wang Lander Baeten Frieke Van Coillie Kim Calders Kris Verheyen Quentin Ponette Haben Blondeel Bart Muys John Armston Hans Verbeeck Q-forestLab Department of EnvironmentFaculty of Bioscience EngineeringGhent UniversityBelgium forest&Nature Lab Department of EnvironmentFaculty of Bioscience EngineeringGhent UniversityBelgium Earth and Life Institute Université Catholique de Louvain(UCLouvain)Louvain-la-NeuveBelgium department of Earth&Environmental sciences KU LeuvenBelgium department of Geographical sciences University of MarylandCollege ParkMDUSA

Vertical forest structure is closely linked to multiple ecosystem characteristics,such as biodiversity,habitat,and *** tree species in planted forests has the potential to create diverse vertical forest structures due to the different physiological and morphological traits of the composing tree ***,the relative importance of species richness,species identity and species interactions for the variation in vertical forest structure remains unclear,mainly because traditional forest inventories do not observe vertical stand structure in *** laser scanning(TLS),however,allows to study vertical forest structure in an unprecedented ***,we used TLS single scan data from 126 plots across three experimental planted forests of a largescale tree diversity experiment in Belgium to study the drivers of vertical forest *** plots were 9–11years old young pure and mixed forests,characterized by four levels of tree species richness ranging from monocultures to four-species mixtures,across twenty composition *** generated vertical plant profiles from the TLS data and derived six stand structural *** mixed models were used to test the effect of species richness on structural *** a hierarchical diversity interaction modelling framework,we further assessed species identity effect and various species interaction effects on the six stand structural *** results showed that species richness did not significantly influence most of the stand structure variables,except for canopy height and foliage height *** identity on the other hand exhibited a significant impact on vertical forest structure across all *** interaction effects were observed to be site-dependent due to varying site conditions and species pools,and rapidly growing tree species tend to dominate these ***,our results highlighted the importance of considering both species identity an

关键词： TreeDivNet FORBIO Stand structural complexity Terrestrial laser scanning Vertical forest structure Tree diversity Planted forests

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：