检索结果-南通市图书馆

Strengthening effect of prefabrication(10-12)tensile twinning on AZ80+0.4%Ce magnesium alloy and inhibition mechanism of discontinuous precipitation

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1918-1930页

作者： Zhen Wang Xi Zhao Zhimin Zhang Yaojin Wu Kai Chen Xianwei Ren Dengkui Wang Wei Wang School of Mechanical and Electrical engineering North University of ChinaTaiyuan 030051China engineering Technology Research Center for Integrated precision Forming of Shanxi Province North University of ChinaTaiyuan 030051China

This paper provided an effective method to further improve the mechanical properties of the AZ80+0.4%Ce magnesium alloy wheel *** effect of high strength and ductility was obtained with a yield strength of 295.36 MPa,an elongation of 10%,by the combination of pre-deformation(7%deformation)and two-stage aging treatment(120℃/9 h+175℃/24 h).The evolution of the microstructure and properties of the alloy was explored under the coupling conditions of different pre-deformation degrees and multi-stage *** results show that,pre-deformation introduced a large number of(1012)tensile twinning and dislocations,which greatly promoted the probability of continuous precipitates(CPs)*** the contrary,the discontinuous precipitates(DPs)were limited by the vertical and horizontal twin *** a result,the pre-nucleation method of two-stage aging increased the proportion of CPs by 34%-38%.Owing to the DPs was effectively suppressed,the alloy's yield strength has been greatly ***,under multi-stage aging,the twin boundaries induce protruding nucleation to form static recrystallization by hindering the migration of dislocations,and the matrix swallows the twins,then the texture gradually tilts from the two poles to the basal *** an important supplement,the grain refinement and oblique texture promoted the improvement of the yield strength of the component.

关键词： Magnesium alloy Pre-deformed Two-stage aging Tensile twinning Continuous precipitates Texture

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The Active Compensation Technique for Large Reflector Antennas Based on Quadratic Curve Fitting

引用

Research in Astronomy and Astrophysics 2024年第7期24卷 226-234页

作者： Tian-Xiang Zheng Bin-Bin Xiang Han-Wei Cui Wei Wang Pei-Yuan Lian Shang-Ming Lin Yang Zhang Jian-Ping Zhou Kai Li School of Mechanical engineering Xinjiang UniversityUrumqi 830017China School of Mechano-Electronic engineering Xidian UniversityXi’an 710017China Xi’an institute of Optics and precision Mechanics Chinese Academy of SciencesXi’an 710119China

Active reflectors are often used to compensate the surface distortion caused by environmental factors that degrade the electromagnetic performance of large high-frequency reflector *** is crucial for maintaining high gain operation in antennas.A distortion compensation method for the active reflector of a large dual-reflector antenna is proposed.A relationship is established between the surface deformation and the optical path difference for the primary reflector by geometric ***,employing finite element analysis,a polynomial fitting approach is used to describe the impact of adjusting points on the reflector surface based on the coordinates of each *** standardizing the positions of various panels on the reflector,the fitting ns can be applied to the reflector panels of similar ***,based on the distribution characteristics of the primary reflector panels,the adjustment equation for the actuators is derived by the influence matrix *** can be used to determine the adjustment amount of actuators to reduce the rms of the optical path ***,the least squares method is employed to resolve the matrix *** example of a 110 m aperture dual-reflector antenna is carried out by finite element analysis and the proposed *** results show that the optical path difference is reduced significantly at various elevation cases,which indicates that the proposed method is effective.

关键词： Methods analytical-Methods numerical-Telescopes

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Converting an O-vacancy-rich oxide into a multifunctional separator modifier for long-lifespan lithium metal batteries

引用

Journal of Energy Chemistry 2024年第10期97卷 371-378页

作者： Juntao Si Xiaoying Li Yixuan Li Kuo Cao Yiran Zhu Chunhua Chen CAS Key Laboratory of precision and Intelligent Chemistry Department of Materials Science and Engineering University of Science and Technology of China

The lithium metal anode is hailed as the desired "holy grail" for the forthcoming generation of highenergy-density batteries,given its astounding theoretical capacity and low ***,the formation and growth of dendrites seriously compromise battery life and ***,an yttriastabilized bismuth oxide（YSB） layer is fabricated on the polypropylene（PP） separator,where YSB reacts with Li anode in-situ in the cell to form a multi-component composite interlayer consisting of Li3Bi,Li2O,and *** interlayer can function not only as a redistributor to regulate Li+distribution but also as an anion adsorber to increase the Li+transference number from 0.37 to 0.79 for suppressing dendrite nucleation and ***,compared with the cell with a baseline separator,those with modified separators exhibit prolonged lifespan in both Li/Li symmetrical cells and Li/Cu ***,the full cells coupled with ultrahigh-loading LiFePO4display an excellent cycling performance of 1700 cycles with a high capacity retention of ～80% at 1 C,exhibiting great potential for practical *** work provides a feasible and effective new strategy for separator modification towards building a much-anticipated dendrite-free Li anode and realizing long-lifespan lithium metal batteries.

关键词： Conversion-alloying reaction Dendrite-free Lithium metal battery Multifunctional interlayer Separator

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Smoothed particle hydrodynamics based numerical study of hydroplaning considering permeability characteristics of runway surface

引用

Frontiers of Structural and Civil engineering 2024年第3期18卷 319-333页

作者： Yang YANG Xingyi ZHU Denis JELAGIN Alvaro GUARIN Key Laboratory of Road and Traffic engineering of Ministry of Education Tongji UniversityShanghai 200092China Auto engineering Research institute BYD Auto Industry Company LimitedShenzhen 518118China Department of Civil and Architectural engineering KTH Royal Institute of TechnologyStockholm 10044Sweden

The presence of water films on a runway surface presents a risk to the landing of *** tire of the aircraft is separated from the runway due to a hydrodynamic force exerted through the water film,a phenomenon called *** a lot of numerical investigations into hydroplaning have been conducted,only a few have considered the impact of the runway ***,computational problems,such as excessive distortion and computing efficiency decay,may arise with such numerical models when dealing with the thin water *** paper presents a numerical model comprising of the tire,water film,and the interaction with the runway,applying a mathematical model using the smoothed particle hydrodynamics and finite element(SPH-FE)*** material properties and geometric features of the tire model were included in the model framework and water film thicknesses from 0.75 mm to 7.5 mm were used in the numerical ***,this work investigated the impacts of both surface texture and the runway *** interaction between tire rubber and the rough runway was analyzed in terms of frictional force between the two *** SPH-FE model was validated with an empirical equation proposed by the National Aeronautics and Space Administration(NASA).Then the computational efficiency of the model was compared with the traditional coupled Eulerian-Lagrangian(CEL)*** on the SPH-FE model,four types of the runway(Flat,SMA-13,AC-13,and OGFC-13)were *** simulation of the asphalt runway shows that the SMA-13,AC-13,and OGFC-13 do not present a hydroplaning risk when the runway permeability coefficient exceeds 6%.

关键词： SPH-FE approach hydroplaning numerical simulation surface texture runway surface reconstruction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Performance and enhanced oil recovery efficiency of an acid-resistant polymer microspheres of anti-CO2 channeling in low-permeability reservoirs

引用

Petroleum Science 2024年第4期21卷 2420-2432页

作者： Hai-Zhuang Jiang Hong-Bin Yang Ruo-Sheng Pan Zhen-Yu Ren Wan-Li Kang Jun-Yi Zhang Shi-Long Pan Bauyrzhan Sarsenbekuly State Key Laboratory of Deep Oil and Gas China University of Petroleum (East China) School of Petroleum engineering China University of Petroleum (East China) Oil and Gas engineering Research institute School of Energy and Petroleum industry Kazakh-British Technical University

CO2flooding is a vital development method for enhanced oil recovery in low-permeability reservoirs,However,micro-fractures are developed in low-permeability reservoirs,which are essential oil flow channels but can also cause severe CO2gas channeling ***,anti-gas channeling is a necessary measure to improve the effect of *** kind of anti-gas channeling refers to the plugging of fractures in the deep formation to prevent CO2gas channeling,which is different from the wellbore *** microspheres have the characteristics of controllable deep plugging,which can achieve the profile control of low-permeability fractured *** acidic environments with supercritical CO2,traditional polymer microspheres have poor expandability and plugging *** on previous work,a systematic evaluation of the expansion performance,dispersion rheological properties,stability,deep migration,anti-CO2channeling and enhanced oil recovery ability of a novel acid-resistant polymer microsphere（DCNPM-A） was carried out under CQ oilifield conditions（salinity of85,000 mg/L,80℃,pH=3）.The results show that the DCNPM-A microsphere had a better expansion performance than the traditional microsphere,with a swelling rate of *** microsphere dispersion with a concentration of 0.1%-0.5% had the advantages of low viscosity,high dispersion and good injectability in the low permeability fractured *** the acidic environment of supercritical CO2,DCNPM-A microspheres showed excellent stability and could maintain strength for over 60 d with less *** core experiments,DCNPM-A microspheres exhibited delayed swelling characteristics and could effectively plug deep *** a plugging rate of 95%,the subsequent enhanced oil recovery of CO2flooding could reach 21.03%.The experimental results can provide a theoretical basis for anti-CO2channeling and enhanced oil recovery in low-permeability fractured reservoirs.

关键词： Low-permeability reservoir Anti-CO 2 channeling Polymer microsphere Acid resistance

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Broadband absorption performance of 3D-printed polyetheretherketone-based electromagnetic wave-absorbing composites

引用

Chinese Journal of Aeronautics 2024年第8期37卷 547-558页

作者： Lin BAI Nan CHANG Meiying ZHAO Chi HOU Yi CAO Dichen LI School of Aeronautics Northwestern Polytechnical UniversityXi’an 710072China Chengdu aircraft Design and Research institute Chengdu 610091China Xi’an Key Laboratory of Advanced Structure Design and Application of aircraft Northwestern Polytechnical UniversityXi’an 710072China State Key Laboratory for Manufacturing System engineering Xi’an Jiaotong UniversityXi’an 710054China

The rapid development of additive manufacturing technology has offered a new avenue for designing and fabricating high wave-absorbing meta *** this study,the mechanical properties and broadband absorption performance of Poly-Ether-Ether-Ketone(PEEK)–based electromagnetic wave–absorbing composite materials was *** high-performance polymer PEEK was used as the matrix,and the materials with electromagnetic wave loss,such as reduced graphene oxide,Carbonyl Iron(CI),and Flake CI(FCI),were used as *** on the theory of impedance matching,a wave-absorbing structure with a gradual impedance gradient was designed and *** test results showed that at the 2.0–18.0 GHz frequency band,the coverage rate of the effective absorption bandwidth was up to 72.0%,the average optimal reflectivity was–18.09 dB,and the wide-angle absorption range was 0°–30°.The advantages of additive manufacturing technology in designing and fabricating wave-absorbing structures are presented,demonstrating that the technology is an effective method for creating broadband absorbing structures.

关键词： Absorption performance Additive manufacturing Electromagnetic absorption PEEK composite materials Gradual structure Broadband absorption

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Design and validation of a variable camber wing structure

引用

Chinese Journal of Aeronautics 2024年第2期37卷 1-11页

作者： Xiasheng SUN Jingfeng XUE Jin ZHOU Zhigang WANG Wenjuan WANG Mengjie ZHANG Chinese Aeronautical Establishment Beijing 100012China School of Aeronautic Science and engineering Beihang UniversityBeijing 100191China aircraft Strength Research institute of china Xi’an 710065China Graduate School of Chinese Aeronautical Establishment Yangzhou 225002China

Variable camber wing technology is one of the important development trends of green aviation at *** smooth,seamless,continuous and adaptive change of wing camber,the aerodynamic performance is improved in achieving increase in lift and reduction in resistance and *** on the aerodynamic validation model CAE-AVM,Chinese Aeronautical Establishment(CAE)has carried out the design and validation of a variable camber wing,proposed an aerodynamic deformation matrix for the leading and trailing edges of aircraft wings in takeoff,landing and cruise *** structures and driving schemes are compared,and several key technology problems of leading and trailing edge deformation are solved.A full-size leading edge wind tunnel test piece with a span of 2.7 m and a trailing edge ground function test piece are *** deformation and shape maintenance capabilities of the leading edge is verified under real wind load conditions,and the load bearing and deformation capabilities of the trailing edge is verified under simulated follow-on *** results indicate that the leading and trailing edges of the variable camber wing can achieve the required deformation angle and have a certain load-bearing *** study can provide some insights into the application of variable camber wing technology for civil aircraft.

关键词： Variable camber wing Leading edge Trailing edge Structure Measurement and control Test

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhancement of comprehensive properties of Nb–Si based in-situ composites by Ho rare earth doping

引用

Rare Metals 2024年第9期43卷 4508-4520页

作者： Wei Wei Qi Wang Rui-Run Chen Chao-Wen Zheng Yan-Qing Su National Key Laboratory for precision Hot Processing of Metals School of Materials Science and EngineeringHarbin Institute of Technology

This study examines the microstructure,mechanical properties （with a focus on room-temperature toughness）, and oxidation resistance of Ho-doped NbDSi based in-situ composites. The base alloy consists of the coarse primary Nb5Si3phase and the Nb5Si3+Nbss （Nb solid solution） eutectic cells. Ho doping influences the solidification path. When the Ho doping is higher than0.2 at%, the alloys transform into eutectic alloys. Ho can be solid-solved in trace amounts in the Nbss phase. However, most of Ho forms a stable Ho oxide phase, which alleviates oxygen contamination problem to some ***, the interface separation between Ho oxide and other phases reduces the plastic deformation ***, with 0.4 at%Ho doping, the KQvalue is18.03 MPa·m1/2, which is 31.1%higher than that of the base alloy. The strength of the Ho-doped alloys does not deteriorate with an increase in toughness. However, the large network-like Ho2O3in the 0.8Ho alloy causes a decrease in toughness and strength. In addition, the Ho oxide phase effectively blocks the inward oxygen *** 0.8 at%Ho doping, the oxidation mass gain per unit area is 10.16 mg·cm2, which is 39.7%lower than that of the base alloy.

关键词： Ho Microstructure Nb–Si based composites Properties Rare earth elements

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Spatial light modulation for femtosecond laser manufacturing:Current developments and challenges

引用

Science china(Technological Sciences) 2024年第1期67卷 60-72页

作者： ZANG Xue LIU ZiTing XU YiShi WANG Yi WANG Qing LI ZhenZe WANG Lei State Key Laboratory of Integrated Optoelectronics College of Electronic Science and EngineeringJilin UniversityChangchun 130012China State Key Laboratory of precision Measurement and Instruments Department of Precision InstrumentTsinghua UniversityBeijing 100084China

Since the invention of lasers,spatial-light-modulated laser processing has become a powerful tool for various *** enables multidimensional and dynamic modulation of the laser beam,which significantly improves the processing efficiency,accuracy,and flexibility,and presents wider prospects over traditional mechanical technologies for machining three-dimensional,hard,brittle,or transparent *** this review,we introduce:(1)The role of spatial light modulation technology in the development of femtosecond laser manufacturing;(2)the structured light generated by spatial light modulation and its generation methods;and(3)representative applications of spatial-light-modulated femtosecond laser manufacturing,including aberration correction,parallel processing,focal field engineering,and polarization ***,we summarize the present challenges in the field and possible future research.

关键词： femtosecond laser manufacturing spatial light modulation structured light aberration correction parallel processing focal field engineering polarization control

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Light People:*** Mazur speaks about ultrafast optics and education

引用

Light(Science & Applications) 2024年第3期13卷 402-406页

作者： Chenzi Guo Yang Li Changchun institute of Optics Fine Mechanics and PhysicsChinese Academy of SciencesChangchunChina State Key Laboratory of precision Measurement Technology and Instrument Department of Precision InstrumentTsinghua UniversityBeijingChina

*** Mazur is a great influencer over and beyond the optics *** a physicist,he is a pioneer of ultrafast optics and was one of the inventors of colliding-pulse mode-locked *** an educator,he not only gave talks to thousands,but also revolutionized teaching with his globally renowned methodology“Peer Instruction”.As a leader and entrepreneur,he co-founded several companies and was President of Optica(formerly the Optical Society)and currently is the Chair of the Optica ***,Light:Science&Applications talked with *** Mazur about his opinions on research,education and *** full interview video can be found in the Supplementary File.

关键词： optics education companies

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：