检索结果-南通市图书馆

Microstructure Regulation and Combustion Performance Optimization of PVDF/Al Composite Powder by Non-covalent Functionalized Graphenes

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of technology(Materials Science) 2024年第4期39卷 904-911页

作者：易卓然 DENG Haoyuan QIN Mei 孙一 LUO Guoqiang State Key Laboratory of Advanced technology for Materials Synthesis and processing Wuhan University of TechnologyWuhan 430070China

Graphene prepared by non-covalent modification of sulfonated poly(ether-ether-ketone)(SPG)was combined with polyvinylidene fluoride(PVDF)/Al to improve the PVDF/Al thermal conductivity while reducing the effect of the thermal resistance at the graphene-polymer *** regulation rule of SPG with different contents on the energy release of fluorine-containing system was *** the content of SPG is 4%,the peak pressure and rise rate of SPG/PVDF/Al composite powder during ignition reach the maximum of 4845.28 kPa and 8683.58 kPa/*** the content of SPG is 5%,the PVDF/Al composite powder is completely coated by SPG,and the calorific value of the material reachs the maximum of 29.094 kJ/*** the design and micro-control of the composite powder,the calorific value of the material can be effectively improved,but the improvement of the mass release rate still depends on the graphene content and surface modification state.

关键词： energetic materials PVDF/Al composites graphene modification energy release combustion

Fast thermal responsive separators toward long-life and safe lithium metal batteries

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2746-2754页

作者： Pingan Li Zhifang Liu Yitong Peng Shanshan Yang Tao Meng Yunhuan Hu Yingjun Jiang Hao Sun Qi Li Xianluo Hu State Key Laboratory of Materials processing and Die and Mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

Lithium metal batteries(LMBs)have been extensively investigated during the past decades because of their ultrahigh energy *** the increasing demand for energy density,however,the safety issue of LMBs has become a significant *** particular,localized areas of increased temperature(namely,hotspots)may be induced and even exacerbated within LMBs by uneven current distribution,internal short circuits,or inadequate heat dissipation,which significantly sacrifices battery safety and cycle ***,we report the rational design and fabrication of a fast thermal responsive separator capable of inhibiting the growth of lithium dendrites and mitigating thermal propagation,thereby reducing the risk of thermal *** as-achieved separator comprises both an electrospun membrane using a phase change material with superior thermal-storage ability and a thermally conductive modification layer of hexagonal boron nitride nanosheets with a fast heat-transfer *** is demonstrated that such a unique integration of heat conduction and heat storage enables the functional separator with attractive abilities to mitigate hotspots and inhibit the growth of lithium dendrites upon the cycling of ***,pouch cells with the thermal-responsive separator,as well as numerical simulations,verify much enhanced safety and cycle life of *** work may offer a new conceptual design of intelligent separators that acts as a functional unit encapsulated within a single cell to boost in-situ thermal management,which will help to develop high-safety and energy-dense LMBs.

关键词： lithium metal batteries separators hotspots safety thermal management

Piezoelectric composite hydrogel with wireless electrical stimulation enhances motor functional recovery of spinal cord injury

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & technology 2024年第5期172卷 228-239页

作者： Zehao Li Guanlin Li Xinyu Wang Zheng Zhao State Key Laboratory of Advanced technology for Materials Synthesis and processing Wuhan University of TechnologyWuhan 430070China Sanya Science and Education Innovation Park of Wuhan University of technology Sanya 572000China

Electrical stimulation(ES)can restore motor function after spinal cord injury(SCI).However,traditional intraspinal ES has many disadvantages,such as the need for a complex circuitry device,an external power source,and a second surgery to remove the *** materials have received increasing at-tention due to their potential to convert ambient mechanical energy into ES without an external power source or implantation of ***,a novel polydopamine(PDA)coated barium titanate(BaTiO_(3))nanoparticles(BaTiO_(3)@PDA)incorporated silk fibroin(SF)hydrogel(SFBT)was *** SFBT hy-drogel was crosslinked by horseradish peroxidase(HRP)/hydrogel peroxide(H_(2)O_(2))to integrate the piezo-electric potency of BaTiO_(3)with the thermal sensitivity of HRP/H_(2)O_(2)for SCI *** hydrogel con-taining 5%(w/v)BaTiO_(3)@PDA nanoparticles(SFBT-5),which was selected for in vivo study,exhibited a short gelation time(5 min),suitable storage modulus(925±35 Pa),and wireless ES(average current of 124 nA).Moreover,Basso-Beattie-Bresnahan(BBB)scores test and footprint analysis demonstrated that the SFBT-5 hydrogel successfully enhanced motor functional recovery of *** histopathological assess-ments,the SFBT-5 hydrogel significantly accelerated spinal cord healing,as indicated by smaller lesion cavities(∼16.7%of the SCI group).Meanwhile,the SFBT-5 hydrogel accelerated neurogenesis,facilitated axon regrowth and synapse formation,and promoted ***,this study highlights the potential of piezoelectric hydrogels for SCI regeneration.

关键词： Silk fibroin Barium titanate Piezoelectric hydrogel Spinal cord injury Electrical stimulation

Rational design and synthesis of Cr_(1-x)Te/Ag_(2)Te composites for solid-state thermoelectromagnetic cooling near room temperature

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第5期33卷 580-586页

作者：孙笑晨谢承昊陈思汗万京伟谭刚健唐新峰 State Key Laboratory of Advanced technology for Materials Synthesis and processing Wuhan University of TechnologyWuhan 430070China International School of Materials Science & Engineering Wuhan University of TechnologyWuhan 430070China

Materials with both large magnetocaloric response and high thermoelectric performance are of vital importance for all-solid-state thermoelectromagnetic *** two properties,however,hardly coexist in single phase materials except previously reported hexagonal Cr_(1-x)Te half metal where a relatively high magnetic entropy change(-△S_(M))of~2.4 J·kg^(-1)·K^(-1)@5 T and a moderate thermoelectric figure of merit(ZT)of~1.2×10^(-2)@300 K are simultaneously *** we aim to increase the thermoelectric performance of Cr_(1-x)Te by compositing with semiconducting Ag_(2)*** is discovered that the in-situ synthesis of Cr_(1-x)Te/Ag_(2)Te composites by reacting their constitute elements above melting temperatures is unsuccessful because of strong phase ***,at elevated temperatures(T>800 K),Cr_(1-x)Te has a much lower deformation energy than Ag_(2)Te and tends to become more Cr-deficient by capturing Te from Ag_(2)***,Ag is insufficiently reacted and as a metal it deteriorates *** then rationalize the synthesis of Cr_(1-x)Te/Ag_(2)Te composites by ex-situ mix of the pre-prepared Cr_(1-x)Te and Ag_(2)Te binary compounds followed by densification at a low sintering temperature of 573 K under a pressure of 3.5 *** show that by compositing with 7 mol%Ag_(2)Te,the Seebeck coefficient of Cr_(1-x)Te is largely increased while the lattice thermal conductivity is considerably reduced,leading to 72%improvement of *** comparison,-△S_(M)is only slightly reduced by 10%in the *** work demonstrates the potential of Cr_(1-x)Te/Ag_(2)Te composites for thermoelectromagnetic cooling.

关键词： thermoelectromagnetic cooling thermoelectric magnetocaloric composite chromium telluride

Effect of Ti and Ta content on the oxidation resistance of Co-Ni-based superalloys

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 351-361页

作者： Yuheng Zhang Zixin Li Yunwei Gui Huadong Fu Jianxin Xie Beijing Advanced Innovation Center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Institute of Materials Intelligent technology Liaoning Academy of MaterialsShenyang 110004China Key Laboratory for Advanced Materials processing(MOE) University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic Materials and processing for Modern Transportation University of Science and Technology BeijingBeijing 100083China

Co-Ni-based superalloys are known for their capability to function at elevated temperatures and superior hot corrosion and thermal fatigue ***,these alloys show potential as crucial high-temperature structural materials for aeroengine and gas turbine hot-end *** previous work elucidated the influence of Ti and Ta on the high-temperature mechanical properties of ***,the intricate interaction among elements considerably affects the oxidation resistance of *** this paper,Co-35Ni-10Al-2W-5Cr-2Mo-1Nb-xTi-(5−x)Ta alloys(x=1,2,3,4)with varying Ti and Ta contents were designed and compounded,and their oxidation resistance was investigated at the temperature range from 800 to 1000℃.After oxidation at three test conditions,namely,800℃for 200 h,900℃for 200 h,and 1000℃for 50 h,the main structure of the oxide layer of the alloy consisted of spinel,Cr_(2)O_(3),and Al_(2)O_(3)from outside to *** consisting of Ta,W,and Mo formed below the Cr_(2)O_(3)*** interaction of Ti and Ta imparted the highest oxidation resistance to 3Ti2Ta ***,an excessive amount of Ti or Ta resulted in an adverse effect on the oxidation resistance of the *** study reports the volatilization of W and Mo oxides during the oxidation process of Co-Ni-based cast superalloys with a high Al content for the first time and explains the formation mechanism of holes in the oxide *** results provide a basis for gaining insights into the effects of the interaction of alloying elements on the oxidation resistance of the alloys they form.

关键词： Co-Ni-based superalloys high-temperature oxidation Ti and Ta elements formation mechanism of holes

Preparation and thermal Stability of AlMoON Based Solar Selective Absorption Coating

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of technology(Materials Science) 2024年第4期39卷 854-862页

作者：闵捷 YUAN Wenxu CHEN Yufei LAN Yapeng YAN Mengdi LIU Hanze CHENG Xudong 代路 Hubei Provincial Key Laboratory of Green Materials for Light Industry Hubei University of TechnologyWuhan 430068China Col-laborative Innovation Center of Green Light-weight Materials and processing Hubei University of TechnologyWuhan 430068China School of Materials and Chemical Engineering Hubei University of TechnologyWuhan 430068China School of Industrial Design Hu-bei University of TechnologyWuhan 430068China State Key Laboratory of Advanced technology for Materials Synthesis and Process-ing Wuhan University of TechnologyWuhan 430070China Science and technology on thermal Energy and Power Laboratory Wuhan Second Ship Design&Research InstituteWuhan 430205China

AlMoON based solar selective absorption coatings were deposited on stainless steel substrate by magnetron *** coatings included infrared reflection layer Mo,absorption layer AlMoN,absorption layer AlMoON and antireflection layer AlMoO from bottom to *** surface of the deposited coatings is flat without obvious *** absorptivity and emissivity are 0.896 and 0.09,respectively,and the quality factor is *** heat treatment at 500℃-36 h,the surface roughness of the coating increases,a small number of cracks and other defects appear,and the broken part is still attached to the coating surface.A certain degree of element diffusion occurs in the coatings,resulting in the decline of the optical properties of the *** absorptivity and emissivity are 0.883 and 0.131,respectively,the quality factor is 7.06,and the PC value is *** coatings do not fail under this condition and have certain thermal stability.

关键词： AlMoON coating preparation thermal stability

Nb-and Ta-doped(Hf,Zr,Ti)C multicomponent carbides with enhanced oxidation resistance at 2500℃

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第3期13卷 332-344页

作者： Shiyan Chen Jinming Wang Zhaoke Chen Weilong Song Yi Zeng Xingchao Li Tongqi Li Xiang Xiong State Key Laboratory of Powder Metallurgy Central South UniversityChangsha 410083China Aerospace Research Institute of Materials&processing technology China Academy of Launch Vehicle TechnologyBeijing 100076China

Enhancing oxidation resistance of multicomponent carbides above 2000℃is critical for their thermal protection *** this purpose,novel Nb-and Ta-doped(Hf,Zr,Ti)C multicomponent carbides were designed to improve their oxidation resistance at 2500℃.The results demonstrated that Nb and Ta doping reduced the oxidation rate constant by 16.67%and 25.17%,respectively,thereby significantly improving the oxidation resistance of(Hf,Zr,Ti)*** enhancement was attributed to the changes in oxycarbide composition and distribution within the oxide layer by adding Nb and *** to the different oxidation tendencies of the constituent elements,a distinctive structure was formed in which(Hf,Zr)O_(2)served as a skeleton,and various oxycarbides were dispersed throughout the oxide *** doped Nb and Ta were retained within oxycarbides,retarding the diffusion of oxygen into the *** importantly,the addition of Nb and Ta reduced the size of oxycarbides,decreasing both size and quantity of the pores in the oxide layer and facilitating the formation of a more effective oxygen barrier.

关键词： (Hf,Zr,Ti)C oxidation behaviour ultra-high-temperature oxidation Nb and Ta doping oxycarbides

Enhanced thermoelectric and mechanical properties of Bi_(0.5)Sb_(1.5)Te_(3) alloy with dispersed yttrium oxide ceramic nanoparticles

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1758-1768页

作者： Cun-Cheng Li Ming-Wei Zhang Ji-Wu Xin Lei Wei Wen-Yu Zhao School of Materials Science and Engineering Shandong University of TechnologyZibo255000China School of Electrical and Electronic Engineering Nanyang Technological UniversitySingapore639798Singapore State Key Laboratory of Advanced technology for Materials Synthesis and processing Wuhan University of TechnologyWuhan430070China

Reducing thermal conductivity while avoiding adverse interfacial reactions during sintering is crucial for improving the thermoelectric performance of Bi_(2)Te_(3)based *** ceramic nanoparticles are good candidates for achieving this *** this study,we designed and prepared a series of p-type Bi_(0.5)Sb_(1.5)Te_(3)nanocomposites decorated with Y_(2)O_(3)ceramic nanoparticles via ball-milling dispersion and spark-plasma *** to the chemical stability of the ceramics,no traces of atomic doping or interfacial reactions were *** measurements revealed that the Y_(2)O_(3)nanoparticles distributed along the grain boundaries acted as energy-dependent carrier-filtering centers to improve the scattering parameter and Seebeck coefficient,contributing to the elevated power factor even with a decreased electrical ***,the incorporated Y_(2)O_(3)nanoparticles and various defect structures they induced effectively strengthened the phonon scattering and suppressed the lattice thermal ***,a peak figure of merit(ZT)of 1.23 at 313 K was achieved for 0.4%Y_(2)O_(3)/Bi_(0.5)Sb_(1.5)Te_(3),which is 13%higher than that of the *** addition,the Vickers hardness of the composite material was 35%higher than that of the *** study demonstrates the effectiveness of ceramic nanoparticles in synergistic ally improving the thermoelectric and mechanical properties,which may be further extended to other thermoelectric systems.

关键词： Bi_(0.5)Sb_(1.5)Te_3 alloy Y_(2)O_(3) ceramic nanoparticles Microstructures Thermoelectric performance Mechanical properties

Observation and verification of surface electrical explosion driven by radial-distributed pulsed current in laboratory lightning strike test

在线全文

学校读者我要写书评

暂无评论

High Voltage 2024年第1期9卷 137-149页

作者： Ruoyu Han Yuchen Cao Yakun Liu Xi Chen Ting Li Chen Li Pengfei Li State Key Laboratory of Explosion Science and technology Beijing Institute of TechnologyBeijingChina School of Mechatronical Engineering Beijing Institute of TechnologyBeijingChina Department of Electrical Engineering Shanghai Jiaotong UniversityShanghaiChina Beijing Institute of Astronautical System Engineering BeijingChina Aerospace Research Institute of Materials and processing technology BeijingChina

The laboratory lightning test is essential for assessing the effectiveness of lightning strike protection(LSP).Particularly,direct lightning strike damage can be performed with pulsed current injection into the *** paper focuses on the dynamic process of arc plasma and shock wave behaviour in the vicinity of the‘strike’point.A rod-plate discharge load is built for testing aluminium and coated plate under 40-kA-level pulsed *** visualisation of the luminous discharge plasma and its flow field via high-speed photography(from different angles)is meticulously designed and implemented,synchronised with electro-physical *** results indicate some new mechanisms for lightning strike damage,apart from the impulse heat loading from the thermal *** transient current injection through the arc root concentrates on a thin skin layer(skin-depth effect),with the radial-attenuated current density,driving asynchronously electrical explosions on the plate *** inhomogeneous Joule heating of the plate leads to outwardly propagating phase transition and shock wave along the conductive *** addition,the electro-thermal instability is observed and regarded as the seed of irregular erosion *** information reveals two different plasma states of main discharge arc channel and adjacent surface electrical *** correspondence of the physical mechanism of electrical explosion and optical radiation is *** images for different regions depict erosion characteristics and summarise influencing factors,further confirming the mechanism *** research clarifies the role of skin-depth effect in transaction arc erosion for electrode,complements the electrical explosion theory with unevenly distributed current and helps optimise strategies of LSP.

关键词： electrical lightning radial