检索结果-南通市图书馆

Synchronous deprotonation–protonation for mechanically robust chitin/aramid nanofibers conductive aerogel with excellent pressure sensing, thermal management, and electromagnetic interference shielding

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano research 2024年第3期17卷 2038-2049页

作者： Xinxin Zhang Kunpeng Qian Jianhui Fang Sineenat Thaiboonrod Miao Miao Xin Feng Department of Chemistry College of SciencesShanghai UniversityShanghai 200444China research center of Nano science and technology College of SciencesShanghai UniversityShanghai 200444China School of Materials sciences and Engineering Shanghai UniversityShanghai 200444China National Nanotechnology center(NANOTEC) National Science and Technology Development Agency(NSTDA)Thailand Science ParkPathum Thani 12120Thailand

Aerogels with regularly porous structure and uniformly distributed conductive networks have received extensive attention in wearable electronic sensors,electromagnetic shielding,and so ***,the poor mechanical properties of the emerging nanofibers-based aerogels are limited in practical *** this work,we developed a synchronous deprotonation–protonation method in the KOH/dimethyl sulfoxide(DMSO)system at room temperature for achieving chitin cross-linked aramid nanofibers(CANFs)rather than chitin nanofibers(ChNFs)and aramid nanofibers(ANFs)separately by using chitin and aramid pulp as raw *** freeze-drying process,the cross-linked chitin/aramid nanofibers(CA)aerogel exhibited the synergetic properties of ChNF and ANF by the dual-nanofiber compensation *** mechanical stress of CA aerogel was 170 kPa at 80%compressive strain,increased by 750%compared with pure ChNF ***,the compressibility of CA aerogel was somewhat improved compared to ANF *** enhancement verified that the crosslinking reaction between ANF and ChNF during the synchronous deprotonation process was ***,the conductive aerogels with uniform porous structure(CA-M)were successfully obtained by vacuum impregnating CA aerogels in Ti_(3)C_(2)T_(x) MXene solution,displaying low thermal conductivity(0.01 W/(m·K)),high electromagnetic interference(EMI)shielding effectiveness(SE)(75 dB),flame retardant,and heat ***,the as-obtained CA-M aerogels were also applied as a pressure sensor with excellent compression cycle stability and superior human motion monitoring *** a result,the dual-nanofiber based conductive aerogels have great potentials in flexible/wearable electronics,EMI shielding,flame retardant,and heat insulation.

关键词： synchronous deprotonation–protonation electromagnetic interference(EMI)shielding flame retardant heat insulation pressure sensing

Design of Resilient Sensor Networks Balancing Resilience and Efficiency

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Disaster Risk science 2024年第1期15卷 107-115页

作者： Sergey N.Vecherin Kiril D.Ratmanski Luke Hogewood Igor Linkov Cold Regions research and Engineering Laboratory Engineering Research and Development CenterHanoverNH 03755USA Environmental Laboratory Engineering Research and Development CenterVicksburgMS 39180USA

In recent years,the notion of resilience has been developed and applied in many technical areas,becoming exceptionally pertinent to disaster risk *** a disaster situation,accurate sensing information is the key to efficient recovery *** general,resilience aims to minimize the impact of disruptions to systems through the fast recovery of critical functionality,but resilient design may require redundancy and could increase *** this article,we describe a method based on binary linear programming for sensor network design balancing efficiency with *** application of the developed framework is demonstrated for the case of interior building surveillance utilizing infrared sensors in both twoand three-dimensional *** method provides optimal sensor placement,taking into account critical functionality and a desired level of resilience and considering sensor type and *** problem formulation,resilience requirements,and application of the optimization algorithm are described in *** of sensor locations with and without resilience requirements shows that resilient configuration requires redundancy in number of sensors and their intelligent *** tasks are successfully solved by the described method,which can be applied to strengthen the resilience of sensor networks by *** proposed methodology is suitable for large-scale optimization problems with many sensors and extensive coverage areas.

关键词： Binary linear programming Optimal sensor placement Redundant networks Resilience and efciency Resilient sensor networks

B-COPNA resin formation from ethylene tar light fractions:Process development and mechanical exploration by molecular simulation

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第6期70卷 118-129页

作者： Hongyan Shen Lingrui Cui Xingguo Wei Yuanqin Zhang Lian Cen Jun Xu Fahai Cao Engineering research center of Large Scale Reactor East China University of Science and TechnologyShanghai 200237China

An efficient utilization strategy of ethylene tar(ET),the main by-product of the ethylene cracking unit,is urgently required to meet demands for modern petrochemical *** the other hand,condensed polynuclear aromatic resin of moderate condensation degree(B-COPNA)is a widely used carbon material due to its superb processability,the production of which is,however,seriously limited by the high cost of raw *** such context,an interesting strategy was proposed in this study for producing B-COPNA resin using crosslinked light fractions of ethylene tar(ETLF,boiling point<260℃)facilitated by molecular simulation.1,4-Benzenedimethanol(PXG)was first selected as the crosslinking agent according to the findings of molecular *** effects of operating conditions,including reactions temperature,crosslinking agent,and catalyst content on the softening point and yield of B-COPNA resin products were then investigated to optimize the *** reaction mechanism of resin production was studied by analyzing the molecular structure and transition state of ETLF and crosslinking *** was shown that PXG exhibited a superior capacity of withdrawing electrons and a higher electrophilic reactivity than other crosslinking *** addition to the highest yield and greatest heat properties,PXG-prepared resin contained the most condensed *** corresponding optimized conditions of resin preparation were 180℃,1:1.9(PXG:ETLF),and 3%(mass)of catalyst content with a resin yield of 78.57%.It was the electrophilic substitution reaction that occurred between the ETLF and crosslinking agent molecules that were responsible for the resin formation,according to the experimental characterization and molecular ***,it was confirmed that the proposed strategy and demonstrated process can achieve a clean and high value-added utilization of ETLF via B-COPNA resin preparation,bringing huge economic value to the current petrochemical industry.

关键词： Ethylene tar Crosslinking COPNA resin Molecular simulation Transient state

Two-dimensional semiconductor heterostructures for photocatalytic CO_(2)conversion

在线全文

学校读者我要写书评

暂无评论

science China Chemistry 2024年第8期67卷 2434-2447页

作者： Yang Wu Mingyu Wu Yongfu Sun Yi Xie Hefei National research center for Physical sciences at Microscale University of Science and Technology of ChinaHefei 230026China

The CO_(2)reduction into carbon-contained fuel via solar energy offers the powerful tools to realize the zero-emission carbon *** to the intriguing features of the two-dimensional(2D)heterostructures,it is susceptible to modulate the electronic structure as well as the surface geometry for optimizing the photocatalytic CO_(2)*** this perspective,we surveyed the fundamental insights of 2D semiconductor heterostructures,involving the fabrication strategies and classification of the 2D semiconductor ***,we have detailly discussed the overview of 2D semiconductor heterostructure for optimizing CO_(2)photocatalytic influenced factors,including the solar energy utilization,photogenerated carriers separation,and redox reaction ***,we showed the significant advantages of 2D heterostructures in elevating CO_(2)photoreduction performance,focusing on activity,selectivity and *** analyzing the limitations and developments,we ended by putting forward insights into the further researches about the CO_(2)photocatalysts and reactor design,even industrial applications.

关键词： two-dimensional semiconductor heterostructures photocatalysis CO_(2)conversion

Influence of cerium and yttrium addition on strength and electrical conductivity of pure aluminum alloys

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第3期42卷 600-611,I0006页

作者： Guojian Lin Lu Li Zhengwei Guo Xianjun Jia Xiao Wang Zhentao Yuan Guoxing Zhang Yun Zhan Quan Shan Zulai Li Faculty of Materials science and Engineering Kunming University of Science and TechnologyKunming650093China research center for Analysis and Measurement Kunming University of Science and TechnologyKunming650093China City College Kunming University of Science and TechnologyKunming650051China

To develop pure aluminum alloys with high conductivity and strength, Al-0.2Ce and Al-0.2Ce-0.1Y alloys were prepared by rolling and annealing processes in this study. The effects of trace rare earth elements on the strength and electrical conductivity of the pure aluminum alloys were investigated. It is revealed that the addition of Ce and Y to pure aluminum can effectively enhance the strength and electrical conductivity of the alloys. In Al-0.2Ce, the addition of Ce can effectively refine the grain size of a-Al, with an average grain size of 90.68 μm in the as-cast state. The grain size of the alloy is further reduced to 87.55 μm by the simultaneous addition of Y. The synergistic addition of Ce and Y changes the properties of the alloy. The addition of Ce and Y also produces the Al_(11)Ce_(3) and Al_(3)Y second phases, which have coherent relationship with a-Al. The two-dimensional mismatch degree was calculated to be only 4.43%and 0.85%, respectively, which can provide a certain amount of nucleation substrate for a-Al in the incubation stage. The interfacial match between the L1_(2)structure of Al_(3)Y and a-Al was calculated using first-principles simulations. The results indicate that Al_(3)Y has a strong bonding effect with a-Al. Nanoscale second phases at grain boundaries can be effective in reducing resistivity due to dislocation *** second phases with better matching interfaces to the substrate have no positive effect on the scattering motion of electrons.

关键词： Pure aluminum Rare earths Impurity purification First-principles calculations Strength-conductivity contradiction

Geometry characteristics and wide temperature behavior of silicon-based GaN surface acoustic wave resonators with ultrahigh quality factor

在线全文

学校读者我要写书评

暂无评论

science China(Information sciences) 2024年第2期67卷 267-278页

作者： Guofang YU Renrong LIANG Haiming ZHAO Lei XIAO Jie CUI Yue ZHAO Wenpu CUI Jing WANG Jun XU Jun FU Tianling REN School of Integrated Circuits Tsinghua University Beijing National research center for Information science technology Tsinghua University

Surface acoustic wave(SAW) resonators with an ultrahigh Q-factor are designed and fabricated on silicon-based gallium nitride(GaN/Si). The temperature-dependent performance is characterized over a wide range, from 10 to 500 K. Finite element analysis is employed to guide the design of the SAW resonator from indications of the Rayleigh mode and weak propagation direction dependence of SAW in the c-plane of GaN/Si. The SAW resonator with 100 pairs of interdigital transducers(IDT), 100 pairs of grating reflectors(GR) for each side, aperture size of 80 μm, metallization ratio of 0.5, and electrode width of 500 nm resonates at 1.9133 GHz accordingly with an ultrahigh Q-factor of 7622 at room temperature, which contributes the fr× Qr, up to 14.583×1012Hz. A resonator operating over 10 to 500 K indicates an approximately linear decreasing temperature dependence above 280 K while being approximately constant below 40 K. The fitting to resonator characteristics using the modified Butterworth Van Dyke(m BVD) model reveals a reduction in both the electrode and mechanical losses while worsening the dielectric loss with cooling down.

关键词： GaN/Si SAW resonator ultrahigh Q-factor temperature-dependent performance mBVD losses

Effect of Three-High Rotary Piercing Process on Microstructure,Texture and Mechanical Properties of Magnesium Alloy Seamless Tube

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 953-968页

作者： Xiaofeng Ding Zehao Wu Tong Li Jianxun Chen Yuanhua Shuang Baosheng Liu Heavy Machinery Engineering research center of Education Ministry Taiyuan University of Science and TechnologyTaiyuan030024China College of Materials science and Engineering Taiyuan University of Science and TechnologyTaiyuan030024China

Mg alloy seamless tubes(MASTs)were prepared through three-high rotary piercing process,effect of billet temperature,feed angle and plug advance on microstructure,texture and mechanical properties of tubes were *** effect on the deformation mechanism and improving mechanical properties mechanism of this process for MASTs were *** results show that the grain size could be refined to 11.3-31.1%of the initial grain size and the microstructure was more uniform due to the accumulation of *** formation of high strain gradient at the grain boundary activated the non-basal *** piercing process could change the grain orientation of as-extruded billet and eliminate the initial basal texture to produce new favorable *** the process could accelerate the continuous dynamic recrystallization *** piercing,yield strength of pierced tubes decreased by 6.7%,ultimate tensile strength(UTS)and elongation increased by 32.4 and 45%,respectively,at optimal *** plate-shapedβ_(1)-Mg_(17)Al_(12) orientation transformed from basal plates to prismatic plates,facilitating the increase in UTS and *** decrease size of nanoscale precipitates could reduce the cracking *** critical resolved shear stress ratios of pyramidal(10−11)slip and(11−22)slip to basal slip for the sample including prismatic plates both decreased compared to that including basal *** could enhance the ductility of tube ***,grain boundary sliding could contribute to a better ductility via coordinating deformation and reducing stress concentration during piercing process.

关键词： Mg alloy tube Rotary piercing Microstructure Texture Mechanical properties

Privacy-Preserving Consensus-Based Distributed Economic Dispatch of Smart Grids via State Decomposition

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第5期11卷 1250-1261页

作者： Wei Chen Guo-Ping Liu The authors are with the center for Control science and technology Southern University of Science and TechnologyShenzhen 518055China

This paper studies the privacy-preserving distributed economic dispatch(DED)problem of smart *** autonomous consensus-based algorithm is developed via local data exchange with neighboring nodes,which covers both the islanded mode and the grid-connected mode of smart *** prevent power-sensitive information from being disclosed,a privacy-preserving mechanism is integrated into the proposed DED algorithm by randomly decomposing the state into two parts,where only partial data is *** objective is to develop a privacy-preserving DED algorithm to achieve optimal power dispatch with the lowest generation cost under physical constraints while preventing sensitive information from being *** this end,a comprehensive analysis framework is established to ensure that the proposed algorithm can converge to the optimal solution of the concerned optimization problem by means of the consensus theory and the eigenvalue perturbation *** particular,the proposed autonomous algorithm can achieve a smooth transition between the islanded mode and the grid-connected ***,rigorous analysis is given to show privacy-preserving performance against internal and external ***,case studies illustrate the feasibility and validity of the developed algorithm.

关键词： preserving autonomous mode

The application of omics technologies for understanding tropical plants-based bioactive compounds in ruminants:a review

在线全文

学校读者我要写书评

暂无评论

Journal of Animal science and Biotechnology 2024年第4期15卷 1376-1390页

作者： Metha Wanapat Gamonmas Dagaew Sukruthai Sommai Maharach Matra Chaichana Suriyapha Rittikeard Prachumchai Uswatun Muslykhah Srisan Phupaboon Tropical Feed Resources research and development center(TROFREC) Department of Animal ScienceFaculty of AgricultureKhon Kaen UniversityKhon Kaen 40002Thailand Department of Animal science Faculty of Agricultural TechnologyUniversity of Technology ThanyaburiRajamangala Pathum Thani 12130Thailand

Finding out how diet impacts health and metabolism while concentrating on the functional qualities and bioactive components of food is the crucial scientific objective of nutritional research. The complex relationship between metabolism and nutrition could be investigated with cutting-edge "omics" and bioinformatics techniques. This review paper provides an overview of the use of omics technologies in nutritional research, with a particular emphasis on the new applications of transcriptomics, proteomics, metabolomics, and genomes in functional and biological activity research on ruminant livestock and products in the tropical regions. A wealth of knowledge has been uncovered regarding the regulation and use of numerous physiological and pathological processes by gene, m RNA, protein, and metabolite expressions under various physiological situations and guidelines. In particular, the components of meat and milk were assessed using omics research utilizing the various methods of transcriptomics, proteomics, metabolomics, and genomes. The goal of this review is to use omics technologies—which have been steadily gaining popularity as technological tools—to develop new nutritional, genetic, and leadership strategies to improve animal products and their quality control. We also present an overview of the new applications of omics technologies in cattle production and employ nutriomics and foodomics technologies to investigate the microbes in the rumen ecology. Thus, the application of state-of-the-art omics technology may aid in our understanding of how species and/or breeds adapt, and the sustainability of tropical animal production, in the long run, is becoming increasingly important as a means of mitigating the consequences of climate change.

关键词： Animal nutrition Animal production Cutting-edge Molecular markers Ruminants