检索结果-南通市图书馆

Influence of the position relationship between the cathode and magnetic separatrix on the discharge process of a Hall thruster

引用

Plasma Science and Technology 2024年第1期26卷 74-81页

作者：曹希峰麻洪宁夏国俊刘辉赵方舟王宇航陈巨辉 School of Mechanical and Power engineering Harbin University of Science and TechnologyHarbin 150001People’s Republic of China Shanghai Institute of Satellite engineering Shanghai 20040People’s Republic of China lab of Plasma Propulsion Harbin Institute of TechnologyHarbin 150001People’s Republic of China

Previous studies have shown that there is an obvious coupling relationship between the installation location of the external cathode and the magnetic separatrix in the plume region of a Hall *** this paper,the particle-in-cell simulation method is used to compare the thruster discharge process under the conditions of different position relationships between the cathode and the magnetic *** comparing the distribution of electron conduction,potential,plasma density and other microscopic parameters,we try to explain the formation mechanism of the discharge *** simulation results show that the cathode inside and outside the magnetic separatrix has a significant effect on the distribution of potential and plasma *** the cathode is located on the outer side of the magnetic separatrix,the potential above the plume region is relatively low,and there is a strong potential gradient above the plume *** potential gradient is more conducive to the radial diffusion of ions above the plume,which is the main reason for the strong divergence of the *** distribution of ion density is also consistent with the distribution of *** the cathode is located on the outer side of the magnetic separatrix,the radial diffusion of ions in the plume region is ***,by comparing the results of electron conduction,it is found that the traiectories of electrons emitted from the cathode are significantly different between the inner and outer sides of the magnetic *** is mainly because the electrons are affected by the magnetic mirror effect of the magnetic tip,which makes it difficult for the electrons to move across the magnetic *** is the main reason for the difference in potential *** this paper,the simulation results of macroscopic parameters under several conditions are also compared,and they are consistent with the experimental *** cathode is located on the inner side of the ma

关键词： Hall thruster cathode magnetic separatrix

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Thermodynamic Performance Analysis of E/F/H-Class Gas Turbine Combined Cycle with Exhaust Gas Recirculation and Inlet/Variable Guide Vane Adjustment under Part-Load Conditions

引用

Journal of Thermal Science 2024年第1期33卷 348-367页

作者： LI Keying CHI Jinling WANG Bo ZHANG Shijie Key lab of Advanced Energy and Power Institute of Engineering ThermophysicsChinese Academy of SciencesBeijing 100190China University of Chinese Academy of Sciences Beijing 100049China School of Mechanical Electronic&Information engineering China University of Mining&Technology-BeijingBeijing 100083China

Exhaust gas recirculation control(EGRC),an inlet air heating technology,can be utilized in combination with inlet/variable guide vane control(IGV/VGVC) and fuel flow control(FFC) to regulate the load,thereby effectively improving the part-load(i.e.,off-design) performance of the gas turbine combined cycle(GTCC).In this study,the E-,F-,and H-Class EGR-GTCC design and off-design system models were established and validated to perform a comparative analysis of the part-load performance under the EGR-IGV-FFC and conventional IGV-FFC strategies in the E/F/H-Class *** show that EGR-IGV-FFC has considerable potential for the part-load performance enhancement and can show a higher combined cycle efficiency than IGV-FFC in the E-,F-,and H-Class ***,the part-load performance improvement in the corresponding GTCC was weakened for the higher class of the gas turbine because of the narrower load range of EGR action and the deterioration of the gas turbine ***,EGR-IGV-FFC was inferior to IGV-FFC in improving the performance at loads below 50% for the H-Class *** results obtained in this paper could help guide the application of EGR-IGV-FFC to enhance the part-load performance of various classes of GTCC systems.

关键词： E/F/H-Class gas turbine combined cycle performance improvement part-load conditions exhaust gas recirculation inlet/variable guide vane

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

In-situ interfacial passivation and self-adaptability synergistically stabilizing all-solid-state lithium metal batteries

引用

Journal of Energy Chemistry 2024年第1期88卷 282-292,I0007页

作者： Huanhui Chen Xing Cao Moujie Huang Xiangzhong Ren Yubin Zhao Liang Yu Ya Liu Liubiao Zhong Yejun Qiu Shenzhen engineering lab of Flexible Transparent Conductive Films School of Materials Science and EngineeringHarbin Institute of TechnologyShenzhen 518055GuangdongChina Guangdong Provincial Key laboratory of Semiconductor Optoelectronic Materials and Intelligent Photonic Systems School of Materials Science and EngineeringHarbin Institute of TechnologyShenzhen 518055GuangdongChina College of Chemistry and Environmental engineering Shenzhen UniversityShenzhen 518060GuangdongChina School of Resource and Environmental Sciences Wuhan UniversityWuhan 430072HubeiChina

The function of solid electrolytes and the composition of solid electrolyte interphase(SEI)are highly significant for inhibiting the growth of Li ***,we report an in-situ interfacial passivation combined with self-adaptability strategy to reinforce Li_(0.33)La_(0.557)TiO_(3)(LLTO)-based solid-state ***,a functional SEI enriched with LiF/Li_(3)PO_(4) is formed by in-situ electrochemical conversion,which is greatly beneficial to improving interface compatibility and enhancing ion *** the polarized dielectric BaTiO_(3)-polyamic acid(BTO-PAA,BP)film greatly improves the Li-ion transport kinetics and homogenizes the Li *** expected,the resulting electrolyte offers considerable ionic conductivity at room temperature(4.3 x 10~(-4)S cm^(-1))and appreciable electrochemical decomposition voltage(5.23 V)after electrochemical *** Li-LiFePO_(4) batteries,it shows a high specific capacity of 153 mA h g^(-1)at 0.2C after 100 cycles and a long-term durability of 115 mA h g^(-1)at 1.0 C after 800 ***,a stable Li plating/stripping can be achieved for more than 900 h at 0.5 mA cm^(-2).The stabilization mechanisms are elucidated by ex-situ XRD,ex-situ XPS,and ex-situ FTIR techniques,and the corresponding results reveal that the interfacial passivation combined with polarization effect is an effective strategy for improving the electrochemical *** present study provides a deeper insight into the dynamic adjustment of electrode-electrolyte interfacial for solid-state lithium batteries.

关键词： Solid-state lithium batteries Composite solid electrolyte In-situ polymerization Interfacial passivation layer Self-adaptability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The preparation and performance analysis of zirconium-modified aluminum phosphate-based high-temperature(RT-1500℃)resistant adhesive for joining alumina in extreme environment

引用

Journal of Advanced Ceramics 2024年第7期13卷 911-932页

作者： Jingxuan Liu Yange Wan Bo Xiao Jiancun Li Zhanming Hu Ruoyu Zhang Xiaoxia Hu Jiachen Liu Guoshuai Cai Hongli Liu Mingchao Wang College of Science Civil Aviation University of ChinaTianjin 300300China Department of Safety engineering Civil Aviation University of ChinaTianjin 300300China Binzhou Beicheng Construction engineering Materials Testing Co. Ltd.Binzhou 256602China Department of Aviation engineering Civil Aviation University of ChinaTianjin 300300China School of Materials and engineering Key Lab of Advanced Ceramics and Machining Technology of Ministry of EducationTianjin UniversityTianjin 300072China

High-temperature-resistant adhesives are critical materials in the aerospace *** zirconium-modified aluminum phosphate-based adhesives developed in this work had the advantage of adjustable thermal expansibility,achieving a high matching of coefficient of thermal expansion(CTE)with *** introduction of zirconium can significantly improve the thermal stability of the adhesive matrix,and the Zr/Al ratio substantially affects the various reaction processes inside the adhesive,especially the types of zirconium-containing *** of the zirconium-containing compounds in the A7Z3 adhesive were ZrO2 only when the mass ratio of zirconium hydroxide to aluminum hydroxide was 3:7,which was the key reason why it had the highest *** room-temperature bonding strength of A7Z3 after heat treatment at 1500℃reached 67.2 *** pretreatment at 1500℃,the high-temperature bonding strength of A7Z3 was greater than 50 MPa in the range of(room temperature)RT-1000℃.After 40 thermal cycles between RT and 1500℃,the bonding strength still reached 10 *** bonding occurred at temperatures below 1000℃,while chemical bonding dominated above 1000℃based on the generation of Al5BO9 and mullite at the interfaces.

关键词： high-temperature-resistant adhesive thermal expansion property zirconium-modified aluminum phosphate bonding performance thermal cycling bonding mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Lightweight,Strong and High Heat-Resistant Poly(lactide acid)Foams via Microcellular Injection Molding with Self-Assembly Nucleating Agent

引用

Chinese Journal of Polymer Science 2024年第6期42卷 739-750页

作者： Xiao-Hu Bing Wen-Yu Ma Ming-Hui Wu Peng Gao Xiao Zhou Hai-Bin Luo Long Wang Wen-Ge Zheng School of materials Science and engineering Shanghai UniversityShanghai200444China Ningbo Key lab of Polymer Materials Ningbo Institute of Material Technology and EngineeringChinese Academy of SciencesNingbo315201China University of Chinese Academy of Sciences Beijing100049China

Poly(lactide acid)(PLA)foams have shown considerable promise as eco-friendly alternatives to nondegradable plastic foams,such as polystyrene(PS)***,PLA foam typically suffers from low heat-resistance and poor cellular structure stemming from its inherent slow crystallization rate and low melt *** this study,a high-performance PLA foam with well-defined cell morphology,exceptional strength and enhanced heat-resistance was successfully fabricated via a core-back microcellular injection molding(MIM)*** scanning calorimetry(DSC)results revealed that the added hydrazine-based nucleating agent(HNA)significantly increased the crystallization temperature and accelerated the crystallization process of ***,the addition of a 1.5 wt%of HNA led to a significant reduction in PLA’s cell size,from 43.5µm to 2.87µm,and a remarkable increase in cell density,from 1.08×10^(7)cells/cm^(3)to 2.15×10^(10)cells/cm^(3).This enhancement resulted in a final crystallinity of approximately 55.7%for the PLA blend foam,a marked improvement compared to the pure PLA ***,at 1.5 wt%HNA concentration,the tensile strength and tensile toughness of PLA blend foams demonstrated remarkable improvements of 136%and 463%,***,the Vicat softening temperature of PLA blend foam increased significantly to 134.8°C,whereas the pure PLA foam exhibited only about 59.7℃.These findings underscore the potential for the preparation of lightweight injection-molded PLA foam with enhanced toughness and heat-resistance,which offers a viable approach for the production of high-performance PLA foams suitable for large-scale applications.

关键词： Poly(lactide acid) Nucleating agent Microcellular injection molding Heat-resistance Toughness

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A hybrid memory architecture supporting fine-grained data migration

引用

Frontiers of Computer Science 2024年第2期18卷 31-41页

作者： Ye CHI Jianhui YUE Xiaofei LIAO Haikun LIU Hai JIN National engineering Research Center for Big Data Technology and System Services Computing Technology and System LabCluster and Grid Computing LabSchool of Computer Science and TechnologyHuazhong University of Science and TechnologyWuhan 430074China Department of Computer Science Michigan Technological UniversityMichigan 49931USA

Hybrid memory systems composed of dynamic random access memory(DRAM)and Non-volatile memory(NVM)often exploit page migration technologies to fully take the advantages of different memory *** previous proposals usually migrate data at a granularity of 4 KB pages,and thus waste memory bandwidth and DRAM *** this paper,we propose Mocha,a non-hierarchical architecture that organizes DRAM and NVM in a flat address space physically,but manages them in a cache/memory *** the commercial NVM device-Intel Optane DC Persistent Memory Modules(DCPMM)actually access the physical media at a granularity of 256 bytes(an Optane block),we manage the DRAM cache at the 256-byte size to adapt to this feature of *** design not only enables fine-grained data migration and management for the DRAM cache,but also avoids write amplification for Intel Optane *** also create an Indirect Address Cache(IAC)in Hybrid Memory Controller(HMC)and propose a reverse address mapping table in the DRAM to speed up address translation and cache ***,we exploit a utility-based caching mechanism to filter cold blocks in the NVM,and further improve the efficiency of the DRAM *** implement Mocha in an architectural *** results show that Mocha can improve application performance by 8.2%on average(up to 24.6%),reduce 6.9%energy consumption and 25.9%data migration traffic on average,compared with a typical hybrid memory architecture-HSCC.

关键词： non-volatile memory hybrid memory system data migration fine-grained caching

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Versatile Organogels of Aluminum Oxide Subnanosheets for Locking Solvents and Adhesion

引用

Precision Chemistry 2024年第1期2卷 21-27页

作者： Wanyue Ouyang Xun Wang Key lab of Organic Optoelectronics and Molecular engineering Department of ChemistryTsinghua UniversityBeijing 100084China

Herein,we present a facile strategy to prepare versatile aluminum oxide subnanometer nanosheets with oleic acid and stearic acid ligands(OA-Al SNSs and SA-Al SNSs,respectively).The size effect endows subnanosheets with abundant acting sites,remarkable intermolecular interactions,and unique polymer-like properties,including flexibility,viscoelasticity,and sol-gel transitions,which is quite different from traditional inorganic ***,subnanosheets could form freestanding organogels and OA-Al SNSs exhibit satisfying semisolidification of various solvents,making it an intriguing candidate for the safe storage and transportation of ***,SA-Al SNSs exhibit excellent adhesive properties of high strength on diverse substrates,and it is easy to erase it without any damage,demonstrating the promising prospects in practical applications.

关键词： subnanometer nanomaterials self-assembly polymer-analogue organogel adhesive

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Prestoring lithium into SnO_(2)coated 3D carbon fiber cloth framework as dendrite-free lithium metal anode

引用

Particuology 2024年第1期84卷 89-97页

作者： Tao Wei Yanyan Zhou Cheng Sun Lesheng Liu Sijia Wang Mengting Wang Ye Liu Qing Huang Quanchao Zhuang Yongfu Tang School of Energy and Power Jiangsu University of Science and TechnologyZhenjiang212003China College of Materials Science and engineering Nanjing Forestry UniversityNanjing210037China Li-ion Batteries lab School of Materials Science and EngineeringChina University of Mining and TechnologyXuzhouChina Hebei Key laboratory of Applied Chemistry School of Environmental and Chemical EngineeringYanshan UniversityQinhuangdao066004China

For several decades,the promise of implementing of lithium(Li)metal anodes has been regarded as the"holy grail"for Li-based ***,we have proposed a facile design of a carbon fiber cloth(CFC)framework coated with SnO_(2)nanoparticles through a hydrothermal process,which served as a reliable host for prestoring molten Li to produce a CFC@SnO_(2)@Li composite ***,TEM,HRTEM,XPS and different electrochemical characterizations were carried *** to the synergetic effects of the 3D conductive CFC and the coated lithiophilic SnO_(2)nanoparticles,the designed CFC@SnO_(2)@Li electrodes can buffer the volume changes and reduce the local current density,thus suppress the Li dendrites during ***,the CFC@SnO_(2)electrodes showed a high and stable CE of 98.6%for 1000 cycles at a current density of 1 mA cm^(-2)(1 mAh cm^(-2)).What is more,at a high current density of 5 mA cm^(-2)and a high areal capacity of 5 mAh cm^(-2),the symmetric cell displayed relatively low overpotential and long cycling lifetime of 1600 *** results confirm its great potential as lithium metal anodes in practical battery applications.

关键词： Lithiophilic Lithium metal anodes SnO_(2) 3D anode Dendrite-free

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Highly adaptive triboelectric tactile sensor on the foot of autonomous wall-climbing robots for detecting the adhesion state and avoiding the hazard

引用

Nano Research 2024年第7期17卷 6518-6526页

作者： Zhaoyang Wang Jianhua Liu Ziyu Wang Chang Liu Qingyu Chen Chaofan Zhang Wenbo Zhang Jicang Si Xiu Xiao Peng Xu Minyi Xu Dalian Key lab of Marine Micro/Nano Energy and Self-powered System Marine Engineering CollegeDalian Maritime UniversityDalian 116026China Information Science and Technology College Dalian Maritime UniversityDalian 116026China Navigation College Dalian Maritime UniversityDalian 116026China Intelligent Biomimetic Design lab College of EngineeringPeking UniversityBeijing 100871China

Due to the excellent maneuverability and obstacle crossing of legged robots,it is possible for an autonomous legged wallclimbing robots to replace manual inspection of ship exterior ***,when the magnetic adsorption legged wallclimbing robot steps on the convex point or convex line of the wall,or even when the robot missteps,the robot is likely to detach from the ferromagnetic ***,this paper proposes a tactile sensor for the legged magnetic adsorption wall-climbing robot to detect the magnetic adsorption state and improve the safety of the autonomous crawling of the *** tactile sensor mainly comprises a three-dimensional(3D)-printed shell,a tactile slider,and three isometric sensing units,with an optimized *** experiment shows that the triboelectric tactile sensor can monitor the sliding depth of the tactile slider and control the light-emitting device(LED)signal *** addition,in the demonstration experiment of detecting the adsorption state of the robot's foot,the triboelectric tactile sensor has strong adaptability to various ferromagnetic wall ***,this study establishes a robot gait control system to verify the feedback control ability of the triboelectric tactile *** results show that the robot equipped with the triboelectric tactile sensor can recognize the dangerous area on the crawling wall and autonomously avoid the ***,the proposed triboelectric tactile sensor has great potential in realizing the tactile sensing ability of robots and enhancing the safety and intelligent inspection of ultra-large vessels.

关键词： legged wall-climbing robot ship inspection tactile perception triboelectric sensor

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rh(Ⅱ)-catalyzed intermolecular carboamination of pyridines via double Csp^(2)-H bond activations

引用

Science China Chemistry 2024年第1期67卷 374-382页

作者： Zhongfeng Luo Jingxing Jiang Lifang Zou Xiaoyu Zhou Junshan Liu Zhuofeng Ke Fengjuan Chen Huanfeng Jiang Wei Zeng Key laboratory of Functional Molecular engineering of Guangdong Province School of Chemistry and Chemical EngineeringSouth China University of TechnologyGuangzhou 510641China School of Materials Science and engineering PCFM LabSun Yat-sen UniversityGuangzhou 510275China Guangdong Provincial Key laboratory of Chinese Medicine Pharmaceutics School of Traditional Chinese MedicineSouthern Medical UniversityGuangzhou 510515China

We disclose the development of the Rh-catalyzed amine-directed remote 5,6-carboamination protocol of pyridines via dual Csp^(2)-H functionalizations.A variety of readily available 2-aminopyridines and 1,2,3-triazoles are allowed for coupling cyclization to access polyfunctionalized *** studies including DFT calculations unveil that relay carbenoidelectrophilic addition to pyridines and the sequential pyridyl Csp^(2)-H amination are involved in this *** postsynthetic utility of this methodology is showcased by versatile and site-selective modification of azaindoles.

关键词： Rh-catalysis azaindoles pyridyl Csp^(2)-H bond carboamination coupling-cyclization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：