检索结果-南通市图书馆

MgO-attached graphene nanosheet(MgO@GNS)reinforced magnesium matrix nanocomposite with superior mechanical,corrosion and biological performance

引用

International Journal of Minerals,Metallurgy and Materials 2024年第9期31卷 2062-2076页

作者： S.Abazari A.Shamsipur H.R.Bakhsheshi-Rad M.S.Soheilirad F.Khorashadizade S.S.Mirhosseini Department of Materials and Metallurgical Engineering Amirkabir University of TechnologyTehran ***Iran Iranian National Standards Organization of hormozgan HormozganIran Advanced Materials Research Center Department of Materials EngineeringNajafabad BranchIslamic Azad UniversityNajafabadIran Department of Materials and Metallurgical Engineering Iran University of Science and TechnologyTehranIran

Magnesium(Mg)alloys are gaining great consideration as body implant materials due to their high biodegradability and ***,they suffer from low corrosion resistance and antibacterial *** this research,semi-powder metallurgy followed by hot extrusion was utilized to produce the magnesium oxide@graphene nanosheets/magnesium(MgO@GNS/Mg)composite to improve mechanical,corrosion and cytocompatibility *** have revealed that the incorporation of MgO@GNS nanohybrids into Mg-based composite enhanced microhardness and compressive *** vitro,osteoblast cell culture tests show that using MgO@GNS nanohybrid fillers enhances osteoblast adhesion and apatite *** presence of MgO@GNS nanoparticles in the composites decreased the opening defects,micro-cracks and micro-pores of the composites thus preventing the penetration of the corrosive solution into the *** demonstrated that the MgO@GNS/Mg composite possesses excellent antibacterial properties because of the combination of the release of MgO and physical damage to bacterium membranes caused by the sharp edges of graphene nanosheets that can effectively damage the cell wall thereby facilitating penetration into the bacterial lipid ***,the MgO@GNS/Mg composite with high mechanical strength,antibacterial activity and corrosion resistance is considered to be a promising material for load-bearing implant applications.

关键词： metal matrix composites MgO@GNS nanohybrid strengthening mechanisms antibacterial activity biocompatibility

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An Overview of PRP-Delivering Scaffolds for Bone and Cartilage Tissue Engineering

引用

Journal of Bionic Engineering 2024年第2期21卷 674-693页

作者： Somayeh Baghersad Behzad Bolandi Rana Imani Shabnam Afaghi Samira Davoudinia Department of Textile Engineering Amirkabir University of Technology(Tehran Polytechnic)Tehran159163-4311Iran Department of Biomedical Engineering Amirkabir University of Technology(Tehran Polytechnic)Tehran159163-4311Iran

Tissue engineering is nowadays an emerging approach that aims to replace or regenerate diseased or damaged organs with engineered constructs. Considering the key role of growth factors (GFs) in the tissue regeneration process, these biomolecules are considered an important part of the tissue engineering process, so the presence of growth factors in engineered scaffolds can accelerate tissue regeneration by influencing the behavior of cells. Platelet-rich plasma (PRP), as an autologous source of a variety of growth factors, is considered a therapeutic agent for the treatment of degenerative diseases. Regarding its ability to promote the healing process and tissue regeneration, PRP therapy has attracted great attention in bone and cartilage tissue engineering. Incorporating PRP and its derivatives into engineered scaffolds not only bioactivates the scaffold, but the scaffold matrix also acts as a sustained and localized growth factor release system. In addition, the presence of a scaffold can promote the bioactivity of GFs by providing an environment that facilitates their interaction, leading to enhanced effects compared to their free form. This review presents a brief overview of PRP's role in bone and cartilage tissue regeneration with the main focus on scaffold-mediated PRP delivery. In addition, the classification of platelet-rich products, current extraction techniques, terminology, and scaffold bioactivation methods are presented to provide a better understanding of the basics and the key aspects that may affect the effectiveness of therapy in bone and cartilage tissue engineering.

关键词： Platelet-rich plasma Growth factors delivery Scaffold Bone Cartilage

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Finite element model updating for structural damage detection using transmissibility data

引用

Earthquake Engineering and Engineering Vibration 2024年第1期23卷 87-101页

作者： Ahmad Izadi Akbar Esfandiari Department of Maritime Engineering Amirkabir University of TechnologyTehran 15875-4413Iran

This paper presents a new finite element model updating method for estimating structural parameters and detecting structural damage location and severity based on the structural responses(output-only data).The method uses the sensitivity relation of transmissibility data through a least-squares algorithm and appropriate normalization of the extracted *** proposed transmissibility-based sensitivity equation produces a more significant number of equations than the sensitivity equations based on the frequency response function(FRF),which can estimate the structural parameters with higher *** abilities of the proposed method are assessed by using numerical data of a two-story two-bay frame model and a plate structure *** evaluating different damage cases,the number,location,and stiffness reduction of the damaged elements and the severity of the simulated damage have been accurately *** reliability and stability of the presented method against measurement and modeling errors are examined using error-contaminated *** parameter estimation results prove the method’s capabilities as an accurate model updating algorithm.

关键词： damage detection model updating output-only transmissibility sensitivity equation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

环氧树脂涂层中添加含铝复合粉增强碳钢基材的防腐性

引用

Journal of Central South university 2024年第3期31卷 723-736页

作者： Meysam TOOZANDEHJANI Pooria MOOZARM NIA Ebrahim ABOUZARI LOTF Farhad OSTOVAN Mahnaz SHAMSHIRSAZ New Technologies Research Center Amirkabir University of TechnologyTehran Polytechnic424 Hafez Ave.P.B.15875-4413TehranIran Section for Surface Physics and Catalysis Department of PhysicsTechnicFysikvejBygning 311Kongens LyngbyDK-2800Denmark Institute of Nanotechnology and Institute of Quantum Materials and technology Karlsruhe Institute of TechnologyP.O.Box 364076021 KarlsruheGermany Department of Materials Science and Engineering Bandar Abbas BranchIslamic Azad UniversityBandar AbbasIran

采用电化学阻抗谱(EIS)和电位极化(Tafel)试验,研究了在环氧树脂涂层中添加含铝粉末以增强碳钢基材的防腐性,含铝粉末包括纯铝、Al/CNT、Al/Al_(2)O_(3)、Al/CNT/Al_(2)O_(3)。用球磨法合成含2 wt.%碳纳米管、2 wt.%氧化铝纳米颗粒的复... 详细信息

采用电化学阻抗谱(EIS)和电位极化(Tafel)试验,研究了在环氧树脂涂层中添加含铝粉末以增强碳钢基材的防腐性,含铝粉末包括纯铝、Al/CNT、Al/Al_(2)O_(3)、Al/CNT/Al_(2)O_(3)。用球磨法合成含2 wt.%碳纳米管、2 wt.%氧化铝纳米颗粒的复合粉末,然后以1 wt.%的浓度加入到环氧树脂涂层中。结果表明,由于环氧树脂复合涂层的防护性能增强,从而提高了其耐腐蚀性。研究还发现,Al/CNT/Al_(2)O_(3)复合添加剂的保护性能比其他添加剂更显著,因为其颗粒尺寸的减小和具有某些形状的颗粒,进一步减少了腐蚀环境通过涂层渗透的路径,避免了金属基底/涂层界面可能发生的反应。EP-Al/CNT/Al_(2)O_(3)保持了一次时间常数特性,并在整个暴露时间内表现出最高的阻抗和最强的稳定性。这些添加剂的存在增强了涂层,从而改善了涂层的屏障性能。

关键词：铝复合材料环氧树脂复合材料涂层腐蚀电化学阻抗图谱(EIS) Tafel极化

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Time-dependent effects in transient liquid phase bonding of 304L and Cp-Ti using an Ag-Cu interlayer

引用

Journal of Central South university 2024年第7期31卷 2237-2255页

作者： Saeed VAZIRIAN Mohammad MOSHKBAR BAKHSHAYESH Ali FARZADI Department of Materials and Metallurgical Engineering Amirkabir University of Technology(Tehran Polytechnic)Tehran 15916-34311Iran

One of the challenges for bimetal manufacturing is the joining ***,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm for bonding time of 20,40,60,and 90 *** bonding temperature of 860℃ was considered,which is under the β transus temperature of *** TLP bonding,various intermetallic compounds(IMCs),including Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe),Ti_(2)(Cu,Ag),and Ti_(2)Cu from 304L toward Cp-Ti formed in the ***,on the one side,with the increase in time,further diffusion of elements decreases the blocky IMCs such as Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe)in the 304L diffusion-affected zone(DAZ)and reaction zone,and on the other side,Ti_(2)(Cu,Ag)IMC transformed into fine morphology toward Cp-Ti *** microhardness test also demonstrated that the(Cr,Fe)_(2)Ti+Ti_(5)Cr_(7)Fe_(17) IMCs in the DAZ on the side of 304L have a hardness value of HV 564,making it the hardest *** maximum and minimum shear strength values are equal to 78.84 and 29.0 MPa,*** cleavage pattern dominated fracture surfaces due to the formation of brittle phases in dissimilar joints.

关键词： diffusion brazing transient liquid phase bonding dissimilar material joints microstructural evolution mechanical properties grade 2 titanium

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

An Efficient Approach to Escalate the Speed of Training Convolution Neural Networks

引用

China Communications 2024年第2期21卷 258-269页

作者： P Pabitha Anusha Jayasimhan Department of Computer technology Anna UniversityMadras Institute of Technology CampusChennai 600044India

Deep neural networks excel at image identification and computer vision applications such as visual product search, facial recognition, medical image analysis, object detection, semantic segmentation,instance segmentation, and many others. In image and video recognition applications, convolutional neural networks(CNNs) are widely employed. These networks provide better performance but at a higher cost of computation. With the advent of big data, the growing scale of datasets has made processing and model training a time-consuming operation, resulting in longer training times. Moreover, these large scale datasets contain redundant data points that have minimum impact on the final outcome of the model. To address these issues, an accelerated CNN system is proposed for speeding up training by eliminating the noncritical data points during training alongwith a model compression method. Furthermore, the identification of the critical input data is performed by aggregating the data points at two levels of granularity which are used for evaluating the impact on the model *** experiments are conducted using the proposed method on CIFAR-10 dataset on ResNet models giving a 40% reduction in number of FLOPs with a degradation of just 0.11% accuracy.

关键词： CNN deep learning image classification model compression

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Resilence Control of DC Microgrid Integrated with Multi-Nanogrids Considering Connected-Islanded States

引用

CSEE Journal of Power and Energy Systems 2024年第2期10卷 786-796页

作者： Hossien Faraji Reza Hemmati Pierluigi Siano Department of Electrical Engineering Amirkabir University of TechnologyTehranIran Department of Electrical Engineering Kermanshah University of TechnologyKermanshahIran Department of Management&Innovation Systems University of Salernoand also with the Department of Electrical and Electronic Engineering ScienceUniversity of JohannesburgJohannesburg 2006South Africa

In this paper, a DC microgrid (DCMG) integrated with a set of nano-grids (NG) is studied. DCMG exchanges predetermined active and reactive power with the upstream network. DCMG and NGs are coordinately controlled and managed in such a way the exchanged P-Q power with external grid are kept on scheduled level following all events and operating conditions. The proposed control system, in addition to the ability of mutual support between DCMG and NGs, makes NGs support each other in critical situations. On the other hand, in all operating conditions, DCMG not only feeds three-phase loads with time-varying active and reactive power on the grid side but also injects constant active power into the grid. During events, NGs support each other, NGs support DCMG, and DCMG supports NGs. Such control strategies are realized by the proposed control method to increase resilience of the system. For these purposes, all resources and loads in DCMG and NGs are equipped with individual controllers. Then, a central control unit analyzes, monitors, and regularizes performance of individual controllers in DCMG and NGs. Nonlinear simulations show the proposed model can effectively control DCMG and NGs under normal and critical conditions.

关键词： Control system DC microgrid nanogrid resilience

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Studying the effect of surfactant assisted low-salinity water flooding on clay-rich sandstones

引用

Petroleum 2024年第2期10卷 306-318页

作者： Saeed Khezerloo-ye Aghdam Alireza Kazemi Mohammad Ahmadi Department of Petroleum Engineering Amirkabir University of Technology (AUT) Department of Petroleum and Chemical Engineering College of Engineering Sultan Qaboos University

Sandstone reservoirs often contain clay particles that can cause damage and reduce permeability during low-salinity water flooding. In this study, the effect of surfactants on fine migration in clay-rich sandstones and its impact on oil recovery was ***, the impact of surfactants on interparticle forces in fine-matrix, fine-fine, and oil-matrix systems was modeled. The results showed that both CTAB(cetyltrimethyl ammonium bromide) and QS(quillaja saponin) cause EDL compaction, weakening the repulsive forces. However, SDS(sodium dodecyl sulfate)and TX(triton X-100) do not affect the EDL. Next, the effect of surfactants on IFT reduction and wettability alteration was experimentally investigated. All surfactants reduced IFT due to the surface excessive concentration mechanism. The wettability alteration experiment illustrated that although QS and CTAB compact EDL around oil and matrix particles leading to attraction force augmentation, they both alter wettability through adsorption on matrix and carboxylic groups present in crude oil, *** aqueous solutions were then injected into various clay-rich sandstone sanpacks, which resulted in increased oil recovery. However, the mechanisms leading to enhanced oil recovery variedby surfactant type. CTAB increased recovery by 10% through IFT reduction and wettability alteration, while SDS and TX increased recovery by 12% and 9%, respectively, through wettability alteration and extreme fine migration. In contrast, partial fine migration in the QS flooding experiment reached a recovery increase of 18%. Permeability trends through experiments were also recorded. During CTAB injection,permeability did not reduce, while QS aqueous solution reduced rock permeability to 5 m D. SDS and TX reduced the magnitude of permeability to 2 m *** conclusion, this study demonstrates that surfactants can effectively improve oil recovery in clay-rich sandstones by altering the interparticle forces, reducing IFT, a

关键词： Surfactant flooding Smart water Fine migration Recovery factor

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

On dry machining of AZ31B magnesium alloy using textured cutting tool inserts

引用

Journal of Magnesium and Alloys 2024年第4期12卷 1608-1618页

作者： Shailendra Pawanr Kapil Gupta Department of Mechanical and Industrial Engineering technology University of JohannesburgDoornfontein CampusJohannesburg 2028 South Africa

Magnesium alloys have many advantages as lightweight materials for engineering applications,especially in the fields of automotive and *** undergo extensive cutting or machining while making products out of *** cutting,a sustainable machining method,causes more friction and adhesion at the tool-chip *** of the promising solutions to this problem is cutting tool surface texturing,which can reduce tool wear and friction in dry cutting and improve machining *** paper aims to investigate the impact of dimple textures(made on the flank face of cutting inserts)on tool wear and chip morphology in the dry machining of AZ31B magnesium *** results show that the cutting speed was the most significant factor affecting tool flank wear,followed by feed rate and cutting *** tool wear mechanism was examined using scanning electron microscope(SEM)images and energy dispersive X-ray spectroscopy(EDS)analysis reports,which showed that at low cutting speed,the main wear mechanism was abrasion,while at high speed,it was *** chips are discontinuous at low cutting speeds,while continuous at high cutting *** dimple textured flank face cutting tools facilitate the dry machining of AZ31B magnesium alloy and contribute to ecological benefits.

关键词： Magnesium alloy Dry machining Textured tools Flank wear Sustainability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Detailed analysis of the relativistic configuration of Bardeen anisotropic spheres in modified f(G)gravity

引用

Communications in Theoretical Physics 2024年第6期76卷 45-56页

作者： Adnan Malik Ayesha Almas Tayyaba Naz Rubab Manzoor M Z Bhatti School of Mathematical Sciences Zhejiang Normal UniversityJinhuaZhejiangChina Department of Mathematics University of Management and TechnologySialkot CampusLahorePakistan National university of Computer and Emerging Sciences Lahore CampusPakistan Department of Mathematics University of Management and TechnologyJohar Town CampusLahore 54782Pakistan Department of Mathematics University of the PunjabQuaid-i-Azam CampusLahore-54590Pakistan

The aim of this work is to investigate anisotropic compact objects within the framework of f(G)modified theory of *** our present work,we utilize Krori-Barua metrics,i.e.,λ(r)=Xr^(2)+Y andβ(r)=Zr^(2).We use some matching conditions of spherically symmetric spacetime with Bardeen's model as an exterior ***,we establish some expressions of energy density and pressure components to analyze the stellar configuration of Bardeen compact stars by assuming viable f(G)*** examine the energy conditions for different stellar structures to verify the viability of our considered ***,we also investigate some other physical features,such as equilibrium condition,equation of state parameters,adiabatic index,stability analysis,mass function,surface redshift,and compactness factor,*** is worthwhile to mention here for the current study that our stellar structure in the background of Bardeen's model is more viable and stable.

关键词： Bardeen compact stars f(G)modified gravity Krori-Barua potential

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：