检索结果-南通市图书馆

Semi-quantitative analysis of the structural evolution of mesophase pitch-based carbon foams by Raman and FTIR spectroscopy

在线全文

学校读者我要写书评

暂无评论

新型炭材料（中英文） 2024年第4期39卷 668-680页

作者： LIU Yue CHANG Sheng-kai SU Zhan-peng HUANG Zu-jian QIN Ji YANG Jian-xiao Hunan Province Key Laboratory for Advanced Carbon materials and applied Technology College of Materials Science and EngineeringHunan UniversityChangsha410082China

Graphitized carbon foams(GFms)were prepared using mesophase pitch(MP)as a raw material by foaming(450℃),pre-oxidation(320℃),carbonization(1000℃)and graphitization(2800℃).The differences in structure and properties of GFms prepared from different MP precursors pretreated by ball milling or liquid phase extraction were investigated and compared,and semi-quantitative calculations were conducted on the Raman and FTIR spectra of samples at each preparation ***-quantitat-ive spectroscopic analysis provided detailed information on the structure and chemical composition changes of the MP and GFm de-rived from *** with microscopic observations,the change from precursor to GFm was *** results showed that ball milling concentrated the distribution of aromatic molecules in the pitch,which contributed to uniform foaming to give a GFm with a uniform pore distribution and good *** phase extraction helped remove light components while retaining large aromatics to form graphitic planes with the largest average size during post-treatment to produce a GFm with the highest degree of graphitization and the fewest open pores,giving the best compression resistance(2.47 MPa),the highest thermal conductivity(64.47 W/(m·K))and the lowest electrical resistance(13.02μΩ·m).Characterization combining semi-quantitative spectroscopic ana-lysis with microscopic observations allowed us to control the preparation of the MP-derived GFms.

关键词： Mesophase pitch Carbon foams Raman FTIR Graphitization

Interface engineering strategy via electron-defect trimethyl borate additive toward 4.7 V ultrahigh-nickel LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)battery

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第5期92卷 639-647页

作者： Yilin Zhang Yuqing Chen Qiu He Jinlong Ke Wei Wang Jian-Fang Wu Peng Gao Yanhua Li Jilei Liu College of materials science and Engineering Hunan Joint International Laboratory of Advanced Materials and Technology for Clean EnergyHunan Province Key Laboratory for Advanced Carbon Materials and Applied TechnologyHunan UniversityChangsha 410082HunanChina College of materials science and Engineering Sichuan UniversityChengdu 610065SichuanChina School of materials science and Engineering Hunan Institute of TechnologyHengyang 421002HunanChina

The Li metal battery with ultrahigh-nickel cathode(LiNi_(x)M_(1-x)O_(2),M=Mn,Co,and x≥0.9)under high-voltage is regarded as one of the most promising approaches to fulfill the ambitious target of 400 Wh/***,the practical application is impeded by the instability of electrode/electrolyte interface and Ni-rich cathode *** we proposed an electron-defect electrolyte additive trimethyl borate(TMB)which is paired with the commercial carbonate electrolyte to construct highly conductive fluorine-and boron-rich cathode electrolyte interface(CEI)on LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)(NCM90)surface and solid electrolyte interphase(SEI)on lithium metal *** modified CEI effectively mitigates the structural transformation from layered to disordered rock-salt phase,and consequently alleviate the dissolution of transition metal ions(TMs)and its“cross-talk”effect,while the enhanced SEI enables stable lithium plating/striping and thus demonstrated good compatibility between electrolyte and lithium metal *** a result,the common electrolyte with 1 wt%TMB enables 4.7 V NCM90/Li cell cycle stably over 100 cycles with 70%capacity *** work highlights the significance of the electron-defect boron compounds for designing desirable interfacial chemistries to achieve high performance NCM90/Li battery under high voltage operation.

关键词： NCM90 batteries Electrolyte additive Trimethyl borate

Advances in large viewing angle and achromatic 3D holography

在线全文

学校读者我要写书评

暂无评论

Light(science & Applications) 2024年第7期13卷 1224-1225页

作者： Jiaming Huang Yu Chen Guixin Li Department of materials science and Engineering Southern University of Science and TechnologyShenzhen 518055China Institute for applied Optics and Precision Engineering Southern University of Science and TechnologyShenzhen 518055China

Optical holography is a promising technique to achieve a naked-eye 3D ***,the narrow viewing angle and chromatic aberration are the two key issues that usually limit the holographic display performance.A recent work proposes a novel way to circumvent these constraints by introducing a color liquid crystal grating into a timesequenced holography system.

关键词： angle chromatic holographic

Dynamic recrystallization behavior and strengthening mechanism of a novel Mo-Ti3AlC2 alloy at ultrahigh temperature

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3946-3960页

作者： Lu Yang Xin-Yuan Zheng Yang Zhao Xi-Ran Wang Fang-Nao Xiao Shi-Zhong Wei School of materials science and Engineering Henan University of Science and Technology National Joint Engineering Research Center for Abrasion Control and Molding of Metal materials Henan University of Science and Technology Department of applied Mechanics Univ.Bourgogne FrancheComteFEMTO-ST InstituteCNRS/UF/ENSMM/UTBM

Increasing the recrystallization temperature to achieve better high-temperature performance is critical in the development of molybdenum alloys for ultrahightemperature applications,such as the newest generation of multitype high-temperature nuclear *** this study,an innovative strategy was proposed to improve the performance of molybdenum alloys at high temperature by using the two-dimensional MAX（where M is an early transition metal,A is an A-group element and X is C or N）ceramic material *** relationships between flow stress,strain rate and temperature were *** microstructure,distribution of misorientation and evolution of dislocations in the Mo-Ti3AlC2alloy were *** microscopic mechanism of the Ti3AlC2phase in the molybdenum alloy at high temperatures was *** experimental results showed that the peak flow stress of Mo-Ti3AlC2at 1600℃ reached 155 MPa,which was161.8% greater than that of pure *** activation energy of thermal deformation of Mo-Ti3AlC2was as large as537 kJ·mol-1,which was 17.6% more than that of pure *** recrystallization temperature reached 1600℃ or even *** topological reaction of the Ti3AlC2phase consumed a large amount of energy at high temperatures,resulting in increases in the deformation activation *** structures of AlTi3and Ti-O Magneli-phase oxides(Ti_nO2n-1) were formed in-situ,which relied on kink bands and interlayer slip,resulting in many dislocations during ***,the special two-dimensional of the structure Ti3AlC2ceramic inhibited the recrystallization behavior of the Mo *** results of this study can provide theoretical guidance for the development of a new generation of molybdenum alloys for use in ultrahigh-temperature environments.

关键词： Mo alloy Two-dimensional reinforcement Dynamic recrystallization behavior Hot deformation Mechanical properties

Waste acid recovery utilizing monovalent cation permselective membranes through selective electrodialysis

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第7期71卷 45-57页

作者： Yanran Zhu Yue Zhou Qian Chen Rongqiang Fu Zhaoming Liu Liang Ge Tongwen Xu Anhui Provincial Engineering Laboratory of Functional Membrane materials and Technology Department of Applied ChemistrySchool of Chemistry and Materials ScienceUniversity of Science and Technology of ChinaHefei 230026China Key Laboratory of Charged Polymeric Membrane materials of Shandong Province Shandong Tianwei Membrane Technology Co.Ltd.Weifang 261000China

Selective electrodialysis(SED)has surfaced as a highly promising membrane separation technique in the realm of acid recovery owing to its ability to effectively separate monovalent ions through the utilization of a potential ***,the current SED process is limited by conventional commercial monovalent cation permselective membranes(MCPMs).This study systematically investigates the use of an independently developed MCPM in the SED process for acid *** factors such as current density,volume ratio,initial ion concentration,and waste acid systems are *** independently developed MCPM offers several advantages over the commercial monovalent selective cation-exchange membrane(CIMS),including higher recovered acid concentration,better ion flux ratio,improved acid recovery efficiency,increased recovered acid purity,and higher current *** SED process with the MCPM achieves a recovered acid of 95.9%and a concentration of 2.3 mol·L^(–1) in the HCl/FeCl_(2) system,when a current density of 20 mA·cm^(-2) and a volume ratio of 1:2 are ***,in the H_(2)SO_(4)/FeSO_(4) system,a purity of over 99%and a concentration of 2.1 mol·L^(–1) can be achieved in the recovered *** study thoroughly examines the impact of operation conditions on acid recovery performance in the SED *** independently developed MCPM demonstrates outstanding acid recovery performance,highlighting its potential for future commercial utilization.

关键词： Selective electrodialysis Wastewater Monovalent cation permselective membranes Separation Recovery

An intermittent lithium deposition model based on CuMnbimetallic MOF derivatives for composite lithium anode with ultrahigh areal capacity and current densities

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2763-2769页

作者： Tao Wei Yanyan Zhou Cheng Sun Xingtong Guo Shoudong Xu Daifen Chen Yongfu Tang School of Energy and Power Jiangsu University of Science and TechnologyZhenjiang 212003China State Key Laboratory of Metastable materials science and Technology(MMST) Hebei Key Laboratory of Applied ChemistryYanshan UniversityQinhuangdao 066004China College of materials science and Engineering Taiyuan University of TechnologyTaiyuan 030024China

Recently,three-dimensional(3D)conductive frameworks have been chosen as the host for composite lithium(Li)metal anode because of their exceptional electrical conductivity and remarkable thermal and electrochemical ***,Li tends to accumulate on the top of the 3D frameworks with homogenous lithiophilicity and Li dendrite still *** work firstly designed a bimetallic metal-organic framework(MOF)(CuMn-MOF)derived Cu_(2)O and Mn_(3)O_(4) nanoparticles decorated carbon cloth(CC)substrates(CC@Cu_(2)O/Mn_(3)O_(4))to fabricate a composite Li *** to the synergistic effects of lithiophilic Cu_(2)O and Mn_(3)O_(4),the CC@Cu_(2)O/Mn_(3)O_(4)@Li symmetrical cell can afford a prolonged cycling lifespan(1400 h)under an ultrahigh current density and areal capacity(6 mA·cm^(-2)/6 mAh·cm^(-2)).When coupled with the LiFePO_(4)(LFP)cathode,the LFP||CC@Cu_(2)O/Mn_(3)O_(4)@Li full cell demonstrated a superior performance of 89.7 mAh·g^(-1) even at an extremely high current density(10 C).Furthermore,it can also be matched well with LiNi_(0.5)Co^(0).2Mn_(0.3)O_(2)(NCM523)***,to explain the excellent performances of the CC@Cu_(2)O/Mn_(3)O_(4)@Li composite anode,an intermittent model was also *** study offers a novel model that can enhance our comprehension of the Li deposition behavior and pave the way to attain stable and safe Li metal anodes by employing bimetallic MOF-derived materials to construct 3D frameworks.

关键词： lithium metal anode(LMA) three-dimensional(3D)frameworks intermittent lithiophilic model high areal capacity bimetallic metal-organic frameworks(MOFs)

Facile Synthesis of Polyisothioureas via Alternating Copolymerization of Aziridines and Isothiocayanates

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer science 2024年第3期42卷 292-298,I0005页

作者： Hao-Tian Zhang Ming-Xin Niu Qi Zhang Chen-Yang Hu Xuan Pang Key Laboratory of Polymer Ecomaterials Changchun Institute of Applied ChemistryChinese Academy of SciencesChangchun 130022China Department of materials science and Engineering Jilin UniversityChangchun 130025China School of applied Chemistry and Engineering University of Science and Technology of ChinaHefei 230026China

Isothiourea is an important class of sulfur-containing molecules showing unique catalytic and biological activities. As such,polyisothiourea is envisioned to be an interesting type of polymer that potentially exhibits a number of interesting properties. However, there is no access to synthesizing well-defined polyisothiourea, and currently isothiourea-containing polymers are mainly prepared by immobilizing onto other polymer's side chain. Herein, we report the first facile synthesis of polyisothioureas via alternating copolymerization of aziridines and isothiocayanates. Mediated by the catalytic system of phosphazene superbases/alcohol, a broad scope of aziridines and isothiocayanates could be transformed into polyisothioureas with adjustable substitutions(11 examples). The structures of obtained polyisothioureas were fully characterized with ^(1)H-NMR, ^(13)C-NMR, and ^(1)H-^(13)C HMBC NMR. Moreover, the polyisothioureas show tunable thermal properties depending on substitutions on the isothiourea linkages. The novel structure of these polyisothioureas will enable a powerful platform for the discovery of nextgeneration functional plastics.

关键词： Polyisothioureas Alternative copolymer Aziridines Isothiocayanates

Li-air batteries:air stability of lithium metal anodes

在线全文

学校读者我要写书评

暂无评论

science China Chemistry 2024年第1期67卷 122-136页

作者： Renfei Cao Kai Chen Jianwei Liu Gang Huang Wanqiang Liu Xinbo Zhang School of materials science and Engineering Changchun University of Science and TechnologyChangchun 130022China State Key Laboratory of Rare Earth Resource Utilization Changchun Institute of Applied ChemistryChangchun 130022China

Aprotic rechargeable lithium-air batteries(LABs)with an ultrahigh theoretical energy density(3,500 Wh kg^(-1))are known as the‘holy grail’of energy storage systems and could replace Li-ion batteries as the next-generation high-capacity batteries if a practical device could be ***,only a few researches focus on the battery performance and reactions in the ambient air environment,which is a major obstacle to promote the practical application of ***,we have summarized the recent research progress on LABs,especially with respect to the Li metal *** chemical and electrochemical deteriorations of the Li metal anode under the ambient air are discussed in detail,and the parasitic reactions involving the cathode and electrolyte during the charge-discharge processes are *** also provide stability perspectives on protecting the Li metal anodes and propose design principles for realizing high-performance LABs.

关键词： parasitic reaction lithium metal anode anode protection Li-air batteries

On-Chip Micro Temperature Controllers Based on Freestanding Thermoelectric Nano Films for Low-Power Electronics

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第7期16卷 98-108页

作者： Qun Jin Tianxiao Guo Nicolas Perez Nianjun Yang Xin Jiang Kornelius Nielsch Heiko Reith Institute for Metallic materials Leibniz Institute for Solid State and Materials Research01069 DresdenGermany Institute of materials Engineering University of Siegen57076 SiegenGermany Institute of applied Physics Technical University of Dresden01069 DresdenGermany Institute of materials science Technical University of Dresden01069 DresdenGermany

Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern ***,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely ***,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane *** tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are *** proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.

关键词： Temperature control Low-power electronics On-chip micro temperature controller Freestanding thermoelectric nano films Temperature-sensitive components