检索结果-南通市图书馆

Direct ink writing of polycaprolactone/polyethylene oxide based 3D constructs

在线全文

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2021年第2期31卷 180-191页

作者： Bin Zhang Se Hun Chung Susan Barker Duncan Craig Roger J.Narayan Jie Huang Department of Mechanical Engineering University College London Medway School of Pharmacy Universities of Greenwich and Kent School of Pharmacy University College London Joint Department of Biomedical Engineering University of North Carolina and North Carolina State University

There has been increasing interest over recent years in the application of three-dimensional(3 D) printing technologies in the biomedical field. One such method is Direct Ink Writing(DIW); this approach has the potential advantage of allowing room-temperature deposition of materials, presented as an ink, to build complex architectures. DIW offers the ability to process biomaterials containing temperature-sensitive components. Due to the fabrication principles of DIW, there are specific rheological requirements that the ink must exhibit for the 3 D construction. For this reason, hydrogel-based liquid feed stocks have been the focal point of ink development. As a consequence, studies based on inks comprising hydrophobic biomaterials, which are insoluble in water and hence unsuited to the hydrogel approach, have been *** this study, we investigate novel inks that utilize polycaprolactone(PCL), a hydrophobic polymer, as the primary constituent by dissolving the polymer in solvent systems based on dichloromethane(DCM) and acetone(ACE). Moreover, polyethylene oxide(PEO) was incorporated into the PCL systems in order to extend the range of hydrophilicity of the systems. The rheological properties of the inks were investigated as a function of polymer composition and solvent system. Woodpile constructs of PCL and PCL/PEO were fabricated using DIW method and were assessed by a series of material characterisation. The type of solvent system had a noticeable impact on the ink rheology, which ultimately affected the surface properties. The incorporation of PEO particularly enhanced the roughness and wettability of the constructs. Our results support the use of DIW as a new means to process hydrophobic polymers for biomedical applications.

关键词： Direct ink writing polycaprolactone Polyethylene oxide Ink rheology Material characterisation 3D construct

polycaprolactone/polyvinyl pyrrolidone nanofibers developed by solution blow spinning for encapsulation of chlorogenic acid

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Food Quality and Safety 2022年第2期6卷 265-274页

作者： Yang Cao Chaoyi Shen Zhichao Yang Zihan Cai Zian Deng Di Wu The Rural Development Academy Zhejiang UniversityHangzhouChina College of Biosystems Engineering and Food Science Zhejiang UniversityHangzhouChina College of Agriculture&Biotechnology Zhejiang UniversityHangzhouChina and Zhejiang University Zhongyuan Institute ZhengzhouChina

Study on the application of nanofibers in food active packaging has been a research hotspot in recent *** this work,solution blow spinning(SBS)was applied to rapidly fabricate the polycaprolactone(PCL),polyvinyl pyrrolidone(PVP),and PCL/PVP nanofibrous films to encapsulate chlorogenic acid(CGA).All films showed uniform and smooth nanofibers,and the Fourier transform infrared spectroscopy and X-ray diffraction proved the success of mixed spinning of PCL and *** the increase of PVP content,the thermal stability of the PCL/PVP nanofibrous films *** PCL/PVP(weight ratio of 4:1)film possessed better mechanical properties than PCL and PVP films be-cause of the stronger fiber-fiber *** addition of PCL endowed the hydrophobic surfaces to the PCL/PVP films,and the PCL/PVP films had better water vapor barrier *** PCL/PVP(4:1)film exhibited the best long-term continuous release of CGA during 72 *** PVP nanofibrous film exhibited no inhibition against Staphylococcus aureus and Escherichia coli due to the low encapsulation efficiency,but the PCL and PCL/PVP films exhibited good antimicrobial *** above results suggested that the nanofibrous fims developed by SBS possess promising prospects in food packaging.

关键词： Solution blow spinning polycaprolactone polvinyl prrolidone chlorogenic acid long-term continuous release

polycaprolactone/polysaccharide functional composites for lowtemperature fused deposition modelling

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bioactive Materials 2020年第2期5卷 185-191页

作者： Yu-Qing Zhao Ji-Hao Yang Xiaokang Ding Xuejia Ding Shun Duan Fu-Jian Xu State Key Laboratory of Chemical Resource Engineering Key Lab of Biomedical Materials of Natural Macromolecules(Beijing University of Chemical Technology)Ministry of EducationBeijing Laboratory of Biomedical MaterialsBeijing University of Chemical TechnologyBeijing100029China

Fused deposition modelling(FDM)is a commonly used 3D printing *** development of FDM materials was essential for the product quality of *** this work,a series of polycaprolactone(PCL)-based composites for low-temperature FDM were *** melt blending technique,different ratios of starch were added into PCL to improve the performances of FDM,and the printability,tensile strength,rheological properties,crystallization behaviors and biological performances of the composites were *** PCL/starch composite had the best performance in FDM process with the starch ratio of 9 ph at 80–90°*** melting strength and solidification rate of PCL/starch composites were *** starch also increased the crystallization temperature,degree of crystallinity and crystallization rate of PCL/starch composites,while had no negative effects on the tensile strength of *** to the low printing temperature,various kinds of bioactive components were added into PCL/starch composites for preparation of antibacterial and biocompatible materials for *** present work provides a new method to develop novel low-temperature FDM materials with various functions.

关键词： Fused deposition modelling Melt blending polycaprolactone Composite Antibacterial

Surface morphology and cell viability of samarium(Ⅲ) oxide/chromium(Ⅲ) oxide/graphene oxide/polycaprolactone targeting wound dressing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第3期42卷 555-561,I0005页

作者： Muteb H.Alshammari Ahmed Onayzan Alshammari Mohamed Tharwat Elabbasy Rafat Zreiq Faris Mohammed Albati M.A.El-Morsy A.A.Menazea Department of Health Informatics College of Public Health and Health InformaticsUniversity of Ha'ilHa'ilSaudi Arabia Department of Surgery College of MedicineUniversity of Ha'ilHa'ilSaudi Arabia Department of Public Health College of Public Health and HealthInformaticsHalUniversityHa'il2440Saudi Arabi Food Control Department Faculty of Veterinary MedicineZagazig UniversityZagazig44519Egypt Applied Science Research Center Applied Science Private UniversityAmman541350Jordan College of Shariah and Law Ha'il UniversityHa'il2440Saudi Arabia College of Science and Humanities in Al-Kharj Physics DepartmentPlasma Technology and Material Science UnitPrince Sattam Bin Abdulaziz UniversityAl-kharj11942Saudi Arabia Physics Department Faculty of ScienceUniversity of DamittaNew Damietta34517.Egyp Spectroscopy Department Physics Research InstituteNational Research CentreDokki12622GizaEgypt

Combinations of metal and lanthanide oxides have been done through casted films for potential medical applications. In this regard, samarium(Ⅲ) oxide/chromium(Ⅲ) oxide/graphene oxide(GO)/polycaprolactone(PCL) based films nano-composites(NCs) were fabricated, pointing their utilization as a biological scaffold for wound dressing purposes. Also, samarium(Ⅲ) oxide and chromium(Ⅲ) oxide have been merged as promising optical constituents due to their unique optical behavior. The structural and compositional examination of the studied NCs was executed by X-ray diffraction(XRD), Raman, and field emission scanning electron microscopy(FESEM). The Sm_(2)O_(3)/Cr_(2)O_(3)/GO/PCL NC exhibits a surface with a lower roughness degree owing to the presence of GO. Cr_(2)O_(3)shows size reduction upon GO insertion to reach 1.2 μm as the average grain size, whilst Sm_(2)O_(3)records an average grain size of less than 1 μm. As well, the polymeric nano-compositions exhibit variation in contact angle values that hit 29.76°± 3.52°for Sm_(2)O_(3)/PCL, and 48.62°± 1.37°for Sm_(2)O_(3)/Cr_(2)O_(3)/GO/PCL as the second lowest contact angle. The optical behavior contributes to absorption edge relocation along the x-axis from 1.7 eV for pure PCL, to 2.65 eV for Sm_(2)O_(3)/Cr_(2)O_(3)/GO/PCL. Regarding biological responses, the cell exposed to 2.5 μg/m L of Sm_(2)O_(3)/Cr_(2)O_(3)/GO/PCL shows cell viability of 119.31%, while 5 μg/m L hits 99.6%. Additionally, the resulting cell attachment micrographs show layers of fibroblast tissue, besides the proliferation and growth of cultivated cells. Thus, the Sm_(2)O_(3)/Cr_(2)O_(3)/GO/PCL scaffold provides 3D proliferation of fibroblast cells endorsing the wound healing process.

关键词： Wound healing Wound dressing polycaprolactone Sm_(2)O_(3) Cr_(2)O_(3) Rare earths

Nanocomposite Electrospun Scaffold Based on Polyurethane/polycaprolactone Incorporating Gold Nanoparticles and Soybean Oil for Tissue Engineering Applications

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2023年第4期20卷 1712-1722页

作者： Nahideh Asadi Azizeh Rahmani Del Bakhshayesh Hadi Sadeghzadeh Amir Nezami Asl Sharif Kaamyabi Abolfazl Akbarzadeh Department of Medical Nanotechnology Faculty of Advanced Medical SciencesTabriz University of Medical SciencesTabrizIran Department of Tissue Engineering Faculty of Advanced Medical SciencesTabriz University of Medical SciencesTabrizIran Health Research Center Chamran HospitalTehranIran Department of Chemistry Farhangian UniversityTehranIran

Electrospun nanofibers combined with a wide range of functional additives can be used for a various tissue engineering applications due to their desired biomimetic and physicochemical ***,the present study was conducted to obtain a highly efficient nanocomposite electrospun scaffold with appropriate physicochemical performance and biological properties based on polycaprolactone/Polyurethane(PCL/PU)mixed with gold nanoparticles(GNPs)and soybean oil(SO).In the present study,the desired nanofibers were fabricated by electrospinning PCL/PU mixed solution with GNPs and *** nanocomposite electrospun PU/PCL/SO/GNP nanofibers were characterized in terms of chemical composition by attenuated total reflectance-Fourier transform infrared spectroscopy(ATR-FTIR),morphological structure by field-emission scanning electron microscopy(FE-SEM),and mechanical and biological *** surface topography and wettability were determined by atomic force microscopy(AFM)and water contact angle measurements,*** was found that the presence of GNPs along with SO in the structure of PCL/PU nanofiber created a smoother surface in terms of surface roughness and also a more homogeneous fibrous *** addition,it was observed that both SO and GNPs caused an increase in the electrical conductivity of the fibrous *** the biocompatibility evaluations by measuring cell viability and cell adherence to the scaffold's surfaces,it was found that adding of SO and GNPs supports *** together,the fabricated nanocomposite fibrous scaffolds can be a potential candidate for various tissue engineering purposes.

关键词： polycaprolactone Polyurethane Gold nanoparticles Soy oil Bionic

3D-printed Mg-1Ca/polycaprolactone composite scaffolds with promoted bone regeneration

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 966-979页

作者： Xiao Zhao Siyi Wang Feilong Wang Yuan Zhu Ranli Gu Fan Yang Yongxiang Xu Dandan Xia Yunsong Liu Department of Prosthodontics Peking University School and Hospital of StomatologyBeijing 100081China National Center of Stomatology National Engineering Laboratory for Digital and Material Technology of StomatologyNational Clinical Research Center for Oral DiseasesBeijing Key Laboratory of Digital StomatologyResearch Center of Engineering and Technology for Computerized Dentistry Ministry of HealthNMPA Key Laboratory for Dental MaterialsBeijing 100081China Department of Dental Materials Peking University School and Hospital of StomatologyBeijing 100081China

In bone tissue engineering,polycaprolactone(PCL)is a promising material with good biocompatibility,but its poor degradation rate,mechanical strength,and osteogenic properties limit its *** this study,we developed an Mg-1Ca/polycaprolactone(Mg-1Ca/PCL)composite scaffolds to overcome these *** used a melt blending method to prepare Mg-1Ca/PCL composites with Mg-1Ca alloy powder mass ratios of 5,10,and 20 wt%.Porous scaffolds with controlled macro-and microstructure were printed using the fused deposition modeling *** explored the mechanical strength,biocompatibility,osteogenesis performance,and molecular mechanism of the Mg-1Ca/PCL *** 5 and 10 wt%Mg-1Ca/PCL composites were found to have good ***,they promoted the mechanical strength,proliferation,adhesion,and osteogenic differentiation of human bone marrow stem cells(hBMSCs)of pure *** vitro degradation experiments revealed that the composite material stably released Mg_(2)+ions for a long period;it formed an apatite layer on the surface of the scaffold that facilitated cell adhesion and *** tomography and histological analysis showed that both 5 and 10 wt%Mg-1Ca/PCL composite scaffolds promoted bone regeneration bone *** results indicated that the Wnt/β-catenin pathway was involved in the osteogenic ***,Mg-1Ca/PCL composite scaffolds are expected to be a promising bone regeneration material for clinical *** of significance:Bone tissue engineering scaffolds have promising applications in the regeneration of critical-sized bone ***,there remain many limitations in the materials and manufacturing methods used to fabricate *** study shows that the developed Ma-1Ca/PCL composites provides scaffolds with suitable degradation rates and enhanced boneformation ***,the fused deposition modeling method allows precise control of the macroscopic morphology and microsc

关键词： 3D printing Bone tissue engineering Magnesium Osteogenic polycaprolactone Scaffold.

Injection molding of highly filled microcrystalline cellulose/polycaprolactone composites with the aid of reversible Diels-Alder reaction

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第3期170卷 246-254页

作者： Ze Pu Wang WenHong Ruan MinZhi Rong MingQiu Zhang Key Laboratory for Polymeric Composite and Functional Materials of MOE GD HPPC LabIGCMESchool of ChemistrySun Yat-Sen UniversityGuangzhou 510275China

To tackle the challenge of producing highly filled polymer composites using the traditional injection molding technique,which is characterized by the fairly high melt viscosity that makes mold filling difficult,the authors propose a solution based on dynamic covalent *** demonstrated by the proof-of-concept experiments,the 4-arm starshaped polycaprolactone(PCL)oligomers and microcrystalline cel-lulose(MCC)are crosslinked by the reversible Diels-Alder(DA)*** flowability of the compounds greatly decreases due to the dissociation of the intercomponent DA bonds at the retro-reaction tempera-ture,and the networked architecture is reconstructed during cooling as a result of the forward DA ***,the high-loading MCC fillers are well distributed in the matrix and covalently bonded to the nearby PCL,forming a striking contrast to the control in which linear PCL acts as the *** DA bonds crosslinked biodegradable PCL composites exhibit decent mechanical strength(20.7 MPa)even at the MCC fraction of 65 wt%,which is superior to those(5-12.2 MPa)of the highly filled PCL composites(with filler contents of 50-63.8 wt%)reported so *** proposed approach has sufficient expansibility for the fabrication of the highly filled polymer composites constructed by other types of matrix and fillers.

关键词： Polymer composites Microcrystalline cellulose polycaprolactone Injection molding Dynamic reversible chemistry

Dysprosium oxide,alumina,and graphene oxide reinforced polycaprolactone thin films:Thermal stability,morphology,and cell viability

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第7期42卷 1337-1343,I0005页

作者： Mohamed Tharwat Elabbasy Mohamed R.Atteya Mai A.Samak Mousa Abdelrahman Tahani AlMahmoud M.A.El-Morsy A.A.Menazea M.F.H.Abd El-Kader Department of Public Health College of Public Health and Health InformaticsUniversity of Ha'ilHa'il2440Saudi Arabia Food Control Department Faculty of Veterinary MedicineZagazig UniversityZagazig44519Egypt Department of Physical Therapy College of Applied Medical SciencesUniversity of Ha'ilHa'ilSaudi Arabia Department of Histology and Cell Biology Faculty of MedicineZagazig UniversityZagazig44519Egypt College of Nursing University of Ha'ilHa'ilSaudi Arabia College of Science and Humanities in Al-Kharj Physics DepartmentPlasma Technology and Material Science UnitPrince Sattam Bin Abdulaziz UniversityAl-kharj11942Saudi Arabia Physics Department Faculty of ScienceUniversity of DamiettaNew Damietta34517Egypt Spectroscopy Department Physics Research InstituteNational Research CentreDokki12622GizaEgypt Biophysics Department Faculty of ScienceCairo UniversityGizaEgypt

Developing a biomaterial for wound healing applications is still a ***,dysprosium oxide(Dy_(2)O_(3)),aluminum oxide(Al_(2)O_(3)),and graphene oxide(GO)were embedded in cast films based on polycaprolactone(PCL)to be examined for wound dressing *** techniques were used to characterize the fabricated films including X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),Raman,and scanning electron microscopy(SEM),besides their biological *** thermogravimetric analysis(TGA)exhibits high thermal stability as the scaffold weight decreases slightly to 98.6%after raising the temperature from room temperature to 280℃.The cell viability was investigated and it is shown that the viable cells grow up to approximately 93%at 75μg/***,the cell attachment shows excellent behavior as the cells attach on most of the surface of the modified PCL which shows high biocompatibility.

关键词： Wound healing polycaprolactone Dy_(2)O_(3) Al_(2)O_(3) Biocompatible Rare earths

polycaprolactone Grafting of Cellulose Nanocrystals in Ionic Liquid[BMIM]CI

在线全文

学校读者我要写书评

暂无评论

Wuhan University Journal of Natural Sciences 2014年第2期19卷 117-122页

作者： HUANG Qing HUANG Jin CHANG P R College of Chemical Engineering Wuhan University of Technology State Key Laboratory of Pulp and Paper Engineering South China University of Technology BioProducts and Bioprocesses National Science Program Agriculture and Agri-Food Canada

A polycaprolactone-graffed cellulose nanocrystal （PCL-g-CN） was prepared in ionic liquid and characterized by Fourier transform infrared spectrum （FT-IR）, X-ray diffraction （XRD）, and transmission electron microscopy （TEM）. A peak assigned to the carbonyl group appears at 1 730 cm-1 in the FT-IR of PCL-g-CN, which confirms that the grafting reaction is suc- cessfully completed. The morphologies of PCL-g-CNs still main- tain rod-like structure according to the TEM images. XRD results show that the crystal type of the PCL-g-CNs changed from cellu- lose I to cellulose II. The reasons for crystal transition of CNs turn out to be combined effects of anion and cation in ionic liquid with CNs.

关键词： ionic liquid cellulose nanocrystals polycaprolactone crystal transformation