检索结果-南通市图书馆

High Seebeck Coefficient Thermally Chargeable Supercapacitor with Synergistic Effect of Multichannel Ionogel Electrolyte and Ti3C2Tx MXene-Based Composite Electrode

引用

ENERGY & ENVIRONMENTAL MATERIALS 2024年第6期7卷 367-377页

作者： Chen, Zhongming Du, Zhijian Li, La Jiang, Kai Chen, Di Shen, Guozhen Univ Sci & Technol beijing Sch Math & Phys Beijing 100083 Peoples R China beijing Inst Technol Sch Integrated Circuits & Elect Beijing 100081 Peoples R China Chinese PLA Chinese PLA Gen Hosp Inst Hepatobiliary Surg Chinese PLA Fac Hepatopancreato Biliary Surg Beijing 100853 Peoples R China Chinese PLA Key Lab Digital Hepetobiliary Surg Beijing 100853 Peoples R China

Thermally chargeable supercapacitors can collect low-grade heat generated by the human body and convert it into electricity as a power supply unit for wearable electronics. However, the low Seebeck coefficient and heat-to-electricity conversion efficiency hinder further application. In this paper, we designed a high-performance thermally chargeable supercapacitor device composed of ZnMn2O4@Ti3C2Tx MXene composites (ZMO@Ti3C2Tx MXene) electrode and UIO-66 metal-organic framework doped multichannel polyvinylidene fluoridehexafluoro-propylene ionogel electrolyte, which realized the thermoelectric conversion and electrical energy storage at the same time. This thermally chargeable supercapacitor device exhibited a high Seebeck coefficient of 55.4 mV K-1, thermal voltage of 243 mV, and outstanding heat-to-electricity conversion efficiency of up to 6.48% at the temperature difference of 4.4 K. In addition, this device showed excellent charge-discharge cycling stability at high-temperature differences (3 K) and low-temperature differences (1 K), respectively. Connecting two thermally chargeable supercapacitor units in series, the generated output voltage of 500 mV further confirmed the stability of devices. When a single device was worn on the arm, a thermal voltage of 208.3 mV was obtained indicating the possibility of application in wearable electronics.

关键词： ionogel electrode Soret effect thermally chargeable supercapacitor Ti3C2Tx MXene UIO-66 MOF GELS

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Copper(I) Cluster of Aggregation-Induced Emission and X-Ray Scintillator Characteristic

引用

CHEMICAL RESEARCH IN CHINESE UNIVERSITIES 2024年第5期40卷 887-893页

作者： Xiong, Jiayu Wu, Minjian Yao, Liao-Yuan beijing Inst Technol Sch Chem & Chem Engn Beijing Key Lab Photoelect Electrophoton Convers M MOE Key Lab Cluster Sci Beijing Peoples R China beijing Inst Technol Tangshan Res Inst Tangshan 063000 Peoples R China

Due to their precise atomic structures, photoluminescent copper nanoclusters (Cu NCs) have promising applications in basic research and technical applications, such as bioimaging, cell labeling, phototherapy, and photoactivation catalysis. In this work, we report a simple strategy for synthesizing novel CuNCs co-protected by alkynyl and phosphine ligands with the molecular formula [Cu7(PPh3)10(PE)3(CH3O)] (Cu4@Cu3). Single-crystal X-ray crystallography reveals that the NC core exhibits an open square structure and an overall pyramid shape. Two Cu4@Cu3 units are connected through weak interactions to form dimers in crystals, creating a molecular cage that looks like two tightly closed bowls. Cu4@Cu3 exhibits dual emission in the visible region. It is also an aggregation-induced emission (AIE)-active luminescent substance, which exhibits strong emission in the visible light region when aggregated. Besides, it has the properties of radioluminescent (RL) and could be a potential scintillator material. This study not only enriches the types of atomically accurate AIE clusters, but also holds significant importance for the development of a new generation of high-performance and environmentally friendly X-ray scintillators.

关键词： Copper nanocluster Aggregation-induced emission X-Ray scintillator AIE

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Multi-UAVs Collaborative Path Planning in the Cramped Environment

引用

IEEE/CAA Journal of Automatica Sinica 2024年第2期11卷 529-538页

作者： Siyuan Feng Linzhi Zeng Jining Liu Yi Yang Wenjie Song School of Automation Beijing Institute of TechnologyNanjing 210039China Nanjing Research Institute of Electronics technology Nanjing 210039China Yichang Testing Technique Research Institute Yichang 443003China IEEE

Due to its flexibility and complementarity, the multiUAVs system is well adapted to complex and cramped workspaces, with great application potential in the search and rescue(SAR) and indoor goods delivery fields. However, safe and effective path planning of multiple unmanned aerial vehicles(UAVs)in the cramped environment is always challenging: conflicts with each other are frequent because of high-density flight paths, collision probability increases because of space constraints, and the search space increases significantly, including time scale, 3D scale and model scale. Thus, this paper proposes a hierarchical collaborative planning framework with a conflict avoidance module at the high level and a path generation module at the low level. The enhanced conflict-base search(ECBS) in our framework is improved to handle the conflicts in the global path planning and avoid the occurrence of local deadlock. And both the collision and kinematic models of UAVs are considered to improve path smoothness and flight safety. Moreover, we specifically designed and published the cramped environment test set containing various unique obstacles to evaluating our framework performance thoroughly. Experiments are carried out relying on Rviz, with multiple flight missions: random, opposite, and staggered, which showed that the proposed method can generate smooth cooperative paths without conflict for at least 60 UAVs in a few *** benchmark and source code are released in https://***/inin-xingtian/multi-UAVs-path-planner.

关键词： Collision avoidance conflict resolution multi-unmanned aerial vehicles(UAVs)system path planning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Pressure transient characteristics of non-uniform conductivity fractured wells in viscoelasticity polymer flooding based on oil-water two-phase flow

引用

Petroleum science 2024年第1期21卷 343-351页

作者： Yang Wang Jia Zhang Shi-Long Yang Ze-Xuan Xu Shi-Qing Cheng National Key Laboratory of Petroleum Resources and Engineering China University of Petroleum(Beijing)Beijing102249China

Polymer flooding in fractured wells has been extensively applied in oilfields to enhance oil *** contrast to water,polymer solution exhibits non-Newtonian and nonlinear behavior such as effects of shear thinning and shear thickening,polymer convection,diffusion,adsorption retention,inaccessible pore volume and reduced effective ***,the flux density and fracture conductivity along the hydraulic fracture are generally non-uniform due to the effects of pressure distribution,formation damage,and proppant *** this paper,we present an oil-water two-phase flow model that captures these complex non-Newtonian and nonlinear behavior,and non-uniform fracture characteristics in fractured polymer *** hydraulic fracture is firstly divided into two parts:high-conductivity fracture near the wellbore and low-conductivity fracture in the far-wellbore section.A hybrid grid system,including perpendicular bisection(PEBI)and Cartesian grid,is applied to discrete the partial differential flow equations,and the local grid refinement method is applied in the near-wellbore region to accurately calculate the pressure distribution and shear rate of polymer *** combination of polymer behavior characterizations and numerical flow simulations are applied,resulting in the calculation for the distribution of water saturation,polymer concentration and reservoir *** with the polymer flooding well with uniform fracture conductivity,this non-uniform fracture conductivity model exhibits the larger pressure difference,and the shorter bilinear flow period due to the decrease of fracture flow ability in the far-wellbore *** field case of the fall-off test demonstrates that the proposed method characterizes fracture characteristics more accurately,and yields fracture half-lengths that better match engineering reality,enabling a quantitative segmented characterization of the near-wellbore section with high fracture conductivity and th

关键词： Polymer flooding Non-Newtonian fluid Non-uniform fracture conductivity Two-phase flow Pressure transient analysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

In vitro performance of a biodegradable zinc alloy adjustable-loop cortical suspension fixation for anterior cruciate ligament reconstruction

引用

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 887-898页

作者： Ting Wang Zhangzhi Shi Hongyong Zhong Xiangmin Li Jinling Sun Wei Yin Xiaojing Ji Qiang Wang Anqi Zhao Luning Wang School of Materials science and Engineering University of Science and Technology BeijingBeijing 100083China

Anterior cruciate ligament(ACL)injuries of the knee are one of the most common and serious athletic *** widely used cortical suspension fixation buttons for ligament reconstruction are permanent implants,particularly those made from conventional steel or titanium *** this study,a biodegradable Zn-0.45Mn-0.2Mg(ZMM42)alloy with the yield strength of 300.4 MPa and tensile strength of 329.8 MPa was prepared through hot *** use of zinc alloys in the preparation of cortical suspension fixation buttons was proposed for the first *** 35 d of immersion in simulated body fluids,the ZMM42 alloy fixation buttons were degraded at a rate of 44μm/a,and the fixation strength was retained(379.55 N)in the traction ***,the ZMM42 alloy fixation buttons exhibited an increase in MC3T3-E1 cell viability and high antibacterial activity against Escherichia coli and Staphylococcus *** results reveal the potential of biodegradable zinc alloys for use as ligament reconstruction materials and for developing diverse zinc alloy cortical suspension fixation devices.

关键词： anterior cruciate ligament reconstruction zinc alloy fixation buttons mechanical property corrosion behavior biocompatibility

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Understanding the initial use stage of cement mortar lining in drinking water distribution systems:Silicon and aluminum as stability indicators

引用

Journal of Environmental sciences 2024年第1期135卷 495-505页

作者： Qiaozhi Liu Yuan Zhuang Guiwei Li Yao Zhang Marc A.Edwards Baoyou Shi Key Laboratory of Drinking Water science and technology Research Center for Eco-Environmental SciencesChinese Academy of SciencesBeijing 100085China University of Chinese Academy of sciences Beijing 100049China Civil and Environmental Engineering Virginia TechBlacksburgVA 24061USA

The cement mortar lining(CML)of commonly used ductile iron pipes can severely deteriorate the drinking water quality at the initial stage of use,but the behavioral characteristics of different elements release from the CML in this stage is still *** this study,dynamic immersion experiments with new cement mortar lined ductile iron pipe reactors were conducted under different feed water hardness and alkalinity *** results showed that the release of alkaline substances from the CML at the initial stage of use could strongly influence the pH of water,which consequently greatly impacted the release/precipitation behaviors of calcium,aluminum and *** pH and aluminum concentration of the effluent water could reach 11.5 and 700μg/L within 24 hr of hydraulic retention time,respectively,under conditions of relatively lower hardness and *** to the pH elevation,calcium carbonate precipitation could occur even at much lower feed water *** the aluminum and silicon could keep release from the CML in soluble form at different hardness and alkalinity levels,and their release rate depended on the amount of calcium carbonate ***,aluminum and silicon were more suitable as indicators of the corrosion intensity at the initial stage of CML use rather than the traditional calcium carbonate precipitation *** feed water hardness and alkalinity levels for mitigating the initial intense corrosion of CML were proposed:hardness>40 mg/L(CaCO_(3)),alkalinity>100 mg/L(CaCO_(3)).

关键词： Cement mortar lining Hardness Alkalinity Elemental release Drinking water supply

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Surficial modification enabling planar Al growth toward dendrite-free metal anodes for rechargeable aluminum batteries

引用

science china Chemistry 2024年第4期67卷 1341-1351页

作者： Wenhao Liu Yu Li Bo Long Haoyi Yang Lumin Zheng Ying Bai Feng Wu Chuan Wu School of Materials science and Engineering Beijing Institute of TechnologyBeijing 100081China Yangtze Delta Region Academy of beijing Institute of technology Jiaxing 314019China

Al metal possesses ultrahigh theoretical volumetric capacity of 8,040 m Ah cm^(-3),and gravimetric capacity of 2,980 m Ah g^(-1),and thus is highly attractive for electrochemical energy ***,it suffers from several issues,such as the dendrite formation,during Al stripping-deposition cycling,which has been verified to account for the short circuit and limited cyclic ***,we use a facile and applicable method to in-situ reconstruct the Al anode surface with F-Al-O chemical bonds,which could preferentially induce the planar growth of Al along the interface plane,thus leading to the dendrite-free morphology evolution during the *** from F-Al-O chemical bonds on the surface of Al anodes,long lifespan of symmetric cells can be realized even under 1 m A cm^(-2)and 1 m Ah cm^(-2).Coupling the F-Al anode with graphite-based cathodes,high-voltage dual-ion Al metal batteries can be achieved with long-term cycle stability up to 1,200 cycles(at 0.5 m A cm^(-2)),surpassing the counterparts using pristine Al metal ***,the effectiveness of this surficial modification strategy is also elucidated with the aid of theoretical *** work provides novel insights on low-cost and facile strategies against the Al dendrite growth in aluminum batteries.

关键词： rechargeable aluminum batteries Al metal anode Al dendrite dual-ion batteries surficial modification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Coercivity mechanism of high-performance anisotropic heterostructure SmCo5 magnets

引用

Journal of Rare Earths 2024年第10期42卷 1882-1888页

作者： Yuan Teng Yuqing Li Weiqiang Liu Xiaochang Xu Zhanjia Wang Jianjun Yang Dongtao Zhang Hongguo Zhang Qingmei Lu Qiong Wu Weixing Xia Ming Yue Faculty of Materials and Manufacturing Key Laboratory of Advanced Functional MaterialsMinistry of Education of ChinaBeijing University of Technology School of Mechanical and Electrical Engineering Henan Institute of Science and Technology School of Mechanical Engineering Anyang Institute of Technology Key Laboratory of Magnetic Materials and Devices Ningbo Institute of Material Technology and EngineeringChinese Academy of Sciences

Due to its large magnetocrystalline anisotropy field and high Curie temperature,SmCo-based magnets are irreplaceable in high-temperature applications,The hot-deformed SmCo-based magnets are especially attractive for their excellent corrosion resistance,making them more suitable for harsh ***,it is still challenging for hot-deformed SmCo-based magnets to obtain high magnetization and high coercivity ***,it is necessary to analyze the relationship between its microstructure and magnetic properties and explore its magnetic hardening mechanism to guide the further improvement of magnetic *** this paper,the anisotropic heterostructure SmCo5magnet was prepared by combining large height-reduction and introducing a nano-grained Smrich *** c-axis texture,（BH）m of 16.1 MGOe,and Hciof 9.6 kOe were obtained via the heterostructure with SmCo5micron-grain and Sm-rich nano-scale *** magnetic domain observation and technical magnetization analysis demonstrate that the coe rcivity mechanism is dominated by *** results also show that the smooth and Sm-rich precipitated grain boundary provides weak pinning *** provides a reference for the development of high-pe rformance nanocrystalline SmCo5magnets.

关键词： Coercivity mechanism Heterostructure Hot-deformed SmCo magnet Permanent magnet Rare earths

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Co-enhancement of thermal conduction and radiation through morphologies controlling of graphene functional layer for chip thermal management

引用

Nano Research 2024年第10期17卷 8885-8892页

作者： Shuting Cheng Kun Wang Shichen Xu Yi Cheng Ruojuan Liu Kewen Huang Hao Yuan Wenjuan Li Yuyao Yang Fushun Liang Fan Yang Kangyi Zheng Zhiwei Liang Ce Tu Mengxiong Liu Xiaomin Yang Jingnan Wang Xuzhao Gai Yuejie Zhao Xiaobai Wang Yue Qi Zhongfan Liu State Key Laboratory of Heavy Oil Processing College of ScienceChina University of PetroleumBeijing 102249China Centre for Nanochemistry Beijing Science and Engineering Centre for NanocarbonsBeijing National Laboratory for Molecular SciencesCollege of Chemistry and Molecular EngineeringPeking UniversityBeijing 100871China beijing Graphene Institute(BGI) Beijing 100095China College of Energy Soochow Institute for Energy and Materials Innovations(SIEMIS)Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy TechnologiesSoochow UniversitySuzhou 215006China Department of Chemistry College of Chemistry and Materials EngineeringBeijing Technology and Business UniversityBeijing 100048China

With the continuous advancements in electronics towards downsizing and integration,efficient thermal dissipation from chips has emerged as a critical factor affecting their lifespan and operational *** fan-less chip cooling system has two critical interfaces for thermal transport,which are the contact interface between the base and the chip dominated by thermal conduction,and the surface of the fins dominated by thermal *** different thermal transfer modes of these two critical interfaces pose different requirements for thermal management *** the study,a novel approach was proposed by developing graphene thermal transport functional material whose morphology could be intentionally designed via reformed plasmaenhanced chemical vapor deposition(PECVD)methods to meet the diverse requirements of heat transfer ***,graphene with multilevel branching structure of vertical graphene(BVG)was fabricated through the hydrogenassisted PECVD(H_(2)-PECVD)strategy,which contributed a high emissivity of~*** was deposited on the fins’surface and functioned as the radiation enhanced layer to facilitate the rapid radiation of heat from the heat sinks into the surrounding ***,the well-oriented vertical graphene(OVG)was successfully prepared through the vertical electric field-assisted PECVD process(EF-PECVD),which showed a high directional thermal conductivity of~53.5 W·m^(-1)·K^(-1).OVG was deposited on the contact interface and functioned as the thermal conduction enhanced layer,allowing for the quick transmission of heat from the chip to the heat *** this design concept,the two critical interfaces in the chip cooling system can be jointly enhanced,resulting in a remarkable cooling efficiency enhancement of~30.7%,demonstrating that this novel material possessed enormous potential for enhancing the performance of cooling ***,this research not only provided new design concepts for the cooling system

关键词： chip thermal management thermal conduction thermal radiation graphene morphology control

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Electronic structure engineering of single atomic sites by plasmoninduced hot electrons for highly efficient and selective photocatalysis

引用

Nano Research 2024年第8期17卷 6960-6967页

作者： Xiaoya Huang Xinyuan Li Akang Chen Hongfei Gu Shouyuan Li Tailei Hou Shuwen Zhu Shuang Yu Yin Song Jiatao Zhang beijing Key Laboratory of Construction Tailorable Advanced Functional Materials and Green Applications MIIT Key Laboratory of Medical Molecule Science and Pharmaceutical EngineeringMOE Key Laboratory of Cluster ScienceSchool of Chemistry and Chemical EngineeringSchool of Materials Science and EngineeringBeijing Institute of TechnologyBeijing 100081China MIIT Key Laboratory of Complex-field Intelligent Exploration School of Optics and PhotonicsBeijing Institute of TechnologyBeijing 100081China

Single atom(SA)catalysts have achieved great success on highly selective heterogeneous catalysis due to their abundant and homogeneous active *** electronic structures of these active sites,restrained by their localized coordination environments,significantly determine their catalytic performances,which are difficult to ***,we investigated the effect of localized surface plasmon resonance(LSPR)on engineering the electronic structures of single atomic ***,core–shell structures consisted of Au core and transition metal SAs loaded N-doped carbon(CN)shell were constructed,namely Au@M-SA/CN(M=Ni,Fe,and Co).It was demonstrated that plasmon-induced hot electrons originated from Au were directionally injected to the M-SAs under visible light irradiation,which significantly changed their electronic structures and meanwhile facilitated improved overall charge separation *** as-prepared Au@Ni-SA/CN exhibited highly efficient and selective photocatalytic CO_(2) reduction to CO performance,which is 20.8,17.5,and 6.9 times those of Au nanoparticles,Au@CN,and Ni-SA/CN,*** spectroscopy analysis and theoretical calculations confirmed that the plasmon enhanced Ni-SA/CN sites featured increased charge density for efficient intermediate activation,contributing to the superb photocatalytic *** work provides a new insight on plasmon and atomic site engineering for efficient and selective catalysis.

关键词： single atom catalysts plasmon enhancement coupling effect photocatalysis CO_(2) reduction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：