检索结果-南通市图书馆

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 283-292页

作者： yong-Chao Gai Rui Zhang Chuan-yong Cui Zi-jian Zhou Yi Tan Yi-Zhou Zhou Xiao-Feng Sun Key Laboratory of Materials Modification by Laser Ionand Electron Beams(Ministry of Education)School of Materials Science and EngineeringDalian University of TechnologyDalian116024China Shi-Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang110016China

The hot compression behavior and tensile strength after compression of a new Ni-Co-based superalloy produced using electron beam smelting layered(EBSL)solidification technology were *** compression tests were performed at temperatures of 1120℃and 1150℃,with strain rates of 1 s^(-1) and 0.01 s^(-1),reaching a true strain of *** strength was evaluated at room *** results revealed that this EBSL technology accelerates dynamic recrystallization(DRX),without compromising the strength of alloy.A significant correlation between the volume fraction of DRX and the strain rate was observed,with higher fractions at lower strain rates,leading to higher tensile ***,at the same strain rate,the specimens compressed at 1120℃exhibited higher tensile strength due to undissolvedγ′*** solution and aging heat treatment,the alloy maintained high tensile *** results suggested that the EBSL Ni-Co-based superalloy offers excellent prospects for practical applications.

关键词： Ni-Co-based superalloy Hot deformation Electron beam smelting Tensile strength

Oxidation behavior of low-grade vanadiferous titanomagnetite concentrate with high titanium

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第2期31卷 329-341页

作者： Jin-sheng Liu Zhen-xing Xing Gong-jin Cheng Xue-yong ding Xiang-xin Xue School of Metallurgy Northeastern UniversityShenyang110819LiaoningChina Liaoning Key Laboratory of Recycling Science for Metallurgical Resources Shenyang110819LiaoningChina Innovation Research Institute of Vanadium and Titanium Resource Industry Technology Northeastern UniversityShenyang110819LiaoningChina

In order to clarify the oxidation mechanisms and make better use of the low-grade vanadiferous titanomagnetite concentrate with high titanium(LVTC),the oxidation behavior of LVTC was *** results showed that oxidation degree was achieved within 90 min when temperature was not lower than 700°C,and the main phases of the oxidized LVTC consisted of Fe9TiO15,Fe2O3,CaSiTiO5 and a small amount of *** temperature is favorable to the formation of *** surface of LVTC gradually becomes rough,with fine particles of needle-like and granular shape appearing on the surface,which finally turn from laminar to creamy,spread out,and are interspersed with many tiny *** phase oxidation paths in LVTC were as follows:(1)Fe2.75Ti0.25O4→Fe9TiO15+Fe2O3;(2)Fe2.75Ti0.25O4→Fe2O3+FeTiO3→Fe2TiO5;(3)FeTiO3→Fe2O3+Fe2Ti3O9→*** is predominantly mesoporous whether oxidized or not,with the pores mainly distributed in the range of 2–40 nm,and the specific surface area of LVTC decreases significantly with increasing temperature.

关键词： Low-grade vanadiferous titanomagnetite concentrate Oxidation degree Phase transformation Micromorphology Oxidation path Pore structure

Remote sensing of air pollution incorporating integrated-path differential-absorption and coherent-Doppler lidar

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 594-601页

作者： Ze-hou Yang yong Chen Chun-li Chen yong-ke Zhang Ji-hui Dong Tao Peng Xiao-feng Li ding-fu Zhou School of Physics Beijing Institute of TechnologyBeijing 100081China Southwest Institute of Technical Physics Chengdu 610041SichuanChina School of Optics and Photonics Beijing Institute of TechnologyBeijing 100081China

An innovative complex lidar system deployed on an airborne rotorcraft platform for remote sensing of atmospheric pollution is proposed and *** system incorporates integrated-path differential absorption lidar(DIAL) and coherent-doppler lidar(CDL) techniques using a dual tunable TEA CO_(2)laser in the 9—11 μm band and a 1.55 μm fiber *** combining the principles of differential absorption detection and pulsed coherent detection,the system enables agile and remote sensing of atmospheric *** static tests validate the system’s real-time detection capabilities,including the measurement of concentration-path-length product(CL),front distance,and path wind speed of air pollution plumes over long distances exceeding 4 *** experiments is conducted with the *** of the pollutant concentration and the wind field is carried out in an approximately 1 km slant range over scanning angle ranges from 45°to 65°,with a radial resolution of 30 m and10 *** test results demonstrate the system’s ability to spatially map atmospheric pollution plumes and predict their motion and dispersion patterns,thereby ensuring the protection of public safety.

关键词： Differential absorption LIDAR Coherent Doppler lidar Remoting sensing Atmospheric pollution

Effect of antioxidants on the efficiency of jet milling and the powder characteristics of Sm2Co17 permanent magnets

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第9期33卷 615-620页

作者： Da-Shuai Xu Lei Liu jian-Hui Yuan Bo Zhou Chuang-Hui Dong Feng-Qing Wang yong ding Ying-Li Sun A-Ru Yan School of Materials Science and Engineering Shanghai University of Engineering ScienceShanghai 201620China CISRI&NIMTE Joint Innovation Center for Rare Earth Permanent Magnets CAS Key Laboratory of Magnetic Materials and DevicesZhejiang Province Key Laboratory of Magnetic Materials and Application TechnologyNingbo Institute of Materials Technology and EngineeringChinese Academy of SciencesNingbo 315201China University of Chinese Academy of Sciences Beijing 100049China

This study investigated the effect of antioxidants on the grinding efficiency,magnetic powder characteristics,microstructure,and magnetic properties of 2:17 type SmCo permanent magnet *** results show that adding antioxidants helps improve the dispersion among magnetic powders,leading to a 33.3%decrease in jet milling time and a 15.8%increase in magnet powder production ***,adding antioxidants enhances the oxidation resistance of the magnetic *** being stored in a constant temperature air environment at 25C for 48 h,the O content in the powder decreased by 33%compared to samples without *** in the magnet body,the O content decreased from 0.21 wt.%to 0.14 wt.%,which helps increase the effective Sm content and domain wall pinning uniformity in the *** magnetic properties were obtained in the magnet with added antioxidants:B_(r)=11.6 kGs,SF=79.6%,H_(cj)=16.8 kOe,and(BH)_(max)=32.5 MGOe.

关键词： antioxidant SmCo permanent magnet oxidation resistance grinding efficiency

Quantitative characterizations of anisotropic dynamic properties in organic-rich shale with different kerogen content

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 855-865页

作者： jian-yong Xie Yan-Ping Fang Xing-Hua Wu jian'er Zhao Jun-Cheng Dai Jun-Xing Cao Ji-Xin Deng State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Chengdu University of TechnologyChengdu610059SichuanChina Key Lab of Earth Exploration&Information Techniques of Ministry of Education Geophysical InstituteChengdu University of TechnologyChengdu610059SichuanChina PetroChina Southwest Oil&Gasfield Company Chengdu610017SichuanChina

Understanding the quantitative responses of anisotropic dynamic properties in organic-rich shale with different kerogen content(KC)is of great significance in hydrocarbon exploration and *** controlled experiments with a single variable is challenging for natural shales due to their high variations in components,diagenesis conditions,or pore *** employed the hot-pressing technique to construct 11 well-controlled artificial shale with varying *** artificial shale samples were successive machined into prismatic shape for ultrasonic measurements along different *** revealed bedding perpendicular P-wave velocities are more sensitive to the increasing KC than bedding paralleling velocities due to the preferential alignments of *** elastic stiffnesses except C_(13)are generally decreasing with the increasing KC,the variation of C_(1) and C_(33)on kerogen content are more sensitive than those of C_(44)and C_(66).Apparent dynamic mechanical parameters(v and E)were found to have linear correlation with the true ones from complete anisotropic equations independent of KC,which hold value towards the interpretation of well logs consistently across formations,Anisotropic mechanical parameters(ΔE and brittlenessΔB)tend to decrease with the reducing KC,withΔB showing great sensitivity to KC *** the range of low KC(10%)shale,compilation of data from natural organic rich-shales globally verified the similar systematic relationships that can be empirically used to predict the fraction of KC in shales.

关键词： Elastic properties Organic shale Anisotropy Kerogen content Physical modeling

Nano-alumina@cellulose-coated separators with the reinforcedconcrete-like structure for high-safety lithium-ion batteries

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第4期68卷 83-93页

作者： Zhihao Yang Li Chen jian Xue Miaomiao Su Fangdan Zhang Liangxin ding Suqing Wang Haihui Wang Guangdong Provincial Key Lab of Green Chemical Product Technology School of Chemistry and Chemical EngineeringSouth China University of TechnologyGuangzhou 510640China Beijing Key Laboratory of Membrane Materials and Engineering Department of Chemical EngineeringTsinghua UniversityBeijing 100084China

Separators play a critical role in the safety and performance of lithium-ion ***,commercial polyolefin separators are limited by their poor affinity with electrolytes and low melting *** this work,we constructed a reinforced-concrete-like structure by homogeneously dispersing nano-Al_(2)O_(3) and cellulose on the separators to improve their stability and *** this reinforcedconcrete-like structure,the cellulose is a reinforcing mesh,and the nano-Al_(2)O_(3) acts as concrete to support the *** constructing the reinforced-concrete-like structure,the separators exhibit good stability even at 200℃(thermal shrinkage of 0.3%),enhanced tensile strain(tensile stress of 133.4 MPa and tensile strains of 62%),and better electrolyte wettability(a contact angle of 6.5°).Combining these advantages,the cells with nano-Al_(2)O_(3)@cellulose-coated separators exhibit stable cycling performance and good rate ***,the construction of the reinforced-concretelike structure is a promising technology to promote the application of lithium-ion batteries in extreme environments.

关键词： Alumina Nanomaterials Lithium-ion batteries Membranes Cellulose Reinforced-concrete-like structure

Research on the mechanism of the two-dimensional ultrasonic surface burnishing process to enhance the wear resistance for aluminum alloy

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第3期12卷 490-509页

作者： Zhen-Yu ZHOU Qiu-Yang ZHENG Yu LI Cong ding Guang-jian PENG Zhong-Yu PIAO College of Mechanical Engineering Zhejiang University of TechnologyHangzhou 310023China Key Laboratory of Special Purpose Equipment and Advanced Processing Technology Ministry of Education and Zhejiang ProvinceZhejiang University of TechnologyHangzhou 310014China

The gradient nanostructure is machined on the aluminum(Al)alloy by the two-dimensional ultrasonic surface burnishing process(2D-USBP).The mechanism of why the gradient nanostructure enhances wear resistance is *** mechanical properties and microstructure characterization for the gradient nanostructure are performed by operating a nanoindenter,transmission electron microscopy(TEM),and electron backscattered diffraction(EBSD).Dry wear tests are performed on the samples before and after machining to evaluate the wear resistance and *** effect of the gradient nanostructure on the wear resistance is explored by developing the crystal plasticity(CP)finite element and molecular dynamics(MD)*** characterization results show that the 2D-USBP sample prepared a gradient structure of~600μm thick on the aluminum surface,increasing the surface hardness from 1.13 to 1.71 GPa and reducing the elastic modulus from 78.84 to 70.14 *** optimization of the surface microstructure and the increase of the mechanical properties effectively enhance the wear resistance of the sample,with 41.20%,39.07%,and 54.58% of the wear scar areas for the 2D-USBP treated samples to the original samples under 5,10,and 15 N loads,*** gradient nanostructure hinders the slip of dislocations inside the sample during the wear process and reduces the size and scope of plastic deformation;meanwhile,the resistance to deformation,adhesion,and crack initiation and propagation of the sample surface is improved,resulting in enhanced wear resistance.

关键词： structural superlubricity lattice registry elastic deformation strained solitons crystal plasticity molecular dynamics simulations

Effect of cooling method on TiN precipitation behavior of high-titanium high-strength steel during solidification

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1692-1703页

作者： Xue-jian Zhang Guang-wei Yang yong Wan yong-hong Wen Chuan-sheng Tang Ming-qi Liu Li-jie Tian Key Laboratory of Metallurgical Emission Reduction and Resources Recycling Anhui University of TechnologyMa'anshan 243002AnhuiChina School of Metallurgical Engineering Anhui University of TechnologyMa'anshan 243002AnhuiChina Baosteel Central Research Institute Baoshan Iron and Steel Co.Ltd.Shanghai 201999China

Metallographic microscopy,scanning electron microscopy and TiN growth thermodynamic and kinetic equations were used to investigate the morphology,quantity,and size of TiN in the center of high-titanium high-strength steels under different solidification cooling *** results showed that TiN in the center of the experimental steels mainly existed in three forms:single,composite(Al2O3-TiN),and multi-particle *** began precipitating at around 1497℃(solidification fraction of 0.74).From the end of melting to solidification for 180 s,the cooling rates in the center of the experimental steels for furnace cooling,air cooling,refractory mold cooling,and cast iron mold cooling tended to stabilize at 0.17,0.93,1.65,and 2.15℃/s,*** size of TiN in the center of the experimental steel cooled using furnace cooling was mainly concentrated in the 5-15 pm *** contrast,the size of TiN in the center of the experimental steels cooled using air cooling,refractory mold cooling,and cast iron mold cooling were mainly concentrated in the 1-5 pm *** addition,their density of TiN in the center of the experimental steels is signif-icantly higher than that of the furnace-cooled experimental *** and kinetic precipitation models of TiN established predicted the growth size of TiN in a high-titanium high-strength steel when the solidification cooling rates are not below 0.93℃/s.

关键词： High-titanium steel Cooling method TiN Thermodynamics Kinetics

Hydrocarbon gas huff-n-puff optimization of multiple horizontal wells with complex fracture networks in the M unconventional reservoir

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 1018-1031页

作者： Hao-Chuan Zhang yong Tang You-Wei He yong Qin jian-Hong Luo Yu Sun Ning Wang De-Qiang Wang State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500SichuanChina CNPC Research Institute of Petroleum Exploration&Development Beijing100083China Southwest Oil&Gas Field Company PetroChinaChengdu610051SichuanChina State Key Laboratory of Offshore Oil Exploitation CNOOC Research Institute Co.LtdBeijing100027China

The oil production of the multi-fractured horizontal wells(MFHWs) declines quickly in unconventional oil reservoirs due to the fast depletion of natural energy. Gas injection has been acknowledged as an effective method to improve oil recovery factor from unconventional oil reservoirs. Hydrocarbon gas huff-n-puff becomes preferable when the CO_(2) source is limited. However, the impact of complex fracture networks and well interference on the EOR performance of multiple MFHWs is still unclear. The optimal gas huff-n-puff parameters are significant for enhancing oil recovery. This work aims to optimize the hydrocarbon gas injection and production parameters for multiple MFHWs with complex fracture networks in unconventional oil reservoirs. Firstly, the numerical model based on unstructured grids is developed to characterize the complex fracture networks and capture the dynamic fracture ***, the PVT phase behavior simulation was carried out to provide the fluid model for numerical simulation. Thirdly, the optimal parameters for hydrocarbon gas huff-n-puff were obtained. Finally, the dominant factors of hydrocarbon gas huff-n-puff under complex fracture networks are obtained by fuzzy mathematical method. Results reveal that the current pressure of hydrocarbon gas injection can achieve miscible displacement. The optimal injection and production parameters are obtained by single-factor analysis to analyze the effect of individual parameter. Gas injection time is the dominant factor of hydrocarbon gas huff-n-puff in unconventional oil reservoirs with complex fracture networks. This work can offer engineers guidance for hydrocarbon gas huff-n-puff of multiple MFHWs considering the complex fracture networks.

关键词： Unconventional oil reservoir Complex fracture network Hydrocarbon gas huff-n-puff Parameter optimization Numerical simulation

Industrial Carbon Emission Distribution and Regional Joint Emission Reduction:A Case Study of Cities in the Pearl River Basin,China

在线全文

学校读者我要写书评

暂无评论

Chinese Geographical Science 2024年第2期34卷 210-229页

作者： jianG Hongtao YIN jian ZHANG Bin WEI Danqi LUO Xinyuan ding Yi XIA Ruici Center for Western China Modernization Guizhou University of Finance and EconomicsGuiyang 550025China College of Big Data Application and Economic Guizhou University of Finance and EconomicsGuiyang 550025China Key Laboratory of Green Fintech Guizhou University of Finance and EconomicsGuiyang 550025China

China’s low-carbon development path will make significant contributions to achieving global sustainable development *** to the diverse natural and economic conditions across different regions in China,there exists an imbalance in the distribution of car-bon ***,regional cooperation serves as an effective means to attain low-carbon *** study examined the pattern of carbon emissions and proposed a potential joint emission reduction strategy by utilizing the industrial carbon emission intens-ity(ICEI)as a crucial *** utilized social network analysis and Local Indicators of Spatial Association(LISA)space-time trans-ition matrix to investigate the spatiotemporal connections and discrepancies of ICEI in the cities of the Pearl River Basin(PRB),China from 2010 to *** primary drivers of the ICEI were determined through geographical detectors and multi-scale geographically weighted *** results were as follows:1)the overall ICEI in the Pearl River Basin is showing a downward trend,and there is a significant spatial imbalance.2)There are numerous network connections between cities regarding the ICEI,but the network structure is relatively fragile and unstable.3)Economically developed cities such as Guangzhou,Foshan,and Dongguan are in the center of the network while playing an intermediary role.4)Energy consumption,industrialization,per capita GDP,urbanization,science and techno-logy,and productivity are found to be the most influential variables in the spatial differentiation of ICEI,and their combination in-creased the explanatory power of the geographic variation of ***,through the analysis of differences and connections in urban carbon emissions under different economic levels and ICEI,the study suggests joint carbon reduction strategies,which are centered on carbon transfer,financial support,and technological assistance among cities.

关键词： industrial carbon emission intensity carbon emission social network analysis Location Indicators of Spatial Association(LISA) geographical detector multi-scale geographically weighted regression Pearl River Basin(PRB),China