检索结果-南通市图书馆

Review on inorganic and polymeric materials-coordinated metal-organic-framework photocatalysts for green hydrogen evolution

引用

journal of Energy Chemistry 2024年第5期92卷 322-356页

作者： Dong-Eun Lee Mohtaram Danish Umair Alam wan-kuen jo School of Architecture CivilEnvironmental and Energy Engineering Kyungpook National University80 Daehak-roBuk-guDaegu 41566Republic of Korea School of Chemical Engineering Yeungnam UniversityGyeongsanGyeongbuk 38541Republic of Korea

Metal-organic frameworks(MOFs)possess a distinct advantage over conventional heterogeneous photocatalysts because of their carefully defined architecture and particular pores,which facilitate the targeted incorporation of other efficient cocatalysts or semiconductor *** integration of MOFs with other materials has resulted in significant breakthroughs,as the coupled materials improve the performance due to the combined *** unique MOF structures allow them to host foreign materials,which results in harvesting the visible region of the solar spectrum and effectively mitigating charge recombination by promoting charge *** review presents an evaluation of the latest developments in the utilization of surface and/or pore chemistry of MOF-supported heterojunctions for photocatalytic green-hydrogen generation with a basic understanding of the mechanism *** review begins with the basic principles of photocatalysis,the significance of MOFs,their optical properties,the methods used for synthesizing MOFs,and their coordination with other inorganic and polymeric ***,methods to increase photocatalytic H2 evolution using MOF-supported heterojunction have been proposed as standard ***,to address environmental challenges,we highlight the future potential of MOF-supported heterojunctions for use in green-energy *** hope that this review provides guidance to researchers in the development of effective heterojunctions based on MOFs to address challenges in energy applications and catalytic processes.

关键词： Renewable energy Environmental challenge Heterojunction Water splitting Photocatalysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

2D/2D BiOIO_(3)/g-C_(3)N_(4) S-scheme hybrid heterojunction with face-to-face interfacial contact for effective photocatalytic H_(2) production and norfloxacin degradation

引用

journal of Materials Science & Technology 2023年第17期148卷 19-30页

作者： Dong-Eun Lee Satyanarayana Moru KasalaPrabhakar Reddy wan-kuen jo Surendar Tonda School of Architecture CivilEnvironmental and Energy EngineeringKyungpook National University80 Daehak-roBuk-guDaegu 41566Republic of Korea School of Advanced Sciences Vellore Institute of Technology-Andhra Pradesh(VIT-AP University)AmaravatiAndhra Pradesh 522237India Department of Chemistry and Biochemistry University of South Carolina631 Sumter StreetColumbiaSC 29208United States

A two-dimensional(2D)/2D hybrid heterojunction with face-to-face interfacial assembly is a desirable dimensionality design with significant potential for various photocatalytic applications due to the large interfacial contact area,which facilitates charge migration and ***,we developed an ef-ficient 2D/2D hybrid heterojunction consisting of BiOIO 3 nanoplates(BIO)and g-C_(3)N_(4) nanosheets(CN)using a simple but effective in situ growth method for photocatalytic aqueous antibiotic degradation and H_(2) *** face-to-face interfacial assembly of the BIO and CN components in the BIO/CN hy-brid heterojunction was verified using electron ***,the BIO/CN hybrid heterojunc-tion outperformed both the BIO and CN counterparts in terms of norfloxacin degradation and H_(2) gen-eration under simulated solar light ***,the photocatalytic performance of the hybrid catalyst remained nearly unchanged throughout five consecutive test *** exceptional performance and stability of the hybrid catalyst are attributable to its extended optical absorption range,large interfa-cial contact area provided by the face-to-face assembly in the 2D/2D hybrid configuration,and enhanced photoexcited charge separation efficiency and redox power of the separated charges,which are supported by an efficient S-scheme charge transfer *** study illuminates the rational construction of novel 2D/2D S-scheme hybrid heterojunction photocatalysts with practical applications in environmental remediation and sustainable energy generation.

关键词： g-C_(3)N_(4) BiOIO_(3) Face-to-face interface 2D/2D heterojunction S-scheme charge transfer Solar energy conversion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bifunctional S-scheme hybrid heterojunction comprising CdS nanorods and BiOIO_(3) nanosheets for efficient solar-induced antibiotic degradation and highly-selective CO_(2) reduction

引用

journal of Materials Science & Technology 2023年第30期161卷 74-87页

作者： Dong-Eun Lee Naresh Mameda Kasala Prabhakar Reddy B.Moses Abraham wan-kuen jo Surendar Tonda School of Architecture CivilEnvironmental and Energy EngineeringKyungpook National University80 Daehak-roBuk-guDaegu 41566South Korea Department of Chemistry Koneru Lakshmaiah Education FoundationVaddeswaramGunturAndhra Pradesh 522302India Department of Chemistry and Biochemistry University of South Carolina631 Sumter StreetColumbiaSC 29208United States Department of Chemical Engineering Indian Institute of Technology KanpurKanpur 208016India

The development of a bifunctional photocatalyst that can be utilized for both energy conversion and envi-ronmental remediation is of great practical *** addition,an S-scheme charge transfer process can assist a photocatalyst in efficiently separating photoexcited electrons and holes while maintaining the strong reducibility and oxidizability of the former and the latter,*** developed a bifunctional S-scheme hybrid photocatalyst comprising CdS nanorods and BiOIO_(3)(BIO) nanosheets for efficient antibi-otic degradation and cocatalyst-and sacrificial reagent-free CO_(2) *** combination of visible-light-responsive one-dimensional(1D)CdS and UV-light-responsive 2D BIO resulted in a CdS/BIO hybrid photocatalyst with effective 1D/2D(line)interfacial contact and a broadened optical absorption ***,the CdS/BIO hybrid exhibited exceptional diclofenac degradation and mineralization as well as outstanding CO_(2) reduction activity for CO production,with 95.4%CO selectivity over H_(2)*** exceptional performance of the hybrid catalyst is primarily attributed to the accelerated photoexcited charge transfer caused by the 1D/2D line interfacial contact and the high charge separation and strong redox power of the separated charges,both of which stem from the effective S-scheme charge transfer *** addition,photocorrosion of CdS was substantially mitigated,resulting in the high photocat-alytic performance of the hybrid catalyst even after repeated test *** study provides insight into the rational design of bifunctional S-scheme hybrid photocatalysts for CO_(2) reduction and pollutant degra-dation.

关键词： CdS BiOIO_(3) Bifunctional photocatalyst S-scheme mechanism Antibiotic degradation CO_(2)reduction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Visible-light-activated N-doped CQDs/g-C3N4/Bi2WO6 nanocomposites with different component arrangements for the promoted degradation of hazardous vapors

引用

journal of Materials Science & Technology 2020年第5期40卷 168-175页

作者： Mi Gyeong Kim wan-kuen jo Department of Environmental Engineering Kyungpook National University 80 University RoadBukguDaegu702-701Republic of Korea

To investigate whether the arrangement of componentsin multi-composite photocatalysts may affect their photocatalytic properties,due to different charge-transfer routes,two ternary-nanocomposite photocatalysts with different component arrangements,comprising N-doped carbon quantum dots(NCQDs),g-C3N4(CN),and Bi2WO6(BWO)(hereafter referred to as NCQDs/CN/BWO),were developed,and the photocatalytic degradation of model hazardous vapors under visible-light illumination was *** I NCQDs/CN/BWO,which was developed by the combination of NCQDs/BWO and CN,exhibited photocatalytic ability superior to that of type II NCQDs/CN/BWO,which was developed by the combination of CN/BWO and NCQDs;the superior photocatalytic ability corresponded to the dual properties of NCQDs:charge mediation and upconversion ***,the photocatalytic ability of NCQDs/CN/BWO was greater than those of the reference catalysts;in addition,this photocatalyst exhibited outstanding photochemical ***,the effects of CN/(BWO+CN)weight ratio of the CN/BWO dual nanocomposites and the NCQDs/(BWO+CN+NCQDs)weight percentage of NCQDs/CN/BWO ternary nanocomposites on the pollutant removal efficiency were *** plausible mechanisms over the two NCQDs/CN/BWO photocatalysts for the degradation of hazardous vapors were *** component arrangement approach proposed herein afforded a technique toward the perceptive development of novel multi-component heterostructures for the photocatalytic degradation of hazardous vapors.

关键词： Component arrangement Charge-transfer route NCQDs dual role Charge mediator Upconversion photoluminescence

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Photocatalytic decomposition of mobile-source related pollutants using a continuous-flow reactor

引用

journal of Environmental Sciences 2010年第3期22卷 460-466页

作者： wan-kuen jo Seung-Ho Shin Department of Environmental Engineering Kyungpook National University

This study evaluated the application of a continuous-flow photocatalytic reactor for the control of two mobile-derived pollutants, methyl-tertiary butyl ether （MTBE） and naphthalene, present at in-vehicle levels. Variables tested for this study included the hydraulic diameter （HD）, stream flow rate （SFR）, relative humidity （RH）, and feeding type （FT）. The fixed parameters included contaminant concentration, ultraviolet light source, and the weight of TiO2. In all experimental conditions the adsorption process reached equilibrium within 30 to 180 min for the target compounds, and the outlet concentrations of the photocatalytic oxidation （PCO） reactor while operating reached a steady state within 60 to 180 min. The degradation of the target compounds was dependent on RH, HD, FT, or SFR. The PCO system exhibited high degradation （up to nearly 100% for certain conditions） and mineralization efficiencies of target compounds, suggesting that this system can effiectively be employed to improve indoor air quality. Moreover, it was confirmed that trichloroethylene at urban-ambient level also could enhance the degradation efficiency of naphthalene when applying the PCO technology inside vehicles.

关键词： in-vehicle level methyl-tertiary butyl ether naphthalene trichloroethylene

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

One-dimensional titania nanotubes annealed at various temperatures for the photocatalytic degradation of low concentration gaseous pollutants

引用

Particuology 2015年第2期13卷 86-92页

作者： Ho-Hwan Chun wan-kuen jo Department of Naval Architecture and Ocean Engineering Pusan National University Department of Environmental Engineering Kyungpook National University

In this study, one-dimensional titania nanotubes （TNTs） were synthesized using a combined process of chemical and hydrothermal treatments, and their activities for the photocatalytic reactions of selected gaseous pollutants at sub-ppm levels were determined. Additionally, the properties of the TNTs were examined using selected spectroscopic methods. The annealed TNTs showed higher photocatalytic activities for the four target compounds than did the unannealed TNTs. For all the target compounds except benzene, the effect of the annealing temperature on the degradation efficiency was difficult to determine because all degradation efficiencies were very high. However, for benzene, which decomposed with a low efficiency, the degradation activities of the TNTs increased as the treatment temperature was increased from 250 to 300 ℃, while they decreased slightly when the temperature was increased from 300 to 400 ℃. These findings confirm the presence of an optimal annealing temperature for the synthesis of TNTs. Moreover, the average degradation extents for benzene, toluene, ethylbenzene, and o-xylene decreased from 92%, 96%, 99%, and 98% to 77%, 86%, 92%, and 94%, respectively, as the airstream flow rate increased within the range of 1-4L/min. The average degradation extents decreased from 12%, 75%, 87%, and 88% to 3%, 29%, 46%, and 51%, respectively, as the input concentration increased from 0.4 to 1.9 ppm. Overall, these findings suggest that one-dimensional TNTs can be effectively utilized for the degradation of gaseous pollutants under optimal operational conditions.

关键词： vGaseous pollutant Annealing temperature Degradation efficiency Airstream flow rate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Porous g-C_(3)N_(4)-encapsulated TiO_(2) hollow sphere as a high-performance Z-scheme hybrid for solar-induced photocatalytic abatement of environmentally toxic pharmaceuticals

引用

journal of Materials Science & Technology 2021年第23期82卷 21-32页

作者： Dong-Eun Lee Satyanarayana Moru wan-kuen jo Surendar Tonda School of Architecture CivilEnvironmental and Energy EngineeringKyungpook National University80 Daehak-roBuk-guDaegu41566Republic of Korea Department of Electrical and Computer Engineering Iowa State UniversityCoover HallOsborn DriveAmesIowa 50011USA Department of Physical Sciences Kakatiya Institute of Technology and ScienceWarangal506015TelanganaIndia

Herein,we rationally constructed a hybrid heterostructure comprising porous g-C_(3)N_(4)(CN)-encapsulated anatase TiO_(2) hollow spheres(TOHS)via a synthesis method that involves hydrothermal and calcination *** fabricated hybrid,termed CN/TOHS,demonstrated extraordinary activity toward the degradation of environmentally toxic pharmaceutical substances(acetaminophen and ciprofloxacin)in aqueous solutions under simulated sunlight irradiation;the activity of CN/TOHS was superior to that attained for individual TOHS and CN *** particular,the CN/TOHS hybrid containing 13.3 wt.%of CN on TOHS displayed the optimum degradation activity among the tested catalysts used in this study,and it also possessed exceptional recyclability and stability during consecutive degradation *** remarkable photocatalytic activity and stability of the hybrid were predominantly ascribed to the large solid interfacial contact between constituents,TOHS and CN,induced by effective hybrid structure,which boosted the interfacial charge transfer and impeded with the direct recombination of photo-induced ***,the results of the liquid chromatography-mass spectrometry analysis corroborated the effective mineralization of model pharmaceutical pollutants in the presence of the CN/TOHS *** simple interfacial engineering strategy presented in this study offers a potential route for the rational design of novel catalysts for application in environmental remediation and solar energy conversion.

关键词： TiO_(2)hollow sphere g-C3N4 Hybrid heterostructure Z-scheme charge transfer Pollutant degradation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

2D reduced graphene oxide-titania nanocomposites synthesized under different hydrothermal conditions for treatment of hazardous organic pollutants

引用

Particuology 2018年第1期16卷 165-173页

作者： Migyeong Kim Won-Hwa Hong Woong Kim Sung Hyuk Park wan-kuen jo Department of Environmental Engineering Kyungpook National University Daegu 702-701 Republic of Korea School of Architecture Kyungpook National University Daegu 702-701 Republic of Korea Department of Materials Science and Metallurgical Engineering Kyungpook National University Daegu 702-701 Republic of Korea

Two-dimensional reduced graphene oxide-titania （RGO-TiO2） composites were prepared using a single- step hydrothermal method under various hydrothermal reaction conditions. The morphological and surface characteristics of the RGO-TiO2 composites and reference materials were determined. The RGO-TiO2 composites showed photocatalytic activity for the decomposition of two target pollutants that was superior to both pure TiO2 and RGO under fluorescent daylight lamp illumination. The photo- catalytic activity of the RGO-TiO2 composite increased as the hydrothermal treatment time increased from 1 to 24 h, but then it decreased as the time increased to 36 h, which indicated the presence of an optimal treatment time. RGO-TiO2 composites activated by violet light-emitting diodes （LEDs） displayed lower decomposition efficiency than those activated by a daylight lamp, likely because of the lower light intensity of violet LEDs （0.2 mW/cm2） when compared with that of the daylight lamp （1.4mW/cm2）. However, the photocatalytic decomposition of the target pollutants using the RGO-TiO2 composite was more energy-efficient using the violet LEDs. The photocatalytic reaction rates increased as the residence time decreased, whereas the reverse was true for the decomposition efficiency.

关键词： TiO2 composite Continuous-flow mode Hydrothermal time VioletLight emitting diode

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

可见光响应碳掺杂的光催化剂涂覆于塞流反应器上分解气态芳香化合物(英文)

引用

催化学报 2013年第6期34卷 1256-1261页

作者： Ho‐Hwan CHUN wan‐kuen jo Department of Naval Architecture and Ocean Engineering Pusan National University63 Jangjeon‐dongGeumjeong‐guBusan 609‐735South Korea Department of Environmental Engineering Kyungpook National University80 University RoadBukguDaegu 702‐701South Korea

A plug‐flow reactor coated with carbon‐doped TiO2 (C‐TiO2 ) powder was investigated for the control of vaporous aromatics (benzene, toluene, ethylbenzene, and o‐xylene (BTEX)) under a range of experimental conditions. The characteristics of the as‐prepared C‐TiO2 and a reference Degussa P25 TiO2 powder were examined using X‐ray diffraction, scanning electron microscopy, diffuse‐reflectance ultraviolet‐visible‐near infrared spectroscopy, and Fourier transform infrared spectroscopy. The experimental conditions for the photocatalytic performance of the as‐prepared C‐TiO2 photocatalyst were controlled using three operational parameters, relative humidity, flow rate, and input concentration. Unlike other target compounds, very little benzene was removed by the C‐TiO2 photocatalyst under visible‐light irradiation. In contrast, the C‐TiO2 exhibited higher removal efficiencies for the other three target compounds (toluene, ethylbenzene, and xylene) compared with those achieved using unmodified TiO2 under visible‐light irradiation. The highest removal efficiency was obtained at a relative humidity value of 45%. Specifically, the toluene removal efficiency determined at a relative humidity of 45% was 78%, whereas it was close to 0%, 7.2%, and 5.5% for relative humidity values of 20%, 70%, and 95%, respectively. In addition, the removal efficiencies for the three target compounds decreased as the flow rate or input concentration increased. These findings indicate that the as‐prepared C‐TiO2 photocatalyst could be used for the removal of toxic vaporous aromatics under optimized operating conditions.

关键词： Photocatalysis Vaporous aromatics Benzene Toluene Ethylbenzene o‐Xylene Operational parameter Continuous treatment Indoor air control

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

铝板为基础的S掺杂TiO_2催化分解有毒有机气体(英文)

引用

催化学报 2014年第7期35卷 1189-1195页

作者： wan-kuen jo Hyun-Jung Kang Department of Environmental Engineering Kyungpook National University

S-doped TiO2(S-TiO2) films were immobilized on flexible low-cost aluminum sheets(S-TiO2-AS) using a sol-gel dipping process and low post-processing temperatures. The photocatalytic degradation of toxic organic vapors using the prepared films was evaluated using a continuous-flow glass tube under visible light exposure. The surface properties of the S-TiO2-AS and TiO2-AS films were examined by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and ultraviolet-visible spectroscopy. The photolysis of benzene, toluene, ethyl benzene, and xylene(BTEX) did not occur on the bare AS. In contrast, the photocatalytic degradation efficiencies of the target pollutants using S-TiO2-AS were higher than those obtained using reference TiO2-AS photocatalyst. In particular, the average photocatalytic degradation efficiencies of BTEX using S-TiO2-0.8-AS(S/Ti ratio = 0.8) over a 3-h process were 34%, 78%, 91%, and 94%, respectively, whereas those of TiO2-AS were 2%, 11%, 21%, and 36%, respectively. The photocatalytic decompo-sition efficiencies of BTEX under visible irradiation using S-TiO2-AS increased with increasing S/Ti ratios from 0.2 to 0.8, but decreased when the ratio further increased to 1.6. Thus, S-TiO2-AS can be prepared using optimal S/Ti ratios. The degradation of BTEX over S-TiO2-AS depended on the air flow rates and initial concentrations of the target chemical. Overall, under optimal conditions, S-TiO2-AS can be effectively applied for the purification of toxic organic vapors.

关键词： TiO2 有机气体催化分解有毒掺杂铝板光催化降解效率扫描电子显微镜

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：