检索结果-南通市图书馆

Implementation Study of a Centralized Routing Protocol for Data Acquisition in Wireless Sensor Networks

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Wireless Sensor Network 2011年第5期3卷 167-173页

作者： Trung Hieu Pham Xue Jun Li wai yee leong Peter Han Joo Chong 不详

Wireless sensor networks (WSNs) attract considerable amount of research efforts from both industry and academia. With limited power and computational capability available on a sensor node, robustness and efficiency are the main concerns when designing a routing protocol for WSNs with low complexity. There are various existing design approaches, such as data-centric approach, hierarchical approach and location-based approach, which were designed for a particular application with specific requirements. In this paper, we study the design and implementation of a routing protocol for data acquisition in WSNs. The designed routing protocol is named Centralized Sensor Protocol for Information via Negotiation (CSPIN), which essentially combines the advertise-request-transfer process and a routing distribution mechanism. Implementation is realized and demonstrated with the Crossbow MicaZ hardware using nesC/TinyOS. It was our intention to provide a hand-on study of implementation of centralized routing protocol for WSNs.

关键词： Wireless Sensor Network Three-Way Communication Centralized Sensor Protocols for Information Negotiation

hale gas reservoir modeling and production evaluation considering complex gas transport mechanisms and dispersed distribution of kerogen

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2021年第1期18卷 195-218页

作者： Jie Zeng Jishan Liu wai Li yee-Kwong leong Derek Elsworth Jianchun Guo School of Engineering The University of Western Australia35 Stirling HighwayPerthWA 6009Australia Department of Energy and Mineral Engineering G3 Center and Energy InstituteThe Pennsylvania State UniversityUniversity ParkPA 16802USA State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu 610500China

Stimulated shale reservoirs consist of kerogen,inorganic matter,secondary and hydraulic *** dispersed distribution of kerogen within matrices and complex gas flow mechanisms make production evaluation *** we establish an analytical method that addresses kerogen-inorganic matter gas transfer,dispersed kerogen distribution,and complex gas flow mechanisms to facilitate evaluating gas *** matrix element is defined as a kerogen core with an exterior inorganic *** most previous models,we merely use boundary conditions to describe kerogen-inorganic matter gas transfer without the instantaneous kerogen gas source *** is closer to real inter-porosity flow conditions between kerogen and inorganic *** diffusion,surface diffusion,adsorption/desorption,and slip corrected flow are involved in matrix gas ***-fracture coupling is realized by using a seven-region linear flow *** model is verified against a published model and field *** reveal that inorganic matrices serve as a major gas source especially at early *** provides limited contributions to production even under a pseudo-steady *** properties’influence starts from the late matrix-fracture inter-porosity flow regime,while inorganic matter properties control almost all flow regimes except the early-mid time fracture linear flow *** contribution of different linear flow regions is also documented.

关键词： Analytical solution Shale gas reservoir Well performance Kerogen and inorganic matter

Understanding the role of PIN1 in hepatocellular carcinoma

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2016年第45期22卷 9921-9932页

作者： Chi-wai Cheng Ka-wai leong Eric Tse Department of Medicine The University of Hong Kong Queen Mary Hospital

PIN1 is a peptidyl-prolyl cis/trans isomerase that binds and catalyses isomerization of the specific motif comprising a phosphorylated serine or threonine residue preceding a proline(p Ser/Thr-Pro) in proteins. PIN1 can therefore induce conformational and functional changes of its interacting proteins that are regulated by proline-directed serine/threonine phosphorylation. Through this phosphorylation-dependent prolyl isomerization, PIN1 fine-tunes the functions of key phosphoproteins(e.g., cyclin D1, survivin, β-catenin and x-protein of hepatitis B virus) that are involved in the regulation of cell cycle progression, apoptosis, proliferation and oncogenic transformation. PIN1 has been found to be over-expressed in many cancers, including human hepatocellular carcinoma(HCC). It has been shown previously that overexpression of PIN1 contributes to the development of HCC invitro and in xenograft mouse model. In this review, we first discussed the aberrant transcription factor expression, miR NAs dysregulation, PIN1 gene promoter polymorphisms and phosphorylation of PIN1 as potential mechanisms underlying PIN1 overexpression in cancers. Furthermore, we also examined the role of PIN1 in HCC tumourigenesis by reviewing the interactions between PIN1 and various cellular and viral proteins that are involved in β-catenin, NOTCH, and PI3K/Akt/mT OR pathways, apoptosis, angiogenesis and epithelial-mesenchymal transition. Finally, the potential of PIN1 inhibitors as an anti-cancer therapy was explored and discussed.

关键词： Phosphorylation Hepatocellular carcinoma PIN1 Isomerization Hepatocarcinogenesis

Size prediction of κ-carrageenan droplets formed in co-flowing immiscible liquid

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2011年第6期9卷 637-643页

作者： Jun-yee leong Tek-Kaun Lim Ravindra Pogaku Eng-Seng Chan Centre of Materials and Minerals School of Engineering and Information Technology Universiti Malaysia Sabah School of Engineering Monash University

The formation of K-carrageenan droplets in channel emulsification was experimentally investigated. The dispersed phase was vertically injected into co-flowing immiscible palm oil in the direction of gravity. This study focused on predicting K-carrageenan drop size using force balance analysis. The force balance model considers the interracial tension to be the solitary attaching force, while a combination of the drag force from the co-flowing palm oil and the body force of the extruding K-carrageenan liquid act as the detaching forces. The conventional model gave poor predictions for droplet size, with an average relative deviation of 23%. This large deviation could be attributed to necking phenomena and an underestimation of the drag force generated on the shear-thinning K-carrageenan solution. By incorporating correction factors, the average relative deviation of the force balance model dronned to 4%.

关键词： K-Carrageenan Droplet Channel emulsification Co-flowing Dripping Bioencapsulation

Effects of root morphology and anatomy on cadmium uptake and translocation in rice(Oryza sativa L.)

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2019年第1期31卷 296-306页

作者： Lu Huang wai Chin Li Nora Fung yee Tam Zhihong Ye School of Life Sciences Sun Yat-sen University Department of Science and Environmental Studies The Education University of Hong Kong State Key Laboratory in Marine Pollution and Department of Chemistry City University of Hong Kong

A clear description of the certain mechanisms of cadmium(Cd) uptake and translocation in rice(Oryza sativa L.) may help to reduce Cd accumulation in rice grain. Hydroponic experiments were carried out to determine the effects of cultivation conditions(aerated and stagnant) on the uptake, translocation and subcellular distribution of Cd in relation to the morphology and anatomy of roots in two rice genotypes with different Cd accumulations in grains. Marked differences in morphology and anatomy were observed between these two genotypes under different cultivation conditions. Genotypes with low Cd accumulation in grains tended to develop fewer root tips per root surface area, larger root porosity and more mature apoplastic barriers. The stagnant cultivation condition decreased the number of root tips per root surface area but increased root porosity and accelerated apoplastic barrier formation in root *** Cd uptake studies revealed that rice plants with fewer number of root tips per root surface area reduced root Cd uptake ability, while mature apoplastic barriers increased root Cd retention in cell walls and the symplast. Thus, the fewer number of root tips per root surface area and the earlier formation of mature apoplastic barriers led to lower Cd uptake and translocation. The results indicated that the morphology and anatomy of roots could play important roles in Cd uptake and translocation in rice, and could be influenced by both genotype and cultivation conditions. The present results would be useful in screening and planting rice plants with low Cd accumulation.

关键词： Apoplastic barriers Cadmium Rice Root morphology

Effect of non-uniform swelling on coal multiphysics during gas injection: The triangle approach

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第4期16卷 1362-1372页

作者： Yifan Huang Jishan Liu Yaoyao Zhao Derek Elsworth yee-Kwong leong Department of Chemical Engineering School of EngineeringThe University of Western Australia35 Stirling HighwayWA 6009Australia State Key Laboratory of Coal Resources & Safe Mining China University of Mining& TechnologyBeijing100803China Department of Energy and Mineral Engineering G3 Centre and Energy InstituteThe Pennsylvania State UniversityUniversity ParkPA16802USA

In current dual porosity/permeability models,there exists a fundamental assumption that the adsorption-induced swelling is distributed uniformly within the representative elementary volume (REV),irrespective of its internal structures and transient ***,both internal structures and transient processes can lead to the non-uniform *** this study,we hypothesize that the non-uniform swelling is responsible for why coal permeability in experimental measurements is not only controlled by the effective stress but also is affected by the adsorption-induced *** propose a concept of the swelling triangle composed of swelling paths to characterize the evolution of the non-uniform swelling and serve as a core link in coupled multiphysics.A swelling path is determined by a dimensionless volumetric ratio and a dimensionless swelling *** swelling paths have the same start and end point,and each swelling path represents a unique swelling *** swelling path as the diagonal of the triangle represents the case of the uniform swelling while that as the two perpendicular boundaries represents the case of the localized *** paths of all intermediate cases populate inside the *** corresponding relations between the swelling path and the response of coal multiphysics are established by a non-uniform swelling *** define this method as the triangle approach and corresponding models as swelling path-based *** proposed concept and models are verified against a long-term experimental measurement of permeability and strains under constant effective *** results demonstrate that during gas injection,coal multiphysics responses have a close dependence on the swelling path,and that in both future experiments and field predictions,this dependence must be considered.

关键词： Transient process Heterogeneity Swelling triangle Swelling path Non-uniform swelling coefficient

Polyvinylpyrrolidone-based bioink:influence of bioink properties on printing performance and cell proliferation during inkjet-based bioprinting

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bio-Design and Manufacturing 2023年第6期6卷 676-690页

作者： Wei Long Ng Xi Huang Viktor Shkolnikov Ratima Suntornnond wai yee Yeong HP-NTU Digital Manufacturing Corporate Lab Nanyang Technological University(NTU)Singapore 637460Singapore Singapore Centre for 3D Printing(SC3DP) School of Mechanical and Aerospace EngineeringNanyang Technological University(NTU)Singapore 639798Singapore HP Inc. Palo AltoCA 94304USA

Among the different bioprinting techniques,the drop-on-demand(DOD)jetting-based bioprinting approach facilitates contactless deposition of pico/nanoliter droplets ofmaterials and cells for optimal cell–matrix and cell–cell *** bioinks play a critical role in the bioprinting process,there is a poor understanding of the influence of bioink properties on printing performance(such as filament elongation,formation of satellite droplets,and droplet splashing)and cell health(cell viability and proliferation)during the DOD jetting-based bioprinting *** inert polyvinylpyrrolidone(PVP360,molecular weight=360 kDa)polymerwas used in this study to manipulate the physical properties of the bioinks and investigate the influence of bioink properties on printing performance and cell *** experimental results showed that a higher bioink viscoelasticity helps to stabilize droplet filaments before rupturing from the nozzle *** highly stretched droplet filament resulted in the formation of highly aligned“satellite droplets,”which minimized the displacement of the satellite droplets away from the predefined ***,a significant increase in the bioink viscosity facilitated droplet deposition on the wetted substrate surface in the absence of splashing and significantly improved the accuracy of the deposited main *** analysis showed that cell-laden bioinks with higher viscosity exhibited higher measured average cell viability(%),as the presence of polymer within the printed droplets provides an additional cushioning effect(higher energy dissipation)for the encapsulated cells during droplet impact on the substrate surface,improves the measured average cell viability even at higher droplet impact velocity and retains the proliferation capability of the printed *** the influence of bioink properties(e.g.,bioink viscoelasticity and viscosity)on printing performance and cell proliferation is important for the formulation

关键词： Biofabrication 3D bioprinting Drop-on-demand bioprinting Bioink properties Polyvinylpyrrolidone

Seroprevalence of Pteropine orthoreovirus (PRV) Infection among Outpatients in a Clinic in Rembau, Malaysia

在线全文

学校读者我要写书评

暂无评论

Biomedical and Environmental Sciences 2022年第8期35卷 755-759页

作者： leong wai Jing VOON Kenny WONG Siew Tung TENG Cheong Lieng leong Pooi Pooi WANG Linfa School of Medicine International Medical UniversityBukit Jalil 57000Kuala LumpurMalaysia School of Pharmacy University of Nottingham MalaysiaSemenyih 43500SelangorMalaysia Faculity of Medicine and Health Sciences Universiti Tunku Abdui RahmanKajang 43000SelangorMalaysia Programme in Emerging Infectious Diseases Duke-NUS Medical School169857 Singapore

Pteropine orthoreovirus(PRV)is an emerging zoonotic respiratory virus with the potential to spill over from fruit bats to *** belongs to the family Reoviridae,whose name is derived from an abbreviation of"respiratory enteric orphan".This family of viruses was initially not believed to cause diseases in humans and therefore was named an"orphan virus".PRV infections in humans are characterized by symptoms ranging from mild influenza-like illness to severe acute respiratory distress.

关键词： PRV abbreviation initially

CNT toughened aluminium and CFRP interface for strong adhesive bonding

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Materials Science 2022年第3期4卷 266-275页

作者： Gang Han Bo Tan Fei Cheng Binhua Wang yee-Kwong leong Xiaozhi Hu Department of Mechanical Engineering University of Western AustraliaPerthWA6009Australia Department of Chemical Engineering University of Western AustraliaPerthWA6009Australia Shaoxing Baojing Composite Materials Co. LtdShaoxing312073PR China School of Materials Science and Engineering Southwest University of Science and TechnologyMianyang621000PR China Key Laboratory of Road Construction Technology and Equipment MOEChang'an University Xi'an710064PR China

This study presents a simple technique for strengthening the adhesive-bond strength between aluminium(Al)substrate and carbon fibre reinforced polymer(CFRP) utilising resin pre-coating(RPC) with carbon nanotubes(CNTs). The CNT-containing RPC solution with 90 wt% acetone and 10 wt% resin(without hardener) was applied onto Al substrates, where micro-/nano-vertical channels had been created by chemical or mechanical surface treatments to accommodate CNTs. RPC was able to fill all micro-/nano-cavities over the Al substrate surface, then CNTs were pulled into those vertical micro-channels by the capillary action generated from acetone *** epoxy adhesive(resin + hardener) was applied after the CNT-containing RPC treatment. CNTs bridging across the interface between the adhesive joint and Al substrate and sealing of micro-/nano-cavities by RPC effectively enhanced the interfacial shear bond strength between the Al substrate and CFRP by 30–100%depending on the Al substrate surface profiles. Al substrates with two different chemical treatments were compared in this study for the effectiveness of CNT interfacial reinforcement. Results from a steel substrate after sandblasting were also included for comparison.

关键词： Shear bond strength Interfacial toughening CNT Resin pre-coating(RPC) Chemical surface treatment Aluminium/CFRP Laminate