检索结果-南通市图书馆

Preparation and characterization of Rb-doped TiO_(2) powders for photocatalytic applications

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第2期43卷 555-561页

作者： Lu Jia li-Mei yang wei Wang Song-tao Huang Zheng Xu National Engineering Laboratory of Biohydrometallurgy General Research Institute for Nonferrous MetalsBeijing100088China

TiO_(2)nanoparticles doped with different concentrations of Rb were prepared by sol–gel *** crystal structures of samples were characterized by X-ray diffraction(XRD)and transmission electron microscopy(TEM).It was confirmed by the Rietveld refinement method that the as-prepared samples crystallize in anatase phase and Rb doping induces expansion and distortion of the crystal *** with the pure TiO_(2),the Rb-doped nanoparticles have smaller crystal size and better *** rate of methylene blue was used to evaluate the photocatalytic activity of Rb–TiO_(2).It indicated that doping Rb into TiO_(2)can effectively improve the photocatalytic activity of TiO_(2)and the mechanisms were discussed in *** using the sample doped with 0.20%Rb,methylene blue degraded with the fastest rate(97%within 60 min).

关键词： Rb doping TiO_(2) Photocatalysis Sol-gel

Thermal oxidation description methodology of thermal barrier coatings on gas turbine blades considering service characteristics

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第6期37卷 410-424页

作者： Qiannan tao Yanrong WANG Dasheng wei Shun yang School of Energy and Power Engineering Beihang UniversityBeijing 100191China Jiangxi Research Institute of Beihang University Nanchang 330096China

Predicting the thickness of Thermally Grown Oxide(TGO)and the residual stresses induced by TGO growth in the Thermal Barrier Coatings(TBCs)is significant work in analyzing the failure of *** practical applications,the operating temperature,oxygen partial pressure,aluminium content in TBCs,and porosity of the topcoat affect the oxidation ***,a novel oxidation rate model is proposed to describe the effect of such *** parameters in the proposed model were fitted with isothermal degradation test data from prior ***,a method for calculating the residual stress in a disk-shaped specimen was developed based on the oxidized growth strain model and the oxidized ***,a variable-temperature oxidation experiment was performed to validate the new oxidation *** average error between the predicted and experimental thicknesses is approximately 10%,and the average error between the residual stresses is 30%.Under the variable-temperature condition,the error between the predicted thickness and the average experimental thickness is 3.9%.

关键词： Thermal barrier coatings Oxidation Gas turbine Residual stresses Sintering

Self-Healable and Stretchable PAAc/XG/Bi_(2)Se_(0.3)Te_(2.7) Hybrid Hydrogel Thermoelectric Materials

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第2期7卷 180-186页

作者： Jinmeng li Tian Xu Zheng Ma Wang li Yongxin Qian yang tao Yinchao wei Qinghui Jiang Yubo Luo Junyou yang State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

Thermoelectric power generators have attracted increasing interest in recent years owing to their great potential in wearable electronics power *** is noted that thermoelectric power generators are easy to damage in the dynamic service process,resulting in the formation of microcracks and performance ***,we prepare a new hybrid hydrogel thermoelectric material PAAc/XG/Bi_(2)Se_(0.3)Te_(2.7)by an in situ polymerization method,which shows a high stretchable and self-healable performance,as well as a good thermoelectric *** the sample with Bi_(2)Se_(0.3)Te_(2.7)content of 1.5 wt%(i.e.,PAAc/XG/Bi2Se0.3Te27(1.5 wt%)),which has a room temperature Seebeck coefficient of-0.45 mV K^(-1),and exhibits an open-circuit voltage of-17.91 mV and output power of 38.1 nW at a temperature difference of 40 *** being completely cut off,the hybrid thermoelectric hydrogel automatically recovers its electrical characteristics within a response time of 2.0 s,and the healed hydrogel remains more than 99%of its initial power *** stretchable and self-healable hybrid hydrogel thermoelectric materials show promising potential for application in dynamic service conditions,such as wearable electronics.

关键词： bismuth telluride self healing thermoelectric material

Analysis of sensitivity to hydrate blockage risk in natural gas gathering pipeline

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2723-2733页

作者： Ao-yang Zhang Meng Cai Na wei Hai-tao li Chao Zhang Jun Pei Xin-wei Wang State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum University Research Institute of Production Engineering Daqing Oilfield Co.Ltd.

During the operational process of natural gas gathering and transmission pipelines, the formation of hydrates is highly probable, leading to uncontrolled movement and aggregation of hydrates. The continuous migration and accumulation of hydrates further contribute to the obstruction of natural gas pipelines, resulting in production reduction, shutdowns, and pressure build-ups. Consequently, a cascade of risks is prone to occur. To address this issue, this study focuses on the operational process of natural gas gathering and transmission pipelines, where a comprehensive framework is established. This framework includes theoretical models for pipeline temperature distribution, pipeline pressure distribution, multiphase flow within the pipeline, hydrate blockage, and numerical solution methods. By analyzing the influence of inlet temperature, inlet pressure, and terminal pressure on hydrate formation within the pipeline, the sensitivity patterns of hydrate blockage risks are derived. The research indicates that reducing inlet pressure and terminal pressure could lead to a decreased maximum hydrate formation rate, potentially mitigating pipeline blockage during natural gas transportation. Furthermore, an increase in inlet temperature and terminal pressure, and a decrease in inlet pressure, results in a displacement of the most probable location for hydrate blockage towards the terminal station. However,it is crucial to note that operating under low-pressure conditions significantly elevates energy consumption within the gathering system, contradicting the operational goal of energy efficiency and reduction of energy consumption. Consequently, for high-pressure gathering pipelines, measures such as raising the inlet temperature or employing inhibitors, electrical heat tracing, and thermal insulation should be adopted to prevent hydrate formation during natural gas transportation. Moreover, considering abnormal conditions such as gas well production and pipeline network s

关键词： Natural gas hydrates Gathering pipeline Temperature variation Hydrate formation rate Sensitivity analysis

A star identification algorithm for rolling shutter exposure based on Hough transform

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第6期37卷 319-330页

作者： tao WANG Gangyi WANG Xinguo wei Yongyong li School of Instrumentation and Optoelectronic Engineering Beihang UniversityBeijing 100191China

The star identification algorithm usually identifies stars by angular distance ***,under high dynamic conditions,the rolling shutter effect distorts the angular distances between the measured and true star positions,leading to plethoric false matches and requiring complex and time-consuming verification for star *** identification rate hinders the application of low-noise and cost-effective rolling shutter image *** this work,we first study a rolling shutter distortion model of angular distances between stars,and then propose a novel three-stage star identification algorithm to identify distorted star images captured by the rolling shutter star *** first stage uses a modified grid algorithm with adaptive error tolerance and an expanded pattern database to efficiently eliminate spurious *** second stage performs angular velocity estimation based on Hough transform to verify the matches that follow the same distortion *** third stage applies a rolling shutter error correction method for further *** the simulation and night sky image test demonstrate the effectiveness and efficiency of our algorithm under high dynamic *** accuracy of angular velocity estimation method by Hough transform is evaluated and the root mean square error is below 0.5(°)/*** algorithm achieves a 95.7% identification rate at an angular velocity of 10(°)/s,which is much higher than traditional algorithms.

关键词： Star trackers Star identification Rolling shutter Angular velocity estimation Hough transform

Variable Selection for Generalized linear Model with Highly Correlated Covariates

在线全文

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第6期40卷 1458-1480页

作者： li li YUE wei tao WANG Gao Rong li School of Statistics and Data Science Nanjing Audit UniversityNanjing 211815P.R.China School of Mathematics Statistics and MechanicsBeijing University of TechnologyBeijing 100124P.R.China School of Statistics Beijing Normal UniversityBeijing 100875P.R.China

The penalized variable selection methods are often used to select the relevant covariates and estimate the unknown regression coefficients simultaneously,but these existing methods may fail to be consistent for the setting with highly correlated *** this paper,the semi-standard partial covariance(SPAC)method with Lasso penalty is proposed to study the generalized linear model with highly correlated covariates,and the consistencies of the estimation and variable selection are shown in high-dimensional settings under some regularity *** simulation studies and an analysis of colon tumor dataset are carried out to show that the proposed method performs better in addressing highly correlated problem than the traditional penalized variable selection methods.

关键词： Generalized linear model highly correlated covariates Lasso penalty semi-standard partial covariance variable selection

Active MoS_(2)-based electrode for green ammonia synthesis

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第1期65卷 268-275页

作者： Xin liu Lei yang tao wei Shanping liu Beibei Xiao School of Energy and Power Engineering Jiangsu University of Science and TechnologyZhenjiang 212003China Institute Charles Gerhardt Montpellier UMR-5253Universite de MontpellierCNRSENSCMPlace E.Bataillon34095 Montpellier Cedex 05France

Nitrogen electro-reduction under mild conditions is one promising alternative approach of the energyconsuming Haber-Bosch process for the artificial ammonia *** critical aspect to unlocking this technology is to discover the catalysts with high selectivity and *** this work,the N_(2)-to-NH_(3)conversion on the functional MoS_(2)is fully investigated by density functional theory calculations since the layered MoS_(2)provides the ideal platform for the elaborating copies of the nitrogenase found in nature,wherein the functionalization is achieved via basal-adsorption,basal-substitution or edge-substitution of transition metal *** results reveal that the edge-functionalization is a feasible strategy for the activity promotion;however,the basal-adsorption and basal-substitution separately suffer from the electrochemical instability and the NRR ***,MoS_(2)functionalized via edge W-substitution exhibits an exceptional *** energetically favored reaction pathway is through the distal pathway and a limiting potential is less than 0.20 ***,this work escalates the rational design of the high-effective catalysts for nitrogen fixation and provides the explanation why the predicated catalyst have a good performance,paving the guidance for the experiments.

关键词： Nitrogen reduction reaction Density functional theory calculations Molybdenum disulfide Electrochemistry Catalyst Thermodynamics

Metallurgical performance evaluation of space-weathered Chang’e-5 lunar soil

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1241-1248页

作者： Chen li Wenhui Ma yang li Kuixian wei Center for Lunar and Planetary Sciences Institute of GeochemistryChinese Academy of SciencesGuiyang 550081China Faculty of Metallurgical and Energy Engineering Kunming University of Science and TechnologyKunming 650093China

Space metallurgy is an interdisciplinary field that combines planetary space science and metallurgical *** involves systematic and theoretical engineering technology for utilizing planetary resources in ***,space metallurgy on the Moon is challenging because the lunar surface has experienced space weathering due to the lack of atmosphere and magnetic field,making the mi-crostructure of lunar soil differ from that of minerals on the *** this study,scanning electron microscopy and transmission electron microscopy analyses were performed on Chang’e-5 powder lunar soil *** microstructural characteristics of the lunar soil may drastically change its metallurgical *** main special structure of lunar soil minerals include the nanophase iron formed by the impact of micrometeorites,the amorphous layer caused by solar wind injection,and radiation tracks modified by high-energy particle rays inside mineral *** nanophase iron presents a wide distribution,which may have a great impact on the electromagnetic prop-erties of lunar *** ions injected by solar wind may promote the hydrogen reduction *** widely distributed amorph-ous layer and impact glass can promote the melting and diffusion process of lunar ***,although high-energy events on the lun-ar surface transform the lunar soil,they also increase the chemical activity of the lunar *** is a property that earth samples and tradi-tional simulated lunar soil *** application of space metallurgy requires comprehensive consideration of the unique physical and chemical properties of lunar soil.

关键词： space metallurgy Chang’e-5 lunar soil space weathering metallurgical performance

Comparative analysis of thermodynamic and mechanical responses between underground hydrogen storage and compressed air energy storage in lined rock caverns

在线全文

学校读者我要写书评

暂无评论

International Journal of Mining Science and Technology 2024年第4期34卷 531-543页

作者： Bowen Hu liyuan Yu Xianzhen Mi Fei Xu Shuchen li wei li Chao wei tao Zhang State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering China University of Mining and TechnologyXuzhou 221116China Key Laboratory of Large Structure Health Monitoring and Control Shijiazhuang Tiedao UniversityShijiazhuang 050043China School of Mechanics and Civil Engineering China University of Mining and TechnologyXuzhou 221116China

Underground hydrogen storage(UHS)and compressed air energy storage(CAES)are two viable largescale energy storage technologies for mitigating the intermittency of wind and solar ***,it is meaningful to compare the properties of hydrogen and air with typical thermodynamic storage *** study employs a multi-physical coupling model to compare the operations of CAES and UHS,integrating gas thermodynamics within caverns,thermal conduction,and mechanical deformation around rock *** thermodynamic responses are validated using additional simulations and the field test *** and pressure variations of air and hydrogen within rock caverns exhibit similarities under both adiabatic and diabatic simulation *** reaches higher temperature and pressure following gas charging stage compared to air,and the ideal gas assumption may lead to overestimation of gas temperature and *** steel lining of CAES,the sealing layer(fibre-reinforced plastic FRP)in UHS is prone to deformation but can effectively mitigates stress in the sealing *** CAES,the first principal stress on the surface of the sealing layer and concrete lining is tensile stress,whereas UHS exhibits compressive stress in the same *** present research can provide references for the selection of energy storage methods.

关键词： Underground hydrogen storage Compressed air energy storage Mechanical response Thermodynamic response lined rock caverns