检索结果-南通市图书馆

Analysis of Cotton Yarn Properties Spun on Aerodynamic Compact and Open-End Rotor Spinning

Journal of Textile Science and Technology 2021年第1期7卷 22-40页

作者： Md. Rafiqul Islam suza ahmed Md. Abubakar Siddik Sadik M. Ashique Department of Textile Engineering National Institute of Textile Engineering and Research (NITER) Nayarhat Savar Dhaka Bangladesh

This article presents a comparative analysis of the properties of cotton yarn spun on aerodynamic compact spinning and open-end rotor spinning systems. Yarn samples with a linear density of 50 Tex, 37 Tex, 30 Tex, 25 Tex, and 20 Tex were spun both on the aerodynamic compact and rotor spinning systems using the same finisher drawn sliver of medium staple cotton which were produced by a specific mixing. The quality parameters such as mass variation, imperfection index, hairiness, and tensile behavior (strength in count strength product, elongation percentage) of the yarn samples were assessed and analyzed. The results revealed that aerodynamic compact spun yarn had a lower unevenness and mass variation, a higher imperfection in case of a finer count, less hairiness, higher tensile strength, and lower elongation% compared to the open-end rotor spun yarn samples. Finally, paired- samples t-test and regression analysis were carried out by using IBM SPSS 25 to check the significance of yarn quality parameters and correlation among them.

关键词： Compact Yarn Rotor Yarn Imperfection Hairiness Tensile Strength

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Analysis of the Adsorption of Toxic Chromium (VI) by Untreated and Chitosan Treated Banana and Areca Fiber

引用

Journal of Textile Science and Technology 2020年第2期6卷 81-106页

作者： Hosne Ara Begum A. K. M. Monjurul Haque Md. Didarul Islam M. Mehedi Hasan suza ahmed Md. Razzak Ruhul Amin Khan Department of Yarn Engineering Bangladesh University of Textiles Dhaka Bangladesh Department of Applied Science & Chemical Engineering University of Dhaka Dhaka Bangladesh Department of Fabric Engineering Bangladesh University of Textiles Dhaka Bangladesh Institute of Radiation and Polymer Technology Bangladesh Atomic Energy Commission Dhaka Bangladesh

This paper work involves bunch experiments to investigate the effect of contact time, pH, and adsorbent dose on the extent of adsorption by bio-composites. Adsorption capacity of Chromium (VI) onto chitosan coated with banana and areca fiber was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, pH and adsorbent dose. The chitosan and fibers (banana and areca) were then cross-linked with glutaraldehyde to remove chromium [Cr (VI)] from water via static adsorption. It was found that optimum chromium absorption capacity of chitosan was assessed at pH of 2.5 to 4.5 and contact time of 30 to 180 minutes for raw banana and areca fiber and for chitosan treated banana & areca fiber. Though optimum adsorption of chromium of chitosan was measured 34.17 ppm (85.42%) from a 100 ml solution containing 40 parts per million (ppm) of Cr (VI) at 120 minutes, pH of 3.0 and 120 milligram (mg) adsorbent dose size, use of composite will be more favorable in the point of environmental concern as well as low cost because chitosan preparation is comparatively costly then banana and areca fiber. On the other hand, untreated banana and areca fiber optimum adsorption of chromium measured 3.65 ppm (9.1%) at 180 min and, pH of 4.5 and 140 mg adsorbent dose size and 3.76 ppm (9.4%) at 180 min, pH of 4.5 and 160 mg adsorbent dose size respectively. In case of chitosan treated banana fiber, it was observed that adsorption was increased from 17.664 to 30.057 (75.14%). On the other hand, for areca fiber with chitosan, it was observed that adsorption was increased from 21.664 to 30.156 (75.39%) ppm. The Langmuir and Freundlich adsorption models were used for the mathematical description of the adsorption of chromium ion onto composites and it was found that the Langmuir adsorption isotherm was more fitted models which mean that a monolayer adsorption surface was created. After analyzing from IBM SPSS 25 software, we got the stand

关键词： Adsorption Heavy Metal Chitosan Banana Fiber Areca Fiber Toxicity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：