检索结果-南通市图书馆

Journal of Iron and Steel Research International 2022年第11期29卷 1823-1835页

作者： Hao-chi Xu Cheng-bin shi Xin Zhu shi-jun wang Jing Li shi-zhou wang State Key Laboratory of Advanced Metallurgy University of Science and Technology Beijing(USTB)Beijing 100083China

The microstructure,eutectic carbides and intermetallic compounds in as-cast ingots with varying Nb contents produced by electroslag remelting were *** solidification behavior,microsegregation of alloying elements and its influence on precipitates were *** increase in Nb content from 0.64 to 1.40 wt.%has no effect on the dendrite morphology and secondary dendrite arm *** total area fraction of eutectic NbC and Laves phase in as-cast ingots increases with the increase in Nb *** eutectic precipitates in the ingot with 0.64 wt.%Nb are mainly NbC,and the others are Fe_(2)Nb-type Laves *** the Nb content of the steel significantly promotes the precipitation of Laves phases and lowers the precipitation temperature of NbC eutectic *** carbide M_(2)C is precipitated only in the ingot with 1.4 wt.%*** average concentration of Nb in both interdendritic and intragranular regions increases with the increase in Nb content of the steel,leading to a change in the morphology of Fe_(2)Nb-type Laves phase from honeycomb to *** the Nb content exerts little effect on the microsegregation degrees of Si,Mo,Cr and Ni in the steel.

关键词： Eutectic carbides Fe2Nb-type Laves phase Austenitic heat-resistant steel Microsegregation Electroslag remelting

Quantum Confinement in GaAs Microcrystallites Embedded in SiO_(2) Thin Film

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics Letters 1996年第10期13卷 797-800页

作者： shi wang-zhou LIN Kui-xun LIN Xuan-ying QI Zhen-zhong Institute of Material Science Shantou UniversityShantou 515063 Centre of Information Storage Shanghai Jiaotong UniversityShanghai 200030

Semiconductor GaAs microcrystallites were embedded in SiO_(2) thin films by magnetron rf cosputtering *** of the thin films were characterized by transmission electron microscopy,x-ray diffraction and x-ray photoelectron *** size of microcrystallites,depending on the substrate temperature during deposition,is *** spectra of the films were *** shift of absorption edge was observed and discussed according to quantum confinement effect.

关键词： technique. Quantum Embedded

Using a Surface Plasmon Resonance Biosensor for Rapid Detection of Salmonella Typhimurium in Chicken Carcass

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2008年第3期5卷 239-246页

作者： Yu-bin Lan shi-zhou wang Yong-guang Yin W. Clint Hoffmann Xian-zhe Zheng USDA-ARS College Station TX77845 USA Department of Environmental and Occupational Health Texas A＆M University College Station TX 77845 USA College of Biological and Agricultural Engineering Jilin University Changchun 130022 P. R. China College of Engineering Northeast Agricultural University Harbin 150030 P. R. China

Chicken is one of the most popular meat products in the world. Salmonella Typhimurium is a common foodbome pathogens associated with the processing of poultry. An optical Surface Plasmon Resonance （SPR） biosensor was sensitive to the presence of Salmonella Typhimurium in chicken carcass. The Spreeta biosensor kits were used to detect Salmonella Typhimurium on chicken carcass successfully. A taste sensor like electronic tongue or biosensors was used to basically ＂taste＂ the object and differentiated one object from the other with different taste sensor signatures. The surface plasmon resonance biosensor has potential for use in rapid, real-time detection and identification of bacteria, and to study the interaction of organisms with dif- ferent antisera or other molecular species. The selectivity of the SPR biosensor was assayed using a series of antibody con- centrations and dilution series of the organism. The SPR biosensor showed promising to detect the existence of Salmonella Typhimurium at 1 x 106 CFU/ml. Initial results show that the SPR biosensor has the potential for its application in pathogenic bacteria monitoring. However, more tests need to be done to confirm the detection limitation.

关键词： biosensor Salmonella Typhimurium food safety chicken carcass detection limitation Surface Plasmon Resonance

Numerical design of an efficient Ho^(3+)-doped InF3 fiber laser at~3.2μm

在线全文

学校读者我要写书评

暂无评论

Journal of Electronic Science and Technology 2024年第3期22卷 35-46页

作者： shi-Yuan zhou Hong-Yu Luo Ya-zhou wang Yong Liu State Key Laboratory of Electronic Thin Films and Integrated Devices School of Optoelectronic Science and EngineeringUniversity of Electronic Science and Technology of ChinaChengdu611731China DTU Electro Technical University of DenmarkKongens Lyngby2800Denmark

In this work,we theoretically unlock the potential of Ho^(3+)-doped InF3 fiber for efficient~3.2μm laser generation(from the 5F4,5S2→5F5 transition),by employing a novel dual-wavelength pumping scheme at 1150 nm and 980 nm,for the first *** clad-coupled 1150 nm pumping of 5 W,~3.2μm power of 3.6 W has been predicted with the optical-to-optical efficiency of 14.4%.Further efficient power scaling,however,is blocked by the output saturation with 980 nm *** alleviate this behavior,the cascaded 5I5→5I6 transition,targeting~3.9μm,has been activated simultaneously,therefore accelerating the population circulation between the laser upper level 5F4,5S2 and long-lived 5I6 level under 980 nm *** a result,enhanced~3.2μm power of 4.68 W has been obtained with optical-to-optical efficiency of 15.6%.Meanwhile the~3.9μm laser,yielding power of 2.76 W with optical-to-optical efficiency of 9.2%,is theoretically achievable as well with a moderate heat load,of which the performance is even better than the prior experimentally and theoretically reported Ho^(3+)-doped InF3 fiber lasers emitting at~3.9μm *** work demonstrates a versatile platform for laser generation at~3.2μm and~3.9μm,thus providing the new opportunities for many potential applications,e.g.,polymer processing,infrared countermeasures,and free-space communications.

关键词： Cascaded Fiber laser Holmium Mid-infrared

High-dimensional uncertainty quantification of projectile motion in the barrel of a truck-mounted howitzer based on probability density evolution method

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 209-221页

作者： Mingming wang Linfang Qian Guangsong Chen Tong Lin Junfei shi shijie zhou Nanjing University of Science and Technology Nanjing 210094JiangsuChina Northwest Institute of Mechanical and Electrical Engineering Xianyang 712099ShaanxiChina Nanjing Vocational University of Industry Technology Nanjing 210023JiangsuChina

This paper proposed an efficient research method for high-dimensional uncertainty quantification of projectile motion in the barrel of a truck-mounted ***,the dynamic model of projectile motion is established considering the flexible deformation of the barrel and the interaction between the projectile and the ***,the accuracy of the dynamic model is verified based on the external ballistic projectile attitude test ***,the probability density evolution method(PDEM)is developed to high-dimensional uncertainty quantification of projectile *** engineering example highlights the results of the proposed method are consistent with the results obtained by the Monte Carlo Simulation(MCS).Finally,the influence of parameter uncertainty on the projectile disturbance at muzzle under different working conditions is *** results show that the disturbance of the pitch angular,pitch angular velocity and pitch angular of velocity decreases with the increase of launching angle,and the random parameter ranges of both the projectile and coupling model have similar influence on the disturbance of projectile angular motion at muzzle.

关键词： Truck-mounted howitzer Projectile motion Uncertainty quantification Probability density evolution method

Geometric quality evaluation of three-dimensional printable concrete using computational fluid dynamics

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第7期18卷 963-976页

作者： Weijiu CUI Haijun SUN Jiangang zhou Sheng wang Xinyu shi Yaxin TAO Department of Civil Engineering Qingdao University of TechnologyQingdao 266000China Innovation Institute for Sustainable Maritime Architecture Research and Technology Qingdao University of TechnologyQingdao 266000China Intelligent Construction Lab Qingdao University of TechnologyQingdao 266000China Shandong Zhaojin Industrial Development Co. Ltd.Yantai 264000China Architectural Engineering Institute Weifang Engineering Vocational CollegeWeifang 261000China Qingjian Group Co. Ltd.Qingdao 266000China College of Architecture and Urban Planning Qingdao University of TechnologyQingdao 266000China Department of Structural Engineering and Building Materials Ghent UniversityGhent 9000Belgium Institute of Building Materials ETH ZurichZurich 8064Switzerland

The importance of geometrical control of three dimensional(3D)printable concrete without the support of formwork is widely *** this study,a numerical model based on computational fluid dynamics was developed to evaluate the geometrical quality of a 3D printed *** numerical results were compared,using image analysis,with physical cross-sectional sawn *** influence of printing parameters(printing speed,nozzle height,and nozzle diameter)and the rheological behavior of printed materials(yield stress),on the geometrical quality of one printed layer was *** addition,the yield zone of the printed layer was analyzed,giving insights on the critical factors for geometrical control in 3D concrete *** indicated that the developed model can precisely describe the extrusion process,as well as the cross-sectional quality.

关键词： digital fabrication 3D concrete printing geometric quality computational fluid dynamics printing parameters yield stress

Aberration correction for deformable-mirror-based remote focusing enables high-accuracy whole-cell super-resolution imaging

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Photonics Research 2024年第4期12卷 821-832页

作者： WEI shi YINGCHUAN HE JIANLIN wang LULU zhou JIANWEI CHEN LIWEI zhou ZEYU XI ZHEN wang KE FANG YIMING LI Department of Biomedical Engineering Southern University of Science and TechnologyShenzhen 518055China

Single-molecule localization microscopy(SMLM)enables three-dimensional(3D)investigation of nanoscale structures in biological samples,offering unique insights into their ***,traditional 3D super-resolution microscopy using high numerical aperture(NA)objectives is limited by imaging depth of field(DOF),restricting their practical application to relatively thin biological ***,we developed a unified solution for thick sample super-resolution imaging using a deformable mirror(DM)which served for fast remote focusing,optimized point spread function(PSF)engineering,and accurate aberration *** effectively correcting the system aberrations introduced during remote focusing and sample aberrations at different imaging depths,we achieved high-accuracy,large DOF imaging(~8μm)of the whole-cell organelles[i.e.,nuclear pore complex(NPC),microtubules,and mitochondria]with a nearly uniform resolution of approximately 35 nm across the entire cellular volume.

关键词： enable mirror resolution

Nanofluidic memristor based on the elastic deformation of nanopores with nanoparticle adsorption

在线全文

学校读者我要写书评

暂无评论

National Science Review 2024年第04期11卷 46-54页

作者： Xi zhou Yuanyuan Zong Yongchang wang Miao Sun Deli shi Wei wang Guanghua Du Yanbo Xie Department of Chemistry and Chemical Engineering Northwestern Polytechnical University School of Physical Science and Technology Northwestern Polytechnical University School of Aeronautics and Institute of Extreme Mechanics Northwestern Polytechnical University Institute of Modern Physics Chinese Academy of Sciences

The memristor is the building block of neuromorphic computing. We report a new type of nanofluidic memristor based on the principle of elastic strain on polymer nanopores. With nanoparticles absorbed at the wall of a single conical polymer nanopore, we find a pinched hysteresis of the current within a scanning frequency range of 0.01–0.1 Hz, switching to a diode below 0.01 Hz and a resistor above 0.1 Hz. We attribute the current hysteresis to the elastic strain at the tip side of the nanopore, caused by electrical force on the particles adsorbed at the inner wall surface. Our simulation and analytical equations match well with experimental results, with a phase diagram for predicting the system transitions. We demonstrate the plasticity of our nanofluidic memristor to be similar to a biological synapse. Our findings pave a new way for ionic neuromorphic computing using nanofluidic memristors.

关键词： nanofluidics memristor neurocomputing elastic deformation

Effects of the windshield inclination angle on head/brain injuries in car-to-pedestrian collisions using computational biomechanics models

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Transportation Safety and Environment 2024年第2期6卷 1-12页

作者： Fang wang Mingliang wang Lin Hu Ke Peng Jiajie Yin Danqi wang Liangliang shi zhou zhou School of Automotive and Mechanical Engineering Changsha University of Science and TechnologyChangsha 410114HunanChina Hunan Province Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle Changsha University of Science and TechnologyChangsha 410114HunanChina State Key Laboratory of Vehicle NVH and Safety Technology China Automotive Engineering Research Institute Co.Ltd.Chongqing 401122China Division of Neuronic Engineering KTH Ro y al Institute of TechnologyStockholm 14152Sweden

Car-to-pedestrian collision(CPC)accidents occur frequently,and pedestrians often suffer serious head/brain *** major cause is the primary impact with the ***,we use an umerical sim ulation method to study the influence of the windshield in-clination angle of a passenger car on pedestrian head/brain injury due to CPC *** range of the windshield inclination angle was set at 24°-50°,with an interval of 2°.The results show that the windshield angle significantly affects the pedestrian kine-matics and exerts different effects on the head injury when evaluating with various head injury *** the head peak linear/rotational acceleration and acceleration-based head injury criterion(HIC)/rotational injury criterion(RIC),the predictions at the secondary impact stage have no clear relationship with the windshield angle(R^(2)=0.04,0.07,0.03 and 0.26,respectively)and their distributions are *** the primary impact,the peak linear acceleration and HIC show a weak trend of first decreasing and then increasing with the increasing of the windshield angle,and the rotational acceleration and RIC tend to remain relatively *** the cum ulative strain dama ge measure(CSDM)criterion,the predictions at the primary impact are slightly lower than those at the secondary impact,and the trend of first decreasing and then increasing with the increase in the windshield angle is observed at both impact *** the windshield inclination angle is approximately 32°-40°,the head injury severity in both impact phases is generally lower than that predicted at other windshield angles.

关键词： car-to-pedestrian collision(CPC) head/brain injury head injury criterion(HIC) windshield inclination angle computa-tional biomechanics model(CPCBM)

Two-Staged Method for Ice Channel Identification Based on Image Segmentation and Corner Point Regression

在线全文

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第2期38卷 313-325页

作者： DONG Wen-bo zhou Li DING shi-feng wang Ai-ming CAI Jin-yan School of Naval Architecture and Ocean Engineering Jiangsu University of Science and TechnologyZhenjiang 212003China School of Naval Architecture Ocean and Civil EngineeringShanghai Jiao Tong UniversityShanghai 200240China

Identification of the ice channel is the basic technology for developing intelligent ships in ice-covered waters,which is important to ensure the safety and economy of *** the Arctic,merchant ships with low ice class often navigate in channels opened up by *** in the ice channel often depends on good maneuverability skills and abundant experience from the captain to a large *** ship may get stuck if steered into ice fields off the *** this circumstance,it is very important to study how to identify the boundary lines of ice channels with a reliable *** this paper,a two-staged ice channel identification method is developed based on image segmentation and corner point *** first stage employs the image segmentation method to extract channel *** the second stage,an intelligent corner regression network is proposed to extract the channel boundary lines from the channel region.A non-intelligent angle-based filtering and clustering method is proposed and compared with corner point regression *** training and evaluation of the segmentation method and corner regression network are carried out on the synthetic and real ice channel *** evaluation results show that the accuracy of the method using the corner point regression network in the second stage is achieved as high as 73.33%on the synthetic ice channel dataset and 70.66%on the real ice channel dataset,and the processing speed can reach up to 14.58frames per second.

关键词： ice channel ship navigation identification image segmentation corner point regression