检索结果-南通市图书馆

Dragonfly Interaction Algorithm for Optimization of Queuing Delay in Industrial Wireless Networks

Journal of Bionic Engineering 2024年第1期21卷 447-485页

作者： Sanjay Bhardwaj Da-Hye kim Dong-seong kim Department of IT Convergence Engineering ICT Convergence Research CenterKumoh National Institute of TechnologyGumiSouth Korea

In industrial wireless networks,data transmitted from source to destination are highly *** often leads to the queuing of the data,and poor management of the queued data results in excessive delays,increased energy consumption,and packet ***,a nature-inspired-based Dragonfly Interaction Optimization Algorithm(DMOA)is proposed for optimization of the queue delay in industrial wireless *** term“interaction”herein used is the characterization of the“flying movement”of the dragonfly towards damselflies(female dragonflies)for *** a result,interaction is represented as the flow of transmitted data packets,or traffic,from the source to the base *** includes each and every feature of dragonfly movement as well as awareness of the rival dragonflies,predators,and damselflies for the desired optimization of the queue *** features are juxtaposed as noise and interference,which are further used in the calculation of industrial wireless metrics:latency,error rate(reliability),throughput,energy efficiency,and fairness for the optimization of the queue *** analysis,convergence analysis,the Wilcoxon test,the Friedman test,and the classical as well as the 2014 IEEE Congress of Evolutionary Computation(CEC)on the benchmark functions are also used for the evaluation of DMOA in terms of its robustness and *** results demonstrate the robustness of the proposed algorithm for both classical and benchmarking functions of the IEEE CEC ***,the accuracy and efficacy of DMOA were demonstrated by means of the convergence rate,Wilcoxon testing,and ***,fairness using Jain’s index in queue delay optimization in terms of throughput and latency,along with computational complexity,is also evaluated and compared with other *** results show that DMOA exceeds other bio-inspired optimization algorithms in terms of fairness in queue delay management and average packet *** proposed a

关键词： Dragonfly Damselfly Interaction Queuing delay Optimization Industrial wireless networks

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tracking of horizontal alignment of the long and large diameter uncharged hole in NATM tunnel

引用

Underground Space 2024年第3期16卷 18-28页

作者： Min-seong kim Sean Seungwon Lee Department of Energy and Resources Engineering Chonnam National UniversityGwangju 61186Republic of Korea Department of Earth Resources and Environmental Engineering Hanyang UniversitySeoul 04763Republic of Korea

The long and large diameter uncharged hole boring(LLB)method is a cut blasting method that minimizes blast-induced vibrations by creating long and large diameter uncharged holes at the excavation face of tunnels prior to tunnel *** in this method typically uses a 50 m long with a 382 mm diameter hammer bit in the horizontal direction at the tunnel ***,the significant weight and uni-directional rotation of the rod head,as well as variables such as geological characteristics,machine conditions,and inexperienced operators result in significant deviation from the target borehole alignment that hinders the vibration-dampening effect of the uncharged ***,since there is no method to verify the alignment of the boreholes until main tunnel construction,borehole misalignment is often not discovered until weeks after construction,which requires tunnel construction to cease until the equipment can be remobilized and an additional borehole be created,causing significant delays and increased costs for the entire tunnel *** this study,the borehole alignment tracking and ground exploration system(BGS)is developed to predict and monitor the quality and alignment of boreholes for cut blasting methods such as the LLB methods immediately after *** BGS was subsequently tested at a subway construction site to evaluate its performance in the *** measurements yielded by the BGS were compared with manually measured boring positions at every 5 m along the *** the BGS showed a maximum deviation of approximately 12%at a local point where the hole surface was relatively rough,the accuracy for the final boring position was approximately 97%,demonstrating excellent precision of the alignment tracking *** BGS demonstrates excellent performance in predicting ground conditions and the boring quality of a cut hole immediately after drilling,and shows promise in various other applications for monitoring borehole alignment.

关键词： Tunnel blasting LLB method Drilling deviation Vertical sagging Horizontal alignment tracking BGS

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Ectopic peritoneal paragonimiasis mimicking tuberculous peritonitis:A care report

引用

World Journal of Clinical Cases 2022年第16期10卷 5359-5364页

作者： Jung Woo Choi Chang Min Lee seong je kim Se In Hah Ji Yoon Kwak Hyun Chin Cho Chang Yoon Ha Woon Tae Jung Ok Jae Lee Department of Internal Medicine Gyeongsang National University College of Medicine and Gyeongsang National University HospitalJinju 52727South Korea Institute of Health Sciences Gyeongsang National UniversityJinju 52828South Korea

BACKGROUND The most common site of paragonimiasis is in the *** migratory route passes through the duodenal wall,peritoneum,and diaphragm to the lungs;thus,the thoracic cavity and central nervous system,as well as the liver,intestine,and abdominal cavity may be ***,we present a case of intraperitoneal paragonimiasis without other organ involvement,mimicking tuberculous *** SUMMARY A 57-year-old man presented with recurrent abdominal pain for 4 *** examination revealed tenderness in the right lower *** findings showed complete blood counts within the normal range without *** reactive lymph nodes and diffuse peritoneal infiltration were noted on abdominal computed tomography(CT).There were no abnormalities on chest CT or *** findings of diagnostic laparoscopy for the differential diagnosis of tuberculous peritonitis and peritoneal carcinomatosis included multiple small whitish nodules and an abscess in the *** reports confirmed the presence of numerous eggs of Paragonimus westermani(***).A postoperative serum enzyme-linked immunosorbent assay revealed *** *** and repetitive history-taking led him to retrospectively recall the consumption of freshwater *** 3 d of treatment with praziquantel(1800 mg;25 mg/kg),he recovered from all *** In patients who require diagnostic laparoscopy for the differential diagnosis of tuberculous peritonitis and peritoneal carcinomatosis,repetitive history-taking and preoperative serologic antibody tests against Paragonimus may be helpful in diagnosing intraperitoneal paragonimiasis without other organ involvement.

关键词： Differential diagnoses Intraperitoneal abscess Paragonimiasis Paragonimus westermani Peritonitis Tuberculosis Case report

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Incorporation of Ionic Conductive Polymers into Sulfide Electrolyte-Based Solid-State Batteries to Enhance Electrochemical Stability and Cycle Life

引用

Energy & Environmental Materials 2024年第6期7卷 4-12页

作者： Juhyoung kim Woonghee Choi seong-Ju Hwang Dong Wook kim Advanced Materials Division Korea Research Institute of Chemical Technology(KRICT)Daejeon 34114Korea Department of Material Science and Engineering Yonsei UniversitySeoul 03722Korea Department of Material Science and Engineering Seoul National UniversitySeoul 08826Korea Advanced Materials and Chemical Engineering University of Science and Technology(UST)Daejeon 34113Korea

Sulfide-based inorganic solid electrolytes are promising materials for high-performance safe solid-state *** high ion conductivity,mechanical characteristics,and good processability of sulfide-based inorganic solid electrolytes are desirable properties for realizing high-performance safe solid-state batteries by replacing conventional liquid ***,the low chemical and electrochemical stability of sulfide-based inorganic solid electrolytes hinder the commercialization of sulfide-based safe solid-state ***,the instability of sulfide-based inorganic solid electrolytes is intensified in the cathode,comprising various *** this study,carbonate-based ionic conductive polymers are introduced to the cathode to protect cathode materials and suppress the reactivity of sulfide *** instruments,including electrochemical spectroscopy,X-ray photoelectron spectroscopy,and scanning electron microscopy,confirm the chemical and electrochemical stability of the polymer electrolytes in contact with sulfide-based inorganic solid ***-based solid-state cells show stable electrochemical performance over 100 cycles when the ionic conductive polymers were applied to the cathode.

关键词： composite cathode electrochemical stability ionic conductive polymer solid-state battery sulfide solid electrolyte

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Liquid crystal-integrated metasurfaces for an active photonic platform

引用

Opto-Electronic Advances 2024年第6期7卷 5-29页

作者： Dohyun Kang Hyeonsu Heo Younghwan Yang Junhwa seong Hongyoon kim Joohoon kim Junsuk Rho Department of Mechanical Engineering Pohang University of Science and Technology(POSTECH)Pohang 37673Republic of Korea Department of Chemical Engineering Pohang University of Science and Technology(POSTECH)Pohang 37673Republic of Korea Department of Electrical Engineering Pohang University of Science and Technology(POSTECH)Pohang 36763Republic of Korea POSCOPOSTECH-RIST Convergence Research Center for Flat Optics and Metaphotonics Pohang 37673Republic of Korea National Institute of Nanomaterials Technology(NINT) Pohang 37673Republic of Korea

Metasurfaces have opened the door to next-generation optical devices due to their ability to dramatically modulate electromagnetic waves at will using periodically arranged ***,metasurfaces typically have static optical responses with fixed geometries of nanostructures,which poses challenges for implementing transition to technology by replacing conventional optical *** solve this problem,liquid crystals(LCs)have been actively employed for designing tunable metasurfaces using their adjustable birefringent in real ***,we review recent studies on LCpowered tunable metasurfaces,which are categorized as wavefront tuning and spectral *** to numerous reviews on tunable metasurfaces,this review intensively explores recent development of LC-integrated *** the end of this review,we briefly introduce the latest research trends on LC-powered metasurfaces and suggest further directions for improving *** hope that this review will accelerate the development of new and innovative LC-powered devices.

关键词： tunable metasurface liquid crystal active metasurface electrically tunable optical system

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Functionally graded structure of a nitride-strengthened Mg_(2)Si-based hybrid composite

引用

Journal of Magnesium and Alloys 2024年第3期12卷 1239-1256页

作者： jeongho Yang Woongbeom Heogh Hogi Ju Sukhyun Kang Tae-Sik Jang Hyun-Do Jung Mohammad Jahazi Seung Chul Han seong je Park Hyoung Seop kim Susmita Bose Amit Bandyopadhyay Martin Byung-Guk Jun Young Won kim Dae-kyeom kim Rigoberto CAdvincula Clodualdo Aranas Jr Sang Hoon kim School of Mechanical Engineering Pusan National UniversityBusan 46241Republic of Korea Department of Mechanical Design Engineering Hanyang UniversitySeoul 04763Republic of Korea Process Research 3 Team LG Display Co.Ltd.PajuGyeonggi-do 10845Republic of Korea Department of Materials Science and Engineering Chosun UniversityGwangju 61452Republic of Korea Institute of Well-Aging Medicare&Chosun University LAMP Center Chosun UniversityGwangju 61452Republic of Korea Division of Materials Science and Engineering Hanyang UniversitySeoul 04763Republic of Korea Department of Mechanical Engineering École de Technologie SupérieureMontrealQuebec H3C 1K3Canada Material&Component Convergence R&D Center Korea Construction Equipment Technology InstituteGunsanJeollabuk-do 54002Republic of Korea School of Mechanical and Aerospace Engineering Nanyang Technological UniversitySingapore 639798Singapore Graduate Institute of Ferrous&Eco Materials Technology Pohang University of Science and TechnologyPohangGyeongsangbuk-do 37673Republic of Korea Advanced Institute for Materials Research Tohoku UniversitySendai 980-8577Japan Institute for Convergence Research and Education in Advanced Technology Yonsei UniversitySeoul 03722Republic of Korea School of Mechanical and Materials Engineering Washington State UniversityPullmanWashington 99164USA School of Mechanical Engineering Purdue UniversityWest LafayetteIndiana 47907USA Research Institute of Advanced Manufacturing Technology Korea Institute of Industrial TechnologyIncheon 21999Republic of Korea Department of Macromolecular Science and Engineering Case Western Reserve UniversityClevelandOhio 44106USA Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials University of TennesseeKnoxvilleTennessee 37996USA Center for Nanophase Materials and Sciences Oak Ridge National LaboratoryOak RidgeTennessee 37830USA Department of Mechanical Engineering University of New BrunswickFrederictonNew Brunswick E3B 5A3Cana

The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed *** is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid *** study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive *** strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid ***,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional *** outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.

关键词： Laser powder bed fusion Mg_(2)Si-SiC/nitride hybrid composite Both the thermal diffusion-and chemical reaction-based metallurgy Functionally graded structure Compositional gradient Wear resistance.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Tailoring Classical Conditioning Behavior in TiO_(2) Nanowires:ZnO QDs-Based Optoelectronic Memristors for Neuromorphic Hardware

引用

Nano-Micro Letters 2024年第7期16卷 265-280页

作者： Wenxiao Wang Yaqi Wang Feifei Yin Hongsen Niu Young-Kee Shin Yang Li Eun-seong kim Nam-Young kim School of Information Science and Engineering University of JinanJinan 250022People’s Republic of China RFIC Centre NDAC CentreKwangwoon UniversityNowon-guSeoul 139-701South Korea Department of Electronics Engineering Kwangwoon UniversityNowon-GuSeoul 139-701South Korea School of Microelectronics Shandong UniversityJinan 250101People’s Republic of China Department of Molecular Medicine and Biopharmaceutical Sciences Seoul National UniversitySeoul 08826South Korea

Neuromorphic hardware equipped with associative learn-ing capabilities presents fascinating applications in the next generation of artificial ***,research into synaptic devices exhibiting complex associative learning behaviors is still ***,an optoelec-tronic memristor based on Ag/TiO_(2) Nanowires:ZnO Quantum dots/FTO was proposed and constructed to emulate the biological associative learning *** implementation of synaptic behaviors,including long and short-term plasticity,and learning-forgetting-relearning behaviors,were achieved in the device through the application of light and electrical *** the optoelectronic co-modulated characteristics,a simulation of neuromorphic computing was conducted,resulting in a handwriting digit recognition accuracy of 88.9%.Furthermore,a 3×7 memristor array was constructed,confirming its application in artificial visual *** importantly,complex biological associative learning behaviors were emulated by mapping the light and electrical stimuli into conditioned and unconditioned stimuli,*** training through associative pairs,reflexes could be triggered solely using light ***-sively,under specific optoelectronic signal applications,the four features of classical conditioning,namely acquisition,extinction,recovery,and generalization,were elegantly *** work provides an optoelectronic memristor with associative behavior capabilities,offering a pathway for advancing brain-machine interfaces,autonomous robots,and machine self-learning in the future.

关键词： Artificial intelligence Classical conditioning Neuromorphic computing Artificial visual memory Optoelectronic memristors ZnO Quantum dots

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Vastly Synergistic Fe_(2)CuNiS_(4)-Nanoarchitectures Anchored 2D-Nano-Sandwich Derived from Flower-Like-CuFeS_(2)/N-Graphene and Cube-Like-NiFeS_(2)/N-CNTs for Water Oxidation and Nitrophenol Reduction

引用

Energy & Environmental Materials 2024年第6期7卷 274-289页

作者： Gopiraman Mayakrishnan Ramkumar Vanaraj Junpeng Xiong Muhammad Farooq Azeem Ullah Keqin Zhang seong Cheol kim Ick Soo kim Nano Fusion Technology Research Group Division of Molecules and PolymersInstitute for Fiber Engineering(IFES)Interdisciplinary Cluster for Cutting Edge Research(ICCER)Shinshu UniversityTokida 3-15-1UedaNagano 386-8567Japan School of Chemical Engineering Yeungnam UniversityGyeongsan 38541Korea Graduate School of Medicine Scienceand TechnologyShinshu UniversityTokida 3-15-1UedaNagano 386-8567Japan National Engineering Laboratory for Modern Silk College of Textile and Clothing EngineeringSoochow UniversitySuzhou 215123China

Surface area,pore properties,synergistic behavior,homogenous dispersion,and interactions between carbon matrix and metal-nanostructures are the key factors for achieving the better performance of carbon-metal based(electro)***,the traditional hydro-or solvothermal preparation of(electro)catalysts,particularly,bi-or tri-metallic nanostructures anchored graphene(G)or carbon nanotubes(CNTs),often pose to poor metal–support interaction,low synergism,and patchy *** first,bimetallic flower-like-CuFeS_(2)/NG and cube-like-NiFeS_(2)/NCNTs nanocomposites were prepared by solvothermal *** resultant bimetallic nanocomposites were employed to derive the 2D-nano-sandwiched Fe_(2)CuNiS_(4)/NGCNTs-SW(electro)catalyst by a very simple and green urea-mediated“mix-heat”*** desired physicochemical properties of Fe_(2)CuNiS_(4)/NGCNTs-SW such as multiple active sites,strong metal-support interaction,homogenous dispersion and enhanced surface area were confirmed by various microscopic and spectroscopic *** the best of our knowledge,this is the first urea-mediated“mix-heat”method for preparing 2D-nano-sandwiched carbon-metal-based(electro)*** Fe_(2)CuNiS_(4)/NGCNTs-SW was found to be highly effective for alkaline-mediated oxygen evolution reaction at low onset potential of 284.24 mV,and the stable current density of 10 mA cm^(−2) in 1.0 m KOH for 10 ***,the Fe_(2)CuNiS_(4)/NGCNTs-SW demonstrated excellent catalytic activity in the reduction of 4-nitrophenol with good kapp value of 87.71×10^(−2)s^(-1)and excellent reusability over five ***,the developed urea-mediated“mix-heat”method is highly efficient for the preparation of metal-nanoarchitectures anchored 2D-nano-sandwiched(electro)catalysts with high synergism,uniform dispersion and excellent metal-support interaction.

关键词： (electro)catalyst metal-sulfide nanoarchitectures mix-heat N-graphene/NCNTs synergistic effect urea

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Random pinhole attenuator for high-power laser beams

引用

High Power Laser Science and Engineering 2024年第3期12卷 116-121页

作者： seong Cheol Park Hyeok Yun Jin Woo Yoon seong Ku Lee Jae Hee Sung Il Woo Choi Chang Hee Nam Kyung Taec kim Department of Physics and Photon Science Gwangju Institute of Science and TechnologyGwangjuRepublic of Korea Center for Relativistic Laser Science Institute for Basic ScienceGwangjuRepublic of Korea Advanced Photonics Research Institute Gwangju Institute of Science and TechnologyGwangjuRepublic of Korea

The intensity attenuation of a high-power laser is a frequent task in the measurements of optical *** intensity can be attenuated by inserting an optical element,such as a partial reflector,polarizer or absorption *** devices are,however,not always easily applicable,especially in the case of ultra-high-power lasers,because they can alter the characteristics of a laser beam or become easily *** this study,we demonstrated that the intensity of a laser beam could be effectively attenuated using a random pinhole attenuator(RPA),a device with randomly distributed pinholes,without changing the beam *** this device,a multi-PW laser beam was successfully attenuated and the focused beam profile was measured without any alterations of its *** addition,it was confirmed that the temporal profile of a laser pulse,including the spectral phase,was ***,the RPA possesses significant potential for a wide range of applications.

关键词： high-power laser intensity attenuation laser diagnostics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of pre-twinning and heat treatment on formability of AZX311 Mg alloy

引用

Journal of Magnesium and Alloys 2024年第3期12卷 1154-1169页

作者： Mahesh Panchal Lalit Kaushik Min-seong kim Ravi Kottan Renganayagalu Shi-Hoon Choi Jaiveer Singh Department of Mechanical Engineering Indian Institute of Technology JodhpurKarwarJodhpur 342030RajasthanIndia Department of Metallurgical and Materials Engineering Indian Institute of Technology JodhpurKarwarJodhpur 342030RajasthanIndia Energy Materials Research Center Korea Institute of Science and Technology(KIST)5 Hwarang-roSeongbuk-guSeoul 02792Republic of Korea Department of Advanced Components and Materials Engineering Sunchon National University255 Jungang-roSuncheonJeonnam 57922Republic of Korea

In this study,the effects of pre-strain-induced tensile twins(TTWs)and controlled heat treatment on the formability behavior of AZX311 Mg alloy sheets were investigated.A 4%compressive strain was applied to pre-strain the sheets using the in-plane compression(IPC)technique along the rolling direction(RD)to introduce *** pre-strained(PS)samples were subsequently heat-treated at 250℃,350℃,and 400℃ independently for 1 hr,and are termed as PSA1,PSA2,and PSA3,*** cupping tests were conducted to assess the formability of the sheet samples under different initial *** results showed that the PS sample heat-treated at 250℃ for 1hr exhibited a decrease in the Erichsen index(IE)compared to the as-rolled sample,whereas PSA2 and PSA3 samples showed an increase in IE *** analysis revealed that most of the TTWs generated through pre-twinning were stable at 250℃;however,the twin volume fraction reduced to 41%at 350℃ compared to the PS samples due to enhanced thermal activity at that ***,PSA2 samples showed severe grain coarsening in some areas of the sample,and the fraction of such grains increased in the PSA3 *** stretch formability(IE value)of PSA2 samples showed a 32.3%increase compared to the as-rolled ***,the analysis of the deformed specimen at failure under the Erichsen test indicated that considerable detwinning occurs in the PS and PSA1 samples,whereas dislocation slip activity dominates in the PSA2 and PSA3 samples during stretch *** from detwinning and dislocation slip,deformation twins were also observed in all samples after the Erichsen ***,this work highlights the importance of texture control and its underlying mechanisms via pre-twinning followed by heat treatment and their impact on the room temperature(RT)stretch formability of AZX311 Mg alloy sheets.

关键词： Mg alloys Pre-twinning Texture Formability EBSD.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：