检索结果-南通市图书馆

Evaluation of red soil-bentonite mixtures for compacted clay liners

在线全文

学校读者我要写书评

暂无评论

Journal of Rock mechanics and Geotechnical Engineering 2024年第2期16卷 697-710页

作者： A.s.Devapriya T.Thyagaraj Department of Civil Engineering Indian Institute of Technology MadrasChennai600036India

Compacted clay liners are an integral part of the waste landfills.w.ich are provided to contain the leachate within the landfills and protect the surrounding ***,locally available natural soils are used for the construction of compacted clay liners if they satisfy the design ***,not all soils in their natural state satisfy all the design criteria for the liner ***,there is a definite need to modify the locally available natural soils by blending with bentonite to meet the required design criteria for the *** view of this,the present study evaluates the suitability of an Indian red soil enhanced with bentonite as a liner *** achieve this,a series of experiments.w.re carried out using locally available red soil and ***,the suitability of the red soil was evaluated as a liner *** experimental results showed that the red soil met all the selection criteria stipulated by the Environmental Protection Agencies(EPAs)for the liners except the hydraulic conductivity ***,the red soil was mixed with bentonite contents of 10%,20%and 30%,and the red soil-bentonite mixtures.w.re evaluated for their suitability for liners in their compacted ***,as the liners in the arid and semi-arid regions are subjected to moisture variations due to seasonal moisture fluctuations and other factors,the red soil-bentonite mixtures.w.re subjected to wetdry cycles,and their suitability was evaluated after wet-dry *** experimental results revealed that all the red soil-bentonite mixtures met the stipulated EPA criteria for the liners in the as-compacted ***,the red soil-bentonite mixtures.w.th 20%and 30%bentonite contents only satisfied the hydraulic conductivity requirement even after wet-dry *** experimental findings.w.re supplemented with the microstructural insights captured through digital camera images,scanning electron microscopy(sEm),and mercury intrusion porosimetry(m

关键词： Compacted clay lines Hydraulic conductivity wet-dry cycles microstructure

Ion heat transport in electron cyclotron resonance heated L-mode plasma on the T-10 tokamak

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Plasma science and Technology 2024年第4期26卷 52-60页

作者： V.A.KRUPIN m.R.NURGaliev A.R.NEmETs I.A.ZEmTsOV s.D.sUNTsOV T.B.mYALTON D.s.sERGEEV N.A.sOLOVEV D.V.sARYCHEV D.V.RYJAKOV s.N.TUGARINOV N.N.NAUmENKO National Research Centre“Kurchatov Institute” Moscow 123182Russia Bauman moscow state Technical University Moscow 105005Russia Institution“Project Center ITER” Moscow 123098Russia JsC“sOLAR” Minsk 220034Belarus

Anomalous ion heat transport is analyzed in the T-10 tokamak plasma heated with electron cyclotron resonance heating(ECRH) in second-harmonic extra-ordinary mode. Predictive modeling with empirical scaling for Ohmical heat conductivity shows that in ECRH plasmas the calculated ion temperature could be overestimated, so an increase of anomalous ion heat transport is required. To study this effect two scans are presented: over the EC resonance position and over the ECRH power. The EC resonance position varies from the high-field side to the low-field side by variation of the toroidal magnetic field. The scan over the heating power is presented with on-axis and mixed ECRH regimes. Discharges.w.th high anomalous ion heat transport are obtained in all considered regimes. In these discharges the power balance ion heat conductivity exceeds the neoclassical level by up to 10 times. The high ion heat transport regimes are distinguished by three parameters: the ratio Te/Ti, the normalized electron density gradient R/■, and the ion–ion collisionality νii~*. The combination of high Te/Ti, high νii~*, and R/■=6-10 results in values of normalized anomalous ion heat fluxes up to 10 times higher than in the low transport scenario.

关键词： tokamak L-mode electron cyclotron resonance heating ion heat transport

Proteome profiling to advance management of metabolic dysfunction-associated fatty liver disease

在线全文

学校读者我要写书评

暂无评论

Hepatobiliary surgery and Nutrition 2024年第1期13卷 147-149页

作者： mohammed Eslam Nahum méndez-sánchez ming-Hua Zheng storr Liver Centre Westmead Institute for Medical ResearchWestmead Hospital and University of SydneySydneyNSWAustralia Liver Research Unit Medica Sur Clinic FoundationMexico CityMexico mAFLD Research Center Department of HepatologyThe First Affiliated Hospital of Wenzhou Medical UniversityWenzhouChina Institute of Hepatology Wenzhou Medical UniversityWenzhouChina Key Laboratory of Diagnosis and Treatment for The Development of Chronic Liver Disease in Zhejiang Province WenzhouChina

metabolic dysfunction-associated fatty liver disease(mAFLD)is a complex,heterogenous and progressive disease that is characterised by substantial phenotypic variability,which results in disparate clinical presentations and outcomes(1-4).Notably,only a proportion of patients.w.th mAFLD progress to the more advanced stages of the ***,the identification of the subgroups that have a high risk of disease progression is of paramount importance for clinical care,as.w.ll as drug development and clinical trials(5).

关键词： metabolic dysfunction-associated fatty liver disease(mAFLD) fatty liver disease(FLD) fibrosis proteome biomarkers

metabolomics for quality assessment of poultry meat and eggs

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Food Quality and safety 2024年第1期8卷 27-40页

作者： m.s.Yogeswari Jinap selamat Nuzul Noorahya Jambari Alf Khatib mohd Hishammfariz mohd Amin suganya murugesu Laboratory of Food safety and Food Integrity Institute of Tropical Agriculture and Food SecurityUniversiti Putra MalaysiaSerdangSelangor Darul EhsanMalaysia Department of Food science Faculty of Food Science and TechnologyUniversiti Putra MalaysiaSerdangSelangor Darul EhsanMalaysia Department of Pharmaceutical Chemistry Kulliyyah of PharmacyInternational Islamic University MalaysiaKuantanPahang Darul MakmurMalaysia Faculty of Pharmacy Airlangga UniversitySurabayaIndonesia Department of Veterinary service malaysia Federal Government Administration CentrePutrajayaMalaysia

The poultry industry is experiencing rapid growth *** accelerated growth has led to multiple food fraud incidents across the food supply chain,which consequently created a demand for precise determination of quality poultry *** increase in demand for precise poultry production quality has necessitated advanced *** has emerged as a viable solution by offering detailed differentiation of biochemical indicators throughout the poultry supply ***,this study provides a means to address risk factors affecting the poultry industry without compromising animal welfare,which is a critical *** review focuses on important issues related to poultry product quality *** adulteration has escalated in recent years as it is driven by the increasing focus on consuming high-quality and nutritious ***,there is no specifc guideline for such determinations,especially when appearance,texture,and taste can be manipulated by substituting for food *** can pave the way for a deeper understanding of existing and novel biochemical indicators responsible for determining the quality of poultry meat and *** approach holds the potential to enhance the overall quality of poultry meat and egg products.w.ile also preventing food fraud.

关键词： Poultry metabolomics welfare application authentication.

Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4si alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of minerals,metallurgy and materials 2024年第2期31卷 362-373页

作者： F.Akbari m.Golkaram s.Beyrami G.shirazi K.mantashloo R.Taghiabadi m.saghafi Yazdi I.Ansarian Department of metallurgy and material science Imam Khomeini International University(IKIU)Qazvin ***Iran

The main objective of this.w.rk was to modify the microstructure and enhance the tribological properties of a new Zn-4si al-loy through a high solidification cooling rate(sCR).According to the results,by increasing the sCR from 2.0 to 59.5℃/s the average size of primary si particles and that of the grains reduced from 76.1 and 3780μm to less than about 14.6 and 460μm,***-ing the sCR also enhanced the microstructural homogeneity,decreased the porosity content(by 50%),and increased the matrix hardness(by 36%).These microstructural changes enhanced the tribological *** instance,under the applied pressure of 0.5 mPa,an in-crease in the sCR from 2.0 to 59.5℃/s decreased the wear rate and the average friction coefficient of the alloy by 57%and 23%,*** wear mechanism was also changed from the severe delamination,adhesion,and abrasion in the slowly-cooled alloy to the mild tribolayer delamination/abrasion in the high-cooling-rate-solidified sample.

关键词： zinc-silicon alloy primary silicon solidification cooling rate tribology sliding wear

Influence of erbium on structural,and charged particles,photons,and neutrons shielding properties of Ba_(1-x)Er_(x)snO_(3) perovskite ceramics

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第4期42卷 724-732页

作者： m.K.h.Hamad Nidal Dwaikat m.H.A.mhareb m.I.sayyed R.m.Hamad Y.s.m.Alajerami m.A.Almessiere Gameel saleh Ahmad Hussein Alomari K.A.Ziq Department of Basic sciences School of Social and Basics SciencesAl Hussein Technical UniversityKing Abdullah II St 242Amman11831Jordan Department of Physics College of Engineering and PhysicsInterdisciplinary Research Center for Advanced MaterialsKing Fahd University of Petroleum&MineralsDhahran31261Saudi Arabia Department of Physics College of ScienceImam Abdulrahman Bin Faisal UniversityP.O.Box 1982Dammam31441Saudi Arabia Basic and Applied scientific Research Center Imam Abdulrahman Bin Faisal UniversityP0.Box 1982Dammam31441Saudi Arabia Department of Physics Faculty of ScienceIsra UniversityAmman11622Jordan Department of Nuclear medicine Research Institute for Research and Medical Consultations(IRMC)Imam Abdulrahman Bin Faisal UniversityPo.Box 1982Dammam31441Saudi Arabia medical Imaging Department Applied Medical Sciences FacultyAl Azhar University-Gaza CityPo.Box 1277Palestine Department of Biophysics Institute for Research and Medical Consultations(IRMC)Imam Abdulrahman Bin Faisal UniversityPo.Box1982Dammam 31441Saudi Arabia Department of Biomedical Engineering College of EngineeringImam Abdulrahman Bin Faisal UniversityPo.Box 1982Dammam31441Saudi Energy&minerals Regulatory Commission Amman11821Jordan

Five perovskite ceramics samples of Ba_(1-x)Er_(x)snO_(3) with x=0.00,0.05,0.10,0.15,and 0.20 were synthesized using the conventional solid-state reaction *** prepared samples.w.re characterized by X-ray diffraction(XRD),Fourier transforms infrared(FTIR),and UV-Vis *** shielding properties against ionizing radiation were also *** XRD analysis shows the perovskite cubic structure as the major phase in all *** FTIR reveals a distinctive band around 614-620 cm^(-1) ascribed to the antisymmetric O-sn-O ***-Vis spectroscopy was used to determine the bandgap according to diffuse reflectance,and the results display a fixed enhancement in the bandgap from 3.2 to 3.3 eV for all ***-ray shielding properties of the synthesized samples.w.re experimentally measured and compared with XCOm computational *** relative differences(Δ,%)between experimental and theo retical values are low and fall within the 0.446%-7.10%*** addition of Er leads to the enhanced density,neutron,and gamma shielding *** contrast,charged particles’shielding parameters gradually reduce with rising Er *** results suggest that Ba_(1-x)Er_(x)snO_(3) samples can be used in different radiation shielding applications.

关键词： Perovskite Ceramics Gamma ray shielding mass stopping power Rare earths

Natural Convection and Irreversibility of Nanofluid Due to Inclined magnetohydrodynamics(mHD)Filled in a Cavity with Y-shape Heated Fin:FEm Computational

在线全文

学校读者我要写书评

暂无评论

Computer modeling in Engineering & sciences 2024年第5期139卷 1505-1519页

作者： Afraz Hussain majeed Rashid mahmood sayed m.Eldin Imran saddique s.saleem muhammad Jawad school of Energy and Power Engineering Jiangsu UniversityZhenjiang212013China Department of mathematics Air UniversityIslamabad44000Pakistan Center of Research Faculty of EngineeringFuture University in EgyptNew Cairo11835Egypt Department of mathematics University of Management and TechnologyLahore54770Pakistan Department of mathematics University of SargodhaSargodha40100Pakistan Department of mathematics College of ScienceKing Khalid UniversityAbha61413Saudi Arabia Faculty of sciences The Superior UniversityLahore54000Pakistan

This study explains the entropy process of natural convective heating in the nanofluid-saturated cavity in a heated fin andmagnetic *** temperature is constant on the Y-shaped fin,insulating the topwall while the remaining walls remain *** walls are subject to impermeability and non-slip *** mathematical modeling of the problem is demonstrated by the continuity,momentum,and energy equations incorporating the inclined magnetic *** elucidating the flow characteristics Finite Elementmethod(FEm)is implemented using stable FE pair.A hybrid fine mesh is used for discretizing the *** and thermal plots concerning parameters are *** addition,a detailed discussion regarding generation energy by monitoring changes in magnetic,viscous,total,and thermal irreversibility is *** addition,line graphs are created for the u and v components of the velocity profile to predict the flow *** simulations assume the dimensionless representative of magnetic field Hartmann number Ha between 0 and 100 and a magnetic field inclination between 0 and 90 degrees.A constant 4% volume proportion of nanoparticles is employed throughout all scenarios.

关键词： Finite element method nanomaterials entropy mHD square cavity Y-fin

Common coupled fixed point theorem for two pairs compatible and sub-sequentially continuous mapping

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Ocean Engineering and science 2024年第4期9卷 401-407页

作者： H.m.Abu-Donia mona s.Bakry H.A.Atia Omnia m.A.Khater Raghda A.m.Attia Department of mathematics Faculty of ScienceZagazig UniversityZagazigEgypt Department of mathematics Faculty of ScienceTanta UniversityTantaEgypt Department of Basic science Zagazig Higher Institute of Engineering and TechnologyZagazigEgypt Department of Basic science Higher Technological Institute 10th of Ramadan CityEl Sharqia 44634Egypt

This study establishes a common coupled fixed point for two pairs of compatible and sequentially continuous mappings in the intuitionistic fuzzy metric space that satisfy theφ-contractive *** basic definitions and theorems have been used from some recent scientific papers about the binary operator,t-norm,t-conorm,intuitionistic fuzzy metric space,and compatible mapping for reaching to the paper’s purpose.

关键词： Intuitionistic fuzzy metric space φ-contractive mapping Compatible mappings Couple fixed point

Exploring van der waals materials.w.th high anisotropy:geometrical and optical approaches

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Light(science & Applications) 2024年第4期13卷 645-653页

作者： Aleksandr s.slavich Georgy A.Ermolaev mikhail K.Tatmyshevskiy Adilet N.Toksumakov Olga G.matveeva Dmitriy V.Grudinin Kirill V.Voronin Arslan mazitov Konstantin V.Kravtsov Alexander V.syuy Dmitry m.Tsymbarenko mikhail s.mironov sergey m.Novikov Ivan Kruglov Davit A.Ghazaryan Andrey A.Vyshnevyy Aleksey V.Arsenin Valentyn s.Volkov Kostya s.Novoselov moscow Center for Advanced studies Kulakova str.20Moscow 123592Russia. Emerging Technologies Research Center XPANCEOInternet CityEmmay TowerDubaiUnited Arab Emirates. Donostia International Physics Center(DIPC) Donostia/San-Sebastián 20018Spain. Institute of materials Ecole Polytechnique Federale de Lausanne1015 LausanneSwitzerland. Department of Chemistry Lomonosov Moscow State UniversityMoscow 119991Russia. Laboratory of Advanced Functional materials Yerevan State UniversityYerevan 0025Armenia. National Graphene Institute(NGI) University of ManchesterManchester M139PLUK. Department of materials science and Engineering National University of SingaporeSingapore 03-09 EASingapore. Institute for Functional Intelligent materials National University of Singapore117544 SingaporeSingapore

The emergence of van der waals(vdw)materials resulted in the discovery of their high optical,mechanical,and electronic anisotropic properties,immediately enabling countless novel phenomena and *** success inspired an intensive search for the highest possible anisotropic properties among vdw ***,the identification of the most promising among the huge family of vdw materials is a challenging quest requiring innovative ***,we suggest an easy-to-use method for such a survey based on the crystallographic geometrical perspective of vdw materials followed by their optical *** our approach,we found As2s3 as a highly anisotropic vdw *** demonstrates high in-plane optical anisotropy that is~20%larger than for rutile and over two times as large as calcite,high refractive index,and transparency in the visible range,overcoming the century-long record set by *** these benefits,As2s3 opens a pathway towards nextgeneration nanophotonics as demonstrated by an ultrathin true zero-order quarter-wave plate that combines classical and the Fabry–Pérot optical phase ***,our approach provides an effective and easy-to-use method to find vdw materials.w.th the utmost anisotropic properties.

关键词： anisotropy anisotropic high